Hi I rooted my device with CF ROOT and I wanted to unroot so I tried to restore back to orginal stock firmware with odin i downloaded the firmware put into download mode and tried to flash with odin
odin failed and now my phone is stuck on a black screen with a picture of a phone connecting to a computer with a exclamation mark in the middle of the two
please help me, i just want my phone back to stock firmware
thanks a lot
Reflash following the instructions .
jje
check firmware version and try to download it again. it could be corrupted copy. turn of your phone then put into download mode then try again with the new copy.
Related
Guys,
I've tried to update my Android's firmware from v2.2.1 to the ICS rom.
The issue started when I've tried to flash CWR through ODIN.
All procedures have been done: loaded the cooper, and the CWR .tar, put my mobile on Download Mode, plugged USB, Odin showed <1> Added!!! <1> Detected!!! and hit the Start button.
After waiting for about 30min there was no response from ODIN, then, I removed the USB and closed ODIN. After that I turned on my Galaxy Ace and the following scenario came up: an image of a pc connected to phone with exclamation mark in between.
Later I tried to recover my mobile by flashing the firmware of v2.3.6 through ODIN as well. It started well, but, in the middle of the installation it failed.
What can I do?
Please, it's urgent!
Thanks in advance folks!
happened with me a lot....but i usually flash the stock firmware with odin and my phone becomes good as new. try again to flash stock firmware via odin.
if i'm not mistaken maclaw's ics needs gb bootloader, thus need to flash stock gb rom beforehand. u cant just go straight from froyo to ics :/
btw try this.
turn off phone, remove battery, wait for around 5-10 seconds, press three button combination for download mode (vol down+home+power) and while u still holding those three buttons reinsert the battery. device should go into download mode and u should be able to reflash with stock gb rom via odin. and good luck with it.
I was in the process of rooting my phone with Odin and using Clockwork Mod Recovery Odin flashable .tar file when I accidentally unplugged it while it was in the process of starting. Now I'm stuck on a screen where it says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
In the corner of the phone it reads
ODIN MODE
PRODUCT NAME: SGH-I717
CUSTOM BINARY DOWNLOAD: YES(1 COUNTS)
CURRENT BINARY: CUSTOM
I need answers.... Would appreciate it
Download kies and while on that screen go to tools-firmware upgrade and installation that should get you back to stock
Did that, it downloaded then proceeded with the update and never went through. Let it sit for about 30 minutes, it never even hit 1%. I re did them steps tried to initialize it once more and all it does it download firmware then go away. Is it possible the phone is bricked?
If you can get into that screen its probably a soft brick, does odin recognize the device in in that weird download mode?
http://forum.xda-developers.com/showthread.php?t=1863995
Read this .....
It describes your issue I think ....g
So my friend try to upgrade his s2 i9100 with kies and failed now when he powers the device he gets the yellow triangle and firmware upgrade encountered an issue.please select recovery mode in kies and try again. I have tried flashing 4.0.4, 4.0.3 and 2.3.5 firmware with odin but no luck. I have used pit files i try talking and unticking repartition...I don't know what to do it always gets stuck at writing nand or just stuck at kernel or cache.img...i don't know what to do i have tried flashing stock syiah and cf root kernel...help?
vladtdr said:
So my friend try to upgrade his s2 i9100 with kies and failed now when he powers the device he gets the yellow triangle and firmware upgrade encountered an issue.please select recovery mode in kies and try again. I have tried flashing 4.0.4, 4.0.3 and 2.3.5 firmware with odin but no luck. I have used pit files i try talking and unticking repartition...I don't know what to do it always gets stuck at writing nand or just stuck at kernel or cache.img...i don't know what to do i have tried flashing stock syiah and cf root kernel...help?
Click to expand...
Click to collapse
Oh... that does not sound very good.
Have you already tried to fix it like described here => http://forum.xda-developers.com/showthread.php?t=1457458?
Give it a try, but if it does not work, your phone may be "hard-bricked".
Then you should try to get a warranty repair/replacement.
Good luck !
Ok, this is far out, but are you using a USB cable connected directly to your computer and not through a hub or a port on your keyboard or something?
Some other guy on this forum had the exact same errors and turns out that was his problem. Connected it directly to his computer and it worked like a charm.
S3 stuck in ODIN
OK I've tried everything and read as many threads as I could find. Here's the scenario
- stuck in ODIN mode
- try to get into Recovery mode but it just flashes and goes away and then back into ODIN mode
- KIES sees the phone and I can kick off a firmware upgrade and initialization but I want to try and keep all the data
- I've tried 4 different version of ODIN and stock ROMs from ATT, all FAIL immediately and now the device boots into ODIN mode with Flash Read Failure error
Any ideas?
I didnt understand werry vell but try this if you can enter recover connect your samsung to pc and pull out your files am not shure if you can do this with CWM recovery but you can with twrp then delete everthing (factory reset will keep your files) download offical firmware from sammobile or simmilar and flash it with odin
What was the last thing you did before you got stuck
Edit
I dont know will this make any diffrence but flas other firmware not att
Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.