Related
Mods feel free to move this thread.
I just wanted to ask and make sure before i got flashing stuff, if i backup my WolfBreak CM and then flash the kernel testing <everything>, then when i get done having a look see at that if i flash bb 54 again and wipe everything then restore all but data of the CM, will the FreeKernel still be trying to load, or will everything be working correctly?
Yes.
Even yesterday I flash new kernel on my mod/rom just to checks few things. After that I went to xrec and just restore my backup and everything was at it should. I don't even wipe anything.
Sent from my X10i using XDA App
Everything should be sweet mate after you restore your backup with xrecovery.
Alright thanks guys
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
where did you get the baseband .52 files? i can't find them anywhere..
sjondenon said:
where did you get the baseband .52 files? i can't find them anywhere..
Click to expand...
Click to collapse
You can find them all here: http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband+collection
Guys, steps verified please?
Realorasz said:
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
Click to expand...
Click to collapse
why .435? I think it should be .504 not sure though
riginal said:
why .435? I think it should be .504 not sure though
Click to expand...
Click to collapse
.435 has the dt already in it.
Realorasz said:
Can someone verify my steps please?
Backup CM by WB
Wipe everything
Flash SE 2.1 .435 with FashTool
Flash Baseband 52
Root
Boot into xrecovery at first and flash kernel package
install kernel call volume fix
Click to expand...
Click to collapse
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
DooMLoRD said:
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
Click to expand...
Click to collapse
Thanks. And just to make sure if i restore my backup of my WB CM(without data, that's TB's job) it should go back to normal kernel and stuff right?
Also, will flashing the DT update from Bin4ry cause any problems? I love me some DT.
DooMLoRD said:
do not flash SE 2.1 .435 u will not get radio (wifi/gsm/wcdma)
instead use these FWs (2.0.2.A.0.24 / 2.0.A.0.504) which can support (u will get radio) baseband 2.0.52
rest everything is fine
Click to expand...
Click to collapse
yep, that's what I meant
Q
can i flash the custom kernel on wolfbreak 2.2.1
Realorasz said:
Thanks. And just to make sure if i restore my backup of my WB CM(without data, that's TB's job) it should go back to normal kernel and stuff right?
Also, will flashing the DT update from Bin4ry cause any problems? I love me some DT.
Click to expand...
Click to collapse
DT not from the system it's from the baseband
just flash .504 n then flash bb 52
erenz1202 said:
DT not from the system it's from the baseband
just flash .504 n then flash bb 52
Click to expand...
Click to collapse
that's not correct at all....
baseband is the radio of the phone.
dual touch is from the kernel.
Don't answer questions if you don't know what you're talking about
Aaaaaand the question still remains...
_______________________________________________
From my X10a running WB CM 6.1.3 V054
fiscidtox said:
that's not correct at all....
baseband is the radio of the phone.
dual touch is from the kernel.
Don't answer questions if you don't know what you're talking about
Click to expand...
Click to collapse
but bb from rendeiro collection include the kernel
i'm flashing .504 then bb 52 from rendeiro and DT work on all my application without editing build.prob.
erenz1202 said:
but bb from rendeiro collection include the kernel
i'm flashing .504 then bb 52 from rendeiro and DT work on all my application without editing build.prob.
Click to expand...
Click to collapse
well then that is because you flashed the kernel and the baseband in one shot....
My point still stands, and what you said is very misleading. The dual touch is not included in the baseband
fiscidtox said:
well then that is because you flashed the kernel and the baseband in one shot....
My point still stands, and what you said is very misleading. The dual touch is not included in the baseband
Click to expand...
Click to collapse
This is true, baseband and kernel are two different things.
But, in the baseband collection thread, there is a ftf bundle for bb .49
that includes the DT kernel.
Thus, the confusion!
I know this, because I flashed it today, for my MIUI!
DoomLord, where are you? I still havent learned whether or not Z's kernel already has DT, or if ill need to install Bin4ry's DT addon(If so, at what point in the process).
guys i dont know what to do now it's 5:30 here now. i flash baseband 67 on my stock rom 2.1 but the result is unknown baseband i did out the sd card the factory reset but didnt work to me. when i try to repair using pc companion its's said theres no software upvailable please help what i need to do first? can i flash other firmware Generic version 2.1update1 build 2.0.2.A.0.24? my device before is SO-10B ntt docomo it came from japan. should i flash into SO-10B? i really need help!
EDIT: its ok now i flash 2.1_2.0.2.A.0.24 with DualTouch already.. but i have 1 question if need to flash to baseband 67 i need to custom rom? like cm6 with x10i firmware then flash baseband 67? or i can directly flash in stockrom 2.1 with x10i firwmware?
Just flash the older baseband back, the one which you were on.
P.S: Post should've been in the Q&A section
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
kozxmartt said:
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
Click to expand...
Click to collapse
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance. can i flashbaseband even im in cm6? without flashing firmware stock?
gAracUh said:
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance.
Click to expand...
Click to collapse
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
kozxmartt said:
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
Click to expand...
Click to collapse
oh thank you again! but i can flash custom rom in xrecovery right? last question
Are we talking about a stock rom?
In any case just go back to your previous BB (the one that is supposed to work with your stock rom).
gAracUh said:
oh thank you again! but i can flash custom rom in xrecovery right? last question
Click to expand...
Click to collapse
Yes, you have to flash custom ROMs in xrecovery.
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
agentJBM said:
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
Click to expand...
Click to collapse
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
gAracUh said:
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
Click to expand...
Click to collapse
1.Flash Stock
2.Flash Baseband
3.Flash Rom
gAracUh said:
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
Click to expand...
Click to collapse
If you know that, why are you trying to use a incompatible baseband with his ROM?
I find it ironic that people are using that same line over and over suddenly.
They come and ask for help then act like they know what the problem is.
Seriously i am weird ed out.
3 words i am starting to hate "Help, Please, Bootloop"
What version if Trips IRIS do you want to flash.
1.5.0 works well on baseband 67
There are a couple of files you need to patch afterwards or you may get keyboard and/or wifi issues - they are the network library and keyboard layout files. This patch was put up by cobrato but the links to them were in a thread that got deleted.
If you can't find them pm me - I should have them lying around somewhere.
Sent from my X10 TripNMiUI-IRIS using XDA App
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
im not sure if this will solve your problem or not. check the link below
http://forum.xda-developers.com/showthread.php?t=936733
Not possible u will be stuck on bootloop...
4llerbuntu said:
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
Click to expand...
Click to collapse
If you wanna use a lower bb then your best option if you wanna have GB is to go back to an old custom GB rom that works on the older baseband.
hi, you can do it, but be carefull, do it on your own risk!!!!!!!!
what you need is
flashtool http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
baseband http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband
i hope you know how to use flashtool, so when you have your favorite baseband its an ftf file, open it with 7.zip and delete the kernel.sin, so you will flash only the baseband.
now you are on your favorite baseband with GB kernel, but maybe you cant send sms, then you need an sms patch from here http://forum.xda-developers.com/showthread.php?t=1177744
i tested only bb67 with GB kernel and sms patch on custom rom, and it works for me
Zocker Tko said:
hi, you can do it, but be carefull, do it on your own risk!!!!!!!!
what you need is
flashtool http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
baseband http://forum.xda-developers.com/showthread.php?t=960527&highlight=baseband
i hope you know how to use flashtool, so when you have your favorite baseband its an ftf file, open it with 7.zip and delete the kernel.sin, so you will flash only the baseband.
now you are on your favorite baseband with GB kernel, but maybe you cant send sms, then you need an sms patch from here http://forum.xda-developers.com/showthread.php?t=1177744
i tested only bb67 with GB kernel and sms patch on custom rom, and it works for me
Click to expand...
Click to collapse
It won't be stable unless you switch to a custom rom that supports the chosen baseband.
solution
4llerbuntu said:
can i use a lower baseband?
i am not happy with network performance even on stock GB.
it was'nt like this on 2.1
can i downgrade my BB?
Click to expand...
Click to collapse
although this thread is different, the attachment works for you too.
flash it with Xrecovery after installing the rom you want. works for custom roms (genric roms i dont know, maybe).Make sure you only use Xrecovery below 1.0 (dun use 1.0, use 0.3 or 0.2 or 0.1)
it will change the baseband to 46 or 54 nt sure, but it does downgrade. but make sure YOUR ROM IS BASEBAND-DOWNGRADABLE or else your rom will be corrupted. you can also install a new rom AND FLASH IT RIGHT AFTER YOU FLASH THE ROM THROUGH xREC.
regards
x10I Help Needed .
I flash X10 to 2.3.3 or 2.3.4,bb 71,my phone will often reboot .
But i use 67 or other baseband will not reboot.
Please tell me why it is like that?
T.T........................
2.3.3 only works on bb .71 no other bb will work
restore with pc companion for getting stock SE rom
What I mean is that i flash 2.1 ,other bb,X10 was OK
But 2.3,bb71 will often reboot.
tracyzhen1202 said:
What I mean is that i flash 2.1 ,other bb,X10 was OK
But 2.3,bb71 will often reboot.
Click to expand...
Click to collapse
what are you flaashing??
and try to restore by SEUS or pc companion and try reflashing
I try to restore by SEUS or pc companion,but the problem is not resolved.
2.1 ,other bb,X10 was OK
did you try flashing generic 2.3.3 firmware by flashtool?
yes i try,but ......
then sorry I have no ideas...
go to 2.1
-root and install xrecovery through newest flashtool
-download wolfs 2.3.3 rom and bb .71 from his thread
-put rom in sd card
-reboot into xrecovery then wipe data cache
-install the rom
DONT REBOOT NOW
take the battery out and then open flashtool and put phone in flash mode
flash the baseband from flashtool
now you can reboot
I hope this helps
Flash global generic 2.3.3.ftf with flashtool
Sent from my X10 using XDA
Thank u , i flash many version of the 2.3.3 with flashtool,but always reboot.
i flash 2.1 everything is fine,I do not know why it is so.
tracyzhen1202 said:
Thank u , i flash many version of the 2.3.3 with flashtool,but always reboot.
i flash 2.1 everything is fine,I do not know why it is so.
Click to expand...
Click to collapse
did you try flashing the way i suggested 2 posts before?
yes,... each of these methods i have tried.
I think this is probably the baseband problems
tracyzhen1202 said:
yes,... each of these methods i have tried.
I think this is probably the baseband problems
Click to expand...
Click to collapse
here is the collection of baseband http://forum.xda-developers.com/showthread.php?t=960527
if u dont have urs
just flash ur default baseband
thats the only way
or u can have .71 baseband just flash the custom roms.....
thank u very much.
my phone is X10I,Locked bootloaders.
can i flash 2.0.72 baseband?
Nobody???
I flash 2.1,other bb,everything is fine.
but i found the battery overheating will reboot
..............
som1 have a ROM BRAZIL???
Claro or TIM?? 2.3 X10A???
couldnt find brazil firmware anywhere except here www.topsony.com/forum/local_links.php?catid=4556
but you have to register to download(sorry dont have time to do it)(also dont know if it is 2.3.3 or not)
Why do you need it?
you can also flash other 2.3.3 firmwares. They will work
THeLogiC said:
couldnt find brazil firmware anywhere except here www.topsony.com/forum/local_links.php?catid=4556
but you have to register to download(sorry dont have time to do it)(also dont know if it is 2.3.3 or not)
Why do you need it?
you can also flash other 2.3.3 firmwares. They will work
Click to expand...
Click to collapse
my x10 jhave bug...
dont send acentuation in SMS
Thiagolacosta said:
my x10 jhave bug...
dont send acentuation in SMS
Click to expand...
Click to collapse
Try to flash world generic 2.3.3