I've noticed my device is getting a bit warm right above the charger input, where screen meets the black frame around it.
Anyone else feels it or is it just me?
guru_shastri said:
I've noticed my device is getting a bit warm right above the charger input, where screen meets the black frame around it.
Anyone else feels it or is it just me?
Click to expand...
Click to collapse
I get some serious heat sometimes just above the bottom left corner. When it gets really hot sometimes the tablet will restart and go into a bootloop, I have to hold down the power button for over 1 minute for it to stop. I think it might have to do with the DooMKernel since it is still on V1 and never upgraded it still has a lot of bugs.
intersting..its probably different components that's heating.
if i had to gamble i'd say my cpu is heating and your wireless card.
i recommand you upgrade to task v3. it great.
guru_shastri said:
I've noticed my device is getting a bit warm right above the charger input, where screen meets the black frame around it.
Anyone else feels it or is it just me?
Click to expand...
Click to collapse
I shall check next time I charge and get back..
Sent from my HTC PG09410 using XDA
Related
Ok so I posted this in general but maybe I should've posted it here so yeah...
So when I hold my finger still at the left side of the touchscreen (as far as I can), for example when dragging the youtube cursor thingy (then the left side would be the bottom..), it will start to jump around.. Or for example when swiping the homescreen to the left. If I hold my finger still at the edge of the touch screen it will also jump around.
And for some reason this isn't happening when charging (or connected to the pc)
Anyone else having this problem?
Edit: Something to note is that this is my second GSII having this problem. Although the first one I had was a really a lot worse.
Could be some moisture or high humidity affecting it! I also sometimes have TS problems, I then just clear the screen and make sure my fingers are dry enough. Just could be.
Regards.
ithehappy said:
Could be some moisture or high humidity affecting it! I also sometimes have TS problems, I then just clear the screen and make sure my fingers are dry enough. Just could be.
Regards.
Click to expand...
Click to collapse
Yeah I tried clearing it.. But as I said it is not happening when connected to AC.. So yeah.. It's mostly annoying when trying to select a specific time in a video.. It's nothing major but still, such an expensive phone shouldn't have such a problem imo.
I will return it tomorrow.. If I remain the only one I know of having this problem..
But just to be sure.. You don't have this specific problem?
Nope. I don't. And please do make sure that the problem is enough to send the device for RMA.
When you are charging the device it gets hot, so there is less moisture and humid on the screen. So again, clean your phone screen with a micro fiber cloth and dry your fingers too, then see again.
If it still remains, then your choice.
Regards.
ithehappy said:
Nope. I don't. And please do make sure that the problem is enough to send the device for RMA.
When you are charging the device it gets hot, so there is less moisture and humid on the screen. So again, clean your phone screen with a micro fiber cloth and dry your fingers too, then see again.
If it still remains, then your choice.
Regards.
Click to expand...
Click to collapse
It's as soon as I plug in the cable (tried holding my finger on the ts while plugging it in, and when I did, it immediately stopped). And yeah I really cleaned it thoroughly.. But.. Could it be the touchscreen protector?.. With my other phone it didn't make any difference when I took it of, so I really don't want to take it off if not necessary cause those things are 5 eu each :/
Hmm, a pricey protector, shouldn't be an issue. But still it could be the reason.
ithehappy said:
Hmm, a pricey protector, shouldn't be an issue. But still it could be the reason.
Click to expand...
Click to collapse
I think I'll just go to the store tomorrow and if they ask me to remove it, I will.
ithehappy said:
Hmm, a pricey protector, shouldn't be an issue. But still it could be the reason.
Click to expand...
Click to collapse
Oh and thanks for your help.
I put a skinomi skin protector on and after that touch screen stopped working. I took it off and screen is still not working.
I got it to work by doing
by jk.jolin On Dec 29, 2011
Well, hard reset may help you fix this ASUS Transformer Prime touchscreen not responding issue: 1. Unplug the power cord and shut the unit off and Press and Hold the power button and the "Down" volume button together for 6-10 seconds and let them both go. 2. Wait a few more seconds until the term "Cold Boot" appears in the list near the top of the screens and just press and release the "Down" volume button again and let it reboot. If you own the dock be sure and do this with the dock connected.
Nevermind its not working again
kerryking1 said:
I put a skinomi skin protector on and after that touch screen stopped working. I took it off and screen is still not working.
Click to expand...
Click to collapse
Try washing the screen protector may have produced film on screen or just reboot
Now my keyboard isnt working so i cant shut it down
Keyboard started working again but not its frozen on shutting down
kerryking1 said:
Now my keyboard isnt working so i cant shut it down
Click to expand...
Click to collapse
Shut it down using power button hold for 30 seconds will shut down
It acting weird now its possessed. I let it sit there on home screen and random stuff opens.
kerryking1 said:
It acting weird now its possessed. I let it sit there on home screen and random stuff opens.
Click to expand...
Click to collapse
sounds like you've been remoted.
Maybe you spayed too much application solution that got inside tablet? dip it in a bag of rice may help..
This is funny.. play by play of what is happening
Hard reset and wait.
I went into my email and it started deleting emails
That's a wet screen protector, right? Definitely sounds like water damage. Same thing happened to me with the original Droid phone. Power it off, put it in a bowl of rice over night, and cross your fingers.
Sent from my Transformer Prime TF201 using Tapatalk
wasn't the Prime's gorilla glass enough protection eliminating the need for a screen protector in the first place?
it doesnt look like there is any holes on it to get into
kerryking1 said:
it doesnt look like there is any holes on it to get into
Click to expand...
Click to collapse
Edges around the screen?
I had a problem with my screen that was bad enough to cause me to return it. It was amazing in every other way, but the screen problem was a deal breaker. I'm gonna give it some time before I try again.
Video of my problem: http://www.youtube.com/watch?v=oywWUxPMeX8
-Chris
czm2000 said:
I had a problem with my screen that was bad enough to cause me to return it. It was amazing in every other way, but the screen problem was a deal breaker. I'm gonna give it some time before I try again.
Video of my problem: http://www.youtube.com/watch?v=oywWUxPMeX8
-Chris
Click to expand...
Click to collapse
now I noticed you were using a stylus pen in that video. Did this problem also occur when you used your finger?
the_game_master said:
now I noticed you were using a stylus pen in that video. Did this problem also occur when you used your finger?
Click to expand...
Click to collapse
+ 1
Sent from my Transformer Prime TF201 using xda premium
Its starting to work fine most of the time. When its messing up google search and settings keep opening.
Asus transpformer prime half touch screen not working
Hi
i have read a lot of the forums but no one else has mentioned this problem. My TF201 seems to have a unique problem, only the left half of the touch screen works. it becomes very annoying and i cant seem to find a solution.
I have let the battery discharge and then then restarted it after some charging but no Joy
Please guys Help and suggestions would be much appreciated.
Cheers
Rohit
rohitbapna said:
Hi
i have read a lot of the forums but no one else has mentioned this problem. My TF201 seems to have a unique problem, only the left half of the touch screen works. it becomes very annoying and i cant seem to find a solution.
I have let the battery discharge and then then restarted it after some charging but no Joy
Please guys Help and suggestions would be much appreciated.
Cheers
Rohit
Click to expand...
Click to collapse
Open prime and push in the cables into the lcd.. they must be loose. I had the same issue when i replaced a new screen.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Hello again, I got the Prime today but the screen has a bow at the top in the middle. It is not flush with the rest of the tablet. The other problem is it doesn't seem to be charging so I am a bit confused about that. Any thoughts?
Thanks,
First thought is you should maybe think about swapping it out. It shouldn't bow in the middle at all. Mine is flat as are all the ones I've played with in stores.. Second thought is it should also be charging lol .. what's your plan for when the battery dies???
Sounds like a dud to me. I'd swap it if I were you maybe
Sent from my SGH-I777 using Tapatalk 2
Ok, seems to be charging now but the bow seems a worry.
Yeah.. I wouldn't feel comfortable with a bow in the middle
Sent from my SGH-I777 using Tapatalk 2
Exchange it where you bought it from.
Its going back tomorrow. There is nothing wrong with the tablet other than GPS. Wi Fi is great. Seems like its just a loose clip or something.
Swap it out. There shouldn't be any bow in it. Tablet should be flat. Don't wait and swap it out immediately.
lol how is this even a question? we all know Asus QC is crap, any imperfections swap it out ASAP!
Hey... mine didn't come with a bow?!?
Wonder if it's too late to exchange it for one with a bow on top.
Got my second one and from what I have seen it has no light bleed and the frame is all good. I haven't really tuned it on I only saw the screen when it was showing me it needed charging.
Well the second one is great,b but with bith of mine I occasionally get a faint clicking noise whenever I hit the back,home or multitasking button and when I pick up an app on the home screens. Anyone else get this?
mdemons12 said:
Well the second one is great,b but with bith of mine I occasionally get a faint clicking noise whenever I hit the back,home or multitasking button and when I pick up an app on the home screens. Anyone else get this?
Click to expand...
Click to collapse
a faint clicking noise when hitting an onscreen software button? if so, cut off the sound for onscreen touches and such. doesn't really make sense. just sounds like you have it to make sounds when you press something on the screen. this can be cut off in the settings.
Ok, thanks for that. The last thing seems to be the battery. I read the instructions for once and it said to charge it all up. So i charged it till it was green and then powered it up for the first time. So as the instructions say i need to break the battery in. At the moment i am getting about 5-6 hours. The pad is on balanced with auto brightness. Does this seem normal for new battery. I would hope to end up with 9-10 or are my expeditions too high?
I will do a new topic cos its a new question
hey i have an strange problem sometimes randomly my phone screen goes crazy !!! if close the screen and reopen it the bug goes away and comes back randomly again but the problem became more constant after changing the battery with an anker one
any help ?
i never swapped my battery but mine did that before and i found out that my digitizer was going bad
This is a very common problem. Like the reply before me it seems to be a digitizer issue.
I have random touches, some time parts of the screen are unresponsive, and then even the whole screen will become unresponsive. A quick press of the power button and 90% issue stops. Sometimes only for a moment sometimes for hours or longer. Also seems to be worse on sense ROMs. I have changed firmware, hboots, kernels, ROMs, and radios with little to no difference.
Even though it sometimes acts like a software problem it is always there. Until a few weeks ago recovery never had an issue but it is now there also. Before that I was convinced it was software of some sort. Now I still want to think software because the issue is so random but until it gets to where the phone is almost unusable I am holding off on a digitizer.
Sent from my PG86100 using xda app-developers app
mitsakhs said:
hey i have an strange problem sometimes randomly my phone screen goes crazy !!! if close the screen and reopen it the bug goes away and comes back randomly again but the problem became more constant after changing the battery with an anker one
any help ?
Click to expand...
Click to collapse
It's static electricity.
It's hard to clean, Maybe use you 3D without Screen Protector a period of time.
foddyy said:
It's static electricity.
It's hard to clean, Maybe use you 3D without Screen Protector a period of time.
Click to expand...
Click to collapse
i dont use any Screen Protector neither any case
mitsakhs said:
i dont use any Screen Protector neither any case
Click to expand...
Click to collapse
Then maybe you can try a anti-static-electricity Screen Protector for several days.
Hello everyone,
As the title suggests I'm now another proud owner of the Samsung Galaxy S6 Edge (SM-G925F) and immediately a few questions rose.
First of all, I unboxed my device and did the first power on. However, I noticed something weird. From the 1st power on it only had 3% battery ! Is this normal guys? From all of the unboxing videos I watched on YouTube all of them where 40% + after the 1st power on! Is it normal to be so low ?? So, I immediately shut it down and got it charging.
Second, after plugging it in to charge it started from 0%. Probably it even lost these 3% it had lol. Anyway, charging started nice and fast but I noticed another thing. The phone got really hot while charging! Is this normal again? The back was quite hot and the aluminum bezels on the sides as well (especially side lower parts). I know that this device has fast charging so it may be this and also maybe that it started charging from too low , 0% .
(UPDATE: now that it is at 99% it's has really cooled down)
My 3rd question is probably a foolish one but forgive me please. :silly: When I got it out of the box, since I'm a crazy perfectionist, I started examining the body of this jewel with a really bright torch light hahaha. Everything seemed flawless apart from a couple of tiny little marks on the lower left part of the home button. (not scratched some kind of marks like tiny glue residue maybe) They didn't get away after wiping them, even with little water on a cloth. Also, they are not really visible. Maybe they are a bit in really bright conditions but still you should look for them to see them. So, are these kind of tiny imperfections normal too? I guess so, but just wanted to say hahahha.
One more. My heart rate sensor seem to have a little plastic protector applied on it. Am I right? I'm quite afraid to pull it so, is there a little membrane there? In camera, I'm not sure.
Thanks in advance and have fun happy owners!
When I got my first smartphone, the Motorola Droid Ultra on initial boot it had 1% battery, so battery being low on first boot is not unheard of. Yet you are right that it should have 40% on initial boot. The battery going to zero before going up again is something I have experienced as well. The phone getting hot is expected with how rapidly energy enters the battery. The last two I am unsure about. If you can remove the plastic do so
Snowby123 said:
When I got my first smartphone, the Motorola Droid Ultra on initial boot it had 1% battery, so battery being low on first boot is not unheard of. Yet you are right that it should have 40% on initial boot. The battery going to zero before going up again is something I have experienced as well. The phone getting hot is expected with how rapidly energy enters the battery. The last two I am unsure about. If you can remove the plastic do so
Click to expand...
Click to collapse
Thanks for your quick response!
Alright, so yea the low 1st power-on battery seems normal. I also asked Samsung and they say it's normal since they don't set any specific charge amount from factory but they just use it as much as needed (for quality control, I assume).
About the heart rate sensor yea, I realized that it has a little protector film which can be removed.
Also, what I told about the little "marks" on home button let me explain. You can't actually see this normally. You have to have your home button fully clean and then point a bright torch to it and then look carefully on the bottom left part of it and you can see some tiny little "marks" but still can't see them at every angle. However, they are not scratches, it may just be some little debris or glue residue under the button surface, probably on the fingerprint scanner. (maybe during assembly) But again this is from a crazy perfectionist's eye! :laugh::laugh::laugh: You can't see it in normal use. I guess if you take many S6 Edges out of the box and start examining them with a powerful torch, mm by mm for sure you will find different kind of "imperfections" in any of those. This thing must be the same for every device. But I like doing it just to know if there's something there in the first place.
Also, about the warm up thing. I updated to Android 6 and performed a hard reset afterwards. Also I disabled fast-charging from the menu. (don't know if it's also disabled when you charge the phone fully shut down tho.) In normal use the temperature is fine. When charging tho (when shut down) it warms up quite a bit on rear and on side bezels. So, you S6 Edge does the same?
Thanks a lot.
Snowby123 said:
When I got my first smartphone, the Motorola Droid Ultra on initial boot it had 1% battery, so battery being low on first boot is not unheard of. Yet you are right that it should have 40% on initial boot. The battery going to zero before going up again is something I have experienced as well. The phone getting hot is expected with how rapidly energy enters the battery. The last two I am unsure about. If you can remove the plastic do so
Click to expand...
Click to collapse
Also, 1 last question (detail style again).
When you start up the notification led lights dark blue and then lighter blue in sequences. So when it does that, I can tell that there is a little "2nd" led that lights up on the right side of the notification led and makes it brighter blue. My question is that, can you see that in yours? I ask this because in my Galaxy Alpha you can't tell where the "little leds" are but you just see a clean light changing colors. On S6 Edge though, you can tell that the notification led area must be somehow "splitted" so like there is "another little led" on the right side lighting up and changing the color. Is it the same to you?
Thanks
The low battery percentage you had in your phone is just normal.
The phone gets hot when it's being charged especially when it starts from a very low percentage. Do you imagine the amount of energy getting into your phone's battery? That's a lot.
Speaking of leds, mine has the same too.
Hope you have a great time with your phone!
Sent from my SM-G920F using XDA-Developers mobile app
TheLegend975 said:
The low battery percentage you had in your phone is just normal.
The phone gets hot when it's being charged especially when it starts from a very low percentage. Do you imagine the amount of energy getting into your phone's battery? That's a lot.
Speaking of leds, mine has the same too.
Hope you have a great time with your phone!
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you man. I noticed something else too though which worried me quite a lot. I will post it on another topic itself though so it can maybe be helpful for other owners too.
SGAlpha said:
Thank you man. I noticed something else too though which worried me quite a lot. I will post it on another topic itself though so it can maybe be helpful for other owners too.
Click to expand...
Click to collapse
Okay.
Sent from my SM-G920F using XDA-Developers mobile app