Hey plz tell me in detail how do i install custom rom (most stable with excellent performance) in my lg p500!!!
plz answer in detail including how do i wipe sd card and all
THnx in advandee
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button
virusshah1997 said:
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
Click to expand...
Click to collapse
There's an option where it says "wipe" when you are in your recovery boot you should enter that category and wipe what the developer says.
Also there should be a guide of how to flash cm7 onto your phone in the thread itself
There shouldn't be any problem .
Do you mean you do not know how to enter recovery boot menu?
If so, open your terminal emulator and type
su
reboot recovery
It will reboot your phone to recovery boot.
Then wipe what the developer asks you to wipe,
make the partition on your sd card wether its ext2/3/4
Then flash it.
danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
........
Click to expand...
Click to collapse
Sorry i had cut down your post a little bit, as i was quoting it
Thanks from my side
As you made it very easy for us to understand on how to flash with custom roms
danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button
Click to expand...
Click to collapse
When ever i type
su
sh /sdcard/rf.sh
It say not found
iamrajeev said:
When ever i type
su
sh /sdcard/rf.sh
It say not found
Click to expand...
Click to collapse
HeY!
Have u copied files on root of ur sd card?
(on sdcard not in any folder)
Extaract it and den copy it
it in root..i coped there & than extracted
iamrajeev said:
it in root..i coped there & than extracted
Click to expand...
Click to collapse
add me in fb.... i will teach u
id de add kar leta
virusshah1997 said:
add me in fb.... i will teach u
Click to expand...
Click to collapse
good virusshah good to see u helping enjoy
Well i'm new to xda-developers, so i'm not going to give u such a perfect thing..
i bought this 'Evertek everglory' hoping that i'll find Good custom roms until i knew that this isn't very popular phone.
here i am today introducing a custom rom wish is compatible with this phone: 'Evertek Everglory, Fly iq442, wiko cink slim..
your phone needs to be rooted and a recovery installed in like CWM recovery.
Instructions:
1) Copy the .zip file into SDcard
2) Reboot your phone into recovery mode
3) Wipe data- Factory reset
4) Wipe cache partition
5) Go to mount and storage and do: format cache
format data
format system
6) Go back and choose: install zip from sdcard
7) Choose zip from sdcard
8) Navigate to your downloaded file and install it
enjoy the feeling of having an Xperia Z on an evertek everglory )
Hit thanks button if i did help u ))
this mod is the best for ginger bread
i tried and using this
its not my mod
its developed by redstriker
original thread-http://forum.xda-developers.com/showthread.php?t=2296428
hit thanks if helped
Requirement:
1) Rooted device!
2)CWM for flashing rwoksome engine!
3)Root explorer!!
NOTE:BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
Also,if you are using any custom mod please REMOVE it,beacuse there are chances of getting bootloop!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER!
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 2.3 or Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_xx.so(2.3 is gb,4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7) Now install ViPER4Android_XHiFi.apk
8) Reboot!
9)Open VIPER.apk>> Enable viper engine,Set your own parameters and ENJOY!!!!!!
Today I'm Gonna Show you how to install ESPIER apps all in one
You need :
- Rooted phone
-CWM
>>>>> You can download the zip file from the Attachment<<<<<<
Install instruction
1. Put the Zip file in your phone
2.Go to CWM recovery
3. install ZIP from sd card > choose zip from sd card > Choose the zip that you download and install it
4. reboot system now
5.HIT THANKS if that works
Jawad Twam said:
Today I'm Gonna Show you how to install ESPIER apps all in one
You need :
- Rooted phone
-CWM
>>>>> You can download the zip file from the Attachment<<<<<<
Install instruction
1. Put the Zip file in your phone
2.Go to CWM recovery
3. install ZIP from sd card > choose zip from sd card > Choose the zip that you download and install it
4. reboot system now
5.HIT THANKS if that works
Click to expand...
Click to collapse
I'm trying not to assume the worst, but maybe, for some reason, you didn't know that posting paid apps for free is not tolerated here and is considered warez or piracy. Please refer to the guidelines here:
http://forum.xda-developers.com/announcement.php?a=81 #6
and remove your zip.
Dual Boot Patcher - Dual boot any ROMs on your Galaxy Grand Prime VE
Huge thanks to @chenxiaolong for his wonderful app, bringing a new life to our device
Now let's get started!
This app patches...
Custom kernels for dual boot support
ROMs so that they can be installed as secondary
Google Apps packages for AOSP-based ROMs
SuperSU so that it can be used in the secondary ROM
NOTE: If you want to dualboot a TouchWiz ROM, I highly recommend installing TW as the primary ROM. Otherwise, any mods will need to be patched before flashing.
How to use the patcher
Android
Download the patcher apk and run it. Tap "Patch Zip File" from the navigation drawer and choose the file you want to patch.
Windows (GUI)
Double click DualBootPatcher.exe and choose the file you want to patch.
--------
After patching the zip file, a new file, like some_rom_dual.zip file will be created. For example, patching ktoonsez's
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013.zip
would create a new
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013_dual.zip
Instructions for dual booting
Before doing anything, download the Dual Boot Patcher app and the DualBootUtilities.zip from the download section below.
The patcher offers several locations for installing ROMs:
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage.
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
Extsd-slots: There can be an unlimited number of extsd slots. These install to the external SD card, which is useful as it keeps the ROMs off of the internal storage. Note that the ROM's data files are still stored on the data partition.
With that said, let's get to the "how to"!
First, boot into your primary ROM and install the Dual Boot Patcher app
Open the app and go to "Roms" in the navigation drawer. It will ask if you want to set the kernel. Make sure that you do.
Go to "Patch zip file" in the navigation drawer and patch the ROM or zip you want to install. You can select one of the installation locations described above.
There are two ways of flashing the patched zip file. You can either flash it normally from recovery or flash it using the in-app flashing feature. Both methods are explained below.
Flashing from recovery
To flash from recovery, just flash the patched zip file like you would for any other zip. Nice and simple.
In-app flashing
To use in-app flashing, go to "Roms" in the navigation drawer, tap the floating button on the bottom right, and add the zips you want to install. You can queue multiple zips and they will all be flashed in one go. Once you've added all the zips you want to flash, click the check mark in the action bar and they will be flashed right away.
A normal backup from recovery will backup every ROM. If you would like to back up ROMs individually, please see @rlorange's awesome tool: http://forum.xda-developers.com/showthread.php?t=2491299
How do I...?
Switch the ROM if something doesn't work properly?
You can flash the DualBootUtilities zip from recovery. It will provide a menu interface that allows switching to the various ROMs.
If you have TWRP, you can also switch manually by tapping Install -> Images (bottom right) -> Go to /sdcard/MultiBoot/[Your ROM]/ -> flash boot.img.
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Alternatively, flash the DualBootUtilities zip from recovery, which will also allow you to wipe a ROM.
NOTE: Don't use the recovery's built-in wiping abilities as that may delete non-primary ROMs!
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Downloads:
[LINK] Dual Boot Patcher
Source code:
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
Build instructions: https://github.com/chenxiaolong/DualBootPatcher/tree/master/docs
XDA:DevDB Information
Dual Boot Patcher, App for all devices (see above for details)
Contributors
doesntexits, chenxiaolong
Source Code: https://github.com/chenxiaolong/DualBootPatcher
Version Information
Status: Testing
Created 2016-12-20
Last Updated 2016-12-20
Reserved
Reserved
Thank you.