Version RC1 based on Wind 1.46.1500.3.
This ROM is designed for Wind variant only, READ EVERYTHING before flashing
I worked very hard to write the update.zip script and modifing the stock ROM to do this as flawless as possible. I am also providing my own direct mirrors at my own expenses
Everything is done practically from scratch, so any donations will be appreciated!
Boot partition (kernel) will not be touched or included in this ROM, so Wind users can safely flash away!
Features:
------------------------------------------------------------
deodexed
zipaligned on boot
1% battery steps notification icon
overscroll glow (white)
disabled capacitive button lights
allows it to go to mininal brightness when dark enough (autobrightness)
minimum clock speed to 192MHz from stock 384MHz to save battery
my build.prop tweaks
blocked ads
DSP Manager
removed some bloat
removed Wind's bootanimation (that was ugly as hell....)
disable ext4 journaling
sd cache to 2048 to improve speed
updated crap loads of system apps
I am probably missing a few more, can't remember all
Planned Features:
------------------------------------------------------------
30 Media Steps (done)
Transparent Scrollbars so it does not look so "old" (done)
CRT off animation (done, thanks to heyjoe66!)
Webkit text reflow disabled by default (looking into this)
Fix garbled camera preview and video playback (looking into this)
* done means will be added to next release
Bugs:
------------------------------------------------------------
- Mail cannot start and FC every time due to some hard coded lines in Mail.apk, it requires an odexed framework. FIXED IN RC2
- If you are coming from another custom ROM, you must nand restore to original or RUU to global. Otherwise, you will get codec issues for lines in videos and camera previews.
Install instructions:
------------------------------------------------------------
Unlock bootloader
Install TWRP recovery
Nand backup (boot, system)
Flash Clear Wind zip
Reboot
If you are coming from another custom ROM:
Use hasoon2000's toolkit and install original Wind's kernel or flash RUU
Install TWRP recovery
Nand backup (boot, system)
Flash Clear Wind zip
Reboot
Downloads:
------------------------------------------------------------
Clear Wind RC2: forumdoandroid.com
Clear Wind RC1: forumdoandroid.com
Add on's:
------------------------------------------------------------
N/A
Report any problems on here, or PM me
Screenshots:
------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remember to click thanks if you like this!
Nice
Seems Legit. Im in need for the Wind stock ruu and cant find it but this seems like it would work
xTristinx said:
Seems Legit. Im in need for the Wind stock ruu and cant find it but this seems like it would work
Click to expand...
Click to collapse
I will be deploying through fastboot, no need to flash custom recovery theoretically. And the deployment only flashes the system partition, I also have a stock unmodified version of system(not even rooted) so you can always go back to stock if necessary.
So all you need is unlocked bootloader, but you can always relock it after you reflash my stock system.img through fastboot
I'm willing to beta test it
(Side note: I'm in the need of the stock wind rom, hope you have it )
xTristinx said:
Seems Legit. Im in need for the Wind stock ruu and cant find it but this seems like it would work
Click to expand...
Click to collapse
You can find the most recent WIND/GlobaLive RUU's and most others in my public Dev-Host folder (linked below). I uploaded them here because if was very hard to get an open download slot at FileFactory.com (used by Football & TMartin) Dev-Host has been reliable me (I donated a little $$ to them as well, so we can all have easy access to these files).
***I got all of these RUU's from Football & TMartin except Globalive 1.46.1500.3 which is from bbs.gfan.com (Chinese Web Site)***
/krook6023/RUU_Ruby/***I got all of these RUU's from Football & TMartin except Globalive 1.46.1500.3 which is from bbs.gfan.com (Chinese Web Site)***
Turns out, you can't use fastboot to flash images that big.... I am not sure how RUU could. I searched it up, seems like a lot of RUU's are having the same issues.
You will need to use custom recovery, for this one, I chose TWRP. (might work with CWM)
It is in your best interest to do a nand backup for now with your stock unmodified system because I never tried RUU if it can fully recover. I can provide the stock recovery image later so you can restore using custom recovery and flash the original recovery image via fastboot then relock, no need RUU at this point.
You flash RUUs by renaming it to P85IMG.ZIP (correct me if I'm wrong) have it on your sdcard (don't remember if Internal or external) then boot into HBoot. It will find the file and flash it. Not sure if you must relock your bootloader or not.
Wait....I sent this with Tapatalk?
Double0EK said:
You flash RUUs by renaming it to P85IMG.ZIP (correct me if I'm wrong) have it on your sdcard (don't remember if Internal or external) then boot into HBoot. It will find the file and flash it. Not sure if you must relock your bootloader or not.
Wait....I sent this with Tapatalk?
Click to expand...
Click to collapse
Yeah, I am aware of the process, but it is just that i found some other HTC devices getting the errors. I am not sure how RUU handles the process, even renaming it to "P85IMG.ZIP" might end up extracting the img files inside, one of them being system.img.
for the global RUU's, they come in exe format, I think it walks you through the process to restore it, but I never did.
Have you tried adb commands?
Wait....I sent this with Tapatalk?
Double0EK said:
Have you tried adb commands?
Wait....I sent this with Tapatalk?
Click to expand...
Click to collapse
Pretty sure within recovery, I can adb shell and use dd to copy it over, but it will require 1.5GB + on the sdcard for the uncompressed system.img. so yeah, that is why i made the update zip instead, easier for people to use. If they are required to use custom recovery, might aswell make it easy for them
ClearWindRC1.zip - size: 1245184 bytes [modified date: 04/17/2012 02:08:59]
Is it correct file to download?
Just tried to download and it was incomplete every attempt. Not sure if this would make a difference, but I was downloading with my Amaze. Will try again when I get home.
sglscovill said:
Just tried to download and it was incomplete every attempt. Not sure if this would make a difference, but I was downloading with my Amaze. Will try again when I get home.
Click to expand...
Click to collapse
I am not sure what happened. Reuploading it again
I would hit you up with a thanks, mine are all used up for today. Will owe it up tomorrow. The picture looks great though! Nice and tidy rom. I too can not stand the boot animation and all the bloat from the stock rom.
No camera (lines instead of live image), no WiFi (error), no Exchange Sync (force close).
Wiped /data - still no success.
What's wrong? What kernel do I need?
Vadimus_ca said:
No camera (lines instead of live image), no WiFi (error), no Exchange Sync (force close).
Wiped /data - still no success.
What's wrong? What kernel do I need?
Click to expand...
Click to collapse
Because you are using a Wind variant, and you have installed a custom ROM with custom kernel not supported by Wind variant. you need to use the toolkit to flash Wind's kernel and flash Clear Wind again
morrislee said:
Because you are using a Wind variant, and you have installed a custom ROM with custom kernel not supported by Wind variant. you need to use the toolkit to flash Wind's kernel and flash Clear Wind again
Click to expand...
Click to collapse
Can you point out where can I find a stock 1.46.1500.3 kernel?
BTW I flashed [Kernel]Amaze[2.6.35.13](v009)OC~1.73/JRCU/UV/CIFS+UTF-8/Power Saving[Mar-13] kernel now.
WiFi is now working, but still no camera/Exchange.
Are you sure Exchange force close can be kernel-related?
Vadimus_ca said:
Can you point out where can I find a stock 1.46.1500.3 kernel?
BTW I flashed [Kernel]Amaze[2.6.35.13](v009)OC~1.73/JRCU/UV/CIFS+UTF-8/Power Saving[Mar-13] kernel now.
WiFi is now working, but still no camera/Exchange.
Are you sure Exchange force close can be kernel-related?
Click to expand...
Click to collapse
Faux's kernel has different video codec handling, your camera or any other video playback in youtube etc in horizontal will look like that until you install the Wind's kernel. You will need toolkit version 3.1, not 3.0 on xda. you can find it on android-dev.us
I am getting FC's on the Mail app too, I think it is the result of deodexed framework. I see lots of other ROMs are having the same issues logged in thedebug monitor. Anything else FC's?
morrislee said:
Faux's kernel has different video codec handling, your camera or any other video playback in youtube etc in horizontal will look like that until you install the Wind's kernel. You will need toolkit version 3.1, not 3.0 on xda. you can find it on android-dev.us
I am getting FC's on the Mail app too, I think it is the result of deodexed framework. I see lots of other ROMs are having the same issues logged in thedebug monitor. Anything else FC's?
Click to expand...
Click to collapse
No other FC so far.
Just flashed stock kernel. No go, still lines in camera.
Wiped data, system, cache.
Trying to reinstall the rom.
UPD
Performed a clean reinstall. Epic fail.
Same here, getting lines in the camera. Everything else works fine (besides mail FC)
Related
A flashback to when ROM was first booted ... the good ol' days.
SBF is now available on the Team Black Hat App that can be had from Android Market.
Team DeFuse Presents
Vanilla Android 2.4.3
Only use themes made for 2.4.X if you want to keep lots of new features in Fission!!!
Video Install Guides for Fission ROM Manager can be found HERE. Thank you darkonion for making the vids
Text version of instructions located below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Us & ROM:
The first generic Android platform for current and future Droid devices. We are a bunch of mad hackers, modders and developers that were not happy with the current model of Droids being "Blurred" so we began a mission to rid our devices from the blurriness of VZW Android systems. It started with a crazy idea of messing with the Droid2 SDK that has turned into a full fledge AOSP generic type of ROM. We have incorporated many features that were only seen in AOSP ROMs before this. Some of the features include Reboot in Power Menu, custom built Framework, vanilla Android GUI, totally blur free app folder and many more AOSP like features to come in the short term future.
Features:
True Vanilla ROM with generic Android feel, not themed to look line one. No blur apps...
Reboot in Power Menu.
Custom Framework - 10% battery increments with display percent number & without.
Overclock ready out of box.
Lots of free memory.
ROM has root and has been deodexed, and zip alligned.
Busybox installed and symlinks have been applied.
Clean base for you to customize how you like.
And many more...
Fission ROM Manager:
Fission ROM Manager (FRM) is a utility we developed to make modifying your Droid phones much easier. It was designed for the new Android user but also very useful for the more advanced user. You can download ROMs, themes, updates add ons and much more. Once your downloads are done you can install everything within Android. No need to go into recovery any more.
HotFix:
Please see download links for new patches.
Team DeFuse Members:
Developers
AngDroid - Team Leader, Project Manager & Developer
braway - Developer
Drod2169 - Developer
Requiem4D - Developer, IT dude & Kernel Specialist
IRC & Forum Support
WalCs - Support Manager - Developer Assistant
Themers
javroch
MJones1052
barracuda
Joe772
tgwaste
StuntinX
draya1986
Web Design & Maintenance
WebKaiser
Jcatt
Web:
Team DeFuse
IRC:
IRC Server - Freenode.net
Chanel #teamdefuse
Twitter:
@Team DeFuse
@AngDroid
Themes:
Check Fission ROM Manager. Many themes are up.
Changelog:
2.4.2 -> 2.4.3
Removed Sound and Speach Recoder
Added new Sound Recorder that can be launched from App Draw
Added 10% Battery Display option to FRM. Will reset current theme back to Stock Fission.
2.4 -> 2.4.2
DX build gets new framework whcih should fix the random USB reboot when plugging in.
All previous fixes are now included
Latest Android Market
More Code Cleaning
Full version ROMs and Upgrades are available. Upgrade will only replace packages. It will not wipe app or framework folder.
No reason to wipe cache or data if coming from Fission ROM for either Full ROM or Upgrade.
2.2.1 -> 2.4
All Devices are now equal. Perform and look the same.
Framework improvements all around. Colors, placement of graphics...lots of little changes.
Almost all apps for each device have been rebuilt from source. Either from AOSP source or Moto source.
Each device now has device specific apps. Will help of future Blur add on. Many people been asking for many different Blur apps so there will be an add on Blur package. Blur package will be heavily modified Blur services and then each app will be an individual add on.
MMS menu compose graphic now fixed.
Phone mute fixed.
Rebuilt Moto Apps (MediaGallery, Cam and Music) are now standard. They work better and will help with Blur add on. Generic Android Apps will be available on FRM.
All devices now use Moto Multi-Touch keyboards. They are themed as Generic Android Keyboards.
More cleaning of code and tweaks...
Few other changes I can not think of right now
Small bug with Global ROM. If you need to activate, slide out keyboard and hit the number key you need to use.
No need to wipe data or cache if coming from previous Fission ROM; however the installer will wipe your system folder so back up any changes you have made to your system folder.
DO NOT USE 2.3.1 Themes. They will work but you will lose lots of changes. Themers are working hard now to update themes.
I must say these are the best Fission ROMs so far. Lots of love and hard work went into them.
Install Instructions:
All install instructions can be found on Team DeFuse Website.
Bug Reporting:
Please use Our Google Code Project Home to report bugs. You can find it HERE.
Search before posting bug. The bug may have been reported and fixed.
Donations:
Thanks to everyone who has donated. If you would like to contribute to our cause you may do so by clicking HERE, thank you very much.
Downloads:
Droid 2, Droid 2 Global, Droid X, Droid Pro & Fission ROM Manager - DOWNLOAD
By clicking the download link and proceeding to download page, you agree to that you have read everything in this post.
Click HERE if you agree.
Thanks!
im getting a 404 error in fission rom manager, ill try manual for now, just a heads up.
edit: oh...its not up yet (?)
re-edit: im super confused now, RC2 never went up that i know of, and now FRM is showing an rc3 that wont download yet either.
botnryan said:
im getting a 404 error in fission rom manager, ill try manual for now, just a heads up.
edit: oh...its not up yet (?)
re-edit: im super confused now, RC2 never went up that i know of, and now FRM is showing an rc3 that wont download yet either.
Click to expand...
Click to collapse
I work fast
RC3 is downloading fine here...you using lite or full?
well i was using lite, but i think my phones bricked now cause i tried to download the stock d2g rom from frm, flashed it, and now i cant get past the motorola M screen, cant get into bootstrap..nothing.
does this rom remove the protection against us carriers?
xryousukex said:
does this rom remove the protection against us carriers?
Click to expand...
Click to collapse
No. That's another problem entirely.
botnryan said:
well i was using lite, but i think my phones bricked now cause i tried to download the stock d2g rom from frm, flashed it, and now i cant get past the motorola M screen, cant get into bootstrap..nothing.
Click to expand...
Click to collapse
Have you tried a battery yank? If so and it didn't work try again but before turning your device back on open the slider and press and holding the 'x' button. Keeping 'x' pressed down press and hold the power button. Keep them both pressed down. You'll get the M screen but it should boot into recovery.
Sent from my DROID2 using XDA App
yyeah i can get it to boot into THAT recovery, but what good does that do?
Sorry about the market issues guys. It worked at first when I was testing and then it crashed on later when I was not home so I could not fix right away.
RC3 was fixed and uploaded again.
You may have to go back to your OEM backup or RC1/2 backup, download RC3 again install it.
My mistake and sorry...just some stuff that happens when doing this sort of thing
RC4 or finall will be on FRM Full at some today/tonight. I am putting the final touches on it now
botnryan said:
yyeah i can get it to boot into THAT recovery, but what good does that do?
Click to expand...
Click to collapse
Did you wipe cache and data from recovery? Stock or clockwork recovery will do...
Pulled RC3...damn new market keeps crashing...
RC4 will be up in a bit...
botnryan said:
yyeah i can get it to boot into THAT recovery, but what good does that do?
Click to expand...
Click to collapse
If all else fails from recovery you can install your backup and get your phone running again.
Sent from my DROID2 using XDA App
yeah about that, i wasnt expecting issues so i didnt make one :\
EDIT: called verizon, they had me load bootloader and wipe data, of course that didnt work so theyre sending me a new one
Angdroid - you mentioned on your twitter about getting it to work on AT&T and needed a Tmo sim to test, so what rom will this work-around be included in? Thanks!
botnryan said:
yeah about that, i wasnt expecting issues so i didnt make one :\
EDIT: called verizon, they had me load bootloader and wipe data, of course that didnt work so theyre sending me a new one
Click to expand...
Click to collapse
Can you get into clockwork recovery? If so I have an OEM image that you can use.
Rule number 1, always make a back up
noope, only stock recovery.
this is my first android device ive rooted and such so i guess ive learned my lesson about backups. sucks i had to do it the hard way but i guess im a little hard headed. at least i can get it replaced :\
Great job guys. Keep up the good work!
Final or RC5 should be out later tonight. I have one more bug to kill and it will be gold
Any find any issues so far with RC4?
Using rc3, only issue i have is the lack of the reboot option on power button press, and in call menu stuff. Idk if those were updated in rc4 or rc5but im just sayin.
Sent from my DROID2 GLOBAL using XDA App
I don't see the normal post from AngDroid but it appears RC5 is on FRM. Running it right now without any initial issues.
As a followup to my GBTweaked ROM for locked bootloaders, I thought I should start a thread this.
This ROM is based off the Official Sony ICS Beta, and will feature many great tweaks similar to my other ROM.
And the best news, everything CDMA Related will be working!
I plan to have this up and running within the next week or so for unlocked bootloaders, followed by a released for locked as soon as an R800i ICS .tff is released.
Whats Working:
Almost everything thats not related to the CDMA Radio
Whats Sometimes Working:
Calls
Data
Some users are reporting them working, some are not.
Whats Not Working
MMS
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Additional features and download links will be provided over the next few days.
HOW TO:
Locked Bootloaders:
Coming Soon
Locked Bootloaders
Advanced User's Guide
(All download links in the Downloads section below)
1. Backup anything
2. Flash Sony ICS Beta
3. Reboot into recovery. Perform a factory reset
4. Flash DarkforestICS Kernel.
5. Flash ICSTweaked and Gapps
6. Enjoy
Beginner's Guide
1. Backup any apps/data using Titanium Backup or CWM (or if you dont like having your apps, skip this step.)
2. Download the Sony ICS Beta for Xperia Play from here.
3. Extract the contents to the location of your fastboot folder (Default should be "C:\Program Files\Android\android-sdk\platform-tools")
4. Make sure your Xperia Play is turned off, and hold the search button (far right) while plugging your phone into the USB. (Your Notification light should now be blue.
5. Open up command prompt, and cd to the location of your fastboot folder.
6. You should now be able to issue the following commands
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
7. After all flashing is complete, reboot your device, and let it fully boot and configure itself. (If you've done this right, it should boot up the ICS Beta, and you should not be able to receive a signal.)
8. Turn off your device, and go into fastboot mode (as mentioned above.)
9. Download KeiranFTW's ClockworkMod Recovery 5.0.2.8 from here, and boot it up as instructed in his thread.
10. Download ICSTweaked and gapps from the downloads section below. Save them anywhere that you have easy access.
11. Download KeiranFTW's Darkforest Kernel from his thread here, and save it to your fastboot folder.
12. Delete the boot.img you downloaded from the Sony ICS Beta, and rename the kernel you just downloaded to boot.img
13. On your phone, go into "Mounts and Storage > Mount USB Storage". You should now have SDCard access on your computer.
14. Move ICSTweaked and the gapps your downloaded to the root of your SDCard.
15. On your phone, do a full factory reset. Then proceed to flash ICSTweaked.zip, followed by the version of gapps you downloaded.
16. (Make sure your phone is unplugged at this point) After flashing, turn off your phone, and reboot back into fastboot mode.
17. Flash the renamed Darkforest Kernel (should now be boot.img) using the following command.
Code:
fastboot flash boot boot.img
18. Reboot your device, and enjoy the new ROM! First boot should take a while.
Downloads:
Sony ICS Beta
KeiranFTW's ClockworkMod Recovery 5.0.2.8
ICSTWeaked v1
Gapps
Darkforest ICS Kernel
Nice!! Can't wait to see a locked version! Keep up the great work!
Awesome, looking forward to it!!!!!
I hope they update the beta to 4.0.4, there are way too many issues in 4.0.3, looks nice though
How is everything CMDA working?
3G isn't working
Wifi IS
SMS & MMS isn't working
I know you have the R800x ics thread but if you know how to fix these issues please share not just exclusive
This rom isn't for locked bootloader!!
Only possible after official release from sony (becasue of kernel)
only for cdma version??
and is that the google music player??
and hey nice, what happened to ur play?? broken??
ive already done this
FPlusPS3 said:
How is everything CMDA working?
3G isn't working
Wifi IS
SMS & MMS isn't working
I know you have the R800x ics thread but if you know how to fix these issues please share not just exclusive
Click to expand...
Click to collapse
Hence the "week or so" timeframe. He's probably working on it now.
FPlusPS3 said:
How is everything CMDA working?
3G isn't working
Wifi IS
SMS & MMS isn't working
I know you have the R800x ics thread but if you know how to fix these issues please share not just exclusive
Click to expand...
Click to collapse
If you look more closely, you will see he said everything CDMA will be working, not that it already is.
You've got to admire his optimism!
I can not get the analog pads to work on ics
Xperia4life said:
ive already done this
Click to expand...
Click to collapse
Are you daft? Custom ROMs mean that ANYONE can make a specialized version as they choose.
Xperia4life said:
ive already done this
Click to expand...
Click to collapse
IMHO, until someone presents us with an ICS based ROM (not CM based, but Sony based) that has reliably functional CDMA capabilities including true 3G data capability and calling, NO ONE has already done this. Different ones of us have had data and calls working at one point or other but their results can't be duplicated by others following the exac same steps. Heck, I had calls and fully working 3G data at one point, until I made a nandroid to test something else. I could never get it to work again.
netizenmt said:
IMHO, until someone presents us with an ICS based ROM (not CM based, but Sony based) that has reliably functional CDMA capabilities including true 3G data capability and calling, NO ONE has already done this. Different ones of us have had data and calls working at one point or other but their results can't be duplicated by others following the exac same steps. Heck, I had calls and fully working 3G data at one point, until I made a nandroid to test something else. I could never get it to work again.
Click to expand...
Click to collapse
Plus this is a "followup" of GBTweaked.
I just hope 3G Data and call works so we can finally have a real ICS build without any issues...
Pretty excited, as I loved the GBTweaked ROM.
any builds or updates ?
So any news on this seems like a radio silence in the thread . if you need any help testing let me know. Contacted you about that before so if you need me to help please let me know.
Xperia4life said:
ive already done this
Click to expand...
Click to collapse
Already done what? Created his custom rom for him? Dumb statement...
Ah..back on topic. I am *really* looking forward to the unlocked CDMA version. My r800x is thirsty Looks great man!
zektor said:
Already done what? Created his custom rom for him? Dumb statement...
Ah..back on topic. I am *really* looking forward to the unlocked CDMA version. My r800x is thirsty Looks great man!
Click to expand...
Click to collapse
If you want to try ICS now, paxChristos's CDMA CM9 runs AMAZING on this device. The only issue is some game compatibility, and a bit lower battery life
Leraeniesh said:
If you want to try ICS now, paxChristos's CDMA CM9 runs AMAZING on this device. The only issue is some game compatibility, and a bit lower battery life
Click to expand...
Click to collapse
Agreed. I am current running it as a matter of fact. The one quirk I hate is the fact that the analog controls do not work correctly here in Pew Pew 2 Not pax's fault, but apparently an issue with the controls in CM9. Question is, can it be fixed? (Along with the Pac Man issue of course)
I rooted my phone and installed the latest CM10 Rom from this XDA thread -- http://forum.xda-developers.com/showthread.php?t=1851912
However, although everything else seems to work just fine, such as Bluetooth, camera, etc., my GPS does not lock.
I've tried searching the forms here but I can't find a definite answer on how to get my GPS to lock.
When I used to have the the HTC EVO 4G, I had to do some ###GPS... stuff in a Sense ROM and then use that to get the GPS to lock when I installed CM7 but I found a few people who tried that and it didn't work.
Also, when I first tried installing the CM10 Rom, I got stuck with the CM10 boot animation so I followed the following instructions and finally got it to work:
Extract the boot.img from the CM9 ROM zip, and flash it through fastboot ("fastboot flash boot boot.img"), and then flash the ROM through recovery (or you can do that in the reverse order, and it should still work).
I think knowing that may also help.
Anyways, bottom line is, how can I get my GPS to lock in CM10.
I have TWRP installed.
That's not the newest build. Get the newest nightly here: http://get.cm/?device=jewel
Try flashing that and see if it helps your GPS issue.
And if you have HBOOT 1.15 or newer and have to flash the kernel (boot.img) separately in fastboot, make sure it's the one that comes in the new CM10 ROM zip you download from the above link.
Alternatively you can download GPS Tools from the market, it will erase location data cache and reset GPS, pretty nifty tool
I don't know if it will help or not, but some folks have been having luck with this process:
Do a clean install of CM10, wipe system, cache, dalvik, and do a factory reset, or flash the super wipe script that is available(do a search)
reboot phone after install see if GPS locks.
if not, reboot into recovery, and do a nandroid backup of your phone.
wipe phone again and do a clean install of a Sense ROM.
Boot into Sense Rom and get a GPS lock
immediately boot into recovery
this step is optional, but you can do a nandroid of your sense Rom at this point in case you need to go back.
Restore your CM10 nandroid and try to get a GPS lock.
Hopefully Profit!
Thanks for all the suggestions.
I tried all the suggestions but the one that temporarily worked for me was where you flashed a Sense ROM, got a GPS lock, went into Boot and flashed CM10. Unfortunately, this only works while you don't restarted your phone. It was working for me on CM10 but then I tested to see if GPS will lock after a restart and it didnt.
I'm just going to use FreshEVO until an official CM10 build is out and whenever this issue is addressed on a more official level.
Thanks again for all the help!
filmihero said:
I'm just going to use FreshEVO until an official CM10 build is out and whenever this issue is addressed on a more official level.
Click to expand...
Click to collapse
Official CM10 builds have been out for over a week. Hopefully you followed my suggestion and downloaded one from the link I provided. The one you said you used is an earlier unofficial build.
Hope everything works out for you.
bilbo524 said:
Official CM10 builds have been out for over a week. Hopefully you followed my suggestion and downloaded one from the link I provided. The one you said you used is an earlier unofficial build.
Hope everything works out for you.
Click to expand...
Click to collapse
Yup, I downloaded the lasted CM10 ROM and then followed the other two suggestions but the GPS locked during one session after going through a Sense ROM. But, like I said, once I restarted my phone, I lost the locking. I'll just wait until something more solid comes out.
Thanks again for all the help!
Chiming in that GPS still doesn't work in latest cm10.
Really frustrating, cm10 is still far from a daily driver. Any other GPS fixes to try before I go back to MeanRom?
Sent from my EVO using xda app-developers app
thats odd everything seems to work for me on the latest cm10 for the most part except there is no camera app. Does anyone know where i can get it from
Its suggested to use decks builds and not the official ones. Decks Irc builds will always have the latest fixes
Sent from my EVO using Tapatalk 2
Rxpert said:
Its suggested to use decks builds and not the official ones. Decks Irc builds will always have the latest fixes
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I tried the latest nightly available in the cm10 thread and GPS still doesn't work.
Are the IRC builds even newer than the nightlies? Not having GPS is a dealbreaker for me and I'm unfortunately back on MeanRom until CM10 has working GPS.
Have you tried the clrgps trick? I don't remember the exact code but its floating around the forums, flash back to sense use this to clear and reset the GPA and then open maps to get a location fix, then flash back. Alternatively you can try downloading GPS Tools from the market to clear and reset gps
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
Wait I've already mentioned this lol...sorry
om4 said:
Have you tried the clrgps trick? I don't remember the exact code but its floating around the forums, flash back to sense use this to clear and reset the GPA and then open maps to get a location fix, then flash back. Alternatively you can try downloading GPS Tools from the market to clear and reset gps
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
Wait I've already mentioned this lol...sorry
Click to expand...
Click to collapse
I tried downloading GPS Tools from the Play store and reset the GPS data and got a fix under MeanRom, then flashed back to CM10 and no GPS at all.
GPS locks nearly instantly under MeanRom, but under CM10 I let it sit out on my car dash for a 30 minute ride and it didn't lock on at all.
Here is the fix that worked for me. Flash to a Sense ROM, download GPS tools. Clear GPS data and then download GPS data. Make a Titanium backup of GPS Tools.
Flash back to your CM10 ROM, restore GPS tools through Titanium.
Never thought of that....clever
In location settings of cm10, you have to them on the internal GPS source. After flash it is set to external GPS source (Bluetooth device, etc.) After I switched this option, and did the sense trick, my GPS locks in seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVO using Xparent Blue Tapatalk 2
Gps works fine.... Data and mms too.
Sent from my Cm10 powered Evo Lte!!
kaos420 said:
Gps works fine.... Data and mms too.
Sent from my Cm10 powered Evo Lte!!
Click to expand...
Click to collapse
Oh, must've been my imagination then.
wrxlvr said:
Here is the fix that worked for me. Flash to a Sense ROM, download GPS tools. Clear GPS data and then download GPS data. Make a Titanium backup of GPS Tools.
Flash back to your CM10 ROM, restore GPS tools through Titanium.
Click to expand...
Click to collapse
Where can I find this "GPS Tools" on the market? Whenever I search for that, I just get a bunch of GPS test crap. Is it not called GPS Tools? Also, can you explain the backup process using TB in more detail?
https://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2
Basically the same thing as GPS Tools, I wonder what happened to GPS Tools, it was really simple to use
Okay some of you might know that even with knox triggered you can still flash a custom rom and it will work great and you can go back to the stock rom with knox triggered of course by doing a backup of the rom before flashing a custom rom.
I have flashed every custom rom that @Silesh.Nair has for download for the mega 6.3 and they all flashed and device booted up without any problems, i did not test every feature in each rom but i just tested wifi and camera mostly and they have worked like they should.
So any member with the i527m version of the mega can flash any one of the roms that are for download by @Silesh.Nair which you can get from his link in his signature of his post..below are all the custom roms i tried..just the info screens only.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And if you notice were it says SElinux status it says it is permissive instead of it saying enforcing like when you are on the stock rom with knox. Hope this will help some of you out and at least you can try a custom rom if you like, i use TWRP recovery 2.6.3.0 for all the installing of these roms and my backups of my stock rom.
I will put up the pic for the lego rom shortly as i could not find the pic for it at this time...lego rom pic is now included. :good:
Awesome post. Save a lot of time to find out which one works and which one doesn't.:good:
I personally have tried CM11 and Beanstalk.I like both of them but stick to CM11.I also tried Slimkit bit it went into a boot loop for some reason..
For both CM11 and Beanstalk, they both display phone model as GT-i9205; but I manage to change it back to SGH-i527M from property build file.
Also, the notification light don't seem to work on my phone even though I have enabled them, could be a hardware problem in my phone. But so far, the phone runs very smooth. No complain at all.
.
.
Hi SM, are there any custom ROMS that use the Mega's illuminated touch keys near the bottom of the phone (instead of the standard Android touch keys)?
EyeBalos said:
Hi SM, are there any custom ROMS that use the Mega's illuminated touch keys near the bottom of the phone (instead of the standard Android touch keys)?
Click to expand...
Click to collapse
Not quite sure what you mean..but if you mean the touch keys that light up on the right and left side of the home button on the phone then all the custom roms i tried these illuminated touch keys work for each custom rom.
starmaster10 said:
Not quite sure what you mean..but if you mean the touch keys that light up on the right and left side of the home button on the phone then all the custom roms i tried these illuminated touch keys work for each custom rom.
Click to expand...
Click to collapse
Yes, you understood what I meant.
OK, so earlier I tried to flash Resurrection Remix using TWRP and it failed! I rebooted the phone but it would not start up. So I rebooted into recovery and restored the nandroid backup. Now the phone is back to stock brand-new-in-box state except for TWRP being the recovery program.
The stock ROM of my phone says Android V4.2.2. I recall reading that the RR rom required V4.4.2 or higher. Is this the reason why the flash failed?
So now I'm thinking of flashing the latest CM11 from Silesh Nair. Would this be easier to flash from stock ROM? Also, do I need to install SuperSU on the stock ROM before I proceed to flash CM11?
Thanks again!
EyeBalos said:
Yes, you understood what I meant.
OK, so earlier I tried to flash Resurrection Remix using TWRP and it failed! I rebooted the phone but it would not start up. So I rebooted into recovery and restored the nandroid backup. Now the phone is back to stock brand-new-in-box state except for TWRP being the recovery program.
The stock ROM of my phone says Android V4.2.2. I recall reading that the RR rom required V4.4.2 or higher. Is this the reason why the flash failed?
So now I'm thinking of flashing the latest CM11 from Silesh Nair. Would this be easier to flash from stock ROM? Also, do I need to install SuperSU on the stock ROM before I proceed to flash CM11?
Thanks again!
Click to expand...
Click to collapse
Try the newest TWRP recovery from @Silesh.Nair download server here and go into recoveries folder and then the TWRP folder and download the 2.7.0.5 zip file as these recoveries have kitkat support and put it to your internal or external sd card if you have a external one and flash it with the TWRP recovery you have in your phone and re-try that RR rom as it should flash it, as TWRP will also root the phone for you if it detects that your phone has not have it..and if you like to try CM11 you can also.
If you need the SuperSU v1.93 in a zip file which you can also flash with TWRP and just put it into your sd card of your phone also..and you can download it here UPDATE-SuperSU-v1.93.zip and after flashing the newest TWRP recovery you can flash this afterwards to ensure you are rooted.
OK,I flashed TWRP 2.7.0.5 and then CM11 successfully. Phone booted up fine. I just noticed that I'm not getting LTE signal like I did on stock ROM, I'm only getting 3G. The phone is locked to Rogers. Does CM11 support LTE? Any other custom ROMs for the i527M that support LTE?
Also, if I want to try the RR ROM, do I need RR-specific gapps or can I use the CM gapps?
Thanks again!
EyeBalos said:
OK,I flashed TWRP 2.7.0.5 and then CM11 successfully. Phone booted up fine. I just noticed that I'm not getting LTE signal like I did on stock ROM, I'm only getting 3G. The phone is locked to Rogers. Does CM11 support LTE? Any other custom ROMs for the i527M that support LTE?
Also, if I want to try the RR ROM, do I need RR-specific gapps or can I use the CM gapps?
Thanks again!
Click to expand...
Click to collapse
I flashed both CM11 and RR custom roms on my i527m mega and it shows 4g well it shows LTE on the my phone which is the 4g in my area as my wife's phone shows 4g instead of LTE...so it should work..i see you have the i527m model and did you flash the right rom as one will show melius3gxx and one will show meliusltexx in the title of the rom and you will need the meliusltexx one to have 4g working.
And with the gapps check out @Silesh.Nair post here and in his signature you will see GApps with 4 links to them..most members use the BaNkS gapps for custom roms as these gapps will have 4.4 kitkat support which all the gapps in his signature have. :good:
I did flash the LTE version - CM11-20140602-UNOFFICIAL-meliusltexx.zip. I also flashed UPDATE-SuperSU-v1.93.zip from TWRP.
Although my phone is locked to Rogers, my carrier is actually Fido and the Fido LTE SIM card works with Rogers without unlocking. As I mentioned, I had LTE on the stock ROM prior to flashing CM11.
Any other suggestions to try?
Hi SM, still trying to figure out this LTE problem. When I flashed CM11 and RR using TWRP, I only did the factory reset option. Should I try again using the advanced wipe options? If yes, which partitions should I use?
Thanks again.
EyeBalos said:
Hi SM, still trying to figure out this LTE problem. When I flashed CM11 and RR using TWRP, I only did the factory reset option. Should I try again using the advanced wipe options? If yes, which partitions should I use?
Thanks again.
Click to expand...
Click to collapse
Well I installed CM11 again and lte was working and I checked around in the ron but could not find anything on a setting for the bands.
In TWRP use advance wipe and check the first 4 boxes Dalvik cache, Cache, Systen and Data and try reflashing the CM11 rom and see if kte will show up.
Sent from my SGH-I527M using XDA Free mobile app
OK, I just did the advanced option to wipe dalvik, cache, system and data. Then reflashed CM11 - still doesn't get LTE. Also the carrier says Rogers Wireless instead of Fido on the lock screen.
Do I need to change the APNs? After reflashing, there are 4 APNs created including:
Fido FTE = ltemobile.apn
It's weird that it would create a Fido APN yet display "Rogers Wireless" as the service on the lock screen.
@starmaster10: I see you have tried so many custom ROMs on this biggie phone! Which one of all these do you finally prefer? OR maybe just stock Samsung itself?
Well, to be honest, all these non-functioning this and that on custom ROMs (LTE, WiFi, touch, etc.) has scared me to take the risk of custom ROMming! I just wish by now, a non-invasive rooting method existed for Mega 6.3" with KitKat. Man, on other phones, it's just so easy and no-brainer to root but with Mega! Naah.
Mega is a production phone for me, all I wanted was to root it (I don't want custom recovery) that doesn't screw Knox!
Well the two custom roms I liked the best was resurrection and the dirty unicorn rom as those roms had some nice features in them..but I am on the 4.2.2 jellybean right now for a while already..I will most likely install the kitkat 4.4.2 NE5 rom in a while and at least I can still install some custom roms down the road..and knox is triggered on my phone due to rooting and installing a custom recovery TWRP 2.6.3.0..as it is good to have backups in case something goes haywire.
Sent from my SGH-I527M using XDA Free mobile app
Hi,
I want to install a custom rom for a friend that has an unlocked SGH-i527m. I wanted to ask several questions:
1. Which ROM is both fast and stable with minimum numbers of bugs!? I think KitKats are fine. I need something that doesn't give my friend a headache.
2. The latest download link provided by Silesh.Nair is for InvictaOS-7.1.2-20170704-athene-v4.0.zip ... Android 7.1.2... Is it stable?
3. Is it possible to install any ROM that is in the i9205 section? What other i9XXX can I install on this device?
4. Do I have to look for a certain recovery for each ROM? Or can I use the latest recovery available? I have seen some devices that there is a specific recovery for each ROM.
Thank you in advance.
My Model is a SGH-I527M.
Baseband version. I527MVLUCNE6.
Can anyone tell me which phone this Mega1 ? Mega2 6..3 or what????
kb5rir said:
My Model is a SGH-I527M.
Baseband version. I527MVLUCNE6.
Can anyone tell me which phone this Mega1 ? Mega2 6..3 or what????
Click to expand...
Click to collapse
original mega i.e the 6.3 inch version (M is the Canadian Rogers version)
hrkh83 said:
Hi,
I want to install a custom rom for a friend that has an unlocked SGH-i527m. I wanted to ask several questions:
1. Which ROM is both fast and stable with minimum numbers of bugs!? I think KitKats are fine. I need something that doesn't give my friend a headache.
2. The latest download link provided by Silesh.Nair is for InvictaOS-7.1.2-20170704-athene-v4.0.zip ... Android 7.1.2... Is it stable?
3. Is it possible to install any ROM that is in the i9205 section? What other i9XXX can I install on this device?
4. Do I have to look for a certain recovery for each ROM? Or can I use the latest recovery available? I have seen some devices that there is a specific recovery for each ROM.
Thank you in advance.
Click to expand...
Click to collapse
athena is not the mega....apparently the person has various roms for various devices
melius is the mega
RR-N-v5.8.5-20171211-meliusltexx-official.zip
recovery is here
https://dl.twrp.me/melius/
ZVC-Lollipop!
Brought to you by
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See post #2 and #3 for extras
This is BONE STOCK. It only has root
Included in ROM
ROM
KERNEL
MODEM
ZVC rpm, tz partitions
Install instructions:
1. Flash this in TWRP - MAKE SURE YOU CLEAN FLASH THIS!
In TWRP, select Wipe>Advanced>then select cache, dalvic, data,and system. DO NOT select int or ext SD.
2. Flash Rom
3. Profit!
After install:
Go to Settings>System Updates> and update profile/prl. You can also go to "Activate this device".
If you do not have Sprint bootani or Wifi Calling
You will need your MSL number and do the dialer reset. So in the Dialer ##786#. This will wipe your int SD!! And everthing else, so you will be starting fresh.
Bugs:
None that I know of.
Downloads:
Stock_L_ZVC_Odexed
XDA:DevDB Information
Stock_ZVC_L_Odexed, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2015-11-23
Created 2015-11-24
Last Updated 2015-11-23
Extra files
These files ARE included in the ROM. I just put them here in case.
ZVC-rpm, tz partitions
ZVC_Stock_Kernel
ZVC_Modem
Extra files
ZV4/6_rpm, tz_partitions - in case the rom won't boot. Or for other random issues
SD-Card-fix
More later
Info and stuffs
This might be a minor update, but there are quite a few changes as far as reception things go.
I've flashed this 4 times and it installs differently each time. So MAKE A BACKUP FIRST!!!!
After Flashtool from ZV4, I had to do a battery pull when it was trying to boot up. But then it booted right up.
I need to run this for a few days before I do any changes for BARE?????
More later
Thanks for the quick update! Unfortunately for me I am stuck at the LG logo though. Any ideas? (Did clean wipe twice as well as a few battery pulls)
ssmercurys said:
Thanks for the quick update! Unfortunately for me I am stuck at the LG logo though. Any ideas? (Did clean wipe twice as well as a few battery pulls)
Click to expand...
Click to collapse
What bootloader are you on? You need to be using ZV4 bootloader.
Also check the md5sum.
Let it sit for a couple minutes when on the logo. It seems to take it's sweet time.
engine95 said:
What bootloader are you on? You need to be using ZV4 bootloader.
Also check the md5sum.
Let it sit for a couple minutes when on the logo. It seems to take it's sweet time.
Click to expand...
Click to collapse
Not sure on bootloader, I would assume ZV4 as I had that originally when I got the phone *and have since just flashed updates from here* I can check if there is a way?
I did check the md5sum, that matched. I am guessing the above?
ssmercurys said:
Not sure on bootloader, I would assume ZV4 as I had that originally when I got the phone *and have since just flashed updates from here* I can check if there is a way?
I did check the md5sum, that matched. I am guessing the above?
Click to expand...
Click to collapse
Your on ZV4 if you haven't rooted ZVA, B, or C. Try flashing it again and give it a couple minutes at the logo. It should then go to the updating android thingy.
I kinda wondered if this one would give us issues. It just didn't feel right when I was working on it. But it runs just fine when installed. And I've installed it 4 times.
If that doesn't work, try flashing the ZV4 rpm, tz partitions and ZVB modem, after flashing the rom. And before booting it up. Maybe?
If there are others that have issues, then I'll need to re-work it.
Edit. @ssmercurys OK, I'm pretty sure, at least in your case, its the rpm,tz partitions.
So flash the ROM, then flash the zv4 rpm,tz partitions, then reboot.
You can find them in post #2 or #3 of almost all of my roms. I'll get them here too.
engine95 said:
Edit. @ssmercurys OK, I'm pretty sure, at least in your case, its the rpm,tz partitions.
So flash the ROM, then flash the zv4 rpm,tz partitions, then reboot.
You can find them in post #2 or #3 of almost all of my roms. I'll get them here too.
Click to expand...
Click to collapse
I have them already as I've had issues with that on every new ROM base. Let me give that a shot here quick and i'll report back.
*Edit, no go. I'll give the ZV4 tot a try tomorrow and flash after.
ssmercurys said:
I have them already as I've had issues with that on every new ROM base. Let me give that a shot here quick and i'll report back.
*Edit, no go. I'll give the ZV4 tot a try tomorrow and flash after.
Click to expand...
Click to collapse
You shouldn't need to use flashtool. Unless you want to. I did it just to clean things up before updating.
Try putting the rom on internal sd and remove your ext sd. Then flash it. Your ext sd might be causing issues also. It's just another easier option than flashtool. And it helps rule that out. Or as the culprit.
I'm in the same boat as ssmercurys. Stuck at the animated LG logo, I tried flashing the ZV4 zip file you mentioned and it did not help.
PedroDaGr8 said:
I'm in the same boat as ssmercurys. Stuck at the animated LG logo, I tried flashing the ZV4 zip file you mentioned and it did not help.
Click to expand...
Click to collapse
Read all of page one and see if any of that helps.
There's been 25 dl's, and only 2 of you having issues so far. Even if only half are installed it's got to be something with your phones causing the issues.
Install without ext sd card.
Flash the zv4 rpm, tz partitions in post #2.
Make sure to give it a couple minutes at the LG logo. It's kinda slow on first boot sometimes.
Clean install. So wipe /system, /cache, /dalvic, and /DATA.
engine95 said:
Read all of page one and see if any of that helps.
There's been 25 dl's, and only 2 of you having issues so far. Even if only half are installed it's got to be something with your phones causing the issues.
Install without ext sd card.
Flash the zv4 rpm, tz partitions in post #2.
Make sure to give it a couple minutes at the LG logo. It's kinda slow on first boot sometimes.
Clean install. So wipe /system, /cache, /dalvic, and /DATA.
Click to expand...
Click to collapse
Tried that this morning. No go. Still gets stuck at the LG animated logo.
Just wanted to report that i flashed the Fulmrics rom this morning, it flashed but no sim, no data. So i flashed this & everything went fine, booted right up, setting it up, almost done & haven't even had a fc. Wow though, i haven't seen this much bloat for years lol. I know its totally stock, but. Hey, question, now that I've flashed this the modem will stick correct? I mean if i were to flash an aosp rom later I'd have this modem still until i flashed say zvb modem yeah? Thank you for this!
Sent from my LGLS990 using Tapatalk
aheeejd said:
Just wanted to report that i flashed the Fulmrics rom this morning, it flashed but no sim, no data. So i flashed this & everything went fine, booted right up, setting it up, almost done & haven't even had a fc. Wow though, i haven't seen this much bloat for years lol. I know its totally stock, but. Hey, question, now that I've flashed this the modem will stick correct? I mean if i were to flash an aosp rom later I'd have this modem still until i flashed say zvb modem yeah? Thank you for this!
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
It'll stick and so do the rpm, tz partitions.
But be careful with the international roms. Some of them include modems and other partitions. Easily fixed with a flash though.
Ok thanks for the info. I know this is $hitty of me to ask here, but what the heck I'll give it a go, I flashed your zvb last week & tried getting xposed to work & could not get it. I think maybe installed wrong one, can someone direct me to the exact one needed, that would be much appreciated
Edit - I saw somewhere that the roms need to be deodexed, maybe thats why not workinh
Sent from my LGLS990 using Tapatalk
aheeejd said:
Just wanted to report that i flashed the Fulmrics rom this morning, it flashed but no sim, no data. So i flashed this & everything went fine, booted right up, setting it up, almost done & haven't even had a fc. Wow though, i haven't seen this much bloat for years lol. I know its totally stock, but. Hey, question, now that I've flashed this the modem will stick correct? I mean if i were to flash an aosp rom later I'd have this modem still until i flashed say zvb modem yeah? Thank you for this!
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
So you got this ROM to boot? @engine95 I just did a full ZV4 tot restore to stock/re-root and this still sticks for me at the LG animated logo. I think I have ruled out it is not my configuration, rolling back to ZVB works just fine.
**Update for you - So I clean flashed ZVB after the ZVC failed after TOT/root. After ZVB settled in, I left it as is with no changes and dirty flashed ZVC over it, it is now doing the "Android is upgrading" Hope this helps, if you need anything from me let me know.
I'm on stock rooted ZVB. Is it possible to dirty flash this? Just don't really feel like having to reinstall everything. I bought my phone with 4.4.2 and OTA'd to ZVB then rooted
Can anybody tell me what are the changes in UI? Is it worth updating
drsparsh said:
Can anybody tell me what are the changes in UI? Is it worth updating
Click to expand...
Click to collapse
Check out screen below. So far I've noticed they changed the Wi-Fi icon and the LTE (Spark) Icon. The LTE icon now looks like AOSP and doesn't take up half your bar.
View attachment 3554073
ssmercurys said:
Check out screen below. So far I've noticed they changed the Wi-Fi icon and the LTE (Spark) Icon. The LTE icon now looks like AOSP and doesn't take up half your bar.
View attachment 3554073
Click to expand...
Click to collapse
How the heck did you get the clock in status bar not to show up, that thing takes up half the bar lol