Hello, i have a big problem with my phone, the phone stuck at SE logo, if remove battery and restart again the phone maybe start normal, but the problem is that i flash phone with original rom and the problem is same, i update at lastest firmware... is time when have a lot of error and phone restart and stuck or start long time. Who can help me? sorry for my enghish
diniulian said:
Hello, i have a big problem with my phone, the phone stuck at SE logo, if remove battery and restart again the phone maybe start normal, but the problem is that i flash phone with original rom and the problem is same, i update at lastest firmware... is time when have a lot of error and phone restart and stuck or start long time. Who can help me? sorry for my enghish
Click to expand...
Click to collapse
Flash again with SE Update Service
@diniulian
dont panic when something goes wrong. Do a full update using SE update service, and then try if it boots well. post results
Tommylee567 said:
@diniulian
dont panic when something goes wrong. Do a full update using SE update service, and then try if it boots well. post results
Click to expand...
Click to collapse
THX for reply
can help me with a link to download , i search on google but i can't find the SE update service, the links with seus redirect me to sonyericsson.com to download pc companion.
I succeed to find SE update service, i installed and i made a full update, but the problem is same, stuck at SE logo... . It's posible to be a hardware problem? All that problems was apper after instal a custom rom (GingerDx pro v15). now the phone stuck at se logo. Another solution ? pls hlp
im sorry as i dont know what to reply. i guess the devs may have an idea.
if you tell the probably tell the steps exactly what you did, someone else can help you with this.
THX for your answer
ok, i will tell u step by step :
First a had rooted phone and install a custom rom ( [ROM] 2.1.1.Clean.0.0 ) and i wanted install custom rom GingerDX v15, so i run in xrecovery instal update.zip and after phone stuck at se logo, i remove battery to restart and run again new custom rom but the phone stuck. I flash phone with original rom but the problem remained same, phone stuck at se logo. Is time when phone run normal, but is time when stuck..., and i have a problem with a lot of errors like: "Sorry application nnnn.vvvv.com can't....." Exist a special soft to full hard and soft reset and flash or any solution?
Similar problem....urgent help.plz...
Hi... I rooted and install xrecovery on my xperia x10 mini...in order to install custom rom...i had old buggy firmware 2.0.1 somthing like that ...so I fist have to update my android to 2.1.A etc firmware....but pc companion was not detecting my phone (when switched off) during step u know "connect to usb while holding back button".... But my windows xp n 7 both gave errors of "not recognizing usb".... So I stupiditly went to custom rom and installed the latest custom rom from sdcard(without updating to latest firmware from pc companion)....the custom rom installed successfully.....but phone is stuck on se logo.... Now im not able to go to recovery mode....neither I am able to switch off my phone as power button not working.... X10 mini battery cant be removed .... What should I do now?? Plz help quick .... Plz
diniulian said:
THX for your answer
ok, i will tell u step by step :
First a had rooted phone and install a custom rom ( [ROM] 2.1.1.Clean.0.0 ) and i wanted install custom rom GingerDX v15, so i run in xrecovery instal update.zip and after phone stuck at se logo, i remove battery to restart and run again new custom rom but the phone stuck. I flash phone with original rom but the problem remained same, phone stuck at se logo. Is time when phone run normal, but is time when stuck..., and i have a problem with a lot of errors like: "Sorry application nnnn.vvvv.com can't....." Exist a special soft to full hard and soft reset and flash or any solution?
Click to expand...
Click to collapse
Step to instal custom ROM :
1. copy ROM to sd card
2. boot in CWM or xrecovery (see the ROM instalation requitments)
3. factory reset/full wipe, wipe cache, wipe dalvik cache.
4. instal zip from sd card (chose the ROM)
5. reboot
i think you can't instal GinggerDX v 15 with Xrecovery, you must instal with CWM recovery
---------- Post added at 10:21 AM ---------- Previous post was at 10:00 AM ----------
rang6300 said:
Hi... I rooted and install xrecovery on my xperia x10 mini...in order to install custom rom...i had old buggy firmware 2.0.1 somthing like that ...so I fist have to update my android to 2.1.A etc firmware....but pc companion was not detecting my phone (when switched off) during step u know "connect to usb while holding back button".... But my windows xp n 7 both gave errors of "not recognizing usb".... So I stupiditly went to custom rom and installed the latest custom rom from sdcard(without updating to latest firmware from pc companion)....the custom rom installed successfully.....but phone is stuck on se logo.... Now im not able to go to recovery mode....neither I am able to switch off my phone as power button not working.... X10 mini battery cant be removed .... What should I do now?? Plz help quick .... Plz
Click to expand...
Click to collapse
repair with SE Update Service.
you must have same firmware in ROM requitments before instaled.
stiv8785 said:
Step to instal custom ROM :
1. copy ROM to sd card
2. boot in CWM or xrecovery (see the ROM instalation requitments)
3. factory reset/full wipe, wipe cache, wipe dalvik cache.
4. instal zip from sd card (chose the ROM)
5. reboot
i think you can't instal GinggerDX v 15 with Xrecovery, you must instal with CWM recovery
---------- Post added at 10:21 AM ---------- Previous post was at 10:00 AM ----------
repair with SE Update Service.
you must have same firmware in ROM requitments before instaled.
Click to expand...
Click to collapse
I will try to factory reset/full wipe, wipe cache, wipe dalvik cache, now i can't run in xrecovery, i root the phone, install xrecovery 1.85 and copy the 3 files (busybox, chargemon and xrecovery.tar) to system/bin, restart the phone (with posibility to stuck at se logo) and push back back... and nothing, or stuck at se logo or run normal...
I want to sell but must be repair of this problem, i want to be serious seller.
I'm back with news, i succed to run in xrecovery, i factory reset/full wipe, wipe cache, wipe dalvik cache, problem is same , so i decided to install a custom rom (211Clean00), and i have a surprise with one new error :
E:can't symlink /system/xbin/su
E: failure at line 236: symlink /system/bin/su System:xbin/su
Installation aborded.
diniulian said:
I will try to factory reset/full wipe, wipe cache, wipe dalvik cache, now i can't run in xrecovery, i root the phone, install xrecovery 1.85 and copy the 3 files (busybox, chargemon and xrecovery.tar) to system/bin, restart the phone (with posibility to stuck at se logo) and push back back... and nothing, or stuck at se logo or run normal...
I want to sell but must be repair of this problem, i want to be serious seller.
Click to expand...
Click to collapse
Don,t use xrecovery to install the ROM, most rom now installed with cwm recovery not xrecovery.
here thread to instal cwm recovery http://forum.xda-developers.com/showthread.php?t=1257701
and read carefully the installation instructions in the thread ROM.
---------- Post added at 02:08 AM ---------- Previous post was at 02:05 AM ----------
diniulian said:
I'm back with news, i succed to run in xrecovery, i factory reset/full wipe, wipe cache, wipe dalvik cache, problem is same , so i decided to install a custom rom (211Clean00), and i have a surprise with one new error :
E:can't symlink /system/xbin/su
E: failure at line 236: symlink /system/bin/su System:xbin/su
Installation aborded.
Click to expand...
Click to collapse
Flash with SE Update Service
Yeah, so i want to install ROM on my xperia sola via CWM (clockworldmod), before i want install the rom via Recovery mode, i wipe dalvik cache and format android data, but then i forget to put ROM zip file in internal memory...so i reboot again to move the file into internal memory...and then when i start my phone still stuck in "Sony" start screen
I have try to change kernels, but nothing happen, still stuck. but the phone still fully functional i think, i still can acess fastboot, recovery mode. The LED show blue light when stuck
i really need help
sorry for bad english language,
Thank you
I't all started when i tried to install a custom rom (Zelly Cream to be exact) on my xperia neo. Before installing it, i first rooted it with a locked bootloader and all was fine. Then i proceeded to install the custom rom. Before installing it, i -
1. Wipe data/factory reset.
2. Wipe cache partition.
3. Wipe dalvic cache under advanced menu.
4. Wipe battery stats under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
Then i entered aroma installer and all was fine until the first boot when it just went to the sony boot screen and it would just bootloop from there.The main problem is that i cant get into recovery even though how mush i try. I made a nandroid backup before doing all of this and i wish to restore this backup. I am new to all of this stuff so please PLEASE help. I don't know what to do. BTW flashtool would just say device disconnected when i connected the phone to it. I'm running ics 4.0.4. Thanks in advance..
Shaarven said:
I't all started when i tried to install a custom rom (Zelly Cream to be exact) on my xperia neo. Before installing it, i first rooted it with a locked bootloader and all was fine. Then i proceeded to install the custom rom. Before installing it, i -
1. Wipe data/factory reset.
2. Wipe cache partition.
3. Wipe dalvic cache under advanced menu.
4. Wipe battery stats under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
Then i entered aroma installer and all was fine until the first boot when it just went to the sony boot screen and it would just bootloop from there.The main problem is that i cant get into recovery even though how mush i try. I made a nandroid backup before doing all of this and i wish to restore this backup. I am new to all of this stuff so please PLEASE help. I don't know what to do. BTW flashtool would just say device disconnected when i connected the phone to it. I'm running ics 4.0.4. Thanks in advance..
Click to expand...
Click to collapse
You needed to flash mt11i stock firmware to increase system partition size... And cwm is gone since you formatted system... Now You can flash with Flashtool to get back to stock which you seem to have problems with... Try SEUS...
Sent from my Xperia Neo V using xda app-developers app
Tried SEUS
Thanks for the reply. Just as you said, i tried seus but i couldn't enter fastboot mode. Everytime when i press the back button and connect the phone to the pc, it would just boot up into sony boot logo and bootloop from there...
My Bad
My bad. I was doing it the wrong way to boot up in fastboot. Now i can finally try seus. Thanks again for the reply:silly:
Just a correction... That will be flash mode...
Sent from my Xperia Neo V using xda app-developers app
Flash a custom rom
O sorry. Btw, if i want to flash a custom rom, i'll have to go from MT15i firmware to mt11i firmware right...
Shaarven said:
O sorry. Btw, if i want to flash a custom rom, i'll have to go from MT15i firmware to mt11i firmware right...
Click to expand...
Click to collapse
Yeah by excluding simlock, fota & kernel..
So seus worked? Phone boots?
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
So seus worked? Phone boots?
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
YES
Thanks a lot man, it really helped. You made my day up... Thanks again man..
Sent from my HTC One X+
#Viperx+# #elitekernel#
So as Wifi was not working on my Xperia u for team canjica's cm 10.+
I decided to install Miui5. but i did a stupid move, without copying the .zip of miui, i went into cvm and format /system, clear data, clear cache, clear dalvik cache, and tried to reboot but nothing happened.
So i went into choose zip from sdcard, and cm10.1.zip was there, but when I tried to install it i got an error saying
E: Error in /sdcard/cm10.1..*big name* kumquat.zip
And the installation aborted.
Now i cant startup my phone, cant flash anyother ram, im pretty scared.. what should i do? Please Help me..
You can flash stock sony rom using flashtool.
So i enter in flash mode and flash generic ftf ?
Before you flash you should do a backup, I am sure you will next time :d
Yes just flash FTF preferrably one you flashed before.
Yes, that's the way.
So here's what happened:
1. I unlocked the bootloader.
2. Flashed Nemesis Kernel using Command Prompt on PC.
3. Flashed Honami V2 ROM (without making a backup -__-) tru CWM. Wiped cache, dalvik cache, wipe data/factory ___, even tried reflashing the ROM but no luck.
4. And now I'm stuck with the boot logo. (where it shows "May the source be with you")
Can any body help me or have anyone had this issue? I also tried flashing the stock rom using Flashtool but it gives me the error that my drivers aren't properly installed. (and I've tried reinstalling the drivers.)
Any help would be greatly appreciated. I just want to bring my Xperia U back to life.
EDIT: I used my friend's PC to flash the stock tft file. Thanks for the suggestions bro!
its soft bricked.dont worry.i had same problem i tried my friends pc installed flashtool n drivers on it n flashed stock ics using it and it ws ok.
Sent from my Xperia U using xda app-developers app
I have the same problem with that ROM (Experimental and Nemesis kernels) -- they stop working after the first boot...
tunichi01 said:
So here's what happened:
1. I unlocked the bootloader.
2. Flashed Nemesis Kernel using Command Prompt on PC.
3. Flashed Honami V2 ROM (without making a backup -__-) tru CWM. Wiped cache, dalvik cache, wipe data/factory ___, even tried reflashing the ROM but no luck.
4. And now I'm stuck with the boot logo. (where it shows "May the source be with you")
Can any body help me or have anyone had this issue? I also tried flashing the stock rom using Flashtool but it gives me the error that my drivers aren't properly installed. (and I've tried reinstalling the drivers.)
Any help would be greatly appreciated. I just want to bring my Xperia U back to life.
Click to expand...
Click to collapse
Get a zip of stock based rom, mount usb from cwm and transfer it to internal storage. Flash it. You should be fine.
If that doesn't work, install flashtool drivers, get into flashmode and then flash a stock rom. Root it and install cmw via flashotool.
You will be ok... I have at least one soft brick every 3 months... But i'm just plain stupid sometimes...