Please: My Xperia S dont conect in FlashMode, solution ? - Sony Xperia P, U, Sola, Go

When my Xperia S plugs into FlashMode, he is only 10 seconds and falls quickly, disconnects FlashMode and FlashTools say error.
How to solve this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do you run flash tools at Linux or vmware windows?
You may use pure window to try again.
Sent from my Galaxy Nexus using XDA

I run in windows vista.
Already solved the problem. I started Flashtools first, after, xperia S.
Thanks.
Close topic.

joaonds said:
I run in windows vista.
Already solved the problem. I started Flashtools first, after, xperia S.
Thanks.
Close topic.
Click to expand...
Click to collapse
I've the same problem, so you solved it turning on the Xperia FlasMOD after opening the FlashTool?
Right?

Braska90 said:
I've the same problem, so you solved it turning on the Xperia FlasMOD after opening the FlashTool?
Right?
Click to expand...
Click to collapse
Yes, open FlashTools first and dont connect Xperia S yet.
Click FlashMode, and Start the Flash.
Wait when the FlashTools say (in a windows pop up): " Turn Off your Device, Unpluged..." you connect your xperia S in your PC (in flashmode) with UBS cable, and solved the problem...

joaonds said:
Yes, open FlashTools first and dont connect Xperia S yet.
Click FlashMode, and Start the Flash.
Wait when the FlashTools say: " Turn Off your Device, Unpluged..." you connect your xperia S in your PC with UBS cable, and solved the problem...
Click to expand...
Click to collapse
Thanks a lot

Why mine always goes on fastboot mode instead of flashmode? I tried both up volume botton and down volume button but every time goes on fastboot..

carmello1911 said:
Why mine always goes on fastboot mode instead of flashmode? I tried both up volume botton and down volume button but every time goes on fastboot..
Click to expand...
Click to collapse
That's impossible,vol down is the green led means flash mode,vol up is blue led means fastboot mode.
Sent from my LT26i using Tapatalk 2

figured it out lol! thanks!
Sent from my BlackBerry Runtime for Android Apps using XDA App

joaonds said:
I run in windows vista.
Already solved the problem. I started Flashtools first, after, xperia S.
Thanks.
Close topic.
Click to expand...
Click to collapse
Same problem here. And this WORKS!! Thanks dude! :good:

Odp: Please: My Xperia S dont conect in FlashMode, solution ?
silvershiver0323 said:
Same problem here. And this WORKS!! Thanks dude! :good:
Click to expand...
Click to collapse
We have new record in refreshing old threads!
Sent from my LT22i using xda-developers app

Vaith said:
We have new record in refreshing old threads!
Sent from my LT22i using xda-developers app
Click to expand...
Click to collapse
Sorry for bringing this one up but I keep having the same problem.
-Start Flashtool
-Look for firmware to flash
-Wait for Flashtool to ask to go into flash mode.
-with device off, holding Vol DOWN I plug the usb cable
-Says connected in Flas Mode and after 10 sec it says device disconnected, USB Debugging OFF
Help

same trouble
WitchMX said:
Sorry for bringing this one up but I keep having the same problem.
-Start Flashtool
-Look for firmware to flash
-Wait for Flashtool to ask to go into flash mode.
-with device off, holding Vol DOWN I plug the usb cable
-Says connected in Flas Mode and after 10 sec it says device disconnected, USB Debugging OFF
Help
Click to expand...
Click to collapse
I've got the same problem.
I've tried everything but the phone just wont stay in flashmode. Is it the phone or its a bug in the Flash tool.
Any workarounds anyone?

noob7373 said:
I've tried everything
Click to expand...
Click to collapse
Wowo that's quite a lot.
Do you mind being more specific?

Made it work!
ChikeD said:
Wowo that's quite a lot.
Do you mind being more specific?
Click to expand...
Click to collapse
It seems a bit tricky, however the workaround previously mentioned in this thread worked for me too. I'll just mention the step by step process for getting through this problem.
>make sure your device is not connected to the computer.
>start FLASH TOOL.
>press flash and select the version of firmware you want to upgrade/downgrade to from the pop up. (Assuming you might have already downloaded the required firmware in your flash tool installed folder.)
>now FLASH TOOL will prompt you to connect the phone. Do so. While pressing the "down vol button" of your switched off device
(for Xperia S/SL). The phone will go into flash mode and you can see green notification light up in your phone.
>There you go, your firmware will flash and phone will be rebooted.

All right. So, important:
If you have WINDOWS 8.1, then don't even try to get flashmode/fastboot. Trust me, it won't work. And yes, different problem than it was on windows 8. As I searched, I think there is a main problem with USB inf files themselves on windows 8.1, and yet you can't put correct drivers on it, because it doesn't even recognize the phone in fastboot or flash mode. Search on google, and you'll find some answers, and there is a fix that maybe works with USB 3.0, but I don't have usb 3.0, so I cant test it

Related

[Q] Can't enter fastboot mode in my Neo V...

Hi everyone!
I'm new here, cause its been shor time having the Neo V. I love it.
Yesterday I wanted to install a custom ROM, so I started the tutorial here: http://forum.xda-developers.com/showthread.php?t=1409269.
I had the 4.0.4.a.0.62 rom, so I downgraded to 4.0.4.a.0.42. After that I rooted the phone as mentioned in another website. There was no problem on this because I've had other rooted smartphones and I can tell I rooted this one correctly.
After that I did the TP bootloader unlocking, and I'm pretty sure I did it ok, since when I identify the smartphone using s1tool, both codes start with "r", not with "R", as stated in this image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that I installed CWM without problem (I can access it correctly).
Now, with all that done, I can't access the fastboot mode to flash a kernel and all this stuff. I'm doing it correctly: pressing the "menu" and plugging the USB cable. May it have something to do with PC drivers? (I don't think so, I would say that if the pc didnt have the drivers it wouldnt recognize the neo v in fastboot mode, but it would boot in this mode anyway... even though, I've installed the fastboot drivers onto my PC sooo....) I DON'T KNOW THE PROBLEM! Any help will be MUCH appreciated!!
Thanks a lot in advance!
AW: [Q] Can't enter fastboot mode in my Neo V...
You need working fast boot drivers to connect your phone.
Some people who had that problem tried if on another PC and there it worked. If you can you should try.
send from neo v with cm10 nightly on fusion kernel
motorazrv3 said:
You need working fast boot drivers to connect your phone.
Some people who had that problem tried if on another PC and there it worked. If you can you should try.
send from neo v with cm10 nightly on fusion kernel
Click to expand...
Click to collapse
Thanks for your answer. The problem is that the phone itself doesnt enter the fastboot mode (when I press menu key and plug the cable, the LED doesnt turn white/blue, just boots the phone normally). And I think I have installed the drivers correctly... I'll try another PC anyway, but from what I've read I've understood that if the LED doesnt turn blue/white, the PC drivers wont do anything.
AW: [Q] Can't enter fastboot mode in my Neo V...
I never had any problem to enter fast boot with my phone, so no personal experience from my side.
Were you able to enter fast boot mode before you got that trouble?
send from neo v with cm10 nightly on fusion kernel
makkea said:
Thanks for your answer. The problem is that the phone itself doesnt enter the fastboot mode (when I press menu key and plug the cable, the LED doesnt turn white/blue, just boots the phone normally). And I think I have installed the drivers correctly... I'll try another PC anyway, but from what I've read I've understood that if the LED doesnt turn blue/white, the PC drivers wont do anything.
Click to expand...
Click to collapse
you have to press and hold menu key while you connecting your cable.wait untill LED appear then release the key
I think his phone is Carrier locked and it needs to be SIM unlocked first!
I think it requires paying to unlock fastboot
Sent from my MT11i using xda premium
AW: [Q] Can't enter fastboot mode in my Neo V...
Yeah thats something I also thought. But he never mentioned that his phone is sim locked.
send from neo v with cm10 nightly on fusion kernel
makkea said:
Thanks for your answer. The problem is that the phone itself doesnt enter the fastboot mode (when I press menu key and plug the cable, the LED doesnt turn white/blue, just boots the phone normally). And I think I have installed the drivers correctly... I'll try another PC anyway, but from what I've read I've understood that if the LED doesnt turn blue/white, the PC drivers wont do anything.
Click to expand...
Click to collapse
Do you know that the phone needs to be Off ?
It can't boot to system while holding menu and plugging usb in !
I too am facing the same problem!
Im currently using CyanogenMod 10 with the same Kernel which was pre-installed on the Neo V when I bought it.
I wish to change the Kernel to Lupus as it is compatible with most of the ROMs. I tried flashing the kernel with Flashtools and Kernel Flasher but to no avail.
Kindly help!
same problem over here!
as TS I unlocked bootloader using testpoint, s1 tool says bootloader unlocked.
drivers correctly installed
but I cannot enter fastboot, tried several times
the phone is carrier locked (sim lock)
when i enter service menu (*#*#7378423#*#*), under service info>configuration, the rooting status is missing.
is there any possible solution to unlock the phone or bypass the simlock without paying for it (wotanserver)?
cheers
Model: MT15i
man i did in wotanserver
with 8 buck i unlock my xperia neo and simlock unlocked i very quick just one minute do it with wotanserver is safe and quick u have to download de xunlock tool for u pone instalit in pc u need a test point and youre done my pone is very Brand new now i do not have bootloop because i enter in recovery presing vol down buton cheers mate

Unbrick a zopo zp950+ (maybe other mt6589 phones too)

HOW TO UNBRICK A ZOPO ZP950+
After spending some time on Russian forums I found a way to un-brick my device.
Hopefully this will be useful to other people as well .
You will need:
1. SP Flash Tool - ATTACHED
2. preloader.bin from another simillar MT6589 ROM (I used the one from the latest official Iocean X7 ROM) - PRELOADER
3. Latest JB 4.2.1 from Zopo - ZOPO 4.2.1 ROM - http://zopomobile.com/xiazai.php
4. MT6589 drivers - ATTACHED
STEPS:
1. Install the MT6589 drivers on your WINDOWS computer
2. take the battery out of your phone and connect the USB cable, windows should install the required drives. Disconnect the phone
3. Start SP Flash and select the scatter file from the archive you have downloaded
4. DESELECT EVERYTHING except PRELOADER
5. Click on PRELOADER and browse to the newly downloaded PRELOADER_UNBRICK file
6. Click on Download and ignore the message
7. Now, this is very important, while holding the VOLUME + button connect the USB to the phone, do not let go of the VOLUME + button, hold it until the SP FLASH process finishes, mine took about a couple of minutes, while the process bar went to 100% RED and then through a PURPLE if I remember correctly. Only let go of the VOLUME + when you see the last GREEN CIRCLE. ( IF SP FLASH CAN'T SEE THE PHONE WHEN YOU PLUG THE USB, STILL HOLDING THE VOLUME + BUTTON, INSERT THE BATTERY - THE PROCESS IS THEN THE SAME)
8. Now, if this went OK, you should have a brand new working preloader on your phone
9. Disconnect the cable from the phone and Restart SP Flash Tool
10. Same steps as before, select the scatter file, but now DESELECT the PRELOADER
11. click on DOWNLOAD and ignore the message
12. With the battery out reconnect the USB cable to the phone, if the flashing process doesn't start, insert the battery and the flashing process will start. It will take a good few minutes, but you should be OK.
13. DO NOT TAKE THE BATTERY OUT AFTER THE FLASHING PROCESS HAS FINISHED, JUST DISCONNECT THE USB CABLE AND PRESS THE POWER BUTTON
14. FINGERS CROSSED YOUR UNBRICKED DEVICE IS NOW POWERING
GOOD LUCK!
I AM NOT RESPONSIBLE FOR ANY DAMAGE THIS PROCESS MIGHT CAUSE TO YOUR DEVICE.THIS PROCESS MIGHT WORK WITH OTHER MT6589 DEVICES
Did this help you? Please feel free to leave a comment below. I'll try and help as much as I can.
Hi and thanks for the guide,
I just did the steps and my ZP980 2gb does flash preloader and then the rest of the rom, when i boot up its dead.
So flashing works but thats just about it.
No indication that its loading either...
Hi, did you follow the steps exactly? Also, I think you should try flashing a preloader from a Zopo C2.
Sent from my Nexus 4 using Tapatalk 2
punkthemonk said:
Hi, did you follow the steps exactly? Also, I think you should try flashing a preloader from a Zopo C2.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I flashed the phone again and used another usb cable, i Flashed preloader from "ZP980 SET 130818 B vers" holding volume up.
Restarted spflash and did the same procedure according to the guide by holding volume up but this time without the preloader and same scatter "ZP980 SET 130818 B vers" worked perfectly!
The phone is alive!
Super. I'm glad it worked.
Sent from my Nexus 4 using Tapatalk 2
Zeggi said:
I flashed the phone again and used another usb cable, i Flashed preloader from "ZP980 SET 130818 B vers" holding volume up.
Restarted spflash and did the same procedure according to the guide by holding volume up but this time without the preloader and same scatter "ZP980 SET 130818 B vers" worked perfectly!
The phone is alive!
Click to expand...
Click to collapse
Hi Zaggi,
I've faced the same problem with my ZP980-32GB and I try to follow your steps. Unfortunately, it's still does not success. For how long do you have to wait for the 100 % violet strip and Green circle in each time ?
apinun_po said:
Hi Zaggi,
I've faced the same problem with my ZP980-32GB and I try to follow your steps. Unfortunately, it's still does not success. For how long do you have to wait for the 100 % violet strip and Green circle in each time ?
Click to expand...
Click to collapse
It sounds like you need to try another USB cable or another port on your computer.
Are you sure you installed the drivers?
And BTW the phone has to be off, I did the steps with my battery connected.. Hope it helps.
Sorry for the late reply.
Skickat från min GT-I9300 med Tapatalk 4
Found your guide. I have the same issue with Jiayu G4 Advanced. I didn't flashed any rom, but suddenly yesterday the phone stopped to responding. I removed the battery and after put it back the phone switched on but stuck on Jiayu logo for minutes. Battery was charged.
I've noticed on windows device manager that there's no MTK Preloader Driver, only DA and USB PORT.
So I cannot revive my phone with this method. It's a hardware issue then.
eamelas said:
Found your guide. I have the same issue with Jiayu G4 Advanced. I didn't flashed any rom, but suddenly yesterday the phone stopped to responding. I removed the battery and after put it back the phone switched on but stuck on Jiayu logo for minutes. Battery was charged.
I've noticed on windows device manager that there's no MTK Preloader Driver, only DA and USB PORT.
So I cannot revive my phone with this method. It's a hardware issue then.
Click to expand...
Click to collapse
I have your identical problem with the same phone and i'm trying to find a solution too...
I know this is an old post, but did you find anything to it? something that can help me too?
My device does not turn on and only recognizes the USB PORT Single driver, when I try to use the flash this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The above procedure works for this error?
Oh God... My Zopo ZP950+ broken the Power, Vol+ and Vol- buttons, and NOW? What I will do? Please, help me!!!!
He saved my smartphone. Thank you very much.
P.S .: using google translator
Thank you!!!!
I used your method - had to do it a few times over but succeeded at last.
However I had used a few files from the backup i had taken of my phone before it was dead.
Thank you!
P.S. I used this method to unbrick my QMobile Noir Quatro Z4.
http://forum.xda-developers.com/showthread.php?t=3285608
stuck at the preloader step
Hello,
Im trying to unbrick my ZP950+, but im stuck at the preloader step!
I flashed the preloader form the latest official Iocean X7 ROM, as you said and i got the green circle! All good
But the i keep getting 4032 error for the rooms that i download from the zopomobileshop!
Can anyone help me?
Thanks
Pedro

Phone dead after installing ROM - Elephone p9000

Hello,
Today I downloaded a few stock roms and I installed them with SP flash tool smoothly without any issue. In the end I installed again the latest stock rom but this time my phone went dead, the screen is black and my pc doesn't recognise the device.
Also, I opened the cover and removed the battery without any luck.
Please help me! :'(
Revert to old one. I saw some reports on elephone p9000 customer forums. always update the official way!
This happened to me once when flashing the ROM on the P9000, luckily though I just held the power button continuously for about 5 mins and it powered up. I guess if it wont power up, its an Elephone warranty issue to get it repaired
I let it overnight with the battery unplugged and somehow SP flash managed to recognise it and installed a new ROM.
Thank you guys for all the replies!
Hi!
I did live the same situation, and this happened to me when I flashed a custom ROM with the preloader that comes with it.
I suggest you to download a complete official Stock Rom and try to flash it with SP Flashtool by forcing the MT65XX Preloader status.
For this you need to be sure that your phone is completely OFF.
Just start SP Flashtool load the scatter file that comes with the Stock ROM archive and let everything ticked as it is by default (preloder file too) and click on the Download button.
Let the downlaod option to be set as "Download Only" and click on the "Download" button with the green arrow.
At this step, SP Flashtool should be waiting for your phone to be connected.
With your phone completely OFF, connect the USB cable on the phone keep the Vol - button pressed and connect the other side of the cable to the computer.
If everything's OK, the computer should recognize the phone as an MT65XX Preloder device and SP Flashtool will launch the flashing process.
Wait till the end when the OK checkbox pop-up appear and your phone should rework as usual.
Tell us if this method helped you and give us some feedback if you need more support.
Good luck.
hi, may i know how can i force mt65xx preloader status
djelloul said:
Hi!
I did live the same situation, and this happened to me when I flashed a custom ROM with the preloader that comes with it.
I suggest you to download a complete official Stock Rom and try to flash it with SP Flashtool by forcing the MT65XX Preloader status.
For this you need to be sure that your phone is completely OFF.
Just start SP Flashtool load the scatter file that comes with the Stock ROM archive and let everything ticked as it is by default (preloder file too) and click on the Download button.
Let the downlaod option to be set as "Download Only" and click on the "Download" button with the green arrow.
At this step, SP Flashtool should be waiting for your phone to be connected.
With your phone completely OFF, connect the USB cable on the phone keep the Vol - button pressed and connect the other side of the cable to the computer.
If everything's OK, the computer should recognize the phone as an MT65XX Preloder device and SP Flashtool will launch the flashing process.
Wait till the end when the OK checkbox pop-up appear and your phone should rework as usual.
Tell us if this method helped you and give us some feedback if you need more support.
Good luck.
Click to expand...
Click to collapse
Install from ota. It is available there now
Hi Zamarano.
I've explained how to force the pre loader status in my preceding message....
But maybe you did not understand how it is written...
To go in this mode, you have to follow carefully all the step above until you press the download button in SP flashtool.
At this stage, the computer is waiting for you to plug your phone.
You need to be sure your phone is completely OFF.
After this keep the Vol- (Volume Down) button pressed but do not switch ON your phone, and connect your USB cable to your phone first and in the USB port of your computer in second time.
If you follow these step, the download process must begin automatically.
You can remove your finger from the Vol- (Volume Down) button when the download process has begun.
I hope these advices will help you.
The following fix worked on my dead Elephone P9000 (thanks to djelloul) ; and good luck.:
Download the Stock Rom (or the Aerom v5 Rom which I used) and extract it afterwards...
(MTK drivers should be working ok on you pc (google it if needed)).
Phone must be completely OFF en unplugged to pc.
Start SP Flashtool load the correct scatter file that comes with the ROM and let everything ticked as it is by default (preloder file too! forcing the MT65XX Preloader status).
Let the download option to be set as "Download Only" (Note that the "Download only" did not work for me. So I used "Format All + Download" option. Be careful here because everything will be deleted!)
Now click on the "Download" button with the green arrow.
At this step: SP Flashtool should be waiting for your phone to be connected.
With your phone completely OFF, attach the USB cable to the phone, then push the VOL+ button and hold it down, then connect the USB cable to the computer.
If everything's OK, the computer should recognize the phone as an MT65XX Preloder device and SP Flashtool will launch the flashing process. Wait till the end when the OK checkbox pop-up appear and your phone should rework as usual.
Unplug the phone and close the SP Flashtool.
Plug the phone again to the pc and wait...
Now the phone seems alive again, and the led lamp will light up. The phone will show for a second a strange battery icon, and then goes off again.
The battery is probably dead by now. Wait to charge the battery and be patient.
After +/- 20 minutes the battery is strong enough to turn the phone on.
Hope this will work for you. Tell us if this method helped you and so we can help othes who have this same problem.
Good luck.
...
Good night, after a week of phone dead to, and several attempts to revive, I hereby thank all the participants in my odyssey, and I come to say that I could install the V5 rom and that the phone is fully functional for now everything works fine .... but only with some use I can say fully ..... Thank you all .....
Enviado do meu SHIELD Tablet K1 através de Tapatalk
zwolle23 said:
The following fix worked on my dead Elephone P9000 (thanks to djelloul) ; and good luck.:
Download the Stock Rom (or the Aerom v5 Rom which I used) and extract it afterwards...
(MTK drivers should be working ok on you pc (google it if needed)).
Phone must be completely OFF en unplugged to pc.
Start SP Flashtool load the correct scatter file that comes with the ROM and let everything ticked as it is by default (preloder file too! forcing the MT65XX Preloader status).
Let the download option to be set as "Download Only" (Note that the "Download only" did not work for me. So I used "Format All + Download" option. Be careful here because everything will be deleted!)
Now click on the "Download" button with the green arrow.
At this step: SP Flashtool should be waiting for your phone to be connected.
With your phone completely OFF, attach the USB cable to the phone, then push the VOL+ button and hold it down, then connect the USB cable to the computer.
If everything's OK, the computer should recognize the phone as an MT65XX Preloder device and SP Flashtool will launch the flashing process. Wait till the end when the OK checkbox pop-up appear and your phone should rework as usual.
Unplug the phone and close the SP Flashtool.
Plug the phone again to the pc and wait...
Now the phone seems alive again, and the led lamp will light up. The phone will show for a second a strange battery icon, and then goes off again.
The battery is probably dead by now. Wait to charge the battery and be patient.
After +/- 20 minutes the battery is strong enough to turn the phone on.
Hope this will work for you. Tell us if this method helped you and so we can help othes who have this same problem.
Good luck.
Click to expand...
Click to collapse
Hey mate, I need help. I believe my P9000 Lite is hard bricked because the LCD does not light up at all. The battery was fully charged so I don't know why the screen isnt lit up. I flashed 20160315 Rom and this was the result. No longer got a responsive screen. I took out the battery and put it back in and still no luck. Any feedback would be appreciated. Thanks
Same problem here and have tried every solution previously mentioned
I have a hard bricked Elephone p9000 does not turn on and has no working buttons. Have fallowed many tutorials on how to fix but all keep ending in the same result*BROM ERROR : STATUS_EXT_RAM_EXCEPTION (0xC0050005) I have fallowed instructions and have tried to flash just the preloader, I have tried to format, I have tried to firmware upgrade I have tried every option the sp flash tool offers all met with the same result**BROM ERROR : STATUS_EXT_RAM_EXCEPTION (0xC0050005) when i look online it tells me to try a different port but i have been trying to fix this at least*a little*BROM ERROR : STATUS_EXT_RAM_EXCEPTION (0xC0050005). I am using the test point on the circuit board to get the PC to recognize the phone and it attaches and detaches over and over but if i hit download on the flash tool it starts and goes to 100% on the first red bar but can not get it to go past that no matter what i try holding vol up or down when plugging in makes no difference**??? IDK what im doing wrong?
* I am trying to flash the original stock rom from Elephone web page. Can someone help me out please ? Thanx*advance**
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

S3 Won't Recognized via USB Connect

Im flashing Stock Rom via Mobile Odin after my phone soft bricked. No recovery, only download mode. I phone connect to pc.... Error mesage " USB Device not recognized " Code 43
When I want to turn on the phone, the blue logo appears. It's always restarting again.
Sorry for my bad english.
Please help
Karansa22 said:
Im flashing Stock Rom via Mobile Odin after my phone soft bricked. No recovery, only download mode. I phone connect to pc.... Error mesage " USB Device not recognized " Code 43
When I want to turn on the phone, the blue logo appears. It's always restarting again.
Sorry for my bad english.
Please help
Click to expand...
Click to collapse
Wipe your data and then try......you phone will boot up.......
Sent from my SM-A710F using Tapatalk
Karansa22 said:
Im flashing Stock Rom via Mobile Odin after my phone soft bricked. No recovery, only download mode. I phone connect to pc.... Error mesage " USB Device not recognized " Code 43
When I want to turn on the phone, the blue logo appears. It's always restarting again.
Sorry for my bad english.
Please help
Click to expand...
Click to collapse
Install USB drivers of your android in computer.
AshTechsoft said:
Wipe your data and then try......you phone will boot up.......
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
Thanks for reply, no boot recovery only download mode
Karansa22 said:
Thanks for reply, no boot recovery only download mode
Click to expand...
Click to collapse
Install your USB drivers in PC then PC recognizes your USB device. Then flash stock rom using Odin in download mode.
Karansa22 said:
Thanks for reply, no boot recovery only download mode
Click to expand...
Click to collapse
Install latest samsung usb driver:-
Here is the link of latest driver:-
http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
Install this driver then try to connect your phone with pc in download mode.......
Sent from my SM-A710F using Tapatalk
AshTechsoft said:
Install latest samsung usb driver:-
Here is the link of latest driver:-
Install this driver then try to connect your phone with pc in download mode.......
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
I try it. Not fix
The first connection was no problem, then I always get this error
Karansa22 said:
I try it. Not fix
The first connection was no problem, then I always get this error
Click to expand...
Click to collapse
Try to connect in other PC.......[emoji335]
Sent from my SM-A710F using Tapatalk
AshTechsoft said:
Try to connect in other PC.......[emoji335]
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
I also tried 4 computers. My computer also recognized it, but the odin an error. " Get pit for mapping file"
Com3 Added stock rom flashing. Stuck at error message... After usb re-connection always received not recognized error
Karansa22 said:
I try it. Not fix
The first connection was no problem, then I always get this error
Click to expand...
Click to collapse
http://www.online-tech-tips.com/computer-tips/usb-device-not-recognized/
Try these solutions. It may help you.
Karansa22 said:
I also tried 4 computers. My computer also recognized it, but the odin an error. " Get pit for mapping file"
Com3 Added stock rom flashing. Stuck at error message... After usb re-connection always received not recognized error
Click to expand...
Click to collapse
Give me the screenshot of your error and odin logs....
Then I'll do something for you
AshTechsoft said:
Give me the screenshot of your error and odin logs....
Then I'll do something for you
Click to expand...
Click to collapse
http://i.hizliresim. com/1Vgd25.jpg delete space
Karansa22 said:
http://i.hizliresim. com/1Vgd25.jpg delete space
Click to expand...
Click to collapse
I want first screenshot from your computer while flashing via odin
And
Second screenshot also from computer when it was not recognize your device.
(You can take screenshot in windows computer by pressing "windows key" + "printscr key" together of keyboard...)
Sent from my SM-A710F using Tapatalk
AshTechsoft said:
Give me the screenshot of your error and odin logs....
Then I'll do something for you
Click to expand...
Click to collapse
Now not recognized usb odin logs not see
Same error win8.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AshTechsoft said:
I want first screenshot from your computer while flashing via odin
And
Second screenshot also from computer when it was not recognize your device.
(You can take screenshot in windows computer by pressing "windows key" + "printscr key" together of keyboard...)
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
Help me
Help
Karansa22 said:
Help
Click to expand...
Click to collapse
Download windows USB troubleshooter and run on your PC.
Ashwinrg said:
Download windows USB troubleshooter and run on your PC.
Click to expand...
Click to collapse
Thanks for help, I try it.
Only Dedected text message, dont fix problem
Karansa22 said:
Thanks for help, I try it.
Only Dedected text message, dont fix problem
Click to expand...
Click to collapse
Go to device manager. Under USB delete all USB drivers with yellow exclamation mark. Click on properties then go driver tab and click on uninstall and tick on delete driver and uninstall.
Restart your PC and see.

[HELP] I seem to have bricked my Moto G Power and not it's stuck on bootloader.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what it looks like, and if I try to boot into recovery or system it just says "no operating OS found."
Windows won't recognize it when trying to connect via USB.
Any way to fix this? Help would be greatly appreciated.
DustyFukuyama said:
View attachment 5759871
This is what it looks like, and if I try to boot into recovery or system it just says "no operating OS found."
Windows won't recognize it when trying to connect via USB.
Any way to fix this? Help would be greatly appreciated.
Click to expand...
Click to collapse
It's in fastboot mode. Have you tried using a different cable to connect to the PC? It must be a USB data cable. Also, have you downloaded the Motorola driver's on your PC and the latest driver's for adb/fastboot from Google? Another option is if you have another phone and a OTG adapter
Yeedatoy said:
It's in fastboot mode. Have you tried using a different cable to connect to the PC? It must be a USB data cable. Also, have you downloaded the Motorola driver's on your PC and the latest driver's for adb/fastboot from Google? Another option is if you have another phone and a OTG adapter
Click to expand...
Click to collapse
fsr I can't install Motorola USB Driver. It always says "the parameter is incorrect" when I do it, and I've tried all kinds of solutions to fix it. I'll try install it on my friend's laptop tonight and see if I can fix it there.
Yeedatoy said:
It's in fastboot mode. Have you tried using a different cable to connect to the PC? It must be a USB data cable. Also, have you downloaded the Motorola driver's on your PC and the latest driver's for adb/fastboot from Google? Another option is if you have another phone and a OTG adapter
Click to expand...
Click to collapse
So I successfully installed the Universal ADB Driver and Motorola USB Driver on my other computer and it still won't recognize my phone while in the fastboot mode. Any idea why this is the case?
DustyFukuyama said:
So I successfully installed the Universal ADB Driver and Motorola USB Driver on my other computer and it still won't recognize my phone while in the fastboot mode. Any idea why this is the case?
Click to expand...
Click to collapse
Make sure to install these. They were updated. Then, go to device manager on your PC, click add new drivers and manually find the location of all new drivers and make sure they install. Make sure the phone isn't plugged into the PC when you do this. Reboot the pc. When it boots, plug the phone in but not in fastboot. See if it will get discovered in regular adb. If still nothing, click update drivers manually and the option to choose which. Go to Google adb, click install. Try again
DustyFukuyama said:
So I successfully installed the Universal ADB Driver and Motorola USB Driver on my other computer and it still won't recognize my phone while in the fastboot mode. Any idea why this is the case?
Click to expand...
Click to collapse
I forget you're stuck in fastboot. Can you get it to boot into recovery? It will just show a green android logo with it's stomach opened up and say invalid command or some ****. Hold power and press either volume up or down until you see a new screen that has several other options... That's recovery. From there you can enter fastbootd. See if the pc recognizes fastbootd if you can't get the above solution to work. Also, you can avoid all this driver crap if you have another phone and an otg cable. Download Bugjaeuger adb from Google play and you can use the second device as a replacement for the PC
Yeedatoy said:
I forget you're stuck in fastboot. Can you get it to boot into recovery? It will just show a green android logo with it's stomach opened up and say invalid command or some ****. Hold power and press either volume up or down until you see a new screen that has several other options... That's recovery. From there you can enter fastbootd. See if the pc recognizes fastbootd if you can't get the above solution to work. Also, you can avoid all this driver crap if you have another phone and an otg cable. Download Bugjaeuger adb from Google play and you can use the second device as a replacement for the PC
Click to expand...
Click to collapse
So I solved the problem last night. Apparently, it was the USB cable. My PC won't recognize my phone in fastboot mode using this particular cable fsr. I never thought it was the faulty cable because it was working fine in Recovery and OS prior to brick, just not in fastboot. Thanks for the help, I really appreciate it!
DustyFukuyama said:
So I solved the problem last night. Apparently, it was the USB cable. My PC won't recognize my phone in fastboot mode using this particular cable fsr. I never thought it was the faulty cable because it was working fine in Recovery and OS prior to brick, just not in fastboot. Thanks for the help, I really appreciate it!
Click to expand...
Click to collapse
That's Awesome! Isn't it such a great feeling when it finally works!? Lol. I've been a victim of the faulty/wrong cable situation many times. It's so frustrating I can't begin to explain it. I've had phones that were left inoperable for 6 months because I gave up, and then came back with a clear head and sure as hell, it ended up just needing a different cable, even though I had already tried 4 different ones. It makes me want to destroy things! Lol. Glad you got it running again!

Categories

Resources