i was trying out some new fonts on my rooted razr 2.3.6..and suddenly it got hanged...whn i turn it back on it stays for ever on the dual core start up screen and dosent move forward..i also hav the cwm installed recently.....please help me on what to do...
http://www.redmondpie.com/how-to-in...mod-recovery-on-motorola-droid-razr-tutorial/
If you followed the steps correctly, ClockworkMod Recovery will be flashed to your Motorola DROID RAZR and you can use it to flash custom ROMs. Now, every time you reboot, you will boot into recovery. You must select reboot option to boot normally. If you enter a bootloop, press and hold Volum Down + Power buttons for about five seconds.
http://forum.xda-developers.com/showthread.php?t=1385283
Once in cwm wipe that cache and dalvik and see it that helps. Umm if not maybe do a factory wipe in cwm.
blueis300 said:
http://www.redmondpie.com/how-to-in...mod-recovery-on-motorola-droid-razr-tutorial/
If you followed the steps correctly, ClockworkMod Recovery will be flashed to your Motorola DROID RAZR and you can use it to flash custom ROMs. Now, every time you reboot, you will boot into recovery. You must select reboot option to boot normally. If you enter a bootloop, press and hold Volum Down + Power buttons for about five seconds.
http://forum.xda-developers.com/showthread.php?t=1385283
Once in cwm wipe that cache and dalvik and see it that helps. Umm if not maybe do a factory wipe in cwm.
Click to expand...
Click to collapse
i tried it still it dosent go past tht moto logo...it jus stops there...dont know what to do?? ..
Remove your SD card and start up
Ask us any Android Related Question @FeraLabsDevs on Twitter or @HowToMen
MattyOnXperiaX10 said:
Remove your SD card and start up
Ask us any Android Related Question @FeraLabsDevs on Twitter or @HowToMen
Click to expand...
Click to collapse
ya tried it not working i guess its bricked...cause its stuck on the moto logo...any help on how to unbrick it????
ezra deepak said:
ya tried it not working i guess its bricked...cause its stuck on the moto logo...any help on how to unbrick it????
Click to expand...
Click to collapse
are you able to switch your device of??. Mine done the same thing but when I removed the SD card. Everything was fine
Ask us any Android Related Question @FeraLabsDevs on Twitter
Maybe use RSD to wipe and go back to factory. Do your phone get recognized by the computer when plugged in with the usb cable? If so just flash back.
blueis300 said:
Maybe use RSD to wipe and go back to factory. Do your phone get recognized by the computer when plugged in with the usb cable? If so just flash back.
Click to expand...
Click to collapse
ya it gets detected...so do i need to download a new rom???
Sorry I cant help but if factory reset doesn't work flash Rom back to stock adn go from there whether factor another.
Related
Ok here's what happened...
I had Viper 1.3 running ok.... so I decide to give chainfire3d a try.. and install the nvidia drivers 1st...
It didn't make splinter cell work so I decided I'd uinstall it... after I put the original drivers back....
I installed the qualcom driver thinking that was it... Then I uinstalled chainfire3d.
Now when I boot my phone its totally black.
I think I can fix this if someone guides me through the recovery or guides me through wiping & re-installing viper.
Method 2 would be alot quicker, but worst case scenario,
I still have a nand backup but its on my computer.. So I'd need to boot into recovery.
And then access the sd card.. & then navigate to load it.
Great news I'm access the sd card right now and puttin the nand image back.
The only thing now is when I boot into recovery if I even make it that far, all I see is a black screen. No flash, the keys don't light up, & the power led blinks red once.
....
30 minutes later... I can boot into recovery but I can't see. Using a youtube video I mounted the sd card & have the viper rom ready to restore after I wipe it.
But I need directions on which keys to hit & the number of times.
I have just clicked wipe & something... the 3rd selection then I hit enter... Plz help
Try putting the PC86IMG.zip for TWRP back on the root of your sdcard and reflash that in the bootloader. If that all goes well, you should have a working recovery. Let me know how it goes, I'm going to bed soon so if I don't answer, I will check this thread in the morning. Best of luck!!
Can you give me the next instructions on which buttons to hit..
How many times do I hit volume down to accept yes I want to wipe it?
Or if I need to restart and choose another option.... because I already selected wipe & hit power.
Krairo said:
Can you give me the next instructions on which buttons to hit..
How many times do I hit volume down to accept yes I want to wipe it?
Or if I need to restart and choose another option.... because I already selected wipe & hit power.
Click to expand...
Click to collapse
How do you know that it's actually doing anything? Seriously, try what I suggested and flash TWRP from the bootloader, I have a feeling that will fix it for you. If not, you can also do the factory reset from the bootloader.
already tried factory reset... & can you navigate me to flash
All I have to go on is this youtube video http://www.youtube.com/watch?v=GmQswv3vKrU
I already restarted my phone into the boot menu
Its not working -_-
.. I went to sleep and its working now
hi,
after my gsm problem
http://forum.xda-developers.com/showthread.php?t=1892837
... i decided to flash a new sbf, i had 198_6 before i did the pudding and rooting and all..
so now i have tried 198_7 .
and during the posses , the rsd lite wrote "please boot up the phone menualy" , then i pull and insert the battery (because the phone was on the m logo) and boot up.
the phone is now is a boot loop.
i can still access the rsd, but what to do? cause i tried the sbf again and same result
You probably missed one very important thing!
It's called - Wipe Data/Factory Reset
Hi,
Its a easy one.
Boot into Android Recovery Mode.
Press Vol Down + Power Button and then scroll to Android Recovery
Once you're in recovery mode you will see Android Logo.
At that point Press the Vol Down + Vol Up button togather.
You will get menu thing.
Do Wipe Data / Factory Reset.
Once its done. Reboot System and that should fix it.
Hope it helps.
Thanks.
i don't think that when flashing sbf that wipes everything rewire Wipe Data/Factory Reset from cmw recovery....
but lets say that it does...
what am i doing now ? the cmw recovery is gone, as well as the unlock .
any suggestions?
kikloo said:
Hi,
Its a easy one.
Boot into Android Recovery Mode.
Press Vol Down + Power Button and then scroll to Android Recovery
Once you're in recovery mode you will see Android Logo.
At that point Press the Vol Down + Vol Up button togather.
You will get menu thing.
Do Wipe Data / Factory Reset.
Once its done. Reboot System and that should fix it.
Hope it helps.
Thanks.
Click to expand...
Click to collapse
i'm doing it right now.. will popst later on
kikloo said:
Hi,
Its a easy one.
Boot into Android Recovery Mode.
Press Vol Down + Power Button and then scroll to Android Recovery
Once you're in recovery mode you will see Android Logo.
At that point Press the Vol Down + Vol Up button togather.
You will get menu thing.
Do Wipe Data / Factory Reset.
Once its done. Reboot System and that should fix it.
Hope it helps.
Thanks.
Click to expand...
Click to collapse
thanks !
the phone booted up..
but i sorry to say that im still getting "international roming" and my simdoesnt work
havlaz said:
thanks !
the phone booted up..
but i sorry to say that im still getting "international roming" and my simdoesnt work
Click to expand...
Click to collapse
Hi,
Just root your phone using the OCR file I have attached. Its pretty simple.
Just extract the files somewhere on your HDD in a folder. Then run root.bat file. Be sure that phone in is Debug Mode.
After you have rooted. Install app. like Root Explorer etc.
Once Root Explorer or similar app in installed goto /system/apps
Delete sprintconnmoplugin.apk and sprintconnmoplugin.obex
Thats it. Now restart your phone and you're done.
Thanks.
thanks mate.. i did it..
but i still getting any signal..
and yesterday everything was just fine.. i had cm7 and was happy..
maybe flashing cm7 will work it out? (i don't think so)
havlaz said:
thanks mate.. i did it..
but i still getting any signal..
and yesterday everything was just fine.. i had cm7 and was happy..
maybe flashing cm7 will work it out? (i don't think so)
Click to expand...
Click to collapse
Hi,
Which country you are in and what connection type you have ? GSM or CDMA ?
Have you tried going into Settings > Wireless & Networks > Mobile Networks > Network Mode ???
Select the appropirate type of network you have. If you're on GSM then select: Any GSM/UMTS
Thanks.
im from Israel
and of-course i did it....
even tried another sim, from a different provider.
when im searching networks i can see my network , but when i'm signing in i get the "!" mark above that the network is unavalable
havlaz said:
im from Israel
and of-course i did it....
even tried another sim, from a different provider.
when im searching networks i can see my network , but when i'm signing in i get the "!" mark above that the network is unavalable
Click to expand...
Click to collapse
Hi,
1. Are you on CDMA or GSM ?
2. Are the SIMS working in some other phone ?
Thanks.
GSM
and yep, they do.
i send a massage from the phone to another phone of mine, and after 10 min it recived.. it seems that the connaction (at least with one sim) in coming and going..
the original sim dont connect at all.
any ideas?
havlaz said:
GSM
and yep, they do.
i send a massage from the phone to another phone of mine, and after 10 min it recived.. it seems that the connaction (at least with one sim) in coming and going..
the original sim dont connect at all.
any ideas?
Click to expand...
Click to collapse
Did you download the proper stock SBF or some other ?? The stock always works for me no matter from which ROM i am coming back. I think most probably its related to the settings or the SBF you rsd'ed.
Thanks.
kikloo said:
Hi,
Its a easy one.
Boot into Android Recovery Mode.
Press Vol Down + Power Button and then scroll to Android Recovery
Once you're in recovery mode you will see Android Logo.
At that point Press the Vol Down + Vol Up button togather.
You will get menu thing.
Do Wipe Data / Factory Reset.
Once its done. Reboot System and that should fix it.
Hope it helps.
Thanks.
Click to expand...
Click to collapse
kikloo said:
Did you download the proper stock SBF or some other ?? The stock always works for me no matter from which ROM i am coming back. I think most probably its related to the settings or the SBF you rsd'ed.
Thanks.
Click to expand...
Click to collapse
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US
original firmware.
and the sim doesn't work.
havlaz said:
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US
original firmware.
and the sim doesn't work.
Click to expand...
Click to collapse
Hi,
Its correct. Are you sure that you deleted the 2 files I told you to delete ?
Also use Root Uninstaller app from market to remove sprint apps. maybe they are causing the conflict.
You can go here to see which apps. you can safely remove:
http://androidforums.com/photon-4g-...s-can-i-safely-remove-photon.html#post3086576
Is voicemail of sprint not bothering you ?
Thanks.
i can just flash cm7 again..
it sapose to be ok right?
havlaz said:
i can just flash cm7 again..
it sapose to be ok right?
Click to expand...
Click to collapse
Hi,
Yes you can always try.
Thanks.
i flashed cm7, and still nothing. maybe i need a diffrent radio?
havlaz said:
i flashed cm7, and still nothing. maybe i need a diffrent radio?
Click to expand...
Click to collapse
You can flash CM7 without unlocking ?
unlocking is 3 seccond and cmw is 5.
I have used the tutorial for rooting my phone, it goes through the first stage on pda flashing an insecure rom, phone reboots and i have the yellow triangle, then the phone just locks on black screen, tried running the easy root software, it connects to the phone then stops.
I can enter recovery mode and tried a different kernal but still same problem, Thanks in advance for any help.
Jaycee
jayceemcg said:
I have used the tutorial for rooting my phone, it goes through the first stage on pda flashing an insecure rom, phone reboots and i have the yellow triangle, then the phone just locks on black screen, tried running the easy root software, it connects to the phone then stops.
I can enter recovery mode and tried a different kernal but still same problem, Thanks in advance for any help.
Jaycee
Click to expand...
Click to collapse
reflash stock via odin (get firmware at sammobile.com)
and... dont try to root it again, for sure u screwed up cuz u didnt read enough, i dunno
C4SCA said:
reflash stock via odin (get firmware at sammobile.com)
and... dont try to root it again, for sure u screwed up cuz u didnt read enough, i dunno
Click to expand...
Click to collapse
Couldnt see a flash file for uk s2 on there, but thanks for the info
jayceemcg said:
Couldnt see a flash file for uk s2 on there, but thanks for the info
Click to expand...
Click to collapse
there u go, jellybean; http://www.hotfile.com/dl/200899346/20a7989/I9100XWLSN_I9100OXXLS8_NEE.zip.html
thanks for the link, being a newbie do i use odin and just select pda again ?
jayceemcg said:
thanks for the link, being a newbie do i use odin and just select pda again ?
Click to expand...
Click to collapse
download, unzip the downloaded file until u get a tar.md5 file
got o recovery and wipe data/factory reset (and format system, preload, data and cache if on a custom recovery, check under mount and storage)
reboot to download mode, plug your phone
open odin, click pda, select the tar.md5 file, hit start and wait.
if the phone does boot after flashing, wait a minute, reboot to recovery, wipe data/factory reset and reboot (even if the device boots at first time, i advise u to do this wipe anyway)
back working again, couldnt get into the recovery mode, tried the up volume home and power, also searched and tried the up down power also, all i want to do is unlock my phone lol
jayceemcg said:
back working again, couldnt get into the recovery mode, tried the up volume home and power, also searched and tried the up down power also, all i want to do is unlock my phone lol
Click to expand...
Click to collapse
But now is the phone fixed or not?
Or are u still stuck trying to get into recovery mode?
Remove battery, and press vol up, home, and power. Release the power when samsung galaxy s2 appears but keep holding vol up and home
Sent from my Nexus 7 using xda app-developers app
phone is working, but want it unlocking....cannot access recovery mode, tried Remove battery, and press vol up, home, and power. Release the power when samsung galaxy s2 appears but keep holding vol up and home.
phone it's working fine and you can't get into recovery mode?
Keep trying that combo, do it while the device is off, press it till you get there.
And why the hell do you want to get into recovery in order to unlock the phone?
Sent from the little guy
the guy above recommended i go to recovery and delete all data, so thats what i was trying to do, he also helped get my phone back working, is it possible to unlock without rooting ?
Yes, by getting the unlock code from your carrier.
I suggest you read a couple of threads before you attempt rooting it.
Sent from the little guy
i bought the phone on my carrier from ebay, i have now changed carrier but like the phone.
Root it is.
Did you get into recovery yet?
Sent from the little guy
cant get into recovery mode, struggling now.. think i will just get rid and get a different phone.... been at it for hours with no joy.... thanks for all the help guys
http://forum.xda-developers.com/showthread.php?t=2219755
Follow that tutorial
AndroidPlant
An everyday user.
Hi, I've acquired a NABI 2 to try and repair off a friend but its proving difficult to say the least. I know he was doing something with the firmware but beyond that im not sure.
The current state its in is this: It doesnt power on by pressing the power button. If you enter the recovery menu (VOL +, VOL- and power) the recovery menu displays in the top left with the nabi logo in the centre of the screen. The menu cannot be navigated, either its froze or its unresponsive. If i connect it by usb when in the recovery menu the PC detects it as a MTP USB Device but it fails to install the drivers.
Really i just want this back to factory standard, is their anyway to put this back in working order? I've not a whole lot of android experience so please, treat me as a noob with step by step instructions.
Any help appreciated
Update
As is often the case new things happened after i posted, i can now access the recovery menu. This happened when i tried to instal the stock 2.0.5 from SD card
Rubberduckuy said:
As is often the case new things happened after i posted, i can now access the recovery menu. This happened when i tried to instal the stock 2.0.5 from SD card
Click to expand...
Click to collapse
I'm short on time this Christmas Eve but the general idea is this if it's a US Nabi2: http://forum.xda-developers.com/showpost.php?p=51037177&postcount=21
EXCEPT use the files from here, http://forum.xda-developers.com/showpost.php?p=54871957&postcount=2342
instead of the ones it says to download in the first post I link, use the files from the second post I linked(Nabi 246 files, JB bootloader). It will work but the only trick is which TWRP to start with ICS ot JB. You may have to try one and then the other. After that the procedure should get everything running again.
Ok, i managed to get TWRP working again but its unable to install anything, whenever i try it just shows as in the screenshot. Any further advice?
Rubberduckuy said:
Ok, i managed to get TWRP working again but its unable to install anything, whenever i try it just shows as in the screenshot. Any further advice?
Click to expand...
Click to collapse
It's the wrong TWRP, if you used ICS TWRP use JB or vice versa.
no power on or boot
aicjofs said:
It's the wrong TWRP, if you used ICS TWRP use JB or vice versa.
Click to expand...
Click to collapse
i have no power and no boot after flashing bootloader with JB246bootloader after I flashed 246 stock .. nabi 2
Hi there,
Just at once my Oneplus X got into a Bootloop.* The phone was playing music when it happened.* He keeps restarting after the very first screen.
He was running on the latest original software. No root and the phone is not unlocked.* He is complete original.
Does anyone have an idea what I can do to get my data back or get the phone running again?* I know I can try a factory reset by pressing the power button and hold volume down but I don't want to loose my data and maybe there are some other options I can try??
Thank you for anny idea or suggestion..
you had TWRP installed ? if yes then open that and connect the device to PC, MTP should show internal and external (if any) storage. copy your stuff and flash something else.
Mr.return said:
Hi there,
Just at once my Oneplus X got into a Bootloop.* The phone was playing music when it happened.* He keeps restarting after the very first screen.
He was running on the latest original software. No root and the phone is not unlocked.* He is complete original.
Does anyone have an idea what I can do to get my data back or get the phone running again?* I know I can try a factory reset by pressing the power button and hold volume down but I don't want to loose my data and maybe there are some other options I can try??
Thank you for anny idea or suggestion..
Click to expand...
Click to collapse
Go to oneplus x recovery, and wipe cache and dalvik. Restart and see.
Note: phone is not a "He", phone is "it"
Joshwin Aranha said:
you had TWRP installed ? if yes then open that and connect the device to PC, MTP should show internal and external (if any) storage. copy your stuff and flash something else.
Click to expand...
Click to collapse
No unfortunately I don't have TWRP installed. it's completely original. So I can't try that.
Thanks for your reaction.
saurabh40629 said:
Go to oneplus x recovery, and wipe cache and dalvik. Restart and see.
Note: phone is not a "He", phone is "it"
Click to expand...
Click to collapse
I already tried that, but it did not work. There was no option to wipe the dalvik cache.
Thanks..