Looks like ID64 has provided it for us. The bluetooth files are located on his FTP server at
ftp://akira:[email protected]
File Name 6315BT.zip
Please.. Who ever did the Bluetooth GPS... Help us out.. this is the phone edition widcomm stack and will/should work with the BT headset during phone calls.
How can I install this application?
Can't install, needs's developing
You can't install this application yet. This is out there for those who made the Bluetooth GPS work with the Widcomm stack.
We need someone out there to work with the old BluetoothGPS (original Widcomm solution) and work with these new files. We'll have a better bluetooth stack than the MS Stack.
So.. In short, this message is out there to attract the developers.
Maybe it's possible.
Maybe if someone still has Bluetooth GPS and can install it.. Then if they copy over these files on top of it, it will work.
Does anyone have the original BluetoothGPS.zip?
The files are fine, but there is no included registry settings.
We need more info
(an export of the whole registry would be a good idea)
Surur
WIDCOMM BT-PPC/PE 1.0.0 Build 1400
Compared file for file in kind between BlueTooth GPS and the WIDCOMM BT-PPC/PE 1.0.0 Build 1400 generally the later are leaner in terms of size.
The former however has more *.dll(s) - probably being an older version.
I have consolidated a list of files BTGPS installed in Xda II but was unable to make a copy but I shall try other ways to later.
After a full backup I plan to dump the WIDCOMM BT-PPC/PE 1.0.0 Build 1400 files over the BTGPS. Filenames seem to have been kept intact betweeen the two versions so hopefully the registry will not get screwed.
Registry is there
Someone has uploaded the registry. This should help
WIDCOMM BT-PPC/PE 1.0.0 Build 1400
Overwritten BlueToothGPS with WIDCOMM BT-PPC/PE 1.0.0 Build 1400 without problems but unable to initialize BlueTooth.
Will try to update registry later tonight.
Hello: I got it sorted and have put it on a new thread....
http://forum.xda-developers.com/viewtopic.php?p=57567#57567
WIDCOMM BT-PPC/PE 1.0.0 Build 1400
Good job icarusbop!
I already had BlueTooth GPS installed and running ok for a long time. Went on to overwrite it with the 6315BT files from the FTP server earlier but BlueTooth was unable to initialize.
Found out the BTTrayCE 1.0.0.1400 was not compatible somehow and causing conflict. Replaced it with the older BlueTooth GPS version and everything worked out fine. Nothing was done to my registry no changes was necessary - the old BlueTooth GPS registry was still holding up.
I may try your 1.4.1.59/60 if I run into problems. Thanks Bro.
P/S : This stack initializes very fast, no initialization or hardware errors, no incompatibilty issues with MS stack and very stable - left to test is the headset option.
Re: WIDCOMM BT-PPC/PE 1.0.0 Build 1400
Would you mind explaining step by step how did you do your setup... Just curious... Do you have problem using your headset? Have you tried it yet... ? Thanks!
[Krueger said:
Dr.Stein]Good job icarusbop!
I already had BlueTooth GPS installed and running ok for a long time. Went on to overwrite it with the 6315BT files from the FTP server earlier but BlueTooth was unable to initialize.
Found out the BTTrayCE 1.0.0.1400 was not compatible somehow and causing conflict. Replaced it with the older BlueTooth GPS version and everything worked out fine. Nothing was done to my registry no changes was necessary - the old BlueTooth GPS registry was still holding up.
I may try your 1.4.1.59/60 if I run into problems. Thanks Bro.
P/S : This stack initializes very fast, no initialization or hardware errors, no incompatibilty issues with MS stack and very stable - left to test is the headset option.
Click to expand...
Click to collapse
Steps
Not at all Bro. Well to begin with as I have mentioned I already had BlueTooth GPS installed.
I downloaded the 6315BT zip file from the FTP server extracted the files and plonked them over the BTGPS files in my Xda II. There were several files that needed to be renamed in order to overwrite completely - renamed files can later be deleted after reset - BTTrayCE.exe file should be skipped as I found the new version conflicts with Xda II MS stack.
As for the headset I have yet to test as I do not own one. Been hoping to get one but I haven't had the time to do so. Sorry.
I will see if anyone at work has a headset and give it a whirl.
Good Job!
OMFG
Where are my manners? Forgotten to thank NeoCole and ID64!
Thanks guys - NeoCole and ID64 - you guys rulez!
Re: Steps
Thanks for your reply Bro.... I have another question, Do you have two BT icon on the bottom-right of your screen or MS-BT icon goes away?
Thanks!
[Krueger said:
Dr.Stein]Not at all Bro. Well to begin with as I have mentioned I already had BlueTooth GPS installed.
I downloaded the 6315BT zip file from the FTP server extracted the files and plonked them over the BTGPS files in my Xda II. There were several files that needed to be renamed in order to overwrite completely - renamed files can later be deleted after reset - BTTrayCE.exe file should be skipped as I found the new version conflicts with Xda II MS stack.
As for the headset I have yet to test as I do not own one. Been hoping to get one but I haven't had the time to do so. Sorry.
I will see if anyone at work has a headset and give it a whirl.
Click to expand...
Click to collapse
Re: Steps
superperry said:
Thanks for your reply Bro.... I have another question, Do you have two BT icon on the bottom-right of your screen or MS-BT icon goes away?
Thanks!
Click to expand...
Click to collapse
No sweat Bro. Anytime Man.
There are still two - the same with BlueTooth GPS. Both works perfectly but individually.
Do you have the problem with "cant initialize" after softresetting, or does it just work perfectly?
Surur
Initialization
surur said:
Do you have the problem with "cant initialize" after softresetting, or does it just work perfectly?
Surur
Click to expand...
Click to collapse
No initialization problem since installation and startup yesterday. So far so good - yes even after several soft resets and wake after long standby time still no errors. Yeah I would say it's been working perfectly Bro.
Re: Steps
[Krueger said:
Dr.Stein]Not at all Bro. Well to begin with as I have mentioned I already had BlueTooth GPS installed.
I downloaded the 6315BT zip file from the FTP server extracted the files and plonked them over the BTGPS files in my Xda II. There were several files that needed to be renamed in order to overwrite completely - renamed files can later be deleted after reset - BTTrayCE.exe file should be skipped as I found the new version conflicts with Xda II MS stack.
As for the headset I have yet to test as I do not own one. Been hoping to get one but I haven't had the time to do so. Sorry.
I will see if anyone at work has a headset and give it a whirl.
Click to expand...
Click to collapse
What files should be renamed? Could you please tell me?
Re: Steps
ID64 said:
What files should be renamed? Could you please tell me?
Click to expand...
Click to collapse
Sorry. The truth is I didn't take note Bro. I renamed one by one as the copying process prompted that the files are in ROM. You can do the same. A post by mamaich has named a few of these files that needs to be renamed.
An easier solution would be to use icarusbop's 1.4.1.59/60 upgrade.
Please note that mine is only the BlueTooth GPS upgrade to WIDCOMM BT-PPC/PE 1.0.0 Build 1400 whereas mamaich's and icarusbop's is from 1.4.1.59/60 to WIDCOMM BT-PPC/PE 1.0.0 Build 1400. Theirs would be a better and newer version.
Here are screenshots of the WIDCOMM BT-PPC/PE 1.0.0 Build 1400 that I have installed.
Hi all, I was asking about if this BT solution has somenthing to do with Qtek2020 problem with BT headset and BT car kit management. I mean if I'd install BT Widcomm Bt Stack and 6315BT.zip, could I use both togheter?
Thanx a lot!
hi man im actually using wm6.5 build 21501 rom, and the bluetooth doesnt want to run... a mean, i can send file to other equipment or devices, but.. just cant receive... im trin to use, other soft like.. bluezard bt crawler, dryar bluetooth persian bluetooth ... and no,.. i cant receive nothing, in the other device that trys to send me anithing says something like obex error... help...
Same problem
I am also facing the same problem. Tried many options still other device is getting OBEX error. Please help!
G'Day All,
I have a T9193 that's about 3months old and have run into a Bluetooth issue.
When I start up the phone I get the message "BTTrayCE.exe is not a valid Pocket PC application"
When I try to turn on Bluetooth from Settings I get the message "Can't turn on Bluetooth"
I have had Bluettoth working before and the only thing that I think could have caused this is a failed installation of Tom Tom on the first go. I did eventually manage to successfully install Tom Tom but still can't get my Bluetooth function to work. I've tried a soft reset but that has made no difference.
Anyone have any ideas? Any assistance would be greatly appreciated.
Cheers,
Franz
I would suggest a hard reset. It looks like a system file corruption to me.
tomtom jacks up the bt files by replacing them with outdated ones. go to this post and unzip the bt files and put them in your windows folder (either by activesync or total commander).
http://forum.xda-developers.com/showpost.php?p=3900678&postcount=8
Hey!
I´m developing an application for backing up different kinds of information stored in a smartphone.
Therefore I need to send the data from my device to another hardware, I want to realize it via Bluetooth but.
I use a bluetooth - module called "JY-MCU" for the external hardware I send the data to.
So faar so good, the only problem I have is the bluetooth connection which breaks up while sending the data.
E/bt-btif ( 905): unknown send() error, sent:-1, p_buf->len:93, errno:32
That's the LogCat entry I got.
I googled the errors but was not able to find any answer...I hope you guys can help me interpreting this error.
Thanks
markus
I just bought the JVC KD-R792BT CD bluetooth receiver for my car. Streaming music works fine and with Android Auto e.g. in GMaps I can hear the voice with my car audio and the mic works for OK google. But when I try to make calls it just switches to the speaker and mic of my phone. In the bluetooth settings I have checked phone audio, media audio and contacts, but for phone audio it says "connected (no phone)".
How can I activate the mic and speakers of my car?
I'm on BlackX ROM based on Lineage 14.1.
Which ROM do you use for working car audio?
Thanks for replies.
Now I switched ROM to stock 28s. Same problem. I installed modem 466D. Same behavior.
I even checked the firmware of the stereo, but the latest is already installed.
The hands-free calls don't work, bluetooth always says "connected (no calls)" !
Nobody here who uses speaker phone with a cd receiver and got it working?
Scarhead said:
Now I switched ROM to stock 28s. Same problem. I installed modem 466D. Same behavior.
I even checked the firmware of the stereo, but the latest is already installed.
The hands-free calls don't work, bluetooth always says "connected (no calls)" !
Nobody here who uses speaker phone with a cd receiver and got it working?
Click to expand...
Click to collapse
I too had same problem with my powerbeats 3 and Le max 2, It worked up to 16s or 15s i guess but after that in every version (19s to 28s) it says connected (no phone)...
Previously i was using root method where i used to replace bluetooth.default.so file from 15s in my 28s in folder (system/lib/hw) and restart phone... it works by this method..
But recently i found new method, just temporarily flash twrp and flash the file linked below.. it ll do the job.
To temporarily boot into twrp type this command (mobile in fastboot)---- "fastboot boot filename.img"
https://mega.nz/#!uVx0FB4B!gR3xLJKzP5LWYg656sdN5LZJqd1Z4Wro0idZ25zOHJc
Hey thx man!
I just managed to fix it by replacing the bluetooth.default.so file (from 15s found in another thread) after rooting like you said you did some time ago.
Now can you tell me if your new fix-file will also work for custom roms?
Heyyo, for custom ROMs I believe they need Bluetooth acdb ID updates. I have been working on this for LineageOS 15.1 for x2.
https://review.lineageos.org/#/c/LineageOS/android_device_leeco_x2/+/217072/
1. To try them on any custom ROM? Please visit that link
2. Download > archive
3. Extract the audio_platform_info.xml and mixer_paths_tasha.xml
4. Now with a root file Explorer or via TWRP make a backup copy of the two files on your device (Nougat and earlier ROMs will be under /system/etc/ and Oreo and future ROMs would be under /system/vendor/etc/)
5. Copy the ones from my archive to that location
6. Reboot and see what happens!
Tbh I haven't fully tested the Bluetooth acdb ID changes as I don't have hands free BT vehicle audio but I image they are similar to my BT speaker that has a microphone on it... But I could be wrong...
I did what you said but unfortunately the problem remains. Connected but "no phone".
Heyyo, oh I just realized you're on BlackX LineageOS 14.1... I think it's a problem more with the ROM. I'd recommend trying an Oreo ROM