Hey Everyone,
What Radios/Modems are compatible with Telus LTE hspa?
Can i use rogers or At&T radios?
Also, Can I back-up my modem with another method than adb (debugging not working)
Thanks, cant wait to get this figured out so I can flash a ROM!
Answeres to your questions are in DEV section...
Related
Hey all,
Some of you might know me from the Titan or Wizard forum, but I am joining the Raphael family today (as long as it shipped!) and have a couple of questions regarding this forum.
I should have my Sprint Touch Pro waiting on me when I get home, and will be aching to flash it before the weekend. I think I've literally flashed my Titan several hundred times, so much so that I've become obsessed by it at times.
My question, and the reason for starting this thread, is to ask about compatibility between the GSM versions and the CDMA version(s) of the Raphael.
I would ASSUME that as long as the ROM doesn't include a different radio, that it 'should' be compatible with either version? Is that assumption correct? I don't want to brick my TP right out of the gate. Basically, since the Titan didn't have a CDMA version of the forum since it was all CDMA, I want to ensure I'm understanding my boundaries venturing outside of the CDMA subforum. Thanks in advance to all that reply!
Please understand a few things when responding:
1. I am not a noob
2. I only flash through the SD method (should tell you I'm familiar with the process of flashing, so please no "you have to unlock your phone first" responses)
3. This is a great community and I can't wait to contribute!
Hello mate. As far as I know it is not possible to flash gsm roms to the cdma diamond. That is why there is a cdma version of the forum.
But again am not too sure. I am in UK with the gsm version but I am curious to find out about this too.
Absolutely do NOT flash a GSM rom on your CDMA device, or visa versa. That being said, at least for the GSM roms they are not carrier specific. I've never owned a CDMA device so i couldn't tell you, but there's a specific thread for those devices.
Back in the pre-pudding days, flashing an AT&T radio on an International Atrix was a bad idea. Now that our bootloaders are unlocked, is that still the case? Is the worst that can happen a soft brick, or are there harder bricks waiting to happen?
It's safe to fastboot protocol with RSDlite. I did it the other day tryng a newer radio sbf. Worked fine. The problem from what I've been reading is downgrading to a previous version after updating with OTA.
frelnik said:
Back in the pre-pudding days, flashing an AT&T radio on an International Atrix was a bad idea. Now that our bootloaders are unlocked, is that still the case? Is the worst that can happen a soft brick, or are there harder bricks waiting to happen?
Click to expand...
Click to collapse
im using at&t radio cwm flashable on a custom at&t 2.3.4 rom now with ram-fix kernel on my asia retail model (international). works fine so far. or if you don't want at&t radio you can try bell's latest radio as well. both works fine for at&t rom. for me at least.
you can download here att radio or bell radio
Hi Pennzoilgtr
Can you tell us exactly what rom - radio etc you are using and links to them if possible?
I have an international and find that custom roms are hard to find as most are for AT&T.
Thanks
Sweep29 said:
Hi Pennzoilgtr
Can you tell us exactly what rom - radio etc you are using and links to them if possible?
I have an international and find that custom roms are hard to find as most are for AT&T.
Thanks
Click to expand...
Click to collapse
i tried Alien by kp and nCrust both works.. for radio as long as you use AT&T rom, you need to flash att or bell radio in order to work properly.. att radio.
and flash this unified international o/c kernel with ram-fix all CWM friendly. works perfect with my asian atrix.
Thank you pennzoilgtr. will try cherry now...
I have a AT&T I717, but don't like the AT&T ICS since I cannot use tethering with Bell network. I am not sure if there is any chance to install Bell official ICS on it. I tried Kies on download mode, but if I input my sn and model number SGH-I717M, it always pops up an error message. I am not sure if the OTA works. Do you guys have similar experiences? Thanks.
shaodx said:
I have a AT&T I717, but don't like the AT&T ICS since I cannot use tethering with Bell network. I am not sure if there is any chance to install Bell official ICS on it. I tried Kies on download mode, but if I input my sn and model number SGH-I717M, it always pops up an error message. I am not sure if the OTA works. Do you guys have similar experiences? Thanks.
Click to expand...
Click to collapse
If you have a AT&T i717 chances are you will not get office Bell ICS. There are a few way of getting tethering to work, BTW.
1) Flash official AT&T ICS, use tethering app like FoxFi
2) Flash official AT&T ICS, root it, use hacks such as Ultracfg trick
3) obviously, flash custom ROMs
4) Wait until devs use Canadian ROMs as base*
* P.S. Not seeing that happen soon though since folks already on LF5 or LF6 but Canadian ROMs (at least for Bell) is only on LF4.
You can use TELUS Stock ICS;
http://forum.xda-developers.com/showthread.php?t=1771979
There is NO carrier bloat at all on TELUS ICS.
Much appreciated, guys. I will try the Telus ROM first.
After using odlin to flash boot and system, system halts on Telus LTE page.
No idea if it's caused by AT&T modem because I did not flash it yet.
Anyway, go back to AT&T official ROM and use FoxFi now.
noobe question what is the best working fascinate rom that will work on AT&T and how do I set it up?? Thinks
ok I found the answer myself and just wanted to post si if any one elses has the same issue. can not flash a cdma phone to gsm service like at&t
I downloaded Xperia_X10_Firmware_TMobile_UK & Xperia_X10i_2.1.A.0.435_TMOB-UK_GENERIC_1238-8324
Would I be able to install both Firmware & Rom to use with T-mobile USA?
Would this also remove the AT&T lock and accept my T-mobile card?
I haven't tried it yet,I figured I'd ask the experts.
Thanks
f64club said:
I downloaded Xperia_X10_Firmware_TMobile_UK & Xperia_X10i_2.1.A.0.435_TMOB-UK_GENERIC_1238-8324
Would I be able to install both Firmware & Rom to use with T-mobile USA?
Would this also remove the AT&T lock and accept my T-mobile card?
I haven't tried it yet,I figured I'd ask the experts.
Thanks
Click to expand...
Click to collapse
the x10a was made for AT&T, you must first sim unlock the device to get it to work with t-mobile. you can download x10a firmware from THeLogiC's thread here: http://forum.xda-developers.com/showthread.php?t=1749426
since the x10a doesn't have the aws radios required for t-mobile's 3G network, you would only get 2G at best. good luck & hope this helps.