Hi guys i need a small help pl .. i was trying to flash a rom but something went wrong .. It seems like the USB is not working ...
I tried to restore from the CWM backup .. it restored everything but in the end it said something about SD ext.img not found ... but everything is working fine except the USB ..
From CWM USB is not getting mounted, after i turn on the phone still usb is not getting mounted.. i don't knw wat to do guys pl help
EDIT :
Alright guys i seem to have solved the problem by just restarting the computer .. i don't knw what had gone wrong but restarting the computer fixed the issue .. Now am back to testing and flashing roms on my Neo V .. (Planning to buy an Iphone soon .. Android sucks to the core ! )
Which rom did you flash?
Via Tapatalk 2 on ICS
Connect USB data cable few times,until card is recognized,or change connection mode from MTP to MSC,because drivers must be installed again. I assume that CWM USB mounting not working because of the kernel. About SD ext.img not found,i get the same message,but there isn't any problem.
i tried that mate ... since morning i am inserting the cable again and again but it only charges the phone ..
Guys my USB is not getting detected ..I was trying to flash the FXP 117 rom (The stupid rom never works) on my neo V ! but i got a boot loop while doing that, so i flashed the night-elf kernel for ICS still it was a boot loop.. i had made a backup of my previous rom(Official ICS nordic rom) and i restored it .. while restoring i got a msg saying SD ext.img not restored(I dunno wat that means) ny ways my previous rom was restored.. I booted into the my Neo V and connected the USB cable .. BANG nw usb is not getting detected. But battery is charging ! Ok so i tried factory reset.. still the same prob.. Then i went into CWM and tried to mount from there ..nope its not getting mounted.. i dunno wat went wrong .. even the fastboot and flashtool is not working .. i am literally scrwed .. pl help me guys
Problem solved see OP
@livesourav Android sucks??lol
Just because you don't like it doesn't mean that suck.
Related
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
1. try changing USB cable.
2. redownload ROM, it may be corrupted.
yes but now i can't restart my xda. charges is on but don't wanna to start.and i hav ever try with usb cable.Wich rom do u think i hav to try if i can deblocked him ?
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
dune_973 said:
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
Click to expand...
Click to collapse
try downgrading first to original o2/MWG WM5 then flash to any cooked ROMs
i hav done a upgrade and after a hard reset my xda stay on 02 screen.nothing else
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
dune_973 said:
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
Click to expand...
Click to collapse
did you remove miniSD when you flashed via bootloader?
yes .same result.
I mind me something after read forum and wiki.my device is not locked and i should done a cid unlock or a hard spl ?
Cuz i hav download all rooms and each stop at 14% same in mini sd and each time i got the spash screen.
Someone can help me about this
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
kind to flash by boot loader ( ACTION+SOFT RESET ) by USB cable ,if you use
SD card it risk to brick atom.
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Easy get seus and reflash your phone stock or boot into recovery ,,, using charging phone power on phone unplug charger use a back up ,,if you can't start again rember to do back ups
saurabh12311 said:
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Click to expand...
Click to collapse
thanks again slade 87 ,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 ) ps3 (langtoes) ask my anything , I COULD KNOW THE ANSER OR I MIGHT NOT ,
still hanging in death rope
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Ooooooo you have a mini ,,,not pro ok you got the rong rom ok there is a hard reset. http://www.youtube.com/watch?v=2cvExle8S4o&feature=youtube_gdata_player
saurabh12311 said:
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Click to expand...
Click to collapse
,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 )
I DID ALL SUCH THINGS BUT NOTHING GO RIGHT 4 ME IS THERE ANY OTHER SOLUTION ,I READ ABOUT FLASHTOOL IN FORUM CAN U PLZ EXPLAIN IF BY THIS I CAN DO SOMTHING BUT PLZ EXPLAIN IN DETAIL
I had the same issue it restarts by itself n go into looping, remove the battery place it back, connect ur phone to SEUS by holding back button and plugging the USB
xperia mini10
in mini 10 battery is not removable & my basic operating files are deleted show when there is no operating file how it'll starts a home screen thats y i m asking u and other frend's is there any other method to re install operating 2.1 or any thing to start my phone again so i can do after that any thins otherwise nothing is worth 4 me saddddddddddddd
If your recovery (xrecovery or clockwordmod) works fine, what about removing your SD and plug it to a PC in order to copy a 2.1 ROM and then install it through recovery?
please ell me
plz tell me in which folder i'll put that files , basically allready tried all even my update zip is also there how to do and wht 2 do plz explain is there any method to recover from sdcard or through any other software
is there xrecovery file work from pc do u have exe file so plz sen me
[email protected]
is there any method to format c drive of phone bcs when ever i'm trying
through pc companion it'll tell in last stage to use usb storage but y phone is not starting so how could i do this nothing work 4 me plzzzzzzzzzzz any one give me solution I'm very depress my phone is even not going to switch off it'll starts again & again until battery drained
i deleted my three files from c/: x recovery.tar, con. & busy box
saurabh12311 said:
when ever i'm trying through pc companion it'll tell in last stage to use usb storage but y phone is not starting
Click to expand...
Click to collapse
That's weird because 7 hours after i brought my X10 mini pro i already bricked it , so i fire up SE PC companion and i followed the instruction to _repair_ the phone and no access to USB storage was needed that i remember.
It simply downloads and flash to your phone.
Unfortunately i'm still a newbie so i suppose and i haven't all the right answers
Keep trying with SE repairing and good luck with that!
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
thanks dear but finally my phone is ded I sent my phone to customer center but after checking they told me no hope phone will not recoverd..........
half knowledge is always dangerous is true for me I lost my money
There is no way that seus could not fix your phone and even if it couldnt se has a duty to repair it free of charge in the first 12 months !
Sent from my U20i using XDA Premium App
SEUS wont fail!
galvic said:
SEUS wont fail!
Click to expand...
Click to collapse
Quote that and DON'T THROW IT AWAY. USE flashtool. I got mine bricked and that was a great solution.
If you still have it i'm gonna show you a guide to flashtool
hi guys, i bought a Galaxy S II GT-I9100G two weeks back and everything was running good and i updated the firmware through the official site to DZKJ2 (Android ver. 2.3.6) and now when i connect my phone to my pc via usb it shows unknown device and i dont see the usb mount option on the drop down notication menu .. and now i am in total mess .. can only transfer files via wifi .. someone help me out .. havnt rooted my phone as yet .. but first this needs to be fixed in order to root the phone i guess ... H E L P
jackson.james said:
hi guys, i bought a Galaxy S II GT-I9100G two weeks back and everything was running good and i updated the firmware through the official site to DZKJ2 (Android ver. 2.3.6) and now when i connect my phone to my pc via usb it shows unknown device and i dont see the usb mount option on the drop down notication menu .. and now i am in total mess .. can only transfer files via wifi .. someone help me out .. havnt rooted my phone as yet .. but first this needs to be fixed in order to root the phone i guess ... H E L P
Click to expand...
Click to collapse
the DZKJ2 has quite some bugs in it.. and as for now, i suggest u to use odin and reflash the stock rom DZKJ1.. use this if u dun have the stock rom http://www.multiupload.com/6L8BALT56F
thanks for the quick reply CustomKill
i have not rooted my phone as yet . So will Odin work if the phone is not rooted ?
And besides the computer is not detecting the device even. So will it work ?
jackson.james said:
i have not rooted my phone as yet . So will Odin work if the phone is not rooted ?
And besides the computer is not detecting the device even. So will it work ?
Click to expand...
Click to collapse
doesn't have to root your phone to use odin.. and put your phone in download mode then odin can detect the device
jackson.james said:
hi guys, i bought a Galaxy S II GT-I9100G two weeks back and everything was running good and i updated the firmware through the official site to DZKJ2 (Android ver. 2.3.6) and now when i connect my phone to my pc via usb it shows unknown device and i dont see the usb mount option on the drop down notication menu .. and now i am in total mess .. can only transfer files via wifi .. someone help me out .. havnt rooted my phone as yet .. but first this needs to be fixed in order to root the phone i guess ... H E L P
Click to expand...
Click to collapse
Reinstall your usb drivers on your computer (Kies) there not working properly, but first try to use another usb hub on your computer than the one u are using usualy
gee2012 said:
Reinstall your usb drivers on your computer (Kies) there not working properly
Click to expand...
Click to collapse
sorry but to tell u.. thats the firmware problem.. not the usb driver.. even u tried to install the driver again it will show as failed to install.. thats a personal experience for me..
CustomKill said:
sorry but to tell u.. thats the firmware problem.. not the usb driver.. even u tried to install the driver again it will show as failed to install.. thats a personal experience for me..
Click to expand...
Click to collapse
I don`t think firmware prevents a usb connection between pc and phone. It might not see the phone but there is a connection
gee2012 said:
I don`t think firmware prevents a usb connection between pc and phone. It might not see the phone but there is a connection
Click to expand...
Click to collapse
previously i had the same problem just after i update the firmware.. and i tried most of the solution include the one u said.. nothing works.. but then somehow, i found the solution to solve by flashing the previous version firmware
Oke, could be off course. But then how do you ever get an update?
gee2012 said:
Oke, could be off course. But then how do you ever get an update?
Click to expand...
Click to collapse
when i'm still at stock rom.. i used the manually search for update and it helps me to update my phone from 2.3.5 to 2.3.6 and thats where all the problem starts
usb
man i had the same problem with my sgs2 .. i cracked my head for a while, but i found some solution that worked for me.
go to Settings---->Applications---->Development----->Uncheck the Enable Debugging mode ...
hope it helps =]
I am sure there nothin wrong with the usb drive in my pc because i tried all the slots and i even went to my friends house to check , but still the same issue .. So it's the firmware update that's causing the error. And i wana know whether if i use odin and flash my phone back to 2.3.5 will i lose all the apps that r installed on the phone ?
Sent from my GT-I9100G using XDA App
jackson.james said:
I am sure there nothin wrong with the usb drive in my pc because i tried all the slots and i even went to my friends house to check , but still the same issue .. So it's the firmware update that's causing the error. And i wana know whether if i use odin and flash my phone back to 2.3.5 will i lose all the apps that r installed on the phone ?
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
nope.. u wont lose any apps
Thanks for the reply Customkill
Will it be a good idea to root the phone at the same time along with changing the firmware as you said ?
Sent from my GT-I9100G using XDA App
jackson.james said:
Thanks for the reply Customkill
Will it be a good idea to root the phone at the same time along with changing the firmware as you said ?
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
there's a way to root i9100G.. since normal i9100 ways doesn't works.. u can try to flash this kernel http://www.mediafire.com/?vudqw1fd711uov8.. by the same way u flash the stock rom.. and u get a CWM and root
The usb connectivity issue got fixed automatically .. Don't know how but today when i connected to the computer it automatically installed the drivers and i was good to go ..
Now that it got fixed i need to root my phone . And i only have experience rooting my earlier phone Xperia X8, could you tell me the steps i should follow to root and the files needed as well as where to get them . And as u see my phone is GT-I9100G so the files on the ordinary S2 won't work on mine .. And i am scared that i might brick my phone lol . So help me out here .. Ty
Sent from my GT-I9100G using XDA App
jackson.james said:
The usb connectivity issue got fixed automatically .. Don't know how but today when i connected to the computer it automatically installed the drivers and i was good to go ..
Now that it got fixed i need to root my phone . And i only have experience rooting my earlier phone Xperia X8, could you tell me the steps i should follow to root and the files needed as well as where to get them . And as u see my phone is GT-I9100G so the files on the ordinary S2 won't work on mine .. And i am scared that i might brick my phone lol . So help me out here .. Ty
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
actually there isn't really any proper root for i9100G.. but the post before is the easiest method already.. just flash the kernel using odin by ticking the PDA slot and put this GKernel http://www.mediafire.com/?vudqw1fd711uov8... after that your phone should boot itself.. after booting your phone will have CWM and superuser by that means its rooted..
I have a similar problem like this..... i am unable to connect my i9100g to pc via usb after i updated my software to XWLC2..... is there a way to correct this? my mobile is not rooted and i updated it through the Update Software feature in the mobile....
Ok lets start ,my problem start when i instaled 4.0.4 lq5 and did full wipe after that i cant run phone only galaxy s2 logo and download mode but recovery didnt work . Than i tryed "i9100_u1_02_20110310_emmc_EXT4-patched-standard.pit" but didnt worked ,and then i tried i9100_u1_02_20110310_emmc_EXT4-patched-ums-bricked+1048576-kB.pit and its worked my phone is worked but problem is my usb storage is 8G after that pit but isnt that problem but freazes when instaling some games on usb and app phone restart all the time when instaling bigest games or app.Than i tried some pits to try repearing this problem but phone is hardbricked twice no responding at all no usb jig no nothing black screen.Then i worked JTAG but after JTAG phone is not starting same problem i must put EXT4-patched-ums-bricked+1048576-kB this pit to boot phone...
Please help mee what to do whit phone is ther any solutions for that problem???????
vislavskid said:
Ok lets start ,my problem start when i instaled 4.0.4 lq5 and did full wipe after that i cant run phone only galaxy s2 logo and download mode but recovery didnt work . Than i tryed "i9100_u1_02_20110310_emmc_EXT4-patched-standard.pit" but didnt worked ,and then i tried i9100_u1_02_20110310_emmc_EXT4-patched-ums-bricked+1048576-kB.pit and its worked my phone is worked but problem is my usb storage is 8G after that pit but isnt that problem but freazes when instaling some games on usb and app phone restart all the time when instaling bigest games or app.Than i tried some pits to try repearing this problem but phone is hardbricked twice no responding at all no usb jig no nothing black screen.Then i worked JTAG but after JTAG phone is not starting same problem i must put EXT4-patched-ums-bricked+1048576-kB this pit to boot phone...
Please help mee what to do whit phone is ther any solutions for that problem???????
Click to expand...
Click to collapse
Sounds very bad.
If you are lucky, your phone is only "soft-bricked".
Have a look here => http://forum.xda-developers.com/showthread.php?t=1457458
If this doesn't work, it might be a "hard-brick".
Still on warranty?
Good luck !
It_ler said:
Sounds very bad.
If you are lucky, your phone is only "soft-bricked".
Have a look here => http://forum.xda-developers.com/showthread.php?t=1457458
If this doesn't work, it might be a "hard-brick".
Still on warranty?
Good luck !
Click to expand...
Click to collapse
No waranity ,but phone working but have freazes when instaling some bigest games or dsownloading larger files
vislavskid said:
No waranity ,but phone working but have freazes when instaling some bigest games or dsownloading larger files
Click to expand...
Click to collapse
odin failed when updating ( it suddenly shows fail )
which gave me a hard brick afterwards ! ( I cant make the combo , cant get into recovery menu )
Im wondering if i buy a usb Jig , can it actually works ?
cause I saw that many people is having issues with USB JIG and claims that it dosen't work
for I1900G
HELP NEEDEEEDDDD !!!!!
or should i surrender ?
Only way is JTAG.
If even that doesn't work,you can do nothng . :/
Sent from my GT-I9100 using xda premium
noobxkevin said:
odin failed when updating ( it suddenly shows fail )
which gave me a hard brick afterwards ! ( I cant make the combo , cant get into recovery menu )
Im wondering if i buy a usb Jig , can it actually works ?
cause I saw that many people is having issues with USB JIG and claims that it dosen't work
for I1900G
HELP NEEDEEEDDDD !!!!!
or should i surrender ?
Click to expand...
Click to collapse
providing half cooked info will lead u knowhere, post in detail which rom/kernel u tried to flash thro Odin, was the same really meant for I9100g or was it related to Some other model of s2 etc.
Sun90 said:
providing half cooked info will lead u knowhere, post in detail which rom/kernel u tried to flash thro Odin, was the same really meant for I9100g or was it related to Some other model of s2 etc.
Click to expand...
Click to collapse
well, i risk my friends phone to try and root, i installed the wrong the all-in-one zip which will root and replace recovery with CMW .
It made me a soft bricked , cannot be boot or stuck at boot logo. and the recovery wont work. i tried the solution made by others that using odin3 executive v1.0.0. i went into download mode and start the button on odin3. on the half way. the message stops. i've force to unplug it and see weather it works . but then nothing happen. i can't even boot up the phone .
anyway , when i tried to connect it to the pc . the driver logo popup but installation of driver failed .
I wonder if USB JIG could help me go into download mode again .
help :crying::crying:
If you can manage getting USB jig try it... And if you cant i better recommend you jtag...
Anyways what u were flashing via odin?
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]