Hi, I need a stock odin ICS ROM (preferably 4.0.4) for my GS2 so that I can unbrick it. I was using [email protected] and when I installed Resurrection-remix_ics_V1.7_AOKP-Build34_4.0.4 over it all I got was the boot logo and then a black screen. When I start on recovery mode it will only allow me to install from an external source.
thanks in advance
if you are able to get Download mod,
pick the ICS roms from here and flash from ODIN
http://forum.xda-developers.com/showthread.php?t=1544487
there is no ODIN flashable 4.0.4 official ROM released.
YOu are not bricked, mount your sd card from CWM to pc, download some rom zips , copy it to your card and flash it from cwm.
Many thanks, ZaC!
Related
Tried rooting S2 then using Odin to update firmware to 2.3.4 but it failed. Now all I get is a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
Because I wasn't using Kies I haven't got a recovery code.
Is there an idiots guide to getting my phone to work? I'm a bit of a noob and have searched for solutions but can't find any.
Thanks in advance.
I don't think that's bricked. Just pull out the battery for 10 seconds and put it back.
Factory reset via recovery and install a stock rom via Odin.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Flash a kernel with CWM over odin, boot into CWM recovery, copy a custom rom to internal sd card and flash this using CWM
Kernel & instructions:
http://forum.xda-developers.com/showthread.php?p=14283342
[08.08.2011][CF-Root v4.1] KE2/7/8, KF1/2/3/4, KG1/2/3/5/6/7 - su+bb+CWM4
Rom:
chose your own, for example Leomar75 makes a good rom (original android development section)
.... from TI30 Mobile
No its not bricked.i dont see why you shouldnt have a recovery mode.You dont need to root to upgrade either.pull the battery and leave it out a while.when you swith your phone back on boot into download mode and reflash a stable firmware.
Thanks everyone, I panicked. All sorted now.
Hello,
first of all sorry for my english. I try me best but this is not my native language and i hope everyone can read this .
I have a strange Problem with my I9100 SG2.
I can flash a new FW with ODIN e.g. [ROM][ICS Firmwares] I9100XWLPX [29.08.2012][Android 4.0.4] and the Phone runs very well, but i cant flash anything else.
If flash the Siyah Kernel 4.1.5 with ODIN than i got stuck in a bootloop. I can enter recovery mode and do a wipe but this dont fix the bootloop.
If i try to flash anything else in the recovery mode the flash start and run till 40-70% and than it stops.
The only way to recover the SG2 is to flash a new stock FW like the I9100XWLPX and than i can start the phone and the bootloop is gone.
I have a lot experience with different androids devices and this is the first time where i don't have a solution.
Did someone have a Idear what i can try to flash a custom kernel or rom? What is going wrong?
Maybe i can fix it when i flash a 3-part FW with a PIT file.
kind regards,
Preacher
P.S.: I don't found any thread that can help me.
Did someone have a solution ?
many thx,
Preacher
Hy Preacher. So if i get it right this solves your problem:
Ok here is what to do
1) get into download mode and flash siyah kernel via Odin
2) download a rom.zip and put on ur external sd card using a card reader to connect it to ur pc
3) boot into siyah kernel's recovery mode and install zip from sdcard then install the rom u want
It is recommended to wipe data and cache via recovery ( but dont do it if u were on 4.0.4 or were trying to installing it).
Mantulis said:
Hy Preacher. So if i get it right this solves your problem:
Ok here is what to do
1) get into download mode and flash siyah kernel via Odin
2) download a rom.zip and put on ur external sd card using a card reader to connect it to ur pc
3) boot into siyah kernel's recovery mode and install zip from sdcard then install the rom u want
It is recommended to wipe data and cache via recovery ( but dont do it if u were on 4.0.4 or were trying to installing it).
Click to expand...
Click to collapse
I tryed this already but the install process stops in the middle of the progress bar.
Than i can only recover the Phone if i install a Stock ROM via Odin. I used a 4.0.4 an test the memory with a tool from the play store and the emmc brick toll told me that i dont have chip that is responsible for the brick bug.
What happens if the install hold between 40-70% and don't go any further.
many thx,
Preacher
Hhm ok then. We should go deeper. Please show me the errors you get. Try to install a rom via cm-recovery and try to attach logcat then it crash.
To save a log to a file,
adb logcat > logcat.txt
I have a Samsung Note that I tried to upgrade when the ICS update leak came out, and it changed the Baseband to I717UCLC5 (which is ICS) but the Kernel is still 2.3.6 (GB).
I've tried Odin, and it always fails, I've tried rooting, it fails, and I'm stuck on GB and want to update/root/anything.
I think I need to either flash the Baseband back to GB stock, or the Kernel up to 4.0.3? If so, does anyone have the download for the i717?
Thanks
Connect to Odin and try to flash clockwork recovery from stickied rooting thread.. If that succeeds then put your external SD into another device and download a custom ics kernel from dev section. Put the sd card back into the phone. Boot into recovery and flash the kernel zip. Your phone should now be able to start.
Right now you have a GB kernel on an ICS ROM. That's why it boot loops.
Sent from my SAMSUNG-SGH-I717 using xda premium
http://forum.xda-developers.com/showthread.php?t=1506330
Follow this to get back to stock gingerbread and reroot. After that be sure and update cwm or flash twrp and choose any of our phones fine ROMs or the official ICS to flash in your new recovery . Ur choice after u r up and going.
And with using Odin u should see a yellow box with numbers on the left of ur PC screen. If not u need to update the drivers for the note on ur PC.
Sent from the cheeziest phone in the south!!!
i've got a galaxy s2 , i was trying to install a custom rom (galaxy s2 I9100G ) and now its stuck on the galaxy s2 screen , i get get into cwm but i cannot mount it as usb storage or i cannot mount a sd card ! what do i do i need to send the .zip rom on to my internal memory , is there anyway i can transfer the .zip rom to my phone ?
Flash a new rom via odin from a pc (get to download mode voulme down+menu+power)
rickslick said:
Flash a new rom via odin from a pc (get to download mode voulme down+menu+power)
Click to expand...
Click to collapse
Flash a stock jelly bean ROM via Odin. Download from samfirmware.
Sent from my GT-I9100G using Tapatalk 2
My Quattro was previously running on cosmic Rom with philz recovery img but now I switched back to stock Rom but the bootloader is still show the build number different in the bootloader because of which software update download but doesn't install. Pls help me
Aditya78 said:
My Quattro was previously running on cosmic Rom with philz recovery img but now I switched back to stock Rom but the bootloader is still show the build number different in the bootloader because of which software update download but doesn't install. Pls help me
Click to expand...
Click to collapse
did you use odin for flashing stock? flash stock firmware
Yes I did switched to stock Rom through Odin and the phone is working but software update downloads but when the time comes for installation it goes into bootmode and says installation aborted. Could you pls tell me that if I am using a custom Rom that is installed by philz recovery "install zip from ext card " then how to switch back to stock Rom using Odin.
Aditya78 said:
Yes I did switched to stock Rom through Odin and the phone is working but software update downloads but when the time comes for installation it goes into bootmode and says installation aborted. Could you pls tell me that if I am using a custom Rom that is installed by philz recovery "install zip from ext card " then how to switch back to stock Rom using Odin.
Click to expand...
Click to collapse
Update via kies looks like update.zip was corrupted