I hope this is the right sub-forum to open this thread if not please movie it.
Half an hour ago I Got the 9.4.2.15 firmware update from asus. after the update was applied my prime asked me if I want to turn it off....I approved and the device shut down and stayed off.I tried to turn it on and nothing happened.
When I applied the update I had more then 80% of the battery.
I plugged the phone to the charger and the charger light on the power button changed from orange to green
While the Prime was charging(and after it was fully charged) I tried to do some stuf
I tried to press the on button and nothing happened and no vibration.
I tried to hold the on button for about 30 seconds and the only thing that happened is that I got a vibration(the same you get when you turn on your device).
I tried to reset the device with the reset hole near the microsd with a needle and nothing happened.
I tried holding the power button and the volume button(once the up and the other time the down) and nothing happened except the vibration after about 10 seconds.
ANY IDEAS?
*my biggest problem is I purchased the Prime from "Amazon US" and I don't leave in the us...How If I need do I use my ASUS warranty.who do I connect?
Thanks.
Try draining the battery completely then charging it back up. Then try to boot it up again. You might have a glitch or bug. Its always good after an update is applied to let it update then it reboots itself. After it loads back up,go into home screen. Then **** down device and cut back on. This will eliminate anything happening from rogue codes.
http://service.asus.com/InfoPage.aspx?rid=7
Good luck
demandarin said:
Try draining the battery completely then charging it back up. Then try to boot it up again. You might have a glitch or bug. Its always good after an update is applied to let it update then it reboots itself. After it loads back up,go into home screen. Then **** down device and cut back on. This will eliminate anything happening from rogue codes.
Click to expand...
Click to collapse
Any Idea how do I drain the battery, The Prime has now 100% battery and I am unable to turn it on...the screen stays black?
jdbaker82 said:
http://service.asus.com/InfoPage.aspx?rid=7
Good luck
Click to expand...
Click to collapse
Thanks.
Any more ideas?
*By the way I have the option to take the prime to a shop that could fix it, I am sure the problem is a software bug and not hardware...Should I try doing this because ship it to asus ans back will take about 3-4 weeks.
Try a hard reset and if that doesnt work do a search for this (EP201_SDUPDATE.ZIP)
ohwell said:
Try a hard reset and if that doesnt work do a search for this (EP201_SDUPDATE.ZIP)
Click to expand...
Click to collapse
I am unable to do "Hard reset" because the device do doesn't start, after pressing the power button nothing happens the screen stays black. the onle response I get from the device is vibration(after I hold the power button for about 10-12 seconds).
I don't think that "EP201_SDUPDATE.ZI" will help because I don't have accesses to my bootloader
Did you happen to drop the device or bang it pretty hard? If so, could be a chance the connector to your display is loose and device is actually on but the screen is off. Best way to check this is to connect your prime to your t.v. thru HDMI. Then try to cut it on. If something displays on your t.v. but screen still won't cut on, then connector came loose from your display. That is the best way to check. Plus you could also operate tablet like that.
Nope,didn't drop or hit it.
Unfortunately I don't have HDMI cable that connects to the prime.
your idea is good but even without the cable I am sure it's not the problem...but lets say that it is the problem...then if the device is actually on I should be able the hear the sound it makes when I use the volume buttons and when I receive new emails...the thing is I am unable to produce any sound from the device.
I just applied my update and it didn't ask me if I wanted to power down, it did itself. Did you power down when it was starting to install?
My screen did say "power down" but I knew it would do it itself.
Maybe like doing a battery pull during a flash?
Sent from my Transformer Prime TF201 using xda premium
Maybe you are right and for some reason I turned the device off while it was in the middle of the update... so 5hat means as you said that I interupted the flash process...in this case the problem is the software of the device ...could I do somthing to fix it without going with it to a lab?
Sent from my Galaxy Nexus using Tapatalk
You might try inserting a pin or a paperclip into the reset hole next to the micro SD port.
PROBLEM SOLVED!!!
I decided to try and fix my prime one last time before I use the warranty. so I took a needle SMALLER one then I used the first time I tried to "Hard reset" the prime and inserted it into the hole near the microSD port....and this time I felt a "click"...I pressed for about 10 seconds and then released and the screen turned on
I immediately got the screen withe the open green robot and with a blue line under it that showed me that the update was applied....then the screen changed to the screen you get when you turn on the device(asus symbol and tegra3 symbol) and again I got a blue line showing me that the update is going on.
After the blue line went foreword to 100% it disappeared from the screen and I was left with the screen you get when you turn on the device(asus symbol and tegra3 symbol).
I have waited for about 20 minutes and nothing happened....I turned off the device with the power button and then turned it on again(this time the device responded after 1-2 seconds)...I got a vibration and the screen was on(asus symbol and tegra3 symbol). after a few seconds the screen changed to another screen( another ASUS symbol with a turning circle under it) after about 8 seconds my device was fully working all my data was present(didn't reset with the needle should have deleted everything?) and my software number was 9.4.2.15,so the update was fully applied.
I tried turning on and off the device for a few times and had no problems with it.
So basically the device is working and I have no idea what was the problem
The tip i got for everyone trying to reset the device with a needle/paper clip....YOU HAVE TO FEEL THE CLICK
that's awesome! Congrats!
These are expensive toys (in my case addiction).
Maybe it was a bad flash which can be really spooky if you're not rooted with a custom recovery.
Sent from my Transformer Prime TF201 using xda premium
Related
Hi. The phone application was not functioning well and the F/C dialog showed up. I powered off the phone and from that point, the phone won't turn on.
The battery was fully charged before this happened.
When I press the power button, the phone vibrates for half a second, the screen brightens up but does not show anything but a black screen.
I removed SIM and SD cards, removed the battery and performed the above steps but nothing happened.
I also tried to put on the charger to see what's going on. Once I plug the charger, the phone's screen brightens but shows only blank (even without pressing the power button)
When connected to the charger, the green light for charging is on for some minutes, then goes off automatically.
I tried to connect it to the PC, and PC Companion finds the device as usually. It even shows the dialog on the pc screen to mount the device.
I tried a hard reset, but does not work
On some point, the sony logo appeared and then a dialog saying: "sorry process system is not responding". The first time I pressed Force Close and the phone turned off. Immediately after that, the phone turned on and showed the exact message. I pressed "Wait" but nothing happened in the next 15 minutes.
I called Sony's support center and they suggested a software update. Did the process exactly as it should, but again, even after the software update the screen shows nothing but black. It is all the time brightened for some reason.
I tried to turn off the phone for some time by removing the battery, but as soon as I put the battery back on, the phone's screen brightens and stays that way forever.
The phone was functioning perfectly up until this issue. The only application I had installed apart from some games, was AWDLauncher. On the screen I had only a TASK widget and a battery status widget.
The phone is 3 months old and has been always in perfect condition.
ANY help would be appreciated!!!!
Many Thanks
Try to format phone with this method hope it should work as it seems the issue is with OS only ..
http://forum.xda-developers.com/showthread.php?t=717949
Many thanks for the prompt reply. I will try to do so and let you know how it goes!
o0k00l said:
Try to format phone with this method hope it should work as it seems the issue is with OS only ..
Click to expand...
Click to collapse
I tried the steps found in the link you gave me, but I couldn't go any further after step no (5) from the tutorial, as it would require to enable Debugging mode and I cannot access the OS (since the device won't turn on).
Is there a way to format all the contents of the device and have them replaced by running SEUS (as it always says that my device is up to date now)?
Was it this:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
That Sony Ericsson told you to do?
If not, use that.
Download it, follow the steps when it says you have the latest version, press "Install Anyway".
Hope this works.
Hi itTim. thanks for the response
this is what i did but no improvement at all ((
Sounds like you broke your LCD screen somehow.
That would suck because I broke mine and it cost me $200 to fix.
Hi Hypercore.
Yes that could be the problem. The thing is that I always took rally good care of the phone, always carried in a leather pouch and never droped it. How sensitive is this lcd anyway?? Did you notice any cracks on your lcd or was the problem simillar to mine?
Thanks
When you turn on the phone does the lcd backlight turn on?
If so, look for any faint lines of color (usually a hairline size). If you see any of those then your screen is cracked.
the backlight is on, but there are no lines of colour on the lcd screen.
another weird thing is that the green light on the top blinks one or two times every time i put on the battery. even if the phone is off, once I insert the battery turns on automatically after a couple of seconds.
If all else fails you could try to flash back to your original fw with the tools here:
ht tp://forum.xda-developers.com/showthread.php?t=683793
AyDee said:
If all else fails you could try to flash back to your original fw with the tools here:
ht tp://forum.xda-developers.com/showthread.php?t=683793
Click to expand...
Click to collapse
That won't do anything.
I had almost the same issue. Nothing worked. But, when I removed the battery and left it for a day (24h) without it, it just started working again. Still working without issues..
Good luck!
Devtone said:
I had almost the same issue. Nothing worked. But, when I removed the battery and left it for a day (24h) without it, it just started working again. Still working without issues..
Good luck!
Click to expand...
Click to collapse
Phones are very wierd pieces of technology. I once bricked my k610i and that's a phone that's supposed to be impossible to un-brick, but out of nowhere a month or so later i picked it up, hit power and it turned on perfectly. Made no sense at all, but it worked.
Taking the battery out for a long time probably took all the electrical charges from it (kind of like how a computer power supply / monitor can hold power charges) and reset your handset.
Hypercore said:
Phones are very wierd pieces of technology. I once bricked my k610i and that's a phone that's supposed to be impossible to un-brick, but out of nowhere a month or so later i picked it up, hit power and it turned on perfectly. Made no sense at all, but it worked.
Taking the battery out for a long time probably took all the electrical charges from it (kind of like how a computer power supply / monitor can hold power charges) and reset your handset.
Click to expand...
Click to collapse
Indeed. It could be a frozen chip, memory fault, power-regulator and so on.
Hypercore said:
That won't do anything.
Click to expand...
Click to collapse
Ah, debug mode needed- I see now
tasaki said:
I tried the steps found in the link you gave me, but I couldn't go any further after step no (5) from the tutorial, as it would require to enable Debugging mode and I cannot access the OS (since the device won't turn on).
Is there a way to format all the contents of the device and have them replaced by running SEUS (as it always says that my device is up to date now)?
Click to expand...
Click to collapse
if you have done this and did not worked , then it is the LCD.
send it to workshop and check it there.
Guys i Really need the solve of this problem , my xperia has blank screen now without backlight and the phone completely doesn't work . when i put the battery and prees the switch botton it gives me 3 red signals , i've updated and hard reset but it didn't work , and btw the LCD is fine , any idea. did removing the battery worked???? . please answer
After a looooot of time since my latest post, finally my Xperia came back to life. There was a battery failure which means the phone was ok all the time. Weird thing is that the led light showed that the battery was charging ok. I removed the battery and after a lot of time it is working ok again. This was really really odd.
FYI for anyone else that gets this issue.
I just had this for the past hour after trying to change my baseband....could not get it back for anything.
What I did finally try was run another baseband via flash tool, connected to usb and it started flashing....after flash phone powered on again...yeah I agree with everyone, that is freaking scary when it happens.
Hi guys,
I have just received my transformer prime, I opened the box and tried to boot It but with no luck, it only vibrates.
I though initially that was a low battery issue, but now I have charged it fully (green light), and I'm still unable to boot it...
I have tried to boot it holding the power button for more than 30 seconds, and tried several times the normal way but with no luck.
Any advice?... is this a DOA?
Sigh.....this again. Just let it charge, it's fine.
RussianMenace said:
Sigh.....this again. Just let it charge, it's fine.
Click to expand...
Click to collapse
How much time?... I mean, the LED changed from orange to green... That means its fully charged right?
right now is reaching out almost 3 hours plugged into the wall...
BTW, the screen does not shows anything... some people mentioned a red battery icon, or something like that, but my screen is dead....
Could be your charger derping, there's more people with this issue.
Put it in a plastic bag and huck it in the freezer for a bit,
the thermal protection could be stuck.
David blaine street magic. Better yet, steve jobs apple magic
LOL. hold down the power button for more than 5 seconds and voila! You guys are too funny.
I have tried every possible convination of seconds while holding the power button... 5, 10, 20, 30, 1 min... POWER + VOLUME DOWN, but is just vibrating... does not shows _anything_ on the screen...
Not sure if the reset hole+papperclip is going to help, but I have been trying to find how it works but with no luck, I guess is a combination of button + pushing the reset, but not sure how...
Your screen could be defective. Or the ribbon might not be connected to the board.
Sent from my Sensation using xda premium
I have the same issue, just surprised that I can not use the product while it is plugged.
When i try to turn it on while it's plugged, it flashed and vibrated once showing battery bar and then died....now it just won't turn on!! AHHHHHHh!
Does this happen to other people. I heard you suppose to charge it for 6 hr before first use...but why can i not turn it on while plugged. Now All i see is the a red or orange LED light on the power button. Does it mean it is short circuited?
Can Someone confirm that this is normal.
I didn't bother charging straight away, with modern batteries there really isn't any need as far as I'm concerned. Of course people will tell you different but that's my opinion.
I had no issue with first boot, literally touched the power button for a second and on it came. Sounds like yours is no good.
Sent from my Transformer Prime TF201 using xda premium
Turned on!! Thank god!!!
Haranzo said:
Turned on!! Thank god!!!
Click to expand...
Click to collapse
huzzah, I'm happy for you.
Sent from my Transformer Prime TF201 using xda premium
Sounds busted to me OP. When I got mine I was going to let it charge fully before turning it on but as soon as I plugged it in it started booting. So I ran through setup while charging and just let it sit after that until fully charged...
Sent from my Transformer Prime TF201 using xda premium
Sokonomi said:
Could be your charger derping, there's more people with this issue.
Put it in a plastic bag and huck it in the freezer for a bit,
the thermal protection could be stuck.
Click to expand...
Click to collapse
Hi,
I researched a little bit more about the charger issues and to discard that, I left it charging today with another charger (I have two other Transformer 1). But I'm not holding my breath on that, the LED status is green, so I dont think is going to take more charging that what it currently have.
Thank you.
mutiny said:
Your screen could be defective. Or the ribbon might not be connected to the board.
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Hi,
Any way to check this withouth voiding the warranty?...
coolbomb said:
How much time?... I mean, the LED changed from orange to green... That means its fully charged right?
right now is reaching out almost 3 hours plugged into the wall...
BTW, the screen does not shows anything... some people mentioned a red battery icon, or something like that, but my screen is dead....
Click to expand...
Click to collapse
Hey man, that sounds a lot like what happened to mine. I was able to turn it on and set it up but then I fully charged it and rebooted..it never came back. The LED was green, I tried all the button combos etc...wouldn't even be recognized by my PC.
I've RMA'd it, you may need to do the same thing, sorry man...
LondonGentleman said:
Hey man, that sounds a lot like what happened to mine. I was able to turn it on and set it up but then I fully charged it and rebooted..it never came back. The LED was green, I tried all the button combos etc...wouldn't even be recognized by my PC.
I've RMA'd it, you may need to do the same thing, sorry man...
Click to expand...
Click to collapse
Hey, thank for the reply...
I'm going to try to plug it to the PC and see if I can get something from it.
I was also thinking about trying to drain the battery (as some other have done when the update came), but I dont see any decent way to do it...
The screen does not shows anything (so no battery drain in there), I dont see any other decent way to drain the battery but to burn my finger pressing the power button causing the the thing to vibrate and somehow drain the battery little by little... But I dont know how much is going to take to achieve it ... I'll probably lose my finger first.
Make sure you try holding the power button down for a long time. I had a similar reoccurring issue: http://forum.xda-developers.com/showthread.php?t=1427461
Try holding it down, there will be a buzz but don't stop holding it down until you see the boot logo. It can take holding it down a while. I kept thinking it was broken, but was just letting up too soon after the buzz.
UmbraeSoulsbane said:
Make sure you try holding the power button down for a long time. I had a similar reoccurring issue: http://forum.xda-developers.com/showthread.php?t=1427461
Try holding it down, there will be a buzz but don't stop holding it down until you see the boot logo. It can take holding it down a while. I kept thinking it was broken, but was just letting up too soon after the buzz.
Click to expand...
Click to collapse
I holded the power button, for about 2 min, and still I got nothing, I think this is going to end up as a return/refund
I'm so sad
Doesn't sound promising
coolbomb said:
I holded the power button, for about 2 min, and still I got nothing, I think this is going to end up as a return/refund
I'm so sad
Click to expand...
Click to collapse
Sorry man, after the huge wait we all had and the expectation, I have seen too many of these for comfort. I am no Apple lover, but somehow I can't imagine this kind of thing happening with iPads. Sure the occasional one in a thousand, but this is at least the 5th or 6th DOA I have read about. Seems that QC takes a back seat when demand is high: What? Those won't turn on? Throw them in a box, we need to get as many as we can out to Best Buy, they oversold the pre-orders. Let the poor guy RMA it!"
I was seriously afraid mine would be one of these, especially after they shipped it ground instead of the overnight I paid for. I guess I was a LITTLE more lucky, but no cigar either. I got one with no GPS functionality at all. Cannot even SEE, nevermind lock on any satellites both pre and post 8.3.33 update. Sigh. A "Premium Tablet" with horrible build and QC"
I hope you get a working replacement quickly. The guy who had an amber LED I knew would boot. Yours sounds like its running with no display like a few others I have seen. On guy had it drop 2 feet from on top of a pile of towels to a carpeted floor and his went into the same state. I think perhaps the video ribbon cable is easy to dislodge. Who knows... Get a new one, and give them hell to get it to you fast.
No Power
Just got my prime in the mail yesterday from best buy and I had the same problem. Wouldn't turn on right away so I charged it the full 8 hours and it still won't turn on at all...regardless of how long I hold down the power button. It only ever vibrates.
Called Asus tech support and he had me hold the power button for 8 seconds, let off power button, then hold down again until it turned on...but it never did. They want me to send the tablet in for repairs. That could take weeks. Best Buy won't do anything as they are backordered.
Many others have had this problem on androidforums.com. Asus really needs to address this
I found a couple posts about this but people seemed to just return or RMA it. Thought maybe my experience might help others and was curious if anyone else has this problem.
A few times I have picked up the Prime and hit the power button and the display would not come on. If I plugged it in I would see the green light on the power button come on and go off when unplugged. It appeared to still be attached to the WIFI. If I held the button down it would buzz, but nothing else.
I found out that if I held the button down, waited for it to buzz then continued to hold it down for another 30 secs or so (seems like it takes forever) the Prime would then reboot and I would get the Eee Pad boot screen.
I have been storing my Prime in the box to keep it clear of kids and cats until I get a case. My wife ended up picking up this cheap case from Walmart which used rubber bands around the corners, and this triggered the problem by holding down the volume up button. I have not been able to reliably reproduce it, but it seems like holding down the volume button (or combo of power and volume button) puts the device in some diagnostic mode or something that shuts off the screen.
The natural tendency to release the power button immediately after the buzz while trying to reset made the device seem like it was broken. Luckily I figured out how to start it back up so I did not return it or RMA; however I wonder how many others experienced this problem.
This appears to be a software problem and not a hardware issue. I have not had this happen since I started being cautious about the volume buttons, but have not tried to reproduce on the last firmware update.
I have had no other issues with the Prime. It runs great, WIFI works for me and I could care less about the GPS issue. However, this display thing has scared me a handful of times until I figure out how to reset it.
Anyone else have this kind of issue? I was going to wait for ICS and then see if I could reproduce it before calling ASUS, but it has not been crippling especially once I figured out that when all else failed just hold down the power button until the screen came back on.
I've had this problem as well, three or four times so far. Actually, it happened to me on the first full day I had mine, and was really freaking me out. I've been using the pinhole reboot button to get it working, but it sounds like you were more patient with the power button than I was.
I can't replicate it either, exactly, but I've noticed that it's only happened after extended periods (6+ hours) of inactivity without charging. I also looked at my battery usage last night, and saw that my device constantly is awake; maybe somethint's happening when it tries to sleep?
Anyway, I feel the same way you do - I'm waiting for it to happen on 4.0(.3?) before I really worry.
I've had this happen twice. held down the power button to reboot. I can't reproduce it either, but I don't have any problem with the device sleeping. I'm at 50 hours of uptime now (15 on current charge) and have not run into it. Mildly glad to see its not just me though.
TF201 | XDA Premium
Only once tonight. Scared me until I saw the boot screen. Interesting since it has been rock solid until this. No other problems just didn't turn on. Glad to be back working.
Sent from my Transformer Prime TF201 using Tapatalk
never had that issue...have used it quite a lot in many different situations
This morning it didn't wake up. I got it to turn on by holding get down the power and volume down button. Hopefully it doesn't happen again.
Sent from my Transformer Prime TF201 using Tapatalk
happened to me tonight freaked me out for a while - had to use the reset pin hole
I've had the same exact problem andthe funny thing is I also have a case from Walmart with the rubber bands. Is yours the case logic? Since reading this post, I've removed the upper left band. I wish my case would ship already!
guys if you're familiar with transformer 1 and hacking\custom ROM tegra devices power + vol up = apx mode kind of download mode blank screen, nothing wrong with the device just working like it should. now just a blank screen with sound when u plug in could be defective screen has happened to me
Awesome to know this is expected behavior.
I didn't have the original transformer, and googling has just led me to people who can/can't get into the mode, so I'll ask here: what exactly is apx mode? I get what it's for, sort of, but what is it?
also happened to me while it was in a case. maybe the power button was pressed too long or something...
this happened to me yesterday, except the screen is still off....tried everything mentioned and it wouldnt turn back on, its fully charged...i get no buuz sound or anything...
LOL, I was just searching for a thread like this.
Mine has been working flawless for the last 4 days. This morning, would not turn on. I tried every combo and button push I could think of.
No LED charging lights, nada.
I finally reverted to the paper clip in the reset hole. Booted right up.
Don't know what the issue is.
reset button wont even work for me...
Yes It happend to me yesterday twice... i think if we leave it for an extended period without out charge , the screen is getting locked somehow... both the times i have held the power button till the buzz.. then it rebooted....
Same behavior here, was fully charged in the Morning, and plugged in, when i got home Both LED's (Dock and Tab) were green but the Screen won't turn on, pressing the Power button for 10sec rebooted the device, maybe some kind of power saving feature... hopefully it will be fixed with ICS
Okay, rockstatus90's problem seems different, but the rest of us, pceasar explained that we're likely entering APX mode, right? It's designed behavior? Now I just want to know what APX mode is, and if there's an easier way to exit than rebooting.
Happened twice for me so far.
chinly43 said:
Okay, rockstatus90's problem seems different, but the rest of us, pceasar explained that we're likely entering APX mode, right? It's designed behavior? Now I just want to know what APX mode is, and if there's an easier way to exit than rebooting.
Click to expand...
Click to collapse
Yes this is normal. Although most other Android devices seemed to give some sort of on screen message.
It is mentioned here as a process of rooting the original TF:
http://eeepadhacks.net/transformer-hacks/how-to-root-your-eeepad-transformer/
Basically, this is a mode that outputs to your PC and is supposed to blank your screen. You are supposed to reboot afterwards, so there is no other way out.
I have not had the problem since being sensitive about pushing volume+ and power at the same time.
rockstatus90 said:
reset button wont even work for me...
Click to expand...
Click to collapse
Unfortunately it looks like return or rma is your solution. I would try to call Asus and see if they can troubleshoot it. Best case they can reset it for; worse case its dead.
Really wish you could pull the battery. Thats the sure fire reboot.
My friend that I bought the Asus prime for, asked me if I could take a look at his prime.
Here is the screnario:
Listening to radio station app, screen went to sleep while the radio was still playing and he tried holding the power button down and nothing worked to reboot or wake up the prime. The Prime was left playing to drain down the battery. It has all its recent updates (.15), not rooted, and not unlocked. When I looked at it, I charged it up, I can see the light and turned green to full battery status. I can feel the prime vibrate as I hold the power button, I tried volume + power hold, tried the hard reset with the paper clip hearing the click next to the sd card slot holding it for 10-30 seconds. The laptop can see the folder in the prime as i hold the power button and also disconnects when i power down. ordered 12-28 from best buy so the return window has expired and its a BC0K serial number.
Anybody find a solution with a black screen prime that just vibrates and can be seen on the laptop before I send it for an RMA?
Was there any shock to the device? A small bump or anything, it sounds like the ribbon cable for the screen has become disconnected, there are some reports of this on the forums.
flyingwolf said:
Was there any shock to the device? A small bump or anything, it sounds like the ribbon cable for the screen has become disconnected, there are some reports of this on the forums.
Click to expand...
Click to collapse
This + have you went into recovery?
maybe try draining the battery again then charging up. ive seen a few post issue like this. if screen connection didn't break, then letting it drain again and charging up might fix it. good luck!
Actually, the prime was already drained maybe a total of 3 times. There was no shock to the device as it was working with the radio app on and when it was being listened to while it was on the bed, the screen went into sleep and could not wake up no matter what button was being pushed so the prime was left to drain its battery. My friend didnt know how to reboot, so he decided to left the battery to drain. Could the radio playing + sleep of death + battery drainage caused the permanent screen sleep? Too bad I dont have the micro hdmi connector to see if i can isolate the screen as the problem.
yup the micro hdmi would help a lot probably. But if your PC recognizes it I suggest you back up data that you need then try to do a blind factory reset so you can get rid of any non oem app installed including that radio app if any of them is whats causing the screen not to turn on.
1. Hold volume down then press and hold power.
2. When you feel it vibrate (this could take up to 10 seconds if the tablet was already on) wait another 5 seconds and then release both buttons.
3. After you release wait another 5 seconds (dont wait too long here or it will reboot on its own if you dont select anything after about 10 seconds) then press volume down 1 time and volume up 2 times.
4. The tablet will factory wipe and after another 10 seconds it will reboot.
If the tablet still wont turn on then you got another issue and that isnt caused by the radio app or any other app.
Didnt work. It just vibrated and the screened stayed black... Im wrapping this puppy up and bringing shipping it to the repair center. Thanks anyways.
Vibrates when power button is held but wont turn on
My Prime also has the basic problem. I use it daily for about 3 to 4 hours, reading replying to e-mails and web browsing. While I was reading, the volume started going up on its own and I noticed that even after I put in standby mode, the battery discharged so I shut it down completely.
After that I could not turn it on. When I hold down the power button it vibrates bit the screen does not come on even after I fully charged till the led turns green.
logical_motion said:
My Prime also has the basic problem. I use it daily for about 3 to 4 hours, reading replying to e-mails and web browsing. While I was reading, the volume started going up on its own and I noticed that even after I put in standby mode, the battery discharged so I shut it down completely.
After that I could not turn it on. When I hold down the power button it vibrates bit the screen does not come on even after I fully charged till the led turns green.
Click to expand...
Click to collapse
Had to RMA back to Asus for them to fix the display and it took about a week. Warranty covered it, but if you do RMA ask them to ship you a shipping label. You shouldnt have to pay for shipping it to them for a manufacturer defect. And take pics and videos of the tablet and packing for your safety. They just need the tablet and nothing else. Good luck
Asus is F-ing with my endorphines...
I've had my TF201 since March 30th. Been using it for 1 week and it suddenly went dead (nothing on the screen, no vibration if I held the power button down). Tried everything I could find on the forums, it didn't work so I sent it to repairs (not immediately, cuz I had more important stuff to do). They kept it for almost 3 weeks, got it back this last Monday (May 21st) and... it died out on me again yesterday night (after just 3 days of use, congratulations ASUS technicians!). I was simply browsing and I clicked on the icon to increase the luminosity to the maximum supported (IPS+, I was charging it at the time) and the screen suddently went black. Like "nothing visible on it" black.
After that, I tried numerous times to reset it (including the volume+power down, according to the indications in this thread) - all I could get from it was the vibration as if it starts. Nothing else popping up on the screen. I plugged it this morning into my computer and it got somehow recognized, cuz my W7 tried installing drivers for it (even tho it had recognized the tablet again after it came from repairs and I already had drivers for it installed) but failed with the error "APX - no driver found".
I've had enough. Two months already and only one week and half of actual use. It's pathetic, ASUS needs to be taught a lesson, so I'm calling Consumer Protection in my country and the European Consumer Protection Comission. All the forums that I've surfed are filled with reports of broken units and ASUS will just tell you "if you have a valid warranty we'll repair it for free". I DON'T ****ING NEED regular repairs every 2 weeks!!! I need a functional tablet that I can use or give me my money back!
I'll post the results of my tribulations here...
I had a user that suffered the blank screen.
When you think it's presumably on. Try a paperclip to the reset hole on the left side. His came back up at that point and hasn't done it again since.
Never had this happen on mine.
Hi I'm really hoping someone can help me. I received a Sony z2 tablet spg521. I was told it was new but it would not power on or charge, and the charge light would sometimes blink red. Well I got the fixed or so I thought by doing a soft reset and then pc companion...sounded simple but spent a couple days trying to be successful. Sometimes my computer would recognize it sometimes it wouldn't.... Any way I finally got it out the blue dont know what the difference was I was just happy it finally worked... I then fully charged...yadayada and used it flawlessly for about a week... It would turn on and off, battery held charge like its supposed to, everything seemed to work.....then I went to power off but hit the restart by mistake....no there is no power again and this time it will not do a soft reboot.....no light ever....computer will not recognize ever....I have been trying off and on for a few days.....among-est my research to try to correct it seems like this is very common....when i shut it off the battery was over 50%..so how can something work fine then just die like this??? Ive seen that sometimes with sony if you disconnect the battery and the reconnect this will work... does anyone know? does anyone have any advice before I take apart this cherry tablet to try the battery thing???
I would really appreciate any insight as I have fixed many of my own problems and for others from advice on this site. Have a wonderful day and thank you!!! :silly:
ok today i tried to use flash-tool that Ive read about on this site....when it asked to plug n device computer recognized it and red light came on, but flash-tool did not recognize it....torn between letting it set and seeing what happens or trying to get the flash-tool to work, I chose the flash-tool...bad mistake when I went to try to reconnect and see if the FT would see it..it was no longer recognized by the computer and no light but computer did say USB device not recognized and not installed correctly.....now I already have the right drives so now Im really confused..tried a couple more times with same results and then once again nothing...no light no soft reset no recognized at all by computer not even not recognize USB....so disappointing loved the tab but this is insane that sony does this as its not user error but sony error and they dont even man-up and try to make it like you dumb or something....will try again..when i calm...
reset the device by pressing power+volume(up or down) for several seconds. It seems like a toasted one, possibly caused by putting magnetic charger on wrong polarity.
Thank you yes Ive tried all kinds of resets I have found...I agree seems fried but I would not know how. I have not used a magnetic charger...only the regular sony one that came with it....
So last few days I have tried off and on again....now computer recognizes by making noise when connected and disconnected but does not show up...PCC does not recognize it.....flashtool says its connected in log but when it asks for it to be plugged in it never leaves the screen telling you how to connect....when I try to connect the charge light comes on for about 4-5 secs then turns off....still no vibrate when try to reset still no light when plugged to a charger.....I want to get another one but I am scared this will happen again....gonna chuck this one as if time is money then I have well exceed the worth in time... I only got this because some time ago a sony z1 came my way and I so love it...i recently upgraded to z3.....i have a lg pad but screen got broke so I got the sony tab....maybe Ill just fix the lg
perrytallirico said:
So last few days I have tried off and on again....now computer recognizes by making noise when connected and disconnected but does not show up...PCC does not recognize it.....flashtool says its connected in log but when it asks for it to be plugged in it never leaves the screen telling you how to connect....when I try to connect the charge light comes on for about 4-5 secs then turns off....still no vibrate when try to reset still no light when plugged to a charger.....I want to get another one but I am scared this will happen again....gonna chuck this one as if time is money then I have well exceed the worth in time... I only got this because some time ago a sony z1 came my way and I so love it...i recently upgraded to z3.....i have a lg pad but screen got broke so I got the sony tab....maybe Ill just fix the lg
Click to expand...
Click to collapse
Mine is kinda toasted and this is how it works. Whenever I have a problem, I have to reset by pressing power + volume up, as soon as I hear three vibrations, I turn it on by pressing power button. Otherwise this tablet will just repeat sony logo and no boot. If you have bought one "NEW" make sure to return or replace it. If you want to enter fastboot mode, repeat the resetting routine and pressing power button to turn on, but also right after that or even simultaneously press volume up to enter fastboot mode with usb cable inserted, or volume down to enter flash mode. either way, your unit is toasted and sony sucks.
Well, I have the same problem, and isn't fun. Just very extreme rare cases it turns on the screen charging the battery, but doesn't turn on sadly
I did a happy boot today after 3-4 months off with several times trying turn it on, and did all the tricks from all treats about SOD
Last weekend I did a full charge from deep red to green light and battery animation on screen at start, but no luck.
I put it back in the box
This weekend I got some visitors, one of them asked about the tab, told him it didn't work and showed to him
Pressed the power button and to my WERY BIG surprise, it vibrate and turned on as nothing was wrong
The battery was only 54% after one week off. it received a update (264) and I installed as normal, turned off and on again as normal and happy I was
Sent from my SGP521 using XDA Free mobile app
DDz_1888 said:
Mine is kinda toasted and this is how it works. Whenever I have a problem, I have to reset by pressing power + volume up, as soon as I hear three vibrations, I turn it on by pressing power button. Otherwise this tablet will just repeat sony logo and no boot. If you have bought one "NEW" make sure to return or replace it. If you want to enter fastboot mode, repeat the resetting routine and pressing power button to turn on, but also right after that or even simultaneously press volume up to enter fastboot mode with usb cable inserted, or volume down to enter flash mode. either way, your unit is toasted and sony sucks.
Click to expand...
Click to collapse
thank you