my phone dead boot just in icture wth phone and pc but when i connect it with the zune tell me cant restore error de restauration c101002e
rida007 said:
my phone dead boot just in icture wth phone and pc but when i connect it with the zune tell me cant restore error de restauration c101002e
Click to expand...
Click to collapse
Have you tried this:
http://support.microsoft.com/kb/2530409
Have you made modifications to your phone, like flashing a custom ROM?
yes i tried but still the same error now i tried the another update by nokia care suite i downloaded the firmware by nav but after all that i press the up volume botton but the phone still no detected why zune still stuck in the same error
no answeer help here
Try to hard reset it. Turh phone off, press Volume Down, Camera and Power buttons. Hold all three buttons down until the phone vibrates then release power button and hold volume down and camera for a further five seconds.
was it this custom ROM?
http://forum.xda-developers.com/showthread.php?t=1665651
and if it was that ROM did you take heed of.....
lucifer3006 said:
Only for devices with Quallcomm bootloader!
I dunno when will version for DLOAD bootloader!
Before flashing this custom ROM you must flash this file to sdb3 partition (thx biktor_gj)
Click to expand...
Click to collapse
in either case what bootloader do you have on your device?
i tell u that my phone not booting stuck just in recovery screeen
Did u try to flashed by Nokia Care suite? Use Navifirm download your phone firmware (same RM), then flash it by Nokia Care Suite. Zune have nothing to do to flash rom.
Yes but you haven't said if you tried the custom rom or not
Sent from my HD2 using XDA Windows Phone 7 App
dazza9075 said:
Yes but you haven't said if you tried the custom rom or not
Sent from my HD2 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
i dont know because its a newer for me i get it like that from my freind just a gift
ghekua said:
Did u try to flashed by Nokia Care suite? Use Navifirm download your phone firmware (same RM), then flash it by Nokia Care Suite. Zune have nothing to do to flash rom.
Click to expand...
Click to collapse
itried that but the phone wont recognize with volume down or not
err that weird...
Can u try one more time?
1. Use Navifrim, search for Nokia 800 (RM-801) or Lumia 800 (RM-802 or RM-819) (depend on ur phone RM). Download the Tango 8773 version.
2. Copy the firmware u just downloaded to firmware folder of Nokia Care suite.
3. Run nokia care suite, run Product support tools.
3.1 On the top left corner choose NO CONNECTION, then go to file, choose open product RM-xxx (ur RM), then choose UPDATE LIST choose ur firmware.
3.2 On the bottom left corner choose PROGRAMMING, then choose RECOVERY, then press START.
4. Connect USB cable to laptop (leave the micro USB connect to nothing)
5. Turn off the phone, then hold VOLUME UP + connect the micro USB to ur handphone, wait till it install the driver then press RETRY.
Ur phone should flashing the firmware now. If it's not then send my condolences to your phone....
Thanks for ur replay but the problem that i hold volume up and the phone wont recognizze and for power off my phone my lumia stuck at recovery screen wont on or anything
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA
rida007 said:
Thanks for ur replay but the problem that i hold volume up and the phone wont recognizze and for power off my phone my lumia stuck at recovery screen wont on or anything
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA
Click to expand...
Click to collapse
Hi,
Remove the battery or wait to drain completely.
BR
Bph&co said:
Hi,
Remove the battery or wait to drain completely.
BR
Click to expand...
Click to collapse
how to join battery in lumia no way
rida007 said:
how to join battery in lumia no way
Click to expand...
Click to collapse
Try to force the reboot to OSBL:
When phone shows the picture with the phone & the PC, hold power button for 10 seconds, then hold Volume +, does it vibrate for a short time?
If it does, then you can flash with NSS / Nokia Care Suite.
If it doesn't and it reboots, you can only try to flash a FFU (with wp7 cab sender). If that still failed, you probably have a physical problem and should take it to repair.
Related
Hello!
I read for hours now, bot no luck
I flashed my x10a with flashtool with generic rom.
After flash, as the flashtool says, just turned off and on the phone.
But nothing happened(green led blink one and do a sort vibration, thats all..)
no logo, no sound nothing happens.
I tried to reflash again, but windows says: Cannot recognize the device
In the control panel device manager show "unknown device".
Because of this , cannot reflash with the tool, because it's waiting for the recognized device too..
when i press the back and connect the cable, the green lighting for a minute , and turns of..
Yes, i have the correct drivers(as you can see i flashed before).
Help me guyz, please, if U can
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Try flashing back to stock non root. It may suck but at least you'll have a starting point. It'll read. Ust make sure you have newest flashtool. Just had the same problem with my x10. Its still havin troubles tho.
Stuck using xda app-developers app on a motorola backflip.
THeLogiC said:
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Click to expand...
Click to collapse
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
gyurc said:
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
Click to expand...
Click to collapse
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
luck_shawn said:
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
Click to expand...
Click to collapse
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
gyurc said:
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
Click to expand...
Click to collapse
Hey go back to stock 1st then try rooting later,
1) launch pc companion
2) select support zone
3) now select phone software update
4) then click on repair phone
Now software will download the stock ROM along with stock kernel..
When the software asks you to connect in flash mode, do the following
1) turn off the phone
2) Remove battery
3) Connect the USB cable to phone as well as to the laptop
4) Place the battery back while holding down the back button (3rd button from the left)
5) Green light should glow and the stock ROM and kernel should be flashed automatically..
When it's done you should have a stock unrooted X10, if you want then flash custom Rom after rooting it, be sure to unlock the boot loader if u want to flash custom kernel... Good luck
Sent from my X10S using xda app-developers app
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
gyurc said:
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
Click to expand...
Click to collapse
what do you mean by flashtool cant be done?
try this:
1) open flashtool
2) press the flash button and select any stock ftf firmware
3) now after pop up comes to connect phone in flashmode---- remove battery, connect the phone via usb, and lastly pressing back button insert battery simultaneously.
Now the flashing should start hopefully.
if this doesnt work please post the error you get in flashtool
i have the same problem with my phone only mine is x10i i reflashed 2.3.3. ftf ..like 7..8 times ..and still not working..btw smth the flashtool give me some error ..and other times works and says that the phone was flashed ..but phone still only 1 virbate and 1 blink green light now i am kinda bumped because i repair it once ...and now has the same problem
hello all!
thanks for all help.
What happened:
Hopefully i found the USB port have error. If is stand in half leg, not breathing for a minute and beg for christmas the connection made successfully, and first the SEUS , after the flashtool can recognize the phone well.
Now the phone working perfectly and going to my friend's service for fix the usb port problem.
I bought the phone in U.S.A
about one month ago I was listning to music on the phone when suddenly the phone turned off and did not turn on again...
I tried soft and hard reset but nothing happened... I went to techinal support and they coul'd find out what happened...
Now, I don't know what to do... Can someone please help me???
mottoca said:
I bought the phone in U.S.A
about one month ago I was listning to music on the phone when suddenly the phone turned off and did not turn on again...
I tried soft and hard reset but nothing happened... I went to techinal support and they coul'd find out what happened...
Now, I don't know what to do... Can someone please help me???
Click to expand...
Click to collapse
Hi,
Maybe battery dead? Leave phone connected over USB cable
for an hour, if not power up, try replace a battery.
BR
recover from dead phone
hi.. download new 7.8 or same firmware using navifirm+ 1.7 on your pc, select your firmware base (RM8xx) then chose your country variant, if not listed, just pick one, download latest nokia care suite and launch it, stay on " no connection" option...go to file then select "open product" choose your brand or choose RM817 if your phone is RM801 (if flashing 7.8).. go to programming and select "recovery" then your downloaded firmware will automatically appear on the list..if not, add its at file/setting /browse to the downloaded firmware and add it's.. on recovery list select downloaded firmware and make sure there's update automatically and usb dead phone flashing is checked... then shutdown phone completely and turn on while holding the volume up button and connect it to pc then click start... when the recovery is started, you can release the volume button and wait until its done.. now your phone should be boot and alive..... (if you're flashing 7.8 firmware and your phone is RM801, you have to flash its using RM817 base.. if not, you can't get a recovery option on RM801 base..):laugh:
graphbyte said:
hi.. download new 7.8 or same firmware using navifirm+ 1.7 on your pc, select your firmware base (RM8xx) then chose your country variant, if not listed, just pick one, download latest nokia care suite and launch it, stay on " no connection" option...go to file then select "open product" choose your brand or choose RM817 if your phone is RM801 (if flashing 7.8).. go to programming and select "recovery" then your downloaded firmware will automatically appear on the list..if not, add its at file/setting /browse to the downloaded firmware and add it's.. on recovery list select downloaded firmware and make sure there's update automatically and usb dead phone flashing is checked... then shutdown phone completely and turn on while holding the volume up button and connect it to pc then click start... when the recovery is started, you can release the volume button and wait until its done.. now your phone should be boot and alive..... (if you're flashing 7.8 firmware and your phone is RM801, you have to flash its using RM817 base.. if not, you can't get a recovery option on RM801 base..):laugh:
Click to expand...
Click to collapse
Thanks a lot...helped me alot..
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
imperialrealcs said:
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
Click to expand...
Click to collapse
wrong section !!!!!!!!!!!!!!!!!!!!
PLz post in correct section..........
This is DEV section...............
Request to MOD sent for removeing this thread..........
imperialrealcs said:
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
Click to expand...
Click to collapse
the flashtool popup was a window that asks you which phones drivers to use...in this case, because the XGO isnt listed there you choose the U,Sola,P drivers. Why would you click cancel? I think you didnt know what you were doing there..........
Take the battery out.
Leave for a few seconds.
Hold down vol down
Insert battery, keep vol down pressed
Quickly jam the USB cable in.
You should get back into Flashboot.
XGOs battery isnt removable buddy...
Sent from my ST27i using xda app-developers app
OverdiveKill said:
XGOs battery isnt removable buddy...
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
Use the latest version of flash tool. Install the drivers from flashtool/drivers. had the same problem for me too. use the power vol up key combinations to restart (hold till a vibration) or completely power off (hold till a vibration followed by 3 continuous vibrations).
this solve my problem! using latest flashtool has the driver for xperia go! thanks!
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Remove the back cover and find the OFF button, you need to push it with a pencil while holding the power button at the same time until it vibrates or turns off.
PLEASE READ USER'S MANUAL
read this http://forum.xda-developers.com/showpost.php?p=43355247&postcount=2
Ok but i cant go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok but i can go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
You may go into recovery to restore a backup...but not always works. If it keeps getting a boot loop you may need to use flashtool to repair it
Ok but can you give me instructions what to do
Sent from my ZTE Blade G using xda app-developers app
@KiaTheKing try this : in cwm go to storage and mount >> format /system. Then reboot. May this will help you.
Sent from my C5303 using XDA Premium 4 mobile app
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Keep the phone turned off. Repair it with PC Companion or Update Service, both are Official Sony tools.
http://www.sonymobile.com/gb/tools/update-service/
Ok thanks i will try if someone has another solution pls post!
Ruchra said me that i must to flah ftf using flashtool can someone help me with this?and give detailed instructions how to flash it and what ftf to flash.thank you for support.
Sent from my ZTE Blade G using xda app-developers app
1) Download correct ftf from general section, general one for your device.
2) turn phone off with power button under the back cover till you get the 3 vibrations.
3) download flashtool and install all the drivers.
4) start flashtool and close PC companion ( if you have this open)
5) plug USB into phone
6) hold volume down and plug USB into pc, ( should get a green light on xperia sp on led for short time)
7) flashtool should identify device attached in flash mode.
8) select flash and use correct tft you downloaded earlier.
You may need to get files ready as phone can then load to Sony logo again after a few minutes. Got to flash it quick. May need to do it 2-3 times before you get the timing right, took me a few attempts. Hope this helps.
Sent from my Nexus 7 using xda app-developers app
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
My phone reboots always when computer want to install driver for flashmod? what to do
bez_iom said:
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
Click to expand...
Click to collapse
PLS HELP
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
bez_iom said:
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
Click to expand...
Click to collapse
Yup, and then phone go to sony logo!and when i go flash it says Error in processheader: 31 : A device attached
to do system is not functioning
Error flashing aborted
EDIT: i tried again and it starts to flash now i will se does it works.
Тhank you.You saved my life..
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Can you give some information about your phone.
Specifically the model, FW version and region of your subscription before you messed up.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
bez_iom said:
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
Click to expand...
Click to collapse
when flashing an ftf file, your phone must be completely turned off, when the flashtool says "connect your device" what you're going to do is hold the VOL DOWN button while connecting your micro-usb to your phone, when you connect the usb to your phone, the green LED light must light and then when the light comes out, that's the only time you'll release the VOL DOWN button.
Glad it worked for you.
Sent from my Nexus 7 using xda app-developers app
Do exactly as follows, and your device will be fine..
first, keep the phone for charging.. that time u will either get a charging notification or a green led will be lit up, when u see either of these two,disconnect the device and it will stay off. Now move to the next step
Visit this link:
http://www.sonymobile.com/us/tools/pc-companion/
Click on Download PC Companion
Run the software and install it
Turn the phone off and disconnect it from the computer
1. No matter what the program says do not connect the phone until you complete step 9
2. In the welcome screen you will see the different modules available for you including the "Support Zone" option. Click on "Start" below it.
3. On the next page Click on "Start" under "Phone Software Update"
At this point if you get an error stating that "Unable to install update components" or "Server is busy" , then please proceed to step 12
4. The program will say that there is no phone connected. Click on the option below that reads: "Repair my phone" the program will issue you a warning about the content that you will lose during the update
5. Choose the option to continue.
6. The program will issue a final message warning you of possible data lost during the update. Click on the checkmark and then on "Next".
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose your phones model from the list then click on "Next" then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.)
Please do let me know if this has worked
Hi
I have a lenovo P780 dual SIM phone puchased in India.
Im not sure if it was the 4/8GB model. This phone however had a Chineese bootloader.
The phone used to restart and hang randomly even during calls. now where i live there is no lenovo service center and my phone last night shutdown completely not even turing on anymore
When you insert USB cable/charger the phone shows a red LED light meaning it might be charging i think. I downloaded SP Flash Tool and read about what it is used for etc etc.
I cant get this phone to turn on. also i cant get it to be detected by my computer there is no USB connect / disconnect sounds when i plug it on my pc hence i dont believe the SP Tool can will be able to do any thing. and the bloody battery is non removable !!!
I installed the MTK65XX /6589 drivers by force on my system via device manager but still nothing is detected.
is there a way to jump start this phone or do some random combinations ? or ???????????
please help asap on what can be done to get this phone
Also i tried installed the drivers for MediaTek USB etc etc is this what im supposed to see on my device manager or is there something wrong ?? see attached pic.
Also the MediaTek PreLoader USB VCOM driver says "fails to start" and if i do an update on it it gives that error and disapears. is everything how its meant to be?
dead soul said:
Hi
I have a lenovo P780 dual SIM phone puchased in India.
Im not sure if it was the 4/8GB model. This phone however had a Chineese bootloader.
The phone used to restart and hang randomly even during calls. now where i live there is no lenovo service center and my phone last night shutdown completely not even turing on anymore
When you insert USB cable/charger the phone shows a red LED light meaning it might be charging i think. I downloaded SP Flash Tool and read about what it is used for etc etc.
I cant get this phone to turn on. also i cant get it to be detected by my computer there is no USB connect / disconnect sounds when i plug it on my pc hence i dont believe the SP Tool can will be able to do any thing. and the bloody battery is non removable !!!
I installed the MTK65XX /6589 drivers by force on my system via device manager but still nothing is detected.
is there a way to jump start this phone or do some random combinations ? or ???????????
please help asap on what can be done to get this phone
Also i tried installed the drivers for MediaTek USB etc etc is this what im supposed to see on my device manager or is there something wrong ?? see attached pic.
Also the MediaTek PreLoader USB VCOM driver says "fails to start" and if i do an update on it it gives that error and disapears. is everything how its meant to be?
Click to expand...
Click to collapse
Actually MTK device are nearly unbrickable. Last time my P780 flashing process was interrupted at the middle of flashing (PC hangs).My heartbeat stops at the moment but thank god my phone didn't brick.
Firstly, did you installed the correct drivers? If the LED still lit that means your phone haven't brick yet.
Download the drivers here and follow the instruction. This guide should help you fix your phone.
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
soralz said:
Actually MTK device are nearly unbrickable. Last time my P780 flashing process was interrupted at the middle of flashing (PC hangs).My heartbeat stops at the moment but thank god my phone didn't brick.
Firstly, did you installed the correct drivers? If the LED still lit that means your phone haven't brick yet.
Download the drivers here and follow the instruction. This guide should help you fix your phone.
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
thanx for the response and the thread u pointed me to. but my phone doesnt even show on device manager and there is no any USB sounds like u know when u insert a USB flash drive u hear sounds? when i insert my phone no sounds. but only red led light of charging i think is showing. it is strange such a phone can just kill itself !! it was never dropped, inserted in water.. always was in good hands and even has a good cse + screen protector !!!
i will will format another PC and do everything driver installation from scratch. in the mean time let me know what else can be done cause i have done all in that thread u sent me.
thanx
dead soul said:
Hi
I have a lenovo P780 dual SIM phone puchased in India.
Im not sure if it was the 4/8GB model. This phone however had a Chineese bootloader.
The phone used to restart and hang randomly even during calls. now where i live there is no lenovo service center and my phone last night shutdown completely not even turing on anymore
When you insert USB cable/charger the phone shows a red LED light meaning it might be charging i think. I downloaded SP Flash Tool and read about what it is used for etc etc.
I cant get this phone to turn on. also i cant get it to be detected by my computer there is no USB connect / disconnect sounds when i plug it on my pc hence i dont believe the SP Tool can will be able to do any thing. and the bloody battery is non removable !!!
I installed the MTK65XX /6589 drivers by force on my system via device manager but still nothing is detected.
is there a way to jump start this phone or do some random combinations ? or ???????????
please help asap on what can be done to get this phone
Also i tried installed the drivers for MediaTek USB etc etc is this what im supposed to see on my device manager or is there something wrong ?? see attached pic.
Also the MediaTek PreLoader USB VCOM driver says "fails to start" and if i do an update on it it gives that error and disapears. is everything how its meant to be?
Click to expand...
Click to collapse
Ok... Lets try to help you.
First download the firmware from here:
http://forum.xda-developers.com/lenovo-p780/development/life-0-7-8gb-lenovo-p780-t2738560
Step by step you wil do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone - skip this step is allready powered off
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and ONLY NOW connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
stympy said:
Ok... Lets try to help you.
First download the firmware from here:
http://forum.xda-developers.com/lenovo-p780/development/life-0-7-8gb-lenovo-p780-t2738560
Step by step you wil do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone - skip this step is allready powered off
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and ONLY NOW connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
Click to expand...
Click to collapse
Thanx for the help, I will have to try this tomorrow as it's late ryte now.
However after leaving the phone untouched for 2 days or so I did do already what you said before but add this phone battery is non removable I pressed the small red reset button holding it with power button then plugged to laptop then only released the red reset button and hold the power button that's when it got detected and during this time the sp flash tool was already on with scatter file chosen etc etc and I had clicked the download button do it moved quickly with red bar then stopped didn't continue when I saw the error/error log something to do with time out so I think maybe the battery was low
So when flashing occurs in these phones do we need a charged battery or not?? As with other tutorials they say sometimes we have to remove and re insert the battery but my phone model battery is non removable..I'm planning to open it and disconnect and reconnect again
Leaving phone charge over night just incase.cause problem it just doesn't switch on.but red LED is showing when charger is connected
Sent from my GT-I9505 using Tapatalk
dead soul said:
Thanx for the help, I will have to try this tomorrow as it's late ryte now.
However after leaving the phone untouched for 2 days or so I did do already what you said before but add this phone battery is non removable I pressed the small red reset button holding it with power button then plugged to laptop then only released the red reset button and hold the power button that's when it got detected and during this time the sp flash tool was already on with scatter file chosen etc etc and I had clicked the download button do it moved quickly with red bar then stopped didn't continue when I saw the error/error log something to do with time out so I think maybe the battery was low
So when flashing occurs in these phones do we need a charged battery or not?? As with other tutorials they say sometimes we have to remove and re insert the battery but my phone model battery is non removable..I'm planning to open it and disconnect and reconnect again
Leaving phone charge over night just incase.cause problem it just doesn't switch on.but red LED is showing when charger is connected
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
OK. Let it charge to full. Then try again and tell me what is says.
stympy said:
OK. Let it charge to full. Then try again and tell me what is says.
Click to expand...
Click to collapse
Ok will do.Thanx
Sent from my GT-I9505 using Tapatalk
stympy said:
OK. Let it charge to full. Then try again and tell me what is says.
Click to expand...
Click to collapse
I fully charged it
- Not switching on
- Only red LED when charger connected
- connected to laptop on different USB ports not detected
- tried connecting with different combinations not detected by laptop
But all drivers installed !
Battery is non removable !!!!
Any better ideas??
Sent from my GT-I9505 using Tapatalk
dead soul said:
I fully charged it
- Not switching on
- Only red LED when charger connected
- connected to laptop on different USB ports not detected
- tried connecting with different combinations not detected by laptop
But all drivers installed !
Battery is non removable !!!!
Any better ideas??
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Lets try this:
1. Open the phone case
2. Insert the cable in the USB port
3. Open Flash Tool
4. Select dadl and all that then pres Upgrade
5. Now press the little red button from the back of the phone and wait about 20 seconds and something must goin on. Iff not point 6.
6. tell me what is going on!
stympy said:
Lets try this:
1. Open the phone case
2. Insert the cable in the USB port
3. Open Flash Tool
4. Select dadl and all that then pres Upgrade
5. Now press the little red button from the back of the phone and wait about 20 seconds and something must goin on. Iff not point 6.
6. tell me what is going on!
Click to expand...
Click to collapse
I tried what you said and after fiddling for a while the phone managed to get detected by the SP Flash Tool then it got flashed by the SP Flash Tool for some reason a yellow circle came up and the USB seemed like it got disconnected automatically
i just left the machine and the phone+SP Flash tool as they are hoping to get that green circle.. bu nothing happen !!! phone is black screen just like dead... after fiddling again multiple times with key cobinations .. i managed to get it boot with the below procedure
pressed the small reset button, press both volume up and down + power button altogether then released the small red button for after maybe around 10 seconds and while the others are pressed !! then the phone booted !!
and ontop of that it booted with the lenovo logo and the slogan i believe "for thos who do" stayed for a while kinda flashing itself i think.. but no progress bar.. I almost thought i was on some boot loop maybe or soft brick but luckily it booted into the russian Life ROM I flashed after that phone went to homes screen and just died again !!!!!!!!!!!
im thinking maybe it may be a hardware issue?? or ??
dead soul said:
I tried what you said and after fiddling for a while the phone managed to get detected by the SP Flash Tool then it got flashed by the SP Flash Tool for some reason a yellow circle came up and the USB seemed like it got disconnected automatically
i just left the machine and the phone+SP Flash tool as they are hoping to get that green circle.. bu nothing happen !!! phone is black screen just like dead... after fiddling again multiple times with key cobinations .. i managed to get it boot with the below procedure
pressed the small reset button, press both volume up and down + power button altogether then released the small red button for after maybe around 10 seconds and while the others are pressed !! then the phone booted !!
and ontop of that it booted with the lenovo logo and the slogan i believe "for thos who do" stayed for a while kinda flashing itself i think.. but no progress bar.. I almost thought i was on some boot loop maybe or soft brick but luckily it booted into the russian Life ROM I flashed after that phone went to homes screen and just died again !!!!!!!!!!!
im thinking maybe it may be a hardware issue?? or ??
Click to expand...
Click to collapse
Hi ! When Life ROM is flashing, no progres barr appears. Did you tried to remain on Life rom ? At least for a week ? Before you go in a service store try to stay with Life and iff this bug appears again go to service store.
stympy said:
Hi ! When Life ROM is flashing, no progres barr appears. Did you tried to remain on Life rom ? At least for a week ? Before you go in a service store try to stay with Life and iff this bug appears again go to service store.
Click to expand...
Click to collapse
I mean the ROM is still in there !! And the phone is just acting up again. Not booting..I think it's hardware. not software....,!! Will leave it for like a day or two and try booting it / flashing once more...oh and we have service centers my country where currently at
Sent from my GT-I9505 using Tapatalk
Yes. Seems to me is a hardware problem. Please let me know what was the problem iff you go with the phone in service. Good luck.
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
Yes. Seems to me is a hardware problem. Please let me know what was the problem iff you go with the phone in service. Good luck.
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
Oh I meant to say we don't have a service center in my country...typo using Swype keyboard lol
Sent from my GT-I9505 using Tapatalk
dead soul said:
Oh I meant to say we don't have a service center in my country...typo using Swype keyboard lol
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
That's a big problem indeed. Try to contact the sales store. Maybe they can help you.
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
That's a big problem indeed. Try to contact the sales store. Maybe they can help you.
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
Oh I just realised you are using the same Lenovo P780.from you're signature
Sent from my GT-I9505 using Tapatalk
dead soul said:
Oh I just realised you are using the same Lenovo P780.from you're signature
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Yes. Indeed i use very mutch this phone.
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
That's a big problem indeed. Try to contact the sales store. Maybe they can help you.
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
I opened the phone today removed the battery...plugged into laptop, then did various tricks of key combinations with and without the battery still phone seems dead !! I guess the owner will send the phone back to India for repairs...or where you from do they sell motherboards for this model? If Yes can you send me website link even if it's in your local language if available want to compare prices... will use Google translator to translate if not in English
Sent from my GT-I9505 using Tapatalk
dead soul said:
I opened the phone today removed the battery...plugged into laptop, then did various tricks of key combinations with and without the battery still phone seems dead !! I guess the owner will send the phone back to India for repairs...or where you from do they sell motherboards for this model? If Yes can you send me website link even if it's in your local language if available want to compare prices... will use Google translator to translate if not in English
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Aliexpres.com
stympy said:
Lets try this:
1. Open the phone case
2. Insert the cable in the USB port
3. Open Flash Tool
4. Select dadl and all that then pres Upgrade
5. Now press the little red button from the back of the phone and wait about 20 seconds and something must goin on. Iff not point 6.
6. tell me what is going on!
Click to expand...
Click to collapse
while trying to repartition MIUI v6 on my p780 it happened to me.
for once i thought it's gone "usb not recognised error, no device detected on sp flashtool" :crying:
but thanx to your reset button method :good:
m back again :victory: