Are there any cases that work with the HTC dock?
I don't think so... Seidio and Kidigi make dock that work with certain cases though, as do the generic ebay one may work with some case
Yeah that looks to be true.... I may just have to use a skin.
DarkManX4lf said:
Yeah that looks to be true.... I may just have to use a skin.
Click to expand...
Click to collapse
Have you tried a TPU case they are thin.. I am thinking about selling my trident kraken case and ballistic hc case and going back to TPU
reaper24 said:
Have you tried a TPU case they are thin.. I am thinking about selling my trident kraken case and ballistic hc case and going back to TPU
Click to expand...
Click to collapse
Yeah I have a TPU case but it's too thick to fit into the HTC dock.
I have the dock unfortunately the only thing that will work will be the stick on skins...
Sent from my EVO 3D
DarkManX4lf said:
Yeah I'm have a TPU case but it's too thick to fit into the HTC dock.
Click to expand...
Click to collapse
That sucks lol I figured that is the thinnest case that wasn't a skin. Woulda worked . I just went back to tpu and dumped my kraken and ballistic lol.
Sent from my PG86100 using xda premium
I just carved my HTC dock to fit my Laza 3460 Mah Battery case. Do so at your own peril. Remember any tool can be the right tool, I used a saw to cut off most of the support lip, and a razor knife to carve the slot bigger. Lots of sanding with emery file to smooth it out. Be very careful, the guts are right under the top. This is a job not recommended for hemophiliacs. When your all done I would sand the whole top to give it a even look (Your going to scratch the living **** out of it).
Chetski said:
I just carved my HTC dock to fit my Laza 3460 Mah Battery case. Do so at your own peril. Remember any tool can be the right tool, I used a saw to cut off most of the support lip, and a razor knife to carve the slot bigger. Lots of sanding with emery file to smooth it out. Be very careful, the guts are right under the top. This is a job not recommended for hemophiliacs. When your all done I would sand the whole top to give it a even look (Your going to scratch the living **** out of it).
Click to expand...
Click to collapse
will you post some pics of how it looks?
No need for a picture it looks like ****, but here you go.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my PG86100 using Tapatalk 2
I just got my dock today seidio it has great build quality its not cheap or flimsy at all. I am using a body glove shell and fits perfectly in the dock... I also have cheap eBay dock and it won't hold any case its a tight squeeze with just the phone...
Sent from my PG86100 using Tapatalk 2
I have two of these cause they work with my PT case http://www.htcdepot.com/igrip-perfektfit-charging-dock/3A78A8613.htm
One at home and one in my truck, keeps me from having to switch
Sent from my PG86100 using xda premium
Related
I came across this case and was wondering if anyone has tried it out or anything like it? It looks nice but I'm afraid that it will come apart too easily as it is a two part case, or it might be made of cheap material. Thanks for the advice.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.wirelessground.com/samsung-galaxy-s-ii-i777-case-white.html
i would recommend getting a a TPU kind of case.
Yeah those are good, I got one real cheap on Amazon and it is still holding up pretty well. I just saw this and got curious
i had a backflip, the plastic case really screwed up the paint on it, i got scared of buying "plastic snap on" cases for anything now. lol.
Optimus-Prime said:
i had a backflip, the plastic case really screwed up the paint on it, i got scared of buying "plastic snap on" cases for anything now. lol.
Click to expand...
Click to collapse
Yeah, I was afraid that might happen. I guess I will stick with my TPU case for now . Thanks for the help.
I'm a big fan of my seidio active with the kickstand. Got it for 20 bucks shipped on amazon.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
jkf1983 said:
I'm a big fan of my seidio active with the kickstand. Got it for 20 bucks shipped on amazon.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, but that one is just a little too bulky for me. Does it pick up a lot on lint?
jkf1983 said:
I'm a big fan of my seidio active with the kickstand. Got it for 20 bucks shipped on amazon.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Link? the only one I can find doesn't have a kickstand.
jcracken said:
Link? the only one I can find doesn't have a kickstand.
Click to expand...
Click to collapse
Sorry looks like the kick stand isn't on the i777... I have the i727.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Supertramp609 said:
Thanks, but that one is just a little too bulky for me. Does it pick up a lot on lint?
Click to expand...
Click to collapse
No problem. I don't think it's bulky at all especially compared to the otterbox, made better too in my opinion. And it picks up a little lint but not that much....
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Just remember, white cases turn brown really fast. They show dirt really well. I had a white case for about 3 weeks. Now I'm using my otter box.
Sent from my SAMSUNG-SGH-I777 using xda premium
Seidio Active has been great. Very lightweight but protective. That or Case-mate Pop
Sent from my SGH-I777 using XDA
I decided not to get that case in the OP because of the hard plastic that might scratch the phone, but I ended up getting a two-piece case off Amazon.
http://www.amazon.com/gp/product/B0065SGLRW/ref=oh_details_o00_s00_i00
It was only $2.89 so I had to try it out, I mainly got it because of the cutouts for the volume and power buttons.
Edit: Just in case someone was looking at buying this, it does cover up the top mic..
The pictures on Amazon show a different case which is very upsetting considering you can't even buy that one.
I got the Diztronic Matte Back Black Flexible TPU Case...
It costs almost $10 but It does the job perfectly and you get a screen protector free along with it...
But that's for the tip of the wrong picture on amazon. I do most of my shopping there and it is certainly a shame...
Just put it on my phone. Pictures before the case isn't on the phone were taken by the Evo's camera.
Pictures on the phone were taken with the GS2.
Pro's:
Case is snug
Matte finish feels like quality
Protects camera and screen of scrapes
Con's:
Case just barely fits. Very tight and barely covers front edges from touching. Basically, it fits but its tight.
Sent from my SPH-D710 using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit! - GS2 camera is MUCH clearer in these pix. Yikes.
Thanks for the pics!
How does it compare to that Sprint Gel case?
Good review. I just ordered this case as well. If you were to lay it screen down does the glass touch or does the case hold it off the table?
Sent from my EVO using Tapatalk 2
billyapd21 said:
Good review. I just ordered this case as well. If you were to lay it screen down does the glass touch or does the case hold it off the table?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
It keeps it off the table. I like mine a lot just gotta get used to pushing the buttons. It has an extra raised lip around the camera which helps keep the case thin yet still protect the camera surrounding.
Sent from my EVO using Tapatalk 2
Re: evo pics. Maybe try taking them with HDR or close-up mode. Should get better results than that.
u just made me bought one too
they should give u a free case for ur review
Thanks for the pictures. My case was just mailed out today. I can't wait to get rid off my POS silicone case I got on Ebay.
billyapd21 said:
Good review. I just ordered this case as well. If you were to lay it screen down does the glass touch or does the case hold it off the table?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
It will not touch the screen if its face down. Look at the pic with the dime on the screen. If you were to put a dime on the screen and flipped the phone upside down, you'd scrape
because the case is not raised enough on the sides. Its rather disappointing honestly. I liked the fit of my TPU case on my GS2 more because it was raised around the edges enough to avoid screen scrapes.
flex360 said:
u just made me bought one too
they should give u a free case for ur review
Click to expand...
Click to collapse
I kind of want another case because I think mine MIGHT be defective. I just can't believe the front edges are that low and the case normally fits this tight...
Sent from my EVO using Tapatalk 2
johamsandwich said:
Thanks for the pics!
How does it compare to that Sprint Gel case?
Click to expand...
Click to collapse
It will not get stuck in your picket which is why I prefer TPU to any other material. However I think the gel case provides more protection. I've dropped that onto brick and had no worries. Go with TPU if you're careful and have a desk job.
Sent from my EVO using Tapatalk 2
shook187 said:
Thanks for the pictures. My case was just mailed out today. I can't wait to get rid off my POS silicone case I got on Ebay.
Click to expand...
Click to collapse
Is it worth the hassle to list it? Just curious what kind of experience you have had selling on eBay.
Sent from my New School EVO LTE
I got the Defender on my phone right now....and honestly, I'm slowly killing it. The little plastic clips are breaking, and the charging port cover is half ripped....I need a new case. I really want it to come with a holster though.
Who else makes a solid case & holster for this phone?
I love the Seido Platinum case I bought when I first got the EVO. It's slim and durable. I'm a cable tech and the case still looks brand new, the holster has a gash in it but it's not noticeable. The only problem I do have with it is my phone tends to reboot if I don't position it correctly when I'm driving. The phone's power button gets pushed into the holster causing the thing to reboot.
Sent from my EVO using Tapatalk 2
I have the otterbox commuter case and the seidio active holster. You need to buy them separately but it's like they were made for each other. It's a good combo. I work construction and haven't had any problems.
That`s what i have, the otterbox commuter and the seidio holster both very durable and very strong, and it fits like a charm, go that direction and you wont be disappointed, you should get both for under 40 on ebay.
I've been happy with the one I bought at the Sprint store. It was only 30 came with holster. I use it daily, slim and great clip.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVO using xda app-developers app
I have a Seidio Surface case and holster.
To be honest, I dont like it at all. I've had the seidio surface cases on my previous phones and loved them, but the issue with this one it that the buttons on the Evo 4G LTE's Surface case has raised buttons laying overtop of the real buttons on the phone rather than cutouts like the version for the Evo3D had. I am constantly rebooting or turning down the volume or whatever else.
The fix for seidio would be to have cutouts for the buttons instead of raised inserts. I would love to find one with cutouts instead.
tuffgongfl said:
I've been happy with the one I bought at the Sprint store. It was only 30 came with holster. I use it daily, slim and great clip. View attachment 1336765
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
i have that same case and i also have the otter box defender too.. just so i can have a slim case and a bigger case.. the only thing i dont like about that case is if u drop the phone face down your fu**ed.. other than that its a nice lil case :good:
Has anyone tried the Trident Kraken cases? They're $15 on Amazon and I was considering giving it a try.
http://www.amazon.com/Trident-Incredible-Silicon-Protector-Kickstand/dp/B008VTMHAS/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=3BSWGEOIS4B4P&coliid=I35BM7GLJJFHW3
I would highly recommend the Otterbox Commuter case...
http://www.amazon.com/Otterbox-Comm...XKUS/ref=pd_sim_sbs_cps_6/181-3010289-8058026
You can find it cheaper on other sites. I put tried trident on my phone at a BB and wasn't happy with how the rubber was not tight, just like the Otterbox Defender case. But if you end up pulling the trigger, post a few pics as I possibly could have tried one that someone had returned.
Sent from my GT-P7310 using Tapatalk 2
Trident update
I've been using this case for about a week and a half overall impression is that it would definitely protect my phone if I dropped it. The Silicone sleeve fits a bit loose but once the outer case is on it's secure. The screen protector caught dust faster than any other one I've put on so I'm not using it. It bulks up the phone but that's the cost of the protection. It almost hides the Verizon tag on the front but would rather have all or none.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SetNick said:
I would highly recommend the Otterbox Commuter case...
http://www.amazon.com/Otterbox-Comm...XKUS/ref=pd_sim_sbs_cps_6/181-3010289-8058026
You can find it cheaper on other sites. I put tried trident on my phone at a BB and wasn't happy with how the rubber was not tight, just like the Otterbox Defender case. But if you end up pulling the trigger, post a few pics as I possibly could have tried one that someone had returned.
Sent from my GT-P7310 using Tapatalk 2
Click to expand...
Click to collapse
How much thickness does it add. Just can't deal with a thick phone.
Sent from my HTC Droid Incredible 2 using Tapatalk 2
shorty1993 said:
How much thickness does it add. Just can't deal with a thick phone.
Sent from my HTC Droid Incredible 2 using Tapatalk 2
Click to expand...
Click to collapse
It's just a little thinner than the trident. But I hate to say the rubber has gotten extremely loose. So much, I can pull it almost off on the bottom. I will post some pictures when I get a chance.
Nick
The Kraken adds about 75% to the thickness and just a few mils around the edges.
I have had the otter box cummunter case for over a year. It did get loose around the bottom.
Otter box has a great warranty. If you go to there website, you can file a claims witch will include 2 pictures. They will send you a new replacement case.
The cummunter is a little thinner other there defender case. I'm currently trying out the defender. They sent me the wrong case and told me to keep it and re-sent the commuter case.
If you do get a otter box case and its getts loose but don't want to use there great warranty. Then you can just put the rubber part in hot to boiling water for about a minute. Followed up with ice cold water. It will tighten the rubber right up.
I haven't had a trident case. They look like about the same size or slightly bigger then the defender.
The Kraken is only $10 on Amazon now I picked up a second one with a black sleeve and a mount so I can toss it on my bike to replace by bike computer. Everything has held up well and it takes falls well....
My new Otter Box - Commuter Series. I find it far better than Spigen case, the feeling holding it is awesome! Recommended, well protect and not over bulky.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It came with free screen protector but I never use it as I hate SP. Hehe.
I buy at Malaysia. I believe mine is genuine, If not I not sure what to said already.
The shop I went is listed under http://kwsdis.com/location.html and KWS is listed as Malaysia Authorised Distributor at Otter Box official site.
http://m.otterbox.com/distributors/distributors,default,pg.html
What does the back feel like? Is it slick? The last Otterbox Commuter case I had was slick as snot and I couldn't use the phone with one hand
Novarider said:
What does the back feel like? Is it slick? The last Otterbox Commuter case I had was slick as snot and I couldn't use the phone with one hand
Click to expand...
Click to collapse
It's "brushed" plastic with side grips.
If you put it on a kitchen counter, and try to operate the phone and swipe the keyboard, does the phone spin? If you put it on your pant leg, does it slide off easy?
That thing is slippery as heck. I took mine back after trying it on in the car. Good lip on it though for screen protection. I also like the cut out for the S Pen, very easy to get to. But this isn't the case for me.
I also think it's very slippery. I'm going to return mine and keep using my incipio dualpro. The otterbox is fantastically tough but it's too slippery for me
Sent from my SM-N900V using Tapatalk
I always put my phone at desk camera face up, so no slippery for me.
It is nice hold in hand than Spigen Slim Armor, but yes it is much slippery if you put at desk camera face down.
this otterbox is looking really very nice....this is not available on amazon and ebay.....did you get it from the official web site..????
I got mine from a sprint store.
Sent from my SM-N900V using Tapatalk
Jimmy2u said:
this otterbox is looking really very nice....this is not available on amazon and ebay.....did you get it from the official web site..????
Click to expand...
Click to collapse
I buy at my Malaysia local store.
Got mine today...it is a little slick, but love the thing...hardly any addition of bulk at all. For me it is a keeper.
For those who have a Commuter Case, please provide pics.
yotaman said:
Got mine today...it is a little slick, but love the thing...hardly any addition of bulk at all. For me it is a keeper.
Click to expand...
Click to collapse
hardly any bulk at all? its like putting 2 phones together and 1/4 of an inch on each side wide...
I used it for 20 seconds in the car and went right back int he store for a refund...
neonsector said:
hardly any bulk at all? its like putting 2 phones together and 1/4 of an inch on each side wide...
I used it for 20 seconds in the car and went right back int he store for a refund...
Click to expand...
Click to collapse
To each his own for me there is only one other case I myself am interested in and that's the Slim Armor View when it becomes available.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
harrychimp said:
For those who have a Commuter Case, please provide pics.
Click to expand...
Click to collapse
http://s107.photobucket.com/user/y0taman/slideshow/Phone
they are not the best looking but I also did my best showing it with my empty s-view case for some comparison.
yotaman said:
http://s107.photobucket.com/user/y0taman/slideshow/Phone
they are not the best looking but I also did my best showing it with my empty s-view case for some comparison.
Click to expand...
Click to collapse
Thank you for sharing the pictures.
I have a more clear idea of how bulky the Commuter Case is.