Related
How do I restore back to R2BA020 after rooting my phone?
Sony Ericsson tools won't let me restore back again?
Findee said:
How do I restore back to R2BA020 after rooting my phone?
Sony Ericsson tools won't let me restore back again?
Click to expand...
Click to collapse
well u can either have root or the r2ba020 firmware.
choice is urs.
if u want root stick to the instructios.
if u want r2b then follow jerpleas guide to flash r2b firmware on the x10.
chetan
Where is jerpeleas guide? Is that the one for flash tool? Because I can't get it to work :S
Findee said:
Where is jerpeleas guide? Is that the one for flash tool? Because I can't get it to work :S
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=683793
i have the same problem i dont lake the root its to early to root my phone feels like crap now i want to go back to x10i bo20 firmware i know optimus is the best way to flash back to original roms but i want to make sure do we have to use decrypted roms or original shipped roms thats the bit i dont quite understand i think decrypted though.
jutley said:
i have the same problem i dont lake the root its to early to root my phone feels like crap now i want to go back to x10i bo20 firmware i know optimus is the best way to flash back to original roms but i want to make sure do we have to use decrypted roms or original shipped roms thats the bit i dont quite understand i think decrypted though.
Click to expand...
Click to collapse
decrypted..
thanks for the quick reply do we have any experts here on optimus flashing a easy guide would be nice what and which files go where when they are downloaded really confusing what to do with the decryprted files do we leave them in the zip format or do we have to unzip them we them end up with loads of files if they are unzipped.Hope someone can shed abit of light on optimus as i can see this is the easy and free way to get back home.
jutley said:
thanks for the quick reply do we have any experts here on optimus flashing a easy guide would be nice what and which files go where when they are downloaded really confusing what to do with the decryprted files do we leave them in the zip format or do we have to unzip them we them end up with loads of files if they are unzipped.Hope someone can shed abit of light on optimus as i can see this is the easy and free way to get back home.
Click to expand...
Click to collapse
Think you mean Omnius?
Check this post for set up. http://forum.xda-developers.com/showpost.php?p=6789689&postcount=324
Download decyrpted fw.
Hope this helps.
jutley said:
thanks for the quick reply do we have any experts here on optimus flashing a easy guide would be nice what and which files go where when they are downloaded really confusing what to do with the decryprted files do we leave them in the zip format or do we have to unzip them we them end up with loads of files if they are unzipped.Hope someone can shed abit of light on optimus as i can see this is the easy and free way to get back home.
Click to expand...
Click to collapse
can do two ways.
one download the decrypted files. unzip it, use the flash tool provided by jerplea.
if u have the rom files as downloaded by seus then u can use seus to update or omnius.
in omnius the larger file goes in the first box and the smaller in the next.
jutley said:
thanks for the quick reply do we have any experts here on optimus flashing a easy guide would be nice what and which files go where when they are downloaded really confusing what to do with the decryprted files do we leave them in the zip format or do we have to unzip them we them end up with loads of files if they are unzipped.Hope someone can shed abit of light on optimus as i can see this is the easy and free way to get back home.
Click to expand...
Click to collapse
can do two ways.
one download the decrypted files. unzip it, use the flash tool provided by jerplea.
if u have the rom files as downloaded by seus then u can use seus to update or omnius.
in omnius the larger file goes in the first box and the smaller in the next.
Unzip the original zip file so there is 2 files - phone.zip and R1FB001.zip (or whatever its called). In Omnius for the "application" file choose the R1FB001 File and for the "customization" file choose phone. Zip. You really cant go wrong
Found the answer i was looking for above
cvchetan said:
can do two ways.
one download the decrypted files. unzip it, use the flash tool provided by jerplea.
if u have the rom files as downloaded by seus then u can use seus to update or omnius.
in omnius the larger file goes in the first box and the smaller in the next.
Click to expand...
Click to collapse
seus does not work have already tried it blags on about firmware already up to date tried all the methods i am comming from root back to x10i latest firmware so seus is no good ominus is the way to go back if anyone wants to go back after they have rooted and dont like it.
I managed to restore back again. I just copied the .sin files in from a decrypted firmware into the step 1 folder then ran step 1.bat
Works like a charm
I can now repair in Sony Ericsson Updater again
How many . Sin files what about zip file that is named phone can u give details of files to replace
I was able to successfully unroot my x10a with omnius. And then I updated to the x10i firmware again Going to wait until full root is achieved and stable.
jutley said:
How many . Sin files what about zip file that is named phone can u give details of files to replace
Click to expand...
Click to collapse
Well I used R2BA020 for flash tool version.
From the large file I copied across the system file which had a really long name so I renamed it to system.sin
From the smaller file I coppied;
amss_fs.sin
apps_log.sin
amss.sin
fota0.sin
fota1.sin
recovery.sin
dsp1.sin
boot.sin
cache.sin
Then I ran step 1.bat again and then I just repaired in Updater Tool.
Hope this helps.
thanks Findee! works for me.
Really sorry if I'm hijacking the thread.. I recently rooted and I don't really like root right now so... Figured it would be a waste to start a whole new thread again.
Just so I'm sure I'm doing it right.. I have the two O2 R2 firmware files I used to debrand my X10 with PC Companion.
Can I use these in Omnius? They don't seem to show up as "compatible file" types when browsing for them. However the ones that are in zip format are.
Which ones do I use? The ones from the debrand method or the "flash tool" files.
Use the decrypted zip ones in in optimus very simpley
thanks Findee!!!!
http://api.viglink.com/api/click?fo.../?d=YWCRNFNW&jsonp=vglnk_jsonp_13247094610451
Uploaded by twobrare, Thank You!
This seems to be the phone info for it. Confirmed by twobrare.
http://forum.xda-developers.com/showpost.php?p=20360381&postcount=40
As best as I can tell nobody has tried the OEM Unlock from the Atrix forum. Jtbowers and others care to try? http://forum.xda-developers.com/showthread.php?t=1136261 @ bottom look for Fastboot (green) for DL and 2 pics.
Tenfar's CWR confirmed to work.
Not this phone MB867
http://forum.xda-developers.com/attachment.php?attachmentid=794366&d=1322202591
OEM Unlock not implemented http://forum.xda-developers.com/showpost.php?p=19680406&postcount=15
Also will not boot into CWR w/Tenfar's
AND SURELY NOT FOR our DX2 MB870?? http://forum.xda-developers.com/showpost.php?p=19681262&postcount=16
Anyone feeling lucky?
skwoodwiva said:
http://api.viglink.com/api/click?fo.../?d=YWCRNFNW&jsonp=vglnk_jsonp_13247094610451
Uploaded by twobrare, Thank You!
This seems to be the phone info for it.
http://forum.xda-developers.com/showpost.php?p=20360381&postcount=40
Not this phone MB867
http://forum.xda-developers.com/attachment.php?attachmentid=794366&d=1322202591
AND SURELY NOT FOR our DX2 MB870?? http://forum.xda-developers.com/showpost.php?p=19681262&postcount=16
Anyone feeling lucky?
I expect twobrare to chime in to confirm my info as he did not post a SS.
Click to expand...
Click to collapse
The information that he has is correct on the SS for the Milestone X2. The PRL 2100 is an nTelos PRL.
Thanks for posting this link, I'm glad someone finally got this up online, now I can bring my phone to an usable state without worry
Sent from my Milestone X2 using Tapatalk
Does anyone know if this file has been uploaded anyplace else, or can someone upload it some place else? I'd like to try and use it on a bricked Milestone X2.
---------- Post added at 03:56 PM ---------- Previous post was at 03:24 PM ----------
Thanks to skwood for sending me this:
https://rapidshare.com/files/3854789...-ntelos-US.sbf
Unfortunately it is downloading at a snails pace but better than nothing.
rapidshare link is down now, anyone have another mirror?
https://rapidshare.com/files/385478...0.25-111011-release-keys-signed-ntelos-US.sbf
Works. Just a bad copy/paste.
skwoodwiva said:
https://rapidshare.com/files/385478...0.25-111011-release-keys-signed-ntelos-US.sbf
Works. Just a bad copy/paste.
Click to expand...
Click to collapse
You rock dude, thanks
I appreciate you uploading that file, however it is just a .sbf file and not compressed, I have tried downloading it three times, always failed toward the end. Rapidshare now says the file is unavailable, could someone upload a .zip .gz .7z .rar etc?
DLing to phone as I post. Just wait ~10 sec & choose DL to computer then choose free DL.
Edit ULing a RAR- will take ~3hrs.
skwoodwiva said:
DLing to phone as I post. Just wait ~10 sec & choose DL to computer then choose free DL.
Edit ULing a RAR- will take ~3hrs.
Click to expand...
Click to collapse
Thank you for uploading again, yes, I was able to start the download however it slowed to a crawl and failed numerous times.
https://rapidshare.com/files/169742...0.25-111011-release-keys-signed-ntelos-US.rar
Thank you! I was able to get that one downloaded, anyone have an MD5 of the sbf file?
No. I got the sbf from twobrare. He probably got it from his carrier .
I mean an md5 checksum of the file you or anyone else has so I can be sure my download wasn't corrupted, it started and stopped quite a few times.
The .sbf I have is: 15b998d663f1c21b68866f022aebaf3e
So I open the file I ULed in winrar & what?
skwoodwiva said:
So I open the file I ULed in winrar & what?
Click to expand...
Click to collapse
I'm guessing you're running windows, once you have the .sbf file unpacked run it through a program like MD5-Checker and it will spit out the md5 associated with the file, I can then compare it to mine to be sure the download wasn't corrupted.
Much later tonite then.
Understandable, I really appreciate your help
15b998d663f1c21b68866f022aebaf3e
Gen from my source file.
Thank you, looks like my download is good, again, I appreciate it.
Can someone re-up the stock recovery image for re-locking the phone using fastboot? multiupload link is down
Thanks
!!!LOOK HERE FIRST!!! Motorola Photon Compendium a.k.a. all things MoPho
please do not post questions in the dev section
I'm sorry but I am an not trying to be a *ick or anything. I know how XDA works and I wouldn't start this thread if I didn't have and issue. I started this thread because the link from the cwr thread for the stock_recovery.smg file is BORKED. I am not able to relock my phone without this file.
Please let me know were I can get it.
violinbf said:
I'm sorry but I am an not trying to be a *ick or anything. I know how XDA works and I wouldn't start this thread if I didn't have and issue. I started this thread because the link from the cwr thread for the stock_recovery.smg file is BORKED. I am not able to relock my phone without this file.
Please let me know were I can get it.
Click to expand...
Click to collapse
Do you want the stock *.SBF? I have the zip at work. The instructions wipe everything, including root and unlock, and put your phone back to the day you walked outta Sprint? I only have it because I had Emergenccy yesterday.
Anyway, send your e-mail to [email protected] and I will see what I can........Matter fact, deedscreen sent me different link to download. send me your addy.
David
!!!LOOK HERE FIRST!!! Motorola Photon Compendium a.k.a. all things MoPho 1/26/12
Unlock/Relock methods (takes you to post #6 or scroll down a little)
Root/Unlock/Relock Method and Files
Root-Unlock-Relock Pack 1/26/12
Download the Root-Unlock-Relock Pack and extract using 7zip. In the zip you will find all the files needed and the instructions. The only thing it doesn't have is full stock SBF's which can also be downloaded from my site.
ive downloaded all three of these files and they contain the stock image but when extracted it gives an error and says it doesnt exist. the other files extract fine???
edit: nvm had to use 7zip. winrar was giving me errors.
hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
cdma-india said:
hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
Click to expand...
Click to collapse
Is the phone able to get into download mode? Is the phone detected in Odin?
no its not going to download mode , tried with boot jig also nowdownload,no recovery ,no boot , 100% boot dead i have all gagjets for repair dead boot riff,easy jtag ..many more but no one support n900p only solution is now unbrick sd card image
wating
thanks
just making thread up...some one please
here is method how to creat unbrick image plz try and upload to any safe place ,it require working n900p handset with cwm install
http://forum.xda-developers.com/showthread.php?t=2624203
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Anthonicia said:
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Click to expand...
Click to collapse
He doesn't need to boot into there to use a recovery sdcard. Me, @noobtoob, @msmercy42, and others (very sorry for those I forgot to mention, I have a very limited memory!!!) took tricks that the N900A guys got for a hard brick solution and came up with one for the N900T. Now, we're assuming this can be ported out to all other N900X variants but this still has yet to be tested. It involves grabbing about 200MB from mmcblk0 and writing it to an sd card. Not just copying it, but doing a raw write of the image file to an sdcard via the dd if command in either terminal emulator or a Linux OS environment.
If someone here has a N900P, I'd be glad to walk them through the process of creating a unbrick image for the OP. It copies over bootloader information to boot from the SD card, not the device. NO SENSITIVE EFS INFORMATION IS COPIED!!! This method has been done enough times to say that at least. .
OP: when you plug your device into your computer do you at least get a QCHSUSB port or the notification that a device has been recognized by Windows? If so, this method should work. If not, you may have a hardware fault.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Anthonicia said:
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Click to expand...
Click to collapse
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Just waiting for it to upload and I will pm you a link.
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Sent it to u via pm. Let us know if it works.
Wow work in first shot u r great
thanks again
u saved my phone
That's great! Glad to help.
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Sent from my SM-N900P using xda app-developers app
evilvoice said:
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Click to expand...
Click to collapse
You can make your own if you follow the link op posted in his instructions.
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
ecs87 said:
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Anthonicia said:
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Click to expand...
Click to collapse
I had a Derpbox before. Hated it. Ran out of bandwidth within the first week of posting the L900 MK4 Odin file...psch. Switched to Mediafire and never looked back. Thanks for the file by the way. Got it hosted and here it is: https://www.mediafire.com/?8bruhax81uud9dj
Please need some help hard bricked and soft bricked
Hi guys I'm trying to unbrick my galaxy note 3 on mj4 I used above image had to add the .tar.img anyways I wrote it to a 8gb sd card and also a 64gb sd card both didn't work my phone is hard bricked and hard bricked because it stays stuck on the Samsung galaxy note 3 screen and when going in to recovery it says what the OP said and then mine keeps trying to root the phone with cf auto root every time I got lol in to recovery it does the same thing when I go in to download mode my computer doesn't recognize it I think it said unrecognized device so I can't flash anything with Odin any help is much appreciated as well as a donation
woops didn't put this in guides, sorry
This should work for any KDZ firmware of any LG Device, but figured I'd write this for the Wing, as so far, its the only LG phone I own and the one I'm most determined with
This is not a full Root Tutorial. This is a step in the correct direction though. These are the After-Steps, so bootloader unlock is still needed. Sorry
What You'll need
- KDZ Tools (see attachment -- virus total scan just because: https://www.virustotal.com/gui/file...zODc2ZTViOWQ1MTlmN2Q0NzFiMjI6MTYzNzgyMTYwNg==)
- Firmware KDZ file
- Magisk Manager installed on device that IS NOT your LG Wing (at least for me, explained below)
Instructions (video coming soon)
1.) Download KDZ Tools and extract them to a folder somewhere.
-- I usually make one on my external drive and drop stuff there, but desktop works too
2.) Download whatever firmware KDZ file you need
3.) Put that KDZ File in the same folder as the KDZ Tools
4.) Run "OneKeyExtraction.bat" and select Y if the KDZ is in the folder with this same file
5.) This takes A LONG WHILE and you need a good large bit of storage space available (50gb+) because the extraction goes raw format and some image files at first take up 20+GB as 1 file
6.) Once complete, you should have a folder named "F100X_usersigned_etc" ... open that to find your img firmware files. There's 31GB of IMG files here if its the Android 11 1020 KR FW
7.) Copy one of the boot.img to your device with Magisk Manager installed
-- The reason I stated on a different device, is that at least for me, Magisk Manager kept failing to patch on my LG Wing. When I put the boot.img on my OnePlus 7 Pro 5G, it patched just fine
8.) Open magisk manager, select Install, Select and Patch a File, select the Boot.img and patch it
9.) Once patched, that's a rooted boot.img, pull it off your device back to your computer and hold on to it for when we get a way to flash it and root the device!
root theory:
Interupting the LGUp flashing process of firmware when it gets to boot partitions to load custom boot.img's. How to do this exactly, not sure. If there's a way we can re-kdz these files from KDZ tool, that might work too
I can tell you right now, it wont work because the bootloader is locked. The hash of the patched boot.img on the phone won't match and you will get "Your device has failed a routine check, your phone is unbootable."
Sorry to debunk your theory. We need a firehose and a engineering bootloader.
Leronex_1 said:
I can tell you right now, it wont work because the bootloader is locked. The hash of the patched boot.img on the phone won't match and you will get "Your device has failed a routine check, your phone is unbootable."
Sorry to debunk your theory. We need a firehose and a engineering bootloader.
Click to expand...
Click to collapse
hey it was worth a shot
KaptinBoxxi said:
hey it was worth a shot
Click to expand...
Click to collapse
Sure need lg wing firehose , can help to find it??
Bahmale said:
Sure need lg wing firehose , can help to find it??
Click to expand...
Click to collapse
Don't even have a clue of where to look so I won't be looking for it
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
mercuris said:
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
Click to expand...
Click to collapse
you got a rare device then. I can't even load fastboot, just download mode for lgup.
mercuris said:
i've done it with
"adb reboot fastboot
adb flash boot_a boot_a.img
adb flash boot_b boot_b.img"
both boot img a & b patched with magisk and by the way the phone i bought come with unlocked bootloader
Click to expand...
Click to collapse
What model do you have? I.e. F100VM10i
Glad you got it working btw!
kaluna00 said:
What model do you have? I.e. F100VM10i
Glad you got it working btw!
Click to expand...
Click to collapse
screen shot in another section shows it was a verizon demo model by the looks of it. F100V
KaptinBoxxi said:
screen shot in another section shows it was a verizon demo model by the looks of it. F100V
Click to expand...
Click to collapse
This is from the Verizon model (non demo).
Also i accidentally added the software version earlier.
i accidentally delete some lg apps and the phone stuck in bootloop the other day so i restore the phone using lgup just selected the refurbished option, the phone restored still in unlocked bootloader mode
mercuris said:
i accidentally delete some lg apps and the phone stuck in bootloop the other day so i restore the phone using lgup just selected the refurbished option, the phone restored still in unlocked bootloader mode
Click to expand...
Click to collapse
Hi, are you willing to dump the bootloader from your phone? Because it looks like you have a development device, so it has an unlockable engineering bootloader that can be used to unlock other LG Wing and Velvet devices.
Wish39 said:
Hi, are you willing to dump the bootloader from your phone? Because it looks like you have a development device, so it has an unlockable engineering bootloader that can be used to unlock other LG Wing and Velvet devices.
Click to expand...
Click to collapse
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
mercuris said:
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
Click to expand...
Click to collapse
Others can help on our discord server, I'll admit I'm not well versed on dumping partitions through stuff like ADB.
https://discord.gg/Zw9Uk9DWE2
mercuris said:
i dun mind just i dunno how to do that, if you can guide me it would be nice, or you can show me the instructions
Click to expand...
Click to collapse
You can also contact @Leronex_1 he can help you with dumping the bootloader
will do what i can to contribute, no problem
mercuris said:
will do what i can to contribute, no problem
Click to expand...
Click to collapse
Thanks, I recommend to join the Discord server though since me and Leronex are not always online on XDA, we are more active on Discord since its a live chat platform, not a forum like XDA. If you dont have a Discord account you can just create one.
If anyone else is reading this you are welcome to join the server as well.
Wish39 said:
Thanks, I recommend to join the Discord server though since me and Leronex are not always online on XDA, we are more active on Discord since its a live chat platform, not a forum like XDA. If you dont have a Discord account you can just create one.
If anyone else is reading this you are welcome to join the server as well.
Click to expand...
Click to collapse
will do
kaluna00 said:
This is from the Verizon model (non demo).
Also i accidentally added the software version earlier.
Click to expand...
Click to collapse
Reason I guessed demo device is because of the 0'd IMEI, but I guess as a dev device, 0'd imei is gonna be there too
Any progress on this? Sounded like you guys were making some good ground and then the thread went a little bit cold. No pressure. Just checking in. Thanks and Merry Christmas!