Want to double check before flashing rom - AT&T Samsung Galaxy Note I717

Want to flash a new rom and try out themes but I want to get confirmation on the steps I'll be taking rather than just rely on my search results.
1. I found this for installing cwm:
http://rootgalaxynote.com/galaxy-no...-on-att-galaxy-note-sgh-i717-belltelusrogers/
Since our note isn't built into ROM Manager, I'm failing to see if theres a connection between that program and what is being done in the above tutorial. Kinda confused here and unsure of the next step. Am i just trying to install cwm or am I running a backup of some kind after doing so?
2. I've installed and ran titanium backup (i'm rooted)
3. http://www.chargeforums.com/forum/d...-flashing-roms-return-stock-odin-picture.html
Is all of this correct for our note as well (obviously replacing the pda with the saurom or collective rom)
Anything else I should do?
I know this is newbish but it seems there's a million ways to do this kind of stuff so I want to be sure I'm doing everything the common way that's done around here so it's easier to troubleshoot etc. if I have any issues.

so since your note is rooted and you don't have the clockwork recovery on your note? if not.
the first link that you post is correct for installing cmw.
or
try this
http://forum.xda-developers.com/showthread.php?t=1526431
then flashing Rom.
Dont use the last link you post. it is for Droid.

so the method for flashing a new rom is the same as installing cwm with oden? just simply put my phone in DL mode and open it in pda with oden?
i flashed the cwm using that thread and the oden method. maybe i'm still not understanding what cwm is. am I supposed to do something with it before flashing the rom, or is it something that is just necessary to be flashed onto the phone before flashing the rom? is the titanium backup all I needed to do?
edit: and also will i need to re-setup everything or will restoring all apps+system data with titanium backup after flashing new rom essentially put me back exactly where i was setup wise?

cgibsong002 said:
so the method for flashing a new rom is the same as installing cwm with oden? just simply put my phone in DL mode and open it in pda with oden?
i flashed the cwm using that thread and the oden method. maybe i'm still not understanding what cwm is. am I supposed to do something with it before flashing the rom, or is it something that is just necessary to be flashed onto the phone before flashing the rom? is the titanium backup all I needed to do?
Click to expand...
Click to collapse
I'm a noob as well and I'm only 1 step ahead of you so far. I'm rooted and just installed cwm. I'm ready to install saurom and based on the research I've done you go into cwm (by pressing both up/down vol and power at same time).
That's where you will install saurom and without rebooting install the att fix. Assuming you downloaded the files and transferred them over to sd card. That's all the info I've gathered so far.
As soon as I installed cwm I immediately made a backup of my stock rom. I highly suggest you backup your stock as well. This is a great easy tutorial on how to do it. If anything goes wrong with installing custom roms you can simply go back to stock.
http://www.youtube.com/watch?v=2t8dITifFnc
---------- Post added at 08:42 PM ---------- Previous post was at 08:01 PM ----------
Not to hijack your thread but I was about to post about this same topic and wanted confirmation on the steps.
1. root the note -check
2. install cwm - check
3. make backup of stock rom - check (or is using titanium backup the same thing?)
4. download "saurom_ATT_APN_US_Fix_.zip" and "SAUROM_XLA2_RCVI.zip" and transfer to sd card.
5. enter cwm mode by hitting up/down vol and power buttons at same time.
6. navigate to the files and install saurom and without rebooting install att fix.
7. reboot and that's it??
Do I need to do anything else?

BLASTphemus said:
Not to hijack your thread but I was about to post about this same topic and wanted confirmation on the steps.
1. root the note -check
2. install cwm - check
3. make backup of stock rom - check (or is using titanium backup the same thing?)
4. download "saurom_ATT_APN_US_Fix_.zip" and "SAUROM_XLA2_RCVI.zip" and transfer to sd card.
5. enter cwm mode by hitting up/down vol and power buttons at same time.
6. navigate to the files and install saurom and without rebooting install att fix.
7. reboot and that's it??
Do I need to do anything else?
Click to expand...
Click to collapse
Not a highjack at all, that's more help than I started with. Hopefully someone can confirm your steps and we can get this flashed! I just made a full backup with cwm as well.

I would say stop using google and search here on XDA in the DEV section for the i717 (the Note) before you wind up flashing a ROM not meant for this phone.
The key here is read, read, read and then read more. Evey thing you need to root, flash CWM (specific version for the i717) and install any custom ROM is here on XDA.
Be VERY careful and understand that if you flash with ODIN (depending on what you flash - system, kernel etc) you may increase your flash counter. Most of the rooting methods and utilities indicate if the counter will increase or not.
TiBa - backups up your apps and setting on booted up
CWM - tool to wipe various areas of the device, flash ROMs and install packages
Nandroid Backup - backups up your ROM and is done once inside CWM.
read this...
http://forum.xda-developers.com/showthread.php?t=1483113
Be sure you understand how to return to stock just in case that becomes necessary down the line.
ss

How to Flash a ROM????
Basic Steps
! Choose the ROM that you want and download its .zip file
!! Transfer the zip file to your phone’s sd card. Do not put it into any folder.
!!! Turn off your phone and reboot into recovery, usually by holding the down button and power button at the same time.
!!!! Do a Nandroid backup
!!!!! Wipe the phone 3 times by clearing cache/factory restore 3 times and wiping dalvik cache and system format
!!!!!! Flash the zip file that you put on your sd card
!!!!!!! Reboot phone
Click to expand...
Click to collapse
I'm not sure how to do a nandroid backup... not sure what it is. Didn't find any specific topics on it searching here and nothing in the play store. how is this backup different from the backup using cwm recovery mode> backup ?
Are the above steps otherwise good? It seems different ROM's have different instructions for installing them, from what I've gathered. I guess I'm going to try saurom first, btw since I really like the transfuzion theme.

cgibsong002 said:
I'm not sure how to do a nandroid backup... not sure what it is. Didn't find any specific topics on it searching here and nothing in the play store. how is this backup different from the backup using cwm recovery mode> backup ?
Are the above steps otherwise good? It seems different ROM's have different instructions for installing them, from what I've gathered. I guess I'm going to try saurom first, btw since I really like the transfuzion theme.
Click to expand...
Click to collapse
a nandroid back is done from inside CWM. Go to the backup and restore and backup. This will backup your current rom to the SD Card (internal or external depending on which option you pick) in the clockwork mod folder. This will save your current rom exactly how it is. You want to do this before flashing anything generally.
To flash a new Rom, you will want to make sure you have done a nandroid back up, make sure all the necessary files are on your sd card. Boot into CWM (hold vol up and down and power, when it turns off it will vibrate, let go of power and hold vol up and down until you are in CWM). Then you want to wipe all data (factory reset), wipe cache, wipe dalvik cache (in advanced menu). Then install zip from sd card, find your rom zip file and flash that. This is what i usually do. I am not 100% sure the complete wipe is necessary for the Note, it was on my old Inspire, so I still do as it is habit and good practice.

I had already posted a response but apparently it disappeared. So I guess I did an n Android backup already with Cwm I just didn't realize that's what it was called.
I guess with those instructions it seems very straight forward. My only question now I think is with regards to the kernel. On the first page in the saurom thread there is talk about using a specific kernel, do I still need to worry about this?
Sent from my Samsung Nizzote

cgibsong002 said:
I had already posted a response but apparently it disappeared. So I guess I did an n Android backup already with Cwm I just didn't realize that's what it was called.
I guess with those instructions it seems very straight forward. My only question now I think is with regards to the kernel. On the first page in the saurom thread there is talk about using a specific kernel, do I still need to worry about this?
Sent from my Samsung Nizzote
Click to expand...
Click to collapse
A backup in CWM will save your entire devices settings exactly as you have them, including apps and settings.
Use titanium backup only for app backups. You press menu -> batch -> backup all user apps.
Usually it is stated to not restore apps WITH user settings but I haven't had any problems with saurom after doing such.
Also, I believe saurom uses either da_g's overclocked kernel or holokernal. You don't have to worry about that part as it is baked into the ROM.
Sent from my SAMSUNG-SGH-I717 using XDA

Coffinfeeder said:
Also, I believe saurom uses either da_g's overclocked kernel or holokernal. You don't have to worry about that part as it is baked into the ROM.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Thanks! I thought they were built into it but want sure. So I'm all backed up.. All I have to do now is follow the simple steps above to install the ROM, then restore my apps with titanium?
Sent from my Samsung Nizzote

cgibsong002 said:
Thanks! I thought they were built into it but want sure. So I'm all backed up.. All I have to do now is follow the simple steps above to install the ROM, then restore my apps with titanium?
Sent from my Samsung Nizzote
Click to expand...
Click to collapse
Correct, sounds like you have it!

Flashed, restored, transfuzion themed, all good
Sent from my Samsung Nizzote

yes that is correct....yipppy

Yes it was incredibly easy. Much easier than trying to get a student Dev account for windows phone to unlock it... boy was that a pain! The only annoying part here was having to one by one install my old apps with TB. If dev picks up for this phone I might have to cave for the pro version.
Thanks guys.

cgibsong002 said:
Yes it was incredibly easy. Much easier than trying to get a student Dev account for windows phone to unlock it... boy was that a pain! The only annoying part here was having to one by one install my old apps with TB. If dev picks up for this phone I might have to cave for the pro version.
Thanks guys.
Click to expand...
Click to collapse
Pro version is definitely worth it. With the devs I see coming to the Note, we will have a bustling dev community in no time.
Sent from my SAMSUNG-SGH-I717 using Tapatalk

Related

[Q] Trouble with Liberty3 rom

Hi, thanks for even clicking on this, I am a noob!
I am trying to install the Liberty3 rom for my DROID X2. I have wiped my data, I'm rooted with Superuser and the zip is in my /sdcard/clockworkmod/ folder. The exact address is /sdcard/clockworkmod/Liberty3X2-1.0Gold.zip
The answer might be very clear to you but as for me i am very new so please but it in the simplest terms possible and if you can list step by step instructions. I am not picky at all about the rom, I just want one that can help me save battery life and/or is better in any way than the stock one.
Thanks so much!
Also i am on 2.3.4
Do you have system recovery installed? If not you can find it in the development section.
Sent from my DROID X2 using xda premium
awsamb said:
Hi, thanks for even clicking on this, I am a noob!
I am trying to install the Liberty3 rom for my DROID X2. I have wiped my data, I'm rooted with Superuser and the zip is in my /sdcard/clockworkmod/ folder. The exact address is /sdcard/clockworkmod/Liberty3X2-1.0Gold.zip
The answer might be very clear to you but as for me i am very new so please but it in the simplest terms possible and if you can list step by step instructions. I am not picky at all about the rom, I just want one that can help me save battery life and/or is better in any way than the stock one.
Thanks so much!
Also i am on 2.3.4
Click to expand...
Click to collapse
I am confused as to why ur zip is in a clockworkmod folder?
did u put it there?
if u r using rom manager just stop there and start over.
download the rom zip from the.liberty thread located in development section.
then download and install x2 bootstrap recovery. find the link in the sticky posted by booked in development section. the link to liberty rom can also be found there.
also b4 flashing make sure ur android version is 2.3.4(settings>about phone>android version)
make a nandroid backup first.
check the general section for instructions on how to install BSR(bootstrap recovery, aka system recovery ) and how to use it. the tutorial was posted by MoonShadow and is a sticky in general section.
good luck
ashclepdia said:
I am confused as to why ur zip is in a clockworkmod folder?
did u put it there?
if u r using rom manager just stop there and start over.
download the rom zip from the.liberty thread located in development section.
then download and install x2 bootstrap recovery. find the link in the sticky posted by booked in development section. the link to liberty rom can also be found there.
also b4 flashing make sure ur android version is 2.3.4(settings>about phone>android version)
make a nandroid backup first.
check the general section for instructions on how to install BSR(bootstrap recovery, aka system recovery ) and how to use it. the tutorial was posted by MoonShadow and is a sticky in general section.
good luck
Click to expand...
Click to collapse
+1 rom manager + X2=lots of forum posts
If you dont have it, you NEED Bootstrap Recovery. Clockwork Mod Doesnt work on our phones. As was mentioned, look in the development forum. It should be the first thread listed. You'll find a link in there.
Well, your rooted, so that a good start. Saves time in writing this out. But Clockwork recovery doesn't work on DX2 because of the locked Bootloader. You NEED to install the Bootstrap for it. Which can be downloaded directly from here. http://tinyurl.com/8ykmm6p (I shorten the link because it was SO long, but this is from this thread http://forum.xda-developers.com/showthread.php?t=1166508)
Here is what you should do in order to flash Liberty on. (Because your rooted and on 2.3.4, I'm skipping some steps)
Please place the .zip to flash Liberty in the root one of your SD cards
Also, go into Settings>Applications and turn on Unknown Sources and Settings>Applications>Development to turn on USB Debugging
1. Download 'Bootstrap_signed.apk' and place it on your SD card. (Download: http://tinyurl.com/8ykmm6p)
2. Install the Bootstrap on the stock OS (any file manager can do this). After that, open it and give it root access.
3. Press Install Recovery!
4. AFTER you've pressed that and it's said sucessful, Plug your phone into a WALL charger! (this MUST be a wall charger!)
5. After you've done that, press 'Recovery Mode'. it will then reboot into the custom recovery.
6. Once in there, Wipe your Data, Cache and Dalvik cache (on advanced).
7. Now go to 'Install update from .zip'. Then choose the SD you placed your Liberty .zip ROM.
8. Select that to install, and let it flash. This won't take too long.
9. Reboot the phone, and WAIT FOR IT TO START UP. I can stand people saying "I've waited for over 2 minutes" - It's suppose to take a long time. You just wipe all the caches and installed a custom ROM... It takes a minute. (Mine usually takes about 5 minutes to totally startup).
That's it! Congratulations, you just installed your first Custom ROM! Give yourself a pat on the back while you bask in the glory of your new speed!
noob here
I also flashed the liberty3 rom on my droid x2 and lost all my contacts....is there a way to get them back....I did a nandroid backup...would i be able to extract them from there...any help would be apreciated....
jaxgmfb said:
I also flashed the liberty3 rom on my droid x2 and lost all my contacts....is there a way to get them back....I did a nandroid backup...would i be able to extract them from there...any help would be apreciated....
Click to expand...
Click to collapse
I believe in liberty settings you can add backup assistant back in.
Do that and sync...
Unless you didn't sync before flashing
Then restore nandroid and sync your contracts to Google or backup assistant
Then flash. Then just sync your contacts back to phone using whatever you used to back then up..

My first time - just some basic question (rooting)

Hi guys,
I used this method to root my phone:
http://forum.xda-developers.com/showthread.php?t=1103399
Everything seems to work fine, and i just installed my first rom (ginger mod), i would like to ask you:
1. Every time i install a new rom, i'll do a wipe for secerity reasons, but by doing this, how come everything i had on the phone doesn't dissapear, like pictures? Doesn't wipe mean factory reset = remove everything on the phone?
2. Every time i install a new rom, does the older one get removed automatic or do they stay left on the phone, if so how do i remove the old stuff?
3. I know this may sound stupid, but do i have the same root every time i install new rom? Because i noticed when i install new rom and i went i to recovery mode i see new color on the Meny, that's normal?
4. Which app is good for beginners to start with, like Rom's and doing backup, which of these should i purchase: titanium backup, rom manager P, rom toolbox P.
thanks guys,
1. Internal SD card data remains. Can't tell you why it just does.
2. Old Rom is replaced. No need to remove it.
3. Each Rom has its own kernel. That kernel may or may not be rooted.
4. Titanium backup. Also do backup via CWM.
Sent from my GT-I9100 using XDA App
aceofclubs said:
1. Internal SD card data remains. Can't tell you why it just does.
2. Old Rom is replaced. No need to remove it.
3. Each Rom has its own kernel. That kernel may or may not be rooted.
4. Titanium backup. Also do backup via CWM.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Thank you for the quic answers,
1. when you're talking about the CWN, do you mean the one in the Rom manager?
2. So each rome, has their own root theme if i understood this correctly, so i don't need to worrie about re-rooting the device or something like that, because each rom has their own theme and meny?
3. which rom do you use and why, do you think that ginger-mod is good?
thanks again.
Darwichee said:
Thank you for the quic answers,
1. when you're talking about the CWN, do you mean the one in the Rom manager?
CWM not rom manager CWM is the modified recovery menu or CWM app .
2. So each rome, has their own root theme
No not all custom roms are rooted
jje
Click to expand...
Click to collapse
Darwichee said:
3. which rom do you use and why, do you think that ginger-mod is good?
thanks again.
Click to expand...
Click to collapse
One you did a backup with your ClockWorkMod recovery, you can experiment as much as you wish. You can go with various TouchWiz-based roms. You can try CyanogenMod or MIUI, which are completely different. And if you don't like them, just restore the backup.
Sent from my GT-I9100 using XDA App
TheSniperFan said:
One you did a backup with your ClockWorkMod recovery, you can experiment as much as you wish. You can go with various TouchWiz-based roms. You can try CyanogenMod or MIUI, which are completely different. And if you don't like them, just restore the backup.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
1.Ok guys, i soon understand everything. I never did a backup on any roms. Here's the deal. When i first rooted the device, i used this method:
http://forum.xda-developers.com/showthread.php?t=1103399
2.I also got the CWM app with this root, and superuser( which i dont know what this do), but now when i installed Ginger-mod, suddenly i don't have the CWM app anymore, which i guess is normal?
3.So please can you explain this for me. Lets say i have ginger-mod now, but i decide i want to install CM7 now, but before i do this, i'll have to do a backup of the ginger-mod if something goes wrong with the CM7, am i right so far?
So i'll have to install this CWM app (where i find it?) and make a backup, and then try a new rom. But if i make a wipe before installing new rom, wont the CWM app dissapear or something like that? Or if i install new rom again, will the CWM app be gone again?
I know my English grammer isn't that great, but i'll hope you understood me anyway.
thanks again
Darwichee said:
2.I also got the CWM app with this root, and superuser( which i dont know what this do), but now when i installed Ginger-mod, suddenly i don't have the CWM app anymore, which i guess is normal?
Click to expand...
Click to collapse
The CWM app is a manager for the ClockWorkMod-recovery. The ClockWorkMod-recovery is a replacement for the stock Android-recovery. You enter the recovery by shutting your device down, holding volume-up and home and then pressing the power-button until you see the galaxy s2 logo. The CWM-app does not give you root-rights, in fact, it requires root-rights to work properly.
The SuperUser app gives you the root-rights. On OS' like Linux (and of course Android) there is one user called "root" (or superuser). He is basically what the Administrator was for Windows before Vista, having full access to everything.
The superuser-app manages what apps get root-permissions. You'll notice when it happens, because whenever an app wants to gain root-permissions, you'll see the superuser-app popping up and asking you if this is OK.
The fact that you don't have the CWM-App is no problem, as it just manages the recovery. The recovery itself does not need additional apps to be installed.
Darwichee said:
3.So please can you explain this for me. Lets say i have ginger-mod now, but i decide i want to install CM7 now, but before i do this, i'll have to do a backup of the ginger-mod if something goes wrong with the CM7, am i right so far?
Click to expand...
Click to collapse
Enter the cwm-recovery (already said how you do this). You'll find various menus. One of them is the "Backup and Restore"-menu. You'll just create a backup to your internal or external sdcard (as you wish). When it is completed (without errors), you can safely flash any other rom. If you want to come back, you just enter cwm again and restore the backup.
You don't have to create a backup, but it's always good to have one of a working system.
Darwichee said:
So i'll have to install this CWM app (where i find it?) and make a backup, and then try a new rom. But if i make a wipe before installing new rom, wont the CWM app dissapear or something like that? Or if i install new rom again, will the CWM app be gone again?
Click to expand...
Click to collapse
As I already said, you don't need the app. If your kernel does not provide it (it's just not there from the start), live with it. Everything you do in this app will just start the cwm-recovery anyway.
The ClockWorkMod-recovery is the "standard" for custom-roms. You can be sure that, if you flash another rom, it will have it too. And if your Rom does not come with CWM (like a stock-rom), you can just flash a kernel with cwm again (like Siyah).
Hope this clears things up for you. If you have any more questions (even if you think they're stupid) ask us here. It's better to ask twice, than to break something.
Happy new year!
TheSniperFan said:
The CWM app is a manager for the ClockWorkMod-recovery. The ClockWorkMod-recovery is a replacement for the stock Android-recovery. You enter the recovery by shutting your device down, holding volume-up and home and then pressing the power-button until you see the galaxy s2 logo. The CWM-app does not give you root-rights, in fact, it requires root-rights to work properly.
The SuperUser app gives you the root-rights. On OS' like Linux (and of course Android) there is one user called "root" (or superuser). He is basically what the Administrator was for Windows before Vista, having full access to everything.
The superuser-app manages what apps get root-permissions. You'll notice when it happens, because whenever an app wants to gain root-permissions, you'll see the superuser-app popping up and asking you if this is OK.
The fact that you don't have the CWM-App is no problem, as it just manages the recovery. The recovery itself does not need additional apps to be installed.
Enter the cwm-recovery (already said how you do this). You'll find various menus. One of them is the "Backup and Restore"-menu. You'll just create a backup to your internal or external sdcard (as you wish). When it is completed (without errors), you can safely flash any other rom. If you want to come back, you just enter cwm again and restore the backup.
You don't have to create a backup, but it's always good to have one of a working system.
As I already said, you don't need the app. If your kernel does not provide it (it's just not there from the start), live with it. Everything you do in this app will just start the cwm-recovery anyway.
The ClockWorkMod-recovery is the "standard" for custom-roms. You can be sure that, if you flash another rom, it will have it too. And if your Rom does not come with CWM (like a stock-rom), you can just flash a kernel with cwm again (like Siyah).
Hope this clears things up for you. If you have any more questions (even if you think they're stupid) ask us here. It's better to ask twice, than to break something.
Happy new year!
Click to expand...
Click to collapse
thank you, you explained everything perfect. I think i can manage figure out the rest by my self. Just one last question:
I noticed to good programs, and where you also could do a backup for your rom's and much more:
# Rom manager (Premium)
# Root toolbox (Pro)
Which one of these would you suggest for a beginner friendly UI and settings, do you use one of these?
thanks, and happy new year.
You don't need them. The ROM-manager is just an app like the cwm-app. It handles your ClockWorkMod-recovery. It does nothing itself. Once you click create backup, your phone will reboot into the ClockWorkMod-recovery, which will do the job.
However for the ROM-manager to work, you need to install the ClockWorkMod-recovery that shops with it. Just stick with the version of your kernel. This avoids confusion.
Besides that the ClockWorkMod-recovery is beginner-friendly. Just don't touch any options, you don't know what they do.
I recommend you to get a kernel with the latest recovery. The Siyah-kernel. It is compatible to practically every ROM out there. Just reflash the kernel after you flash a ROM.
Sent from my GT-I9100 using XDA App
TheSniperFan said:
You don't need them. The ROM-manager is just an app like the cwm-app. It handles your ClockWorkMod-recovery. It does nothing itself. Once you click create backup, your phone will reboot into the ClockWorkMod-recovery, which will do the job.
However for the ROM-manager to work, you need to install the ClockWorkMod-recovery that shops with it. Just stick with the version of your kernel. This avoids confusion.
Besides that the ClockWorkMod-recovery is beginner-friendly. Just don't touch any options, you don't know what they do.
I recommend you to get a kernel with the latest recovery. The Siyah-kernel. It is compatible to practically every ROM out there. Just reflash the kernel after you flash a ROM.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You have been veryhelpful, i've learned a few things now thanks to you. Just some last questions then i'm fine.
1. I've downloaded Siyahkernal from his website http://www.gokhanmoral.com/ and as you see, i can choose between TAR, and Zip (download), which one of them is it that i put under the PDA in Odin? Or it doesn't matter which i download?
2. So after every Rom install i make, i install Siyah-kernal, let's say i installed Ginger-Mod, and this mod has Darkknight kernal, and now i install Siyah, will Siyah replace the other kernal, or will those 2 stick with eachother?
3. Just so i don't make any misstakes, installing kernal, is like installing root for the first time right? Meaning = 1, Put phone into download mode. 2.Put the kernal file in PDA 3. Press start?
4. I've noticed that there's a new version av Siyah 2.6.4, is this stable, and have he released it for download yet, because i couldn't find it?
Thanks for every answer you giving me. I feel much safer allready =).
Darwichee said:
You have been veryhelpful, i've learned a few things now thanks to you. Just some last questions then i'm fine.
1. I've downloaded Siyahkernal from his website http://www.gokhanmoral.com/ and as you see, i can choose between TAR, and Zip (download), which one of them is it that i put under the PDA in Odin? Or it doesn't matter which i download?
ODIN is TAR CWM is ZIP .
2. So after every Rom install i make, i install Siyah-kernal, let's say i installed Ginger-Mod, and this mod has Darkknight kernal, and now i install Siyah, will Siyah replace the other kernal, or will those 2 stick with eachother?
REPLACE
3. Just so i don't make any misstakes, installing kernal, is like installing root for the first time right? Meaning = 1, Put phone into download mode. 2.Put the kernal file in PDA 3. Press start?
YES
4. I've noticed that there's a new version av Siyah 2.6.4, is this stable, and have he released it for download yet, because i couldn't find it?
No idea read the siyah thread .
No point asking is anything stable its development forum and as 2.6.3 was only released two days ago i guess not .
Stable = stock .
Once you start you have to be prepared for problems though 90% do not have a problem some do .
Rooting or Custom rom voids warranty .
jje
Click to expand...
Click to collapse
As JJEgan said.
4. You can see what the developer is working on while he is doing it. Therefore the changelog for the latest release is what to expect for the next version.
Sent from my GT-I9100 using XDA App
TheSniperFan said:
As JJEgan said.
4. You can see what the developer is working on while he is doing it. Therefore the changelog for the latest release is what to expect for the next version.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Ah ok, i see. But do you think i should use the 2.6.3 version( since it's new), or is there any older version that's more stable?
Answer to Jjegan:
Yes i know, but there's allways something els you can say to the store, because they can't proof my phone got destroyed by rootinng,or can they?
Thanks guys.
Go with the latest one and, if you experience any problems, look for an update or downgrade, if there is none available yet.
Sent from my GT-I9100 using XDA App
TheSniperFan said:
Go with the latest one and, if you experience any problems, look for an update or downgrade, if there is none available yet.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I started to notice another problem.
Sometimes CWM wont recognize my external SD, example: I have put kernal, and roms in it, and when i want to flash these, i only get "no files found". And sometimes it work, but often it wont.
What can i do about this?
Sometimes cwm mistakes the internal for the external. Just take the other option.
Besides that, better update to Siyah 2.6.4. The ClockWorkMod there is more reliable.
Sent from my GT-I9100 using XDA App

ROM Manager

I've just rooted my device....first time ever, and just going through many of the lists of things to install and do. ROM Manager seems to be mentioned on every site. I installed it, was going to try and make a nandroid backup before I venture into flashing a custom ROM. First off, when I try to put in my Recovery Setup, I dont see the Galaxy S4 in the list of phones. Right now it just says Current Recovery: ClockworkMod 5.x.x.x
I thought this was correct, but when I go to "Reboot into Recovery" and try to make a backup....there is no option to make a backup on the startup list.
I've never used ROM manager before....have no idea what I need to change as I cant even find any GS4 listed. I was assuming I set it up incorrectly and thats why I couldnt backup. Anyone know what might be going on here?
Any help here? I'm confused, to get ClockworkMod Recovery to install....you install ROM Manager correct? I've uninstalled ClockworkMod ROM Manager and reinstalled it, still dont have the option to select a GS4 and no option to make a backup when in recovery mode. I do need to use this to make a recovery of my phone if I flash a new ROM and want to go back correct?
Every video I've seen of people setting this up on their GS4, find a GS4 on the phone list....why dont I see one? Is there another component needed to use this properly?
stringboi said:
Any help here? I'm confused, to get ClockworkMod Recovery to install....you install ROM Manager correct? I've uninstalled ClockworkMod ROM Manager and reinstalled it, still dont have the option to select a GS4 and no option to make a backup when in recovery mode. I do need to use this to make a recovery of my phone if I flash a new ROM and want to go back correct?
Every video I've seen of people setting this up on their GS4, find a GS4 on the phone list....why dont I see one? Is there another component needed to use this properly?
Click to expand...
Click to collapse
The current build of cwm recovery for this phone is not supported through rom manager. This phones recoverys are loki patched to bybass bootloader. Easiest way to install cwm is via my all in one tool in yhe development section. If you are already rooted choose preo for recovery step then install cwm steo. Full instructions and things to watch for are in the 1st post
bhp090808 said:
The current build of cwm recovery for this phone is not supported through rom manager. This phones recoverys are loki patched to bybass bootloader. Easiest way to install cwm is via my all in one tool in yhe development section. If you are already rooted choose preo for recovery step then install cwm steo. Full instructions and things to watch for are in the 1st post
Click to expand...
Click to collapse
Ok so its not me...I thought I was going crazy here. Thank you so much!
BTW, does ROM Manager need to stay on the phone to do this? (sorry noob here)
I did as you said, everything went fine....but when I reboot in recovery, I still have no option to make a backup. This is the proper procedure to make a backup of your phone before flashing a custom ROM right, or am I going about this the wrong way? I want to make sure I cover my butt if I dont like one or screw it up.
stringboi said:
I did as you said, everything went fine....but when I reboot in recovery, I still have no option to make a backup. This is the proper procedure to make a backup of your phone before flashing a custom ROM right, or am I going about this the wrong way? I want to make sure I cover my butt if I dont like one or screw it up.
Click to expand...
Click to collapse
Did you install a recovery? If so which one?
bkhorn said:
Did you install a recovery? If so which one?
Click to expand...
Click to collapse
I got it to work, I had uninstalled ROM Manager before doing this install method because I thought it was useless....didnt realize that it was needed to load the proper recovery. I'm all good now.....so far =)
I got it to work and am able to backup to the internal SD, but I cant seem to get it to backup to my extSD. Every time I choose external, I get "Cant mount /external_sd" "Cant mount backup path" Using a 64gb Samsung card if it helps....
Thanks again!
Lol. It won't back up ext sd because you don't have that partition..you're all good
Sent from my SCH-I545 using Tapatalk 4 Beta

[Q] how to get another stock recovery to use with TWRP.

I have the sch-i605 rooted with Adam outlers casual root... So I have super such, twrp, and boot loader unlocked. I made a recover backup in twrp and wiped the necessary files and flashed carbon job 4.2.2 ROM.. I got it all setup and it seems to be pretty stable so far. Downloaded additional apps that I want and thought to myself that maybe I should save a recovery of this ROM the way it is so that I could have two recoveries to choose from.. Figured if anything went wrongi could flash back to my stock rom or ifi wanted to flash another custom rom and then go back to my carbon rom setup the way I have iti could easily flash back to it.. So I did another backup thinking I would end up with two backups in my twrp/backups for but when I went there I only had the most recent one (carbon not stock backup)... It's not a huge deal right now cause carbon is working pretty well, but I feel a little in easy that I don't have my stock backup....
Any ideas would be greatly appreciated... Could I use Odin and flash the stock image in download mode or would that in root me? Etc.
Did you backup the rom the first time? You say you backed up the recovery.
natedisme said:
I have the sch-i605 rooted with Adam outlers casual root... So I have super such, twrp, and boot loader unlocked. I made a recover backup in twrp and wiped the necessary files and flashed carbon job 4.2.2 ROM.. I got it all setup and it seems to be pretty stable so far. Downloaded additional apps that I want and thought to myself that maybe I should save a recovery of this ROM the way it is so that I could have two recoveries to choose from.. Figured if anything went wrongi could flash back to my stock rom or ifi wanted to flash another custom rom and then go back to my carbon rom setup the way I have iti could easily flash back to it.. So I did another backup thinking I would end up with two backups in my twrp/backups for but when I went there I only had the most recent one (carbon not stock backup)... It's not a huge deal right now cause carbon is working pretty well, but I feel a little in easy that I don't have my stock backup....
Click to expand...
Click to collapse
I made 2 TWRP backups and didn't see them at first when I pressed the Restore button, but then I pressed the "Storage:..." label under the screen heading title and was able to change the location. After I did that I was able to see my 2 backups. Maybe you'll find your first backup at some other location.
universexda said:
I made 2 TWRP backups and didn't see them at first when I pressed the Restore button, but then I pressed the "Storage:..." label under the screen heading title and was able to change the location. After I did that I was able to see my 2 backups. Maybe you'll find your first backup at some other location.
Click to expand...
Click to collapse
The OP at the below thread had a similar problem and he details how he found the location of his missing backups using a file manager: http://forum.xda-developers.com/showthread.php?p=42674660#post42674660
Nefariouss said:
Did you backup the rom the first time? You say you backed up the recovery.
Click to expand...
Click to collapse
yeah i used twrp to make a backup then afer i got my carbon rom all set up the way i wanted i made another backup the same way. but the only one showing up is the last one (carbon) i did.
universexda said:
I made 2 TWRP backups and didn't see them at first when I pressed the Restore button, but then I pressed the "Storage:..." label under the screen heading title and was able to change the location. After I did that I was able to see my 2 backups. Maybe you'll find your first backup at some other location.
Click to expand...
Click to collapse
unfortunately this wasn't the case for me... i used file manager and es file explorer and i only have one twrp file and its the one that has the carbon rom backup not the stock....
so i remember i had a soft brick once while trying to get adam outlers casual root to work.... i downloaded a stock android 4.1.2 md5 file and .pit file and put the phone into download mode and use the odin app to flash those two files.... so i know if need be i could do that probably again to get back to stock, BUT DOES ANYONE KNOW IF I WOULD STILL BE ROOTED? (IE.. BOOTLOADER UNLOCKED, SUPER SU, TWRP, ANDALL THAT??)
natedisme said:
so i remember i had a soft brick once while trying to get adam outlers casual root to work.... i downloaded a stock android 4.1.2 md5 file and .pit file and put the phone into download mode and use the odin app to flash those two files.... so i know if need be i could do that probably again to get back to stock, BUT DOES ANYONE KNOW IF I WOULD STILL BE ROOTED? (IE.. BOOTLOADER UNLOCKED, SUPER SU, TWRP, ANDALL THAT??)
Click to expand...
Click to collapse
If you have TWRP it will be the recovery that is there when you boot into recovery (ie. Vol up, Home, Power)
If you have root you will either see the root app in your apps or you can use the root checker app in the market.
If you use those files to go back to stock though you will not have root, be unlocked, or have TWRP. The only way to be rooted when going back to stock is to use root66 as the ROM instead of 4.1.2.
Also, WHY THE HELL IS THE LAST SENTENCE ALL IN ****ING CAPS?
Sent from my SCH-I605 using XDA Premium HD app

[Q] Custom Rom Problems?

Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
HeyLookItsKarl said:
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
Click to expand...
Click to collapse
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
SAUROM !!!!
captemo said:
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Click to expand...
Click to collapse
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
HeyLookItsKarl said:
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
Click to expand...
Click to collapse
don't need to apologize to me for anything. the more information the better. not only are there so many phones out there, there are variations of those phones that have gotten people in trouble.
you have the North American version
International version
Korean version
different internals and wont all take same ROM. just be careful my friend.
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
I am looking into this rom, looks pretty interesting. Flashing the "AT&T fix" though, do I put that on my SD card also?
Update: For some reason I can not install rome
I am not sure what I am doing wrong because I have Rom manager do everything when I put the .zip file on my SD card and the phone restarts like normal, I even tried doing it manually in cwm recovery. I have no idea what I am doing wrong. And this rom I know for sure is meant for GB and the i717.
Any suggestions? Thanks again
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
shayneflashindaily said:
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
Click to expand...
Click to collapse
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
HeyLookItsKarl said:
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Click to expand...
Click to collapse
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
No further instructions needed good luck and happy flashing
2§HAYNE
ZacksBuilds said:
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yes
KSoD said:
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
Click to expand...
Click to collapse
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Update your recovery to twrp 2.6
Sent from my SGH-I717 using xda app-developers app
What would updating the recovery do?
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
HeyLookItsKarl said:
Yes
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Click to expand...
Click to collapse
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
ZacksBuilds said:
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
So could I flash using GooManager?
shayneflashindaily said:
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
Click to expand...
Click to collapse
haha, only problem is that the rom hit an error anyways so I'm still lost at what I am doing wrong...
Another question, when I reset all of the settings and stuff before I flash the rom, wouldn't that get rid of titanium back up? then how would I restore my apps and data?
Yes you are right... But first stick your phone in the freezer for 2hrs...then microwave it for 3 mins... It will cause your recovery to reconstruct and see your internal storage enabling developer options to be on... Then hit the rom installer button.
2§HAYNE
---------- Post added at 03:36 AM ---------- Previous post was at 03:33 AM ----------
Disregard last post I put..... Go to super everything thread.....
2§HAYNE

Categories

Resources