Hi my friends how can i know if i have See installed?
Thanks
Sent from my ARCHOS 80G9 using Tapatalk
Just boot to recovery. If you see Developer Edition menu then you have SDE
tapatalked from Desire
Yes i have
Many thanks
Sent from my ARCHOS 80G9 using Tapatalk
Need help, SDE menu on Archos 101 G9 turbo
I have a Archos 101 G9 turbo (with ice cream installed)
I want to root it and therefore I need to install the SDE menu.
I have downloaded the firmware from the Archos website
(SDE firmware for ARCHOS Generation 8 devices: (ARCHOS 101, 70, 43, 32, 28 internet tablet)
But this is not working on my tablet. I am getting an error (1)
Is there another firmware for G9 turbo tablets? And where can I download it?
Or is it something else I do wrong?
I push the power button and vol. down at the same time.
Then I see the recovery menu.
Go to firmware update.
Connect my tablet to my (windows) computer and see an window popup.
Select drive (I think an empty RAM-Drive) and copy the firmware to this drive.
then (on tablet) select “OK” to disconnect (so the firmware can install itself)
But then I get the Error (failed 1)
name of the file that I install is: firmware_archos_android_gen8.aos
Please help me.
Related
can any one help me please,
when i connect to PC my archos101 ask me Format disk,
olso i cannot re instal firmware , i formatted several times but my tablet style not working and always sayes format disk
please help me thank you
These might help:
http://forum.archosfans.com/viewtopic.php?f=63&t=42437&start=0
http://www.archos.com/support/support_tech/firmware.html?country=us&lang=en&g=8
Did you totally format the device??? To where it says "Warning, you have to manually install firmware, blah blah blah?"
If not, go ahead and do that and then download the new firmware from the Archos website.
Then connect your Archos tablet to the computer and copy the firmware to it. Safely remove the device from the computer and press OK to install the firmware. It will need to be connected to your power source to finish the install.
Thank you guys
Thank you guys,i solved my problem
you did the ext3 format and realized you had to go back to fat32 for windows, huh?
problem with my archos 80 g9
z06mike said:
Did you totally format the device??? To where it says "Warning, you have to manually install firmware, blah blah blah?"
If not, go ahead and do that and then download the new firmware from the Archos website.
Then connect your Archos tablet to the computer and copy the firmware to it. Safely remove the device from the computer and press OK to install the firmware. It will need to be connected to your power source to finish the install.
Click to expand...
Click to collapse
i totaly formatted my archos and i download the firmawre from archos and i conected the tablet, i put the file in the disk that apear when you conect the tablet to update and allways give an error, what else can i do because i dont know if there is another way to solve this problem.
kakkuk said:
Thank you guys,i solved my problem
Click to expand...
Click to collapse
how did you solve it?
Hi, I am looking for usb driver for viewpad 7e for using adb. Can anybody provide and link or pointers from where can I get the same.
Thanks,
Remy
I got a wellcom a800, same model of Viewpad 7.
when I plug the pad within my PC(WIN 7), I'll got a new mobile device in my computer and it looks like a USB storage device. it contained a setup file to install the drive of your pad.
Wish this can help you~
I have a Archos 101 G9 turbo (with ice cream installed)
I want to root it and therefore I need to install the SDE menu.
I have downloaded the firmware from the Archos website
(SDE firmware for ARCHOS Generation 8 devices: (ARCHOS 101, 70, 43, 32, 28 internet tablet)
But this is not working on my tablet. I am getting an error (1)
Is there another firmware for G9 turbo tablets? And where can I download it?
Or is it something else I do wrong?
I push the power button and vol. down at the same time.
Then I see the recovery menu.
Go to firmware update.
Connect my tablet to my (windows) computer and see an window popup.
Select drive (I think an empty RAM-Drive) and copy the firmware to this drive.
then (on tablet) select “OK” to disconnect (so the firmware can install itself)
But then I get the Error (failed 1)
name of the file that I install is: firmware_archos_android_gen8.aos
Please help me.
1. You can't use Gen7/8 firmware on Gen9
2. Search forums- there are tutorials how to use custom firmware
tapatalked from Desire
As you can see I already done this. Gen8 and seen a view tutorials.
I have downloaded the firmware from the Archos website
(SDE firmware for ARCHOS Generation 8 devices: (ARCHOS 101, 70, 43, 32, 28 internet tablet)
but still got an error.
You can not install Gen8 firmware on Gen9 device, it is not compatible (recovery will prevent flashing)
tapatalked from Desire
Hello,
I have a Archos 101G9 Turbo (1,5 Mhz) with a 250 GB HDD. Since yesterday, I have no access to this hard drive under Windows7. Instead of the Tablet icon a phone icon in the Explorer is displayed now me and the drive is empty. Both the record and the content is available under android. About ADB I can access the HDD.
I've tried the following:
Newly installed Windows Media Player and Windows media center
Storage carried out wipe of the SDE
Newly installed update Android 4.0.6 ([email protected]_04.06.2012)
All measures have brought no positive result. I have installed the custom ROM by surdu_petru. Unfortunately I can not associate the problem. I don't know whether the problem lies with the archos tablet or Windows7 Ultimate with SP1. Do you have a solution for this problem? Thank you for your help in advance.
-Amalkotey-
Hello,
so, since no one had a solution up to now, have I installed the ungerootet on my ARCHOS firmware 4.0.7 (4.0.3) and newly established the tablet to the root. Now I have the internal memory available under Windows7 Ultimate again.
-Amalkotey-
Amalkotey said:
Hello,
so, since no one had a solution up to now, have I installed the ungerootet on my ARCHOS firmware 4.0.7 (4.0.3) and newly established the tablet to the root. Now I have the internal memory available under Windows7 Ultimate again.
-Amalkotey-
Click to expand...
Click to collapse
Hi !
I answered you here => http://forum.xda-developers.com/showthread.php?t=1675130&page=39 ( #385) !
I think nobody had this problem !
Long story short - I was about to install the rcommended CM10.2 over rooted stock 4.0.*+SDE, but failed.
1) I followed the instruction with SDE. There is no menu item "export partion". None at all.
Tried to uninstall SDE, install clean stock 4.0.4beta (highest official ROM for me - want to be able to downgrade to 3.*), installed SDE - no "export partition". All other like remove kernel, flash kernel are here (so SDE is Ok), but not partition one. Weird.
2) Tried to install ADB (I do use it with my huawei phone and know what it is) - no luck.
Under 4.0.4beta if I just connect tablet, I've got an unknown device with vid_0e79&pid_1528 (looks like MTP) - my windows 7 x64 says it's unknown device (!!). If I turn "USB debugging" on, then windows suddenly connect MTP drive, but no signs of ADB interface in the device manager.
Looked with USBDeview-64bit - there is no USB devices attached with pid 1509 either.
I cannot honestly say what I think about Archos without violating forum rules... But may be anybody can help me?
P.S. My child pulled micro usb connector with force while the device was charging.
It is working, although with some cables and not others - charging, file transfer in "usb debugging" mode.
Can it be so that something is not right with the usb chip inside the tablet?
Tried connecting to another PC (win7/x86) - adb works Ok. So the second problem is solved. I think it is caused by the combination of HP notebook "magic", 64-bit OS and USB2 + USB3 (yes, two) controllers...
But the question with SDE and "export partition remains". What is the matter with it?
May be "export partition" can be found on unofficial SDE only?
Tried both officical and unofficial (without a goat). Just the same.
So the only logical answer is that my tablet is from a batch with slightly different USB controller and SDE doesn't know it.
Archos is known for terrible changes in hardware for one model (think about haptic feedback genocide, elusive problems with wifi and gps on stock ROM for some percentage of users, and so on). So it makes sense.
Solved!
Ok, if anybody is interested. This symptom appears if one installs SDE on top of 3.x.x firmware.
After I have uninstalled SDE, installed stock 4.0.7 and then official SDE - bingo, "export partition" appeared.
So, installing SDE on top of 3.x.x is a bad idea.
Closed!