Guys,
I'm giving a link to the Elijah Phantom U9 firmware (Allwiner A10, 9,7'). Code name is T05A, and crane_evb-eng 4.0.3. IML74K 20120322 test-keys
I'm posting this link, since this firmware is nowhere to be found on the internet. I got it from the producer of the tablet, since I bricked mine.
http://depositfiles.com/files/e482b1ugw
I'm not going to go in detail how to reflash your firmware, since there are many already on the internet. I used LiveSuit 1.07 for mine. The procedure is after telling LiveSuit what options you want & where is the firmware, on a switched off tablet to hold down what appears to be the Volume down key and then put the USB cable in. The reflashing process takes a minute or two.
Hero
Thanks for sharing, will try it tomorrow.
Also got a bricked tablet while I had the same signatures like T05A and someting with crane.
Googled it and my tablet looks exactly like: Elijah Phantom U9
No good custom roms around?
And is there a way to get CWM installed?
Anyone with knowledge about this?
Assistance?
My modelnumber is now: MID970
Android 4.0.3
Smalband version: 0.9
Kernel: 3.0.8+ [email protected]
Not as you described, did I do anything wrong? (It's older then the T05A with smalband 1.0 and a kernel with crane_evb-eng 4.0.3. IML74K 20120322 test-keys)
P.s. I also found Visture V3 (Exactly the same looking tablet.)
P.p.s. This software is from Eken A90.
Related
Hey everyone,
so i've rooted my phone once before, and after some time i decided it was time to install chainfire's rom due to my battery drainage.
so i went on over to chainfire's thread and read... and read.... and read... downloaded all the jizz. and eventually i got down to the odin part. it was hanging at a specific step. anyways i read... again and realised that my firmware supported a very old recovery tool that didnt work so great. so i got back down to the site and read some more, and eventually got down to installing a new firmware (still confused with firmware vs kernel... but anyway)...
i went down to sammobile. and voila got a 4.0.3 firmware nice! but then... root was gone, and like my rooted apps that installed requested it needs to be rooted first. so i was like (EFFFFFF) anyway.
so i began searching again on how to root, and yes i know i need an insecure kernel... but where on earth do i find this thing.
i noticed that on sammobile they have kernels (or is it firmware, jeez all these names )... and i noticed that some of them have hash signs (##) next to them, does that mean it's insecure? i read somewhere that the star (*) sign means incomplete (it's an update rather)...
so please, someone, anyone, please help...
all i wanna do is install chainfire's rom
DEVICE: Samsung Galaxy S II
MODEL: GT-I9100
ANDROID VERSION: 4.0.3
BASEBAND VERSION: I9100DXLP7
KERNEL VERSION: [email protected] #3
BUILD NUMBER: IML74.DXLP7
thanks in advance guys...
Just download and flash via odin the cf root kernel for LPQ which is compatible with LP7 (use the latest version 5.4 referred to as proper it is a bug fix version). This will give you root and cwm.
Sent from my GT-I9100 using Tapatalk
Pending
Thanks so much, ima get on it a lil later today and post back results.
You're a star.
Original (samsung) DXLP7
marcadam said:
Just download and flash via odin the cf root kernel for LPQ which is compatible with LP7 (use the latest version 5.4 referred to as proper it is a bug fix version). This will give you root and cwm.
Click to expand...
Click to collapse
Hi, this kinda what I'm looking for, so would you or any other kind soul explain or provide some links so that I can root my I9100 with ORIGINAL DXLP7.
Thanks.
Edit (extra info):
DEVICE: Samsung Galaxy S II
MODEL: GT-I9100
ANDROID VERSION: 4.0.3
BASEBAND VERSION: I9100DXLP7
KERNEL VERSION: [email protected] #3
BUILD NUMBER: IML74K.DXLP7
Downloaded the official DXLP7 firmwire from intratech's thread.
SUCCESS!
Worked Perfectly! WOW! Took less than 5 minutes aswell...
Thanks so much ChainFire!
But MOST of ALL, thanks marcadam for your quick response and help!
Root lives on.
P.S.
Sadly i coudln't post the external links for the CF-Root, HOWEVER go on to Google Plus and search "ChainFire". All his links are in his posts.
Hi,
The problem i'm having is every few days my radio will spam the phone asking for root. I have to press accept about 10 times before it goes away (even remembering the selection) only for it to re-appear a few days later asking again. I've tried a different modem and the situation seems to have improved but it's not gone completely (it used to spam over 100 entries at a time).
The rom i'm using is a recent cyanogen JB nightly, and I believe the siyah kernel.
Has anyone else had this issue? Surely the radio shouldn't be asking for root at all, since normal phones don't have that access.
I'm on Vodafone UK. I'm not sure I have the right rom's / radio / kernal so I'll post down what the phone lists here:
Baseband: I9300XXDLID
Kernel Version: 3.0.31-CM-g9ee66ec [email protected] #1
Nightly version: 10-20121202-NIGHTLY-I9300
Build number: cm_i9300-userdebug 4.1.2 JZO54K eng..20121202.091641 test-keys
Does anything look majorly wrong with this?
Thanks,
I've had the same issue the other week on a cm10 nightly.. I've researched it a bit but just put it down to an error of some kind. Would like to know why?
Hi Guys,
I have Milagrow 7.16c tablet with
Model Number MGPT09
Android ICS version 4.0.4,
BaseBand Version MW100G_Base_V300R20
Kernel version 3.0.8 [email protected] #50
Build Number MGPT09 20121008
when i try to use the encrypt tablet, it goes to the black screen with Android Logo doing nothing for hours.
Is there any file missing in Android OS thats causing this.
I have searched a lot about the issue, but not getting any resolution.
Any help would be appreciated.
Also can someone tell me a similar ROM for the above, so that i can try to root it with a new rom? its a 3G calling tablet.
arianguy said:
Hi Guys,
I have Milagrow 7.16c tablet with
Model Number MGPT09
Android ICS version 4.0.4,
BaseBand Version MW100G_Base_V300R20
Kernel version 3.0.8 [email protected] #50
Build Number MGPT09 20121008
when i try to use the encrypt tablet, it goes to the black screen with Android Logo doing nothing for hours.
Is there any file missing in Android OS thats causing this.
I have searched a lot about the issue, but not getting any resolution.
Any help would be appreciated.
Also can someone tell me a similar ROM for the above, so that i can try to root it with a new rom? its a 3G calling tablet.
Click to expand...
Click to collapse
And did U find a new ROM ??????
I have this device: 10" ANDROID 4.0 ALL WINNER A10
Was purchased ebay item here: ebay.com/itm/350682026549
SpecDevice: specdevice.com/showspec.php?id=9fbe-947d-fe11-503e0033c587
After my "playing" with root+SU+busybox, etc. I killed it.
Tried to restore it with different IMGs with PhoenixCard. Successed with (crane_bc1077-eng 4.0.4 IMM76D 201211217 test-keys), but G-sensor does not working (mma7660).
Original IMG was (crane_bc1077-eng 4.0.4 IMM76D 20121030 test-keys), but I can't to find it.
How to restore G-sensor or find original IMG file?
Thanks.
I have a generic chinese tablet.
What I am trying to is find a better rom for it. I have spent a lot of time trying this without any success.
Here is what I do know it is a A7.
Kernel version
3.0.8-tcc [email protected] #131
Build number
full_m805_892x_evm-userdebug 4.0.3 eng.zxp.20121228.101433 test-keys
I have already mucked up one which comes up "unfortunately, Launcher has stopped".
The other one I flashed the rom but the touchscreen is not working.
The more I look for a answer the more confused I get. I understand enough to what needs to be done.
Just need to be put on the right track.