Hello, good afternoon! My motorola xt 531 custom ROM with the TIM does not care, but it happened after I installed the ROM MANAGER and choose the option to backup my current ROM, now when I press the power button, it just vibrates and does not start! Does a Hard Reset resurrect it? If yes, how to give a HARD reset it manually?
Thank you in advance and excuse any errors in the text, my English is basic!
Someone knows gives HARD RESET on the XT 531? What are the keys?
Hey,
If you are still wondering, to reboot the motorola xt531 in recovery mode, turn it off normally, then turn it on pressing the power button plus both volume buttons (don't release them until you see the recovery menu)
Same problem...
I have the same problem as you, I think I've bricked my phone, someone knows how to unbricked it please!!!
I've installed an diferent recovery from rom manager, after that the phone didn't started again, is there any way to go back to last recovery or force the stock rom without phone's recovery.
Thanks.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Flash a stock sbf and you will solve the problem
Sent from my XT316 using XDA Premium App
Related
Ok, so I'm using [ROM] Cyanogen Gingerbread CM7 Final Sources (v14.5 + GPS Hotfix + Camcorder Fix) on my Mini Pro and it's going great, few minor hickups but nothing major...
That is until I select "Reboot into xRecovery" from the power down options. Selecting this, every time causes my phone to get bricked at the SE screen and I have to then use SEUS to get it working again, then root, then install xRecovery, then restore my backups.
Is there something I'm doing wrong here or has anyone else had this problem and been able to fix it?
mh not normal
if your device is broken you can press the hard reset button
it is over the battery thre must a little white point if you press it down for 5 sec
your phone would boot in xrecoverys if your device is bricked
to fix your problem with the reboot option
download the rom again and flash it again
are sure you make your factory reset and battery wipe
if you have still this problem ask slade about this problem
in his F.A.Q thread or in his ROM Thread^^
Thank you for the advice, I didn't actually know about the hard reset button, I had tried all combinations of the Power/Home/Back key as I'd read that somewhere on the SE forums and in here but it did nothing. I will try that next time thank you!
Will also try reflashing to see if that clears it up.
I have a rooted artrix and the other night i updated via OTA and now the phone wont boot. how can i fix this? any help would be nice
Yeah, that sounds about right. Can you get into rsd mode or anything??? Btw, please post this in Q&A. You will more than likely get flamed for posting in the wrong section.
#Sent from my God given Atrix 4G
i tired booting into recovery and iot says starting fastboot protcol support
There are lots of tutorials on here on how to unbrick your phone (depending on hard brick or soft brick)
Look through the Q&A section - http://forum.xda-developers.com/forumdisplay.php?f=1070
If you get an error message on your screen during regular boot, use the search tool in that forum to search for what it says. That should help narrow it down.
BTW: When booting into recovery, make sure you Hold Vol + down until it says "fastboot" on the screen, then press Vol + down until the words say "Android Recovery" and then press Vol + Up.
Warrior 3000 said:
I have a rooted artrix and the other night i updated via OTA and now the phone wont boot. how can i fix this? any help would be nice
Click to expand...
Click to collapse
try this my friend and good luck : http://forum.xda-developers.com/showpost.php?p=22583493&postcount=139
Installing the cm9 get stuck in rsd mode (failed boot 2) , can somene addres me to a guide or thread with working links.
regards...
I am having the same problem, what I did was pull the battery, wait a moment, then while holding down the volume down button turn on the phone. Be quick because once the fastboot notification comes up let off the volume button then using the volume down button scroll through till you see Android Recovry that is where I found Clockworkmod Recovery. I am now in the process of trying to reinstall jockersax's .3. beta. This is the first time I have run into this problem I will post more information. As I am not allowed to post to the developers forum can someone pass this info on as several folks have had the same problem. Thanks
Why would you flash anything besides stock roms with rsd anyways. I feel its just an unnecessary risk to brick your phone. Fast boot and cwm seem to be preferred
Sent from my MB860 using XDA
Hello,
I have rooted my device and then downloaded CWM and tried to install Cyanogen Mod, I have tried this before and it just rebooted with nothing happening. This time the device would not boot past the motorola logo. I took out the battery and attempted to boot but again the device got stuck at the moto logo.
Can anyone help?
I am terribly sorry if this has been asked before or sounds like a nooby question, desktops and laptops are more my thing, don't know as much about mobile devices. Also there are not many helpful threads on the internet as apparently this is an underrated phone :/
Thanks for any help
The Motoluxe page suggested I do this
1. Power up the phone by pressing the VOL UP + VOL DOWN KEYtogether + PWR KEY
2. The device will start up with Motorola logo and power up to a little Androidman logo with Exclamation mark
3. Tap the HOME soft key at the bottom of the device (In between the MENU andthe RETURN soft keys)
4. The device will display BLUE Text on a Black background
5. Press the VOL DOWN key till the Wipe data / factory reset is selected andpress the PWR key to confirm the selection
6. Use the VOL DOWN key again to select YES - delete all user data and pressthe PWR key to CONFIRM
7. The device will then start performing the Factory Data Reset
8. Once the Formatting is complete , press the PWR key to confirm a REBOOT
9. The message rebooting is displayed on the phone
10. The device will reboot and start the normal power up sequence
Which does not actually work
McreativeH said:
Hello,
I have rooted my device and then downloaded CWM and tried to install Cyanogen Mod, I have tried this before and it just rebooted with nothing happening. This time the device would not boot past the motorola logo. I took out the battery and attempted to boot but again the device got stuck at the moto logo.
Can anyone help?
I am terribly sorry if this has been asked before or sounds like a nooby question, desktops and laptops are more my thing, don't know as much about mobile devices. Also there are not many helpful threads on the internet as apparently this is an underrated phone :/
Thanks for any help
Mac
Click to expand...
Click to collapse
1st thing, cyanogenmod has an inbuilt recovery. After installing cm u SHOULD NOT install any other recoveries. For now I believe u r soft bricked. U ll need to fxz back to stock to come out of it.!
Sent from my OC ed mind.!
Lifehacker7 said:
1st thing, cyanogenmod has an inbuilt recovery. After installing cm u SHOULD NOT install any other recoveries. For now I believe u r soft bricked. U ll need to fxz back to stock to come out of it.!
Sent from my OC ed mind.!
Click to expand...
Click to collapse
Okay so how do I fxz back to stock? Sorry this is my first android phone sorry to seem like a noob
McreativeH said:
Okay so how do I fxz back to stock? Sorry this is my first android phone sorry to seem like a noob
Click to expand...
Click to collapse
flash or odin stock rom
Victordevs said:
flash or odin stock rom
Click to expand...
Click to collapse
Do you think you could link me to a tutorial or something on how to do this please?
I read somewhere about holding Vol down and camera button while plugging in a USB cable so I tried it and this brought up a red screen with text that says
MBM Flash-mode.
IronMax
version: 0.1.11
Bootloader USB Init SECURE BOOT ENABLED
Click to expand...
Click to collapse
using the volume buttons on this screen does nothing, neither do the soft keys but pressing the power button says
Power key reset.
Click to expand...
Click to collapse
then it just gets stuck on the Motorola logo again
Please Help Me
We all know that to enter recovery we need to press vol up+switch+home...
But my phone doesn't switch on when i click only power button but instead enters recovery...
I tried to switch it off and on again from recovery and to reboot also....Cleared data cache and dalvik cache too....
Last time i went into recovery was using mobile uncle MTK tools.....
Please help my phone won't switch on
Did you try factory reset?
If that doesn't work, you'll have to download the device firmware from the sammobile site and flash it in download mode.
See your device forum for the detailed instructions.
Yes I factory reset it but still goes on with loop...
Can u give me a link for the firmware and flashing instructions please... Kind of a newbie in this matter
Sorry brother.......I showed you the way.......actions have to be yours.
Another hint......google. xda galaxy core
Must take you to the forum.
Spend some time there......you'll also find a q & a section dedicated to galaxy core.
There'll be a lot of helpful people as well.
If nobody helps, I will.
But again the actions have to start from your end.
And we can always talk via pm.
i will try my best....have downloaded official firmware...
will flash via odin ill get back if i need more help