Wrong relocked and can not boot. Only stay in the Fast boot. When I access the bootloader it says
Loading PH85DIAG.zip.......
no image!
Loading PH85DIAG.nbh......
No image or wrong image!
pls someone let know what I should to do
Did u put the zip on the external or internal sd card?
Sent from my NRGized Amaze...
via xda premium
U need to name it PH85IMG.zip and put it on the external sd card
Sent from my NRGized Amaze...
via xda premium
Where I can get the zip file
jettco said:
Where I can get the zip file
Click to expand...
Click to collapse
What is it that u are u trying to flash?
Sent from my NRGized Amaze...
via xda premium
I have try the ph85img.zip but it said not right it need ph85diag.zip. where can have it?
:what::what:
I mean huh? Is this real life?
Sent from my HTC_Amaze_4G using xda premium
jettco said:
I have try the ph85img.zip but it said not right it need ph85diag.zip. where can have it?
Click to expand...
Click to collapse
What is it that you are trying to do to your phone, what are you trying to flash? Like a recovery or what? You haven't really explained your situation at all so i cant tell you what to do if i dont know what you are trying to do
Sent from my NRGized Amaze...
via xda premium
When going to relock, unfortunately USB cable with the phone was run out under the batch command is running then it can boot any more
jettco said:
When going to relock, unfortunately USB cable with the phone was run out under the batch command is running then it can boot any more
Click to expand...
Click to collapse
So you are trying to relock your bootloader? Or you already did relock your bootloader and now you are stuck?
Sent from my NRGized Amaze...
via xda premium
Screw up on the way to relock the batch in command promt was runing but the cable is out. The phone is relocked and only stay on hboot
jettco said:
Screw up on the way to relock the batch in command promt was runing but the cable is out. The phone is relocked and only stay on hboot
Click to expand...
Click to collapse
Ok, so the phone is now relocked, it says relocked when you go into bootloader? If it does, then you need to get the ruu for your carrier, name that PH85IMG.zip and put it on you external sd and it should be good. What carrier do you have ill post u the link
Sent from my NRGized Amaze...
via xda premium
I downlowd and try the PH85img.zip, but it said it need the PH85DIAG.zip. it PH85IMG.ZIP WRONG FILE NO IMAGE thanks
try using this, it helped me to relock when i got a soft brick and then unlock it again
http://forum.xda-developers.com/showthread.php?t=1493905
jettco said:
I downlowd and try the PH85img.zip, but it said it need the PH85DIAG.zip. it PH85IMG.ZIP WRONG FILE NO IMAGE thanks
Click to expand...
Click to collapse
PH85diag is a .nbu file found in an RUU.
Sent from my NRGized Amaze...
via xda premium
I have no idea what file it is, but phone it need that file PH85DIAG.ZIP to boot. Anyway thank you very much guys. If someone know how to do please mail me [email protected] Thanks again
jettco said:
I have no idea what file it is, but phone it need that file PH85DIAG.ZIP to boot. Anyway thank you very much guys. If someone know how to do please mail me [email protected] Thanks again
Click to expand...
Click to collapse
AJ said it perfectly. Download your carrier's RUU and put it on the root of your SD card. Make sure you rename it PH85IMG.zip. Then boot into hboot and let it do the rest.
Sent from my HTC_Amaze_4G using xda premium
jettco said:
I have no idea what file it is, but phone it need that file PH85DIAG.ZIP to boot. Anyway thank you very much guys. If someone know how to do please mail me [email protected] Thanks again
Click to expand...
Click to collapse
I kno u say its not wat u need, but do u mind sharing which ph85img you tried
Sent from my NRGized Amaze...
via xda premium
I got the PH85IMG from
http://code.google.com/p/binary100100/downloads/detail?name=PH85IMG.zip&can=2&q=
from:binary100100
jettco said:
I got the PH85IMG from
http://code.google.com/p/binary100100/downloads/detail?name=PH85IMG.zip&can=2&q=
from:binary100100
Click to expand...
Click to collapse
That is to flash a recovery, not what you need if you relocked your phone. What service provider do you have?
Sent from my NRGized Amaze...
via xda premium
Related
Can anybody tell me where I can find the 1.40 hboot ....cnat seem to find it anywhere. Thanks in advance
Sent from my MB855 using xda premium
todah09 said:
Can anybody tell me where I can find the 1.40 hboot ....cnat seem to find it anywhere. Thanks in advance
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Came with the 1.13 system software release.
Personally, I always prefer to pull files from their original source rather than some random person.
RUU .exe and .zip files are hosted here: http://www.goo-inside.me/shooter/ruu . You can extract the boot image from inside of the 1.13* PG86IMG.zip inside of the firmware.zip file.
Hope that helps!
joeykrim said:
Came with the 1.13 system software release.
Personally, I always prefer to pull files from their original source rather than some random person.
RUU .exe and .zip files are hosted here: http://www.goo-inside.me/shooter/ruu . You can extract the boot image from inside of the 1.13* PG86IMG.zip inside of the firmware.zip file.
Hope that helps!
Click to expand...
Click to collapse
Is theirva way to do this without doing it thru fastboot? Can I just put this on the SD card and update or do I have to use a computer and cmd lines, I wont have access to a CPU for a couple days and I need to unroot for repairq?
Sent from my MB855 using xda premium
EDIT: took a long time between the start of my post to the time I finished.
animal7296 said:
EDIT: took a long time between the start of my post to the time I finished.
Click to expand...
Click to collapse
Its all good. ...thanks anyway
EDIT: can you answer this for me
Sent from my MB855 using xda premium
todah09 said:
Is theirva way to do this without doing it thru fastboot? Can I just put this on the SD card and update or do I have to use a computer and cmd lines, I wont have access to a CPU for a couple days and I need to unroot for repairq?
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Look here
I know it says for htc unlocked phones, but the process of unrooting is the same. Just use the 1.13.651.7 RUU, after it flashes go to fastboot and type:
Code:
fastboot oem lock
and you're done.
Twolazyg said:
Look here
I know it says for htc unlocked phones, but the process of unrooting is the same. Just use the 1.13.651.7 RUU, after it flashes go to fastboot and type:
Code:
fastboot oem lock
and you're done.
Click to expand...
Click to collapse
Thanks. You Da man
Sent from my MB855 using xda premium
Sorry in advance if this had been covered before but there are so many different threads everywhere i don't know where to start. As of right now i'm running 1.50 s-on and have been attempting to use the HTC method to unlock the bootloader. I have no problems or errors at all til i get to i think it's step 13 or 14
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.006s]
finished. total time: 0.159s
it appears that everything goes through but then nothing happens? my phone just stays in the same hboot screen. What am i doing wrong? thanks in advance and sorry again if this has been covered but i'm somewhat noob to rooting and am still trying to figure all of this out.....
If your cdma you need to run the latest ruu 2.17 ruu exe . Once done then apply the unlock code your set.
Sent from my PG86100 using xda premium
You can download the ruu in the sticky on how to get back to stock. I had this same problem and that's how I got it fixed.
Sent from my PG86100 using Tapatalk
reaper24 said:
If your cdma you need to run the latest ruu 2.17 ruu exe . Once done then apply the unlock code your set.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
ok how do i run the ruu? it's a .exe file so i just plug in my phone and run the .exe?
EDIT: i did the latest OTA from sprint a couple days ago (removed CIQ) and i'm running software number 2.17.651.5...is that what you guys are referring to?
casper916 said:
ok how do i run the ruu? it's a .exe file so i just plug in my phone and run the .exe?
EDIT: i did the latest OTA from sprint a couple days ago (removed CIQ) and i'm running software number 2.17.651.5...is that what you guys are referring to?
Click to expand...
Click to collapse
Yes you need to run that ruu from fastboot in hboot . It is the same Ota you took but will fix your problem.
Sent from my PG86100 using xda premium
reaper24 said:
Yes you need to run that ruu from fastboot in hboot . It is the same Ota you took but will fix your problem.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
ok one last question? I'm at the shipped roms.com site and there are is a .zip and a .exe of the RUU. Which one should i DL? if it's the zip do i extract it to the rootevonew folder on my C: drive? And just so i'm clear i go into fastboot and while in fastboot i run the .exe on my comp? or do i put it in the root of my sd card? Sorry again for all the questions.....
Put your phone on fasboot usb .
Run RUU.EXE
And your set. It will take about 10 min to complete.
Realize that if you remove your USB while its updating your phone might end up bricked so be careful to not get it unplugged.
Sent from my PG86100 using Tapatalk
iTzLOLtrain said:
Put your phone on fasboot usb .
Run RUU.EXE
And your set. It will take about 10 min to complete.
Realize that if you remove your USB while its updating your phone might end up bricked so be careful to not get it unplugged.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
ok, and i need to uncheck the fastboot option in my phone first correct. Just like if i were to be doing the HTC unlock?
casper916 said:
ok, and i need to uncheck the fastboot option in my phone first correct. Just like if i were to be doing the HTC unlock?
Click to expand...
Click to collapse
Not really. you can just remove the battery and place it back in.
casper916 said:
ok, and i need to uncheck the fastboot option in my phone first correct. Just like if i were to be doing the HTC unlock?
Click to expand...
Click to collapse
Ya you can do that to make it easier to get into hboot .
Sent from my PG86100 using xda premium
reaper24 said:
Ya you can do that to make it easier to get into hboot .
Sent from my PG86100 using xda premium[/QUOT
thanks again and i'll let you know how it goes
Click to expand...
Click to collapse
iTzLOLtrain said:
Put your phone on fasboot usb .
Run RUU.EXE
And your set. It will take about 10 min to complete.
Realize that if you remove your USB while its updating your phone might end up bricked so be careful to not get it unplugged.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Right on thanks guys i finally got around to doing all this and it worked. One last question....Any advice on a particular ROM to flash? I was looking at the Nocturnal Adrenaline E3D 1.0.2 ODEX?? what do you guys think? Thanks again for all the help...
I'm currently running MeanRom 3.92. It's really good. Lots of features & easily over clockable on included ziggy kernel or Anthrax Rls8 Final. Also includes other options that get loaded onto sdcard for flashing.
I flashed leedroid Tweaks, & anthrax, clocked to 1.728Ghz. Stable, fast, quadrant average about 4k.
All up to your preference really, but some consider it a good idea to stick with 2.17 based roms if that's the radio base you have.
Sent from my PG86100 using Tapatalk
Ok cool,and i can just flash that using the fastboot method right? What about the kernel? Do I need to flash that seperately or does it all go in with the rom?
Sent from my PG86100 using XDA
casper916 said:
Ok cool,and i can just flash that using the fastboot method right? What about the kernel? Do I need to flash that seperately or does it all go in with the rom?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Yes, once you enter recovery VIA fastboot command prompt everything will flash fine. See the Hboot 1.50 guide flashing notes in my signature for details or just get 4ext recovery.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Yes, once you enter recovery VIA fastboot command prompt everything will flash fine. See the Hboot 1.50 guide flashing notes in my signature for details or just get 4ext recovery.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
+1
we are android, android is us
Did you connect the EVO to your USB
Sent From my EVO 3D x515m s off using xda premium
casper916 said:
Ok cool,and i can just flash that using the fastboot method right? What about the kernel? Do I need to flash that seperately or does it all go in with the rom?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
run 4ext recovery, u dont need a usb cord...and the best rom out right now is ZR3D
http://forum.xda-developers.com/showthread.php?t=1561999
evomike77 said:
run 4ext recovery, u dont need a usb cord...and the best rom out right now is ZR3D
http://forum.xda-developers.com/showthread.php?t=1561999
Click to expand...
Click to collapse
Ok i got 4ext recovery and am trying to figure it all out, I read the thread on 4ext but I'm totally confused. I download the rom, put it on the root of my sd
Card, then open 4ext and when I install through 4ext do I still do the full wipe/dalvik cache wipe, etc. Etc? Or can I just install Zip from sd Card?
Sent from my PG86100 using XDA
casper916 said:
Ok i got 4ext recovery and am trying to figure it all out, I read the thread on 4ext but I'm totally confused. I download the rom, put it on the root of my sd
Card, then open 4ext and when I install through 4ext do I still do the full wipe/dalvik cache wipe, etc. Etc? Or can I just install Zip from sd Card?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
it works the same as any other recovery, but when you choose the zip to install, a menu will pop up asking you what to do prior to the flash, that is where you do all your wiping...enjoy
Someone Please help me! I am rooted with s on and I tried to install a new font with rom toolbox and now my phone wont go past the 4g screen on the boot... Ive tried a factory reset and still nothing... I dont have a nandroid backup I can go to unfortunately... Help is greatly appreciated!
unccody said:
Someone Please help me! I am rooted with s on and I tried to install a new font with rom toolbox and now my phone wont go past the 4g screen on the boot... Ive tried a factory reset and still nothing... I dont have a nandroid backup I can go to unfortunately... Help is greatly appreciated!
Click to expand...
Click to collapse
Your gonna have to relock if your currently unlocked and flash an ruu to get your phone booting again. Sorry but that is why you should always have a backup made
Sent from my ADR6425LVW using xda app-developers app
Go into recovery and reflash your ROM
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
Your gonna have to relock if your currently unlocked and flash an ruu to get your phone booting again. Sorry but that is why you should always have a backup made
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
How can I relock it if I cant get it booted?
Squirrel1620 said:
Your gonna have to relock if your currently unlocked and flash an ruu to get your phone booting again. Sorry but that is why you should always have a backup made
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Ive locked it, but now how can I flash the RUU? I have one downloaded but I thought I need to put it on the sd card and I cant do that if I cant get it booted
unccody said:
Ive locked it, but now how can I flash the RUU? I have one downloaded but I thought I need to put it on the sd card and I cant do that if I cant get it booted
Click to expand...
Click to collapse
You have to use a card reader in a computer. If these are not available to you, you might try the local library.
You should be able to go into recovery. Just reflash like Mike said and you should be good to go.
Like others have said just go into recovery and re flash your rom. There is Zero need to re lock and run an ruu, just a waste of time
Sent from my ADR6425LVW using Tapatalk 2
Very strange though as I change my font all the time and that has never happened to me
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
Very strange though as I change my font all the time and that has never happened to me
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
What's even more interesting.
I had to pull font installation menu's from my Aroma installer cause it would end in an unbootable state. Going to have to mess around with that more.
Sent from my ADR6425LVW using xda app-developers app
zetsumeikuro said:
You should be able to go into recovery. Just reflash like Mike said and you should be good to go.
Click to expand...
Click to collapse
Unfortunately I am still running stock recovery because of the OTA and I cant flash the RUU... I can put it on the sd card with a card reader though
chaos254 said:
Like others have said just go into recovery and re flash your rom. There is Zero need to re lock and run an ruu, just a waste of time
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I need to though because I am still on stock recovery from the OTA... I cant reflash. Thankfully I have a card reader and Ill be able to make this work.
nrfitchett4 said:
You have to use a card reader in a computer. If these are not available to you, you might try the local library.
Click to expand...
Click to collapse
Ive downloaded the ics ruu from androidpolice and I renamed it PH98IMG.zip and put it onto the root of the sd card but when I boot to HBOOT nothing happens... What have I done wrong? Do you possibly have a link to the official ota download? This is where I got mine
http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
unccody said:
Ive downloaded the ics ruu from androidpolice and I renamed it PH98IMG.zip and put it onto the root of the sd card but when I boot to HBOOT nothing happens... What have I done wrong? Do you possibly have a link to the official ota download? This is where I got mine
http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Click to expand...
Click to collapse
Make sure the file isn't PH98IMG.ZIP.ZIP
Sometimes windows hides the extension so just rename to PH98IMG
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
Make sure the file isn't PH98IMG.ZIP.ZIP
Sometimes windows hides the extension so just rename to PH98IMG
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
That's exactly what it was! Thank you so much. You all have saved my life
I am s-on and trying to flash Tron. I am currently on Rage 1.8.
I don't mind flashing the boot.img through hboot at all. However, I can not get the image to flash to the phone. I had this problem before when flashing Rage. The phone just decided to take the boot image so I don't know what I did differently to get it to work.
I used Scott's CleanFlash and that wouldn't work. I try command prompt that wouldn't work.
Any ideas what is keeping the boot image from flashing? Thank you in advance.
Sent from my Rezound using xda app-developers app
I just uninstalled and reinstalled drivers and that didn't help. Everything I try ends up having the same error.
FAILED (remote: NOT ALLOWED)
I don't quite understand that since I check connection with "fastboot devices" and it always brings up my phone's serial number.
Sent from my Rezound using xda app-developers app
You should be able to flash a boot.img by booting your phone to bootloader.
Then on your pc, navigate so that the command prompt is where you have your adb stuff set up. Have the boot.img file in there too, and then type the following in the command window:
fastboot flash boot boot.img
Should flash.
feralicious said:
You should be able to flash a boot.img by booting your phone to bootloader.
Then on your pc, navigate so that the command prompt is where you have your adb stuff set up. Have the boot.img file in there too, and then type the following in the command window:
fastboot flash boot boot.img
Should flash.
Click to expand...
Click to collapse
That is exactly what I do.
Sent from my Rezound using xda app-developers app
sanders539 said:
That is exactly what I do.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
It sounds like you're on hboot 2.27 .... If that is the case you can't remotely push anymore for the boot partition. You will have to find a flashable ph98img.zip and do it that way.
Sent from my Rezound using xda app-developers app
cslingerland said:
It sounds like you're on hboot 2.27 .... If that is the case you can't remotely push anymore for the boot partition. You will have to find a flashable ph98img.zip and do it that way.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
I am on 2.21. Do you think putting it in a PH98img.zip would work?
Sent from my Rezound using xda app-developers app
sanders539 said:
I am on 2.21. Do you think putting it in a PH98img.zip would work?
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Yeah
Sent from my Rezound using xda app-developers app
cslingerland said:
Yeah
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
How would I go about doing that? I saw a thread where someone took one they already had and just replaced the boot.img with the one needed. However, I don't have a ph98img.zip on hand (at least I can't find one). Can I just take the boot.img and zip it with winrar and name it ph98img.zip, put it on my SD card and it work?
Sent from my Rezound using xda app-developers app
sanders539 said:
How would I go about doing that? I saw a thread where someone took one they already had and just replaced the boot.img with the one needed. However, I don't have a ph98img.zip on hand (at least I can't find one). Can I just take the boot.img and zip it with winrar and name it ph98img.zip, put it on my SD card and it work?
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Look around on the forums for one. What you said won't work
Sent from my Rezound using xda app-developers app
cslingerland said:
It sounds like you're on hboot 2.27 .... If that is the case you can't remotely push anymore for the boot partition. You will have to find a flashable ph98img.zip and do it that way.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
I used to push the boot.img with Hboot 2.27 before I S-Off'd.
Sent from my ADR6425LVW using xda premium
Are you on the global firmware releases? Somewhere there is a thread by con247 that tells you how to make your own ph98img.zip But ideally you want to get fastboot flash working again
Sent from my Rezound using Tapatalk 2
I am not on the global release. Thanks, I will search for that thread. Is there a difference in the ph98img.zip for sense and aosp? I imagine there would be. I wish knew what was causing fastboot to not work right.
Sent from my Rezound using xda app-developers app
sanders539 said:
I am not on the global release. Thanks, I will search for that thread. Is there a difference in the ph98img.zip for sense and aosp? I imagine there would be. I wish knew what was causing fastboot to not work right.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Sorry for jumping in late but do u have USB debugging enabled?
Sent from my Rezound using xda app-developers app
snyderbrad01 said:
Sorry for jumping in late but do u have USB debugging enabled?
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Yeah, I double checked that. I few times actually. I am gonna try to change USB ports to see that works. It fixed this issue for someone else.
This may sound dumb, what is the difference in the firmware and radios? I mean, I am sure there is a big difference, but what, other than the radios, are included in the firmware? I have the .310r and .308r radios.
Sent from my Rezound using xda app-developers app
So changing USB ports didn't work. I only had about fifteen minutes this morning to work on it.
Sent from my Rezound using xda app-developers app
I am s-on. I download the ROM. Extract the boot.IMG to my desktop. Reboot my phone into boot loader. Connect USB. Open hansoons tool kit. Click flash kernel. Select the boot.IMG on my desktop. Flashes that in a few seconds....disconnect. Reboot. Enjoy. I've done this with MHF and Tron
Sent from my Rezound using xda app-developers app
Failed remote not allowed is usually because you have a locked hboot, sounds like you updated firmware and hboot but didn't unlock the new hboot.
You might as well drop the global RUU on your external sdcard and boot to hboot and flash it, then unlock and flash recovery.
Yes it makes a huge difference. In an s on device you update the RUU which is the rom, kernel, bootloader and recovery and radio and modem firmware ans drivers. It also changes some things like mount points.
Sent from my ADR6425LVW using xda premium
Is this the global RUU?
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Just wanting to double check before going through all of it. Also, if my hboot IS locked, I should be able to just run it and not have to "fastboot OEM lock" will I?
Also, I saw where it said you will lose data. Is that internal or both?
Sent from my Rezound using xda app-developers app
That's the correct link.
You're right if your hboot is locked you shouldn't have to fastboot OEM lock. You should just be able to place it on your ext_sdcard and then boot the phone to hboot and it will ask you to run update.
Only the internal storage should be wiped, ext sdcard shouldn't but I always recommend copying both internal and external storage to a folder on the computer just in case. Also make sure your contacts are synced, and anything else backed up from the system itself.
Sent from my ADR6425LVW using xda premium
CharliesTheMan said:
That's the correct link.
You're right if your hboot is locked you shouldn't have to fastboot OEM lock. You should just be able to place it on your ext_sdcard and then boot the phone to hboot and it will ask you to run update.
Only the internal storage should be wiped, ext sdcard shouldn't but I always recommend copying both internal and external storage to a folder on the computer just in case. Also make sure your contacts are synced, and anything else backed up from the system itself.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I imagine doing a nandroid backup internal and external on a spare sdcard would work. Hopefully I will be able to get it all working tonight.
After I run the RUU, I will have to use my unlock token-> flash amon ra-> then flash ROM. Correct? Sorry for all the questions. I don't have internet at my house so I want to make sure I am prepared.
So if I update twrp2.5 to 2.6 using bootloader method after I do install it isn't going to let be boot phone only to bootloader correct? Because of the img file I will put on SD card. So before I do this I just want to make sure all I do after update is complete pull SD card an then boot to rom re install SD card an delete?? Or is there a easier way
S-off dirty 2.09
Latest everything besides touch panel
Tigerstown said:
So if I update twrp2.5 to 2.6 using bootloader method after I do install it isn't going to let be boot phone only to bootloader correct? Because of the img file I will put on SD card. So before I do this I just want to make sure all I do after update is complete pull SD card an then boot to rom re install SD card an delete?? Or is there a easier way
S-off dirty 2.09
Latest everything besides touch panel
Click to expand...
Click to collapse
You can reboot your phone once you're done and delete the file with a file manager. The only issue you'll have is if you reboot the bootloader.
Sent from my EVO using xda premium
FinZ28;43731 can reboot your phone once you're done and delete the file with a file manager. The only issue you'll have is if you reboot the bootloader.
Sent from my EVO using xda premium[/QUOTE said:
So after update is completed just reboot phone bootloader then delete file before I go back to boot loader. Really I delete right away in case I have to recover to boot loader to access recovery correct. Thanks for quick response too'
Click to expand...
Click to collapse
Tigerstown said:
So after update is completed just reboot phone bootloader then delete file before I go back to boot loader. Really I delete right away in case I have to recover to boot loader to access recovery correct. Thanks for quick response too'
Click to expand...
Click to collapse
Yes, delete it once you reboot your phone:thumbup:
Sent from my EVO using xda premium
I can't find the 2.6.0 bootlooder IMG file no where to download. Is there somewhere someone could point me too
Sent from my GT-P3110 using xda premium
Tigerstown said:
I can't find the 2.6.0 bootlooder IMG file no where to download. Is there somewhere someone could point me too
Sent from my GT-P3110 using xda premium
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=2370642
Sent from my EVO using xda premium
Why not use GooManager? It will correctly install the Recovery Image for you. I can see that you want to push it via command but GooManager is excellent. Just another option, good luck. :good:
dteze88 said:
Why not use GooManager? It will correctly install the Recovery Image for you. I can see that you want to push it via command but GooManager is excellent. Just another option, good luck. :good:
Click to expand...
Click to collapse
goo.im has been flaky recently I have not used goomanager in over a year
I always fastboot flash the new version of twrp
dteze88 said:
Why not use GooManager? It will correctly install the Recovery Image for you. I can see that you want to push it via command but GooManager is excellent. Just another option, good luck. :good:
Click to expand...
Click to collapse
They only way I ever done it is fastboot flash. I have heard bad things bout GooManager. My wife is s-on still she is scared to let me do it to her phone lol. I have never updated hers can I do it the same way I do my S-off dirty phone?
Sent from my EVO using xda premium
Tigerstown said:
They only way I ever done it is fastboot flash. I have heard bad things bout GooManager. My wife is s-on still she is scared to let me do it to her phone lol. I have never updated hers can I do it the same way I do my S-off dirty phone?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
If her phone is unlocked you can fastboot flash twrp
Also flashing a PJ75IMG.zip is different then fastboot flashing
Sent from my Eliptic Nexus 7
bigdaddy619 said:
If her phone is unlocked you can fastboot flash twrp
Also flashing a PJ75IMG.zip is different then fastboot flashing
Sent from my Eliptic Nexus 7
Click to expand...
Click to collapse
Ok I meant to put flashing g PJ75IMG IS the way I done it before. I was reading your reply an just typed that in my response on mistake lol. her phone is unlocked via htcdev. So I have to fastboot flash twrp. Now I do some research on fastboot flashing for her. I really like this site
Sent from my EVO using xda premium