I am looking for an ICS or GB ROM which has USB OTG enabled and confirm working. Can anybody help me out and point out a ROM for me please.
i have tried Leedroid GB ROM which has Changelog stating USB OTG enabled. but it does not work. no ICS ROM states OTG enabled. HELP!!
francisdsa said:
I am looking for an ICS or GB ROM which has USB OTG enabled and confirm working. Can anybody help me out and point out a ROM for me please.
Click to expand...
Click to collapse
There's a section on this forum for questions, it's called Q&A and it's not in here. Having said that, if you used the search option here you would've found out that there's no USB OTG kernel for Evo 3D reported working yet.
This belongs into Q&A!
Is this really that hard to understand?
edit: oh someone was faster ^^
derRobin said:
edit: oh someone was faster ^^
Click to expand...
Click to collapse
Ya thread reported.
thanks for the judging. but i needed an answer sooner as i am writing an article for a magazine and wanted a thorough answer. have been searching for all possible answers on the web and XDA. havent found a single. Leedroid reported in their latest versio about OTG enabled, but after testing it found not working. i made a OTG cable by shorting pins 4 and 5 and used it along with a USB hub. the only phone it worked on was the Sony Live with Walkman which has GB stock ROM. tried on HTC EVO 3d, Samsung Galaxy 3, Nokia Lumia, Motorola Defy and LG optimus one, but failed. i could get the keyboard and mouse working at the same time on the Sony. wanted it to work on my Evo 3D... any help would be appreciated.
Galaxy S II should have USB OTG support in Gingerbread. Galaxy S III should also have USB OTG support out of the box. I didn't have any luck in enabling USB OTG on the Evo 3D. Double check your cable, some of those phones should have USB OTG support.
Related
Hi,
Can anyone tell me if there should be any technical reason why the Flyer cant run on Honeycombe 3.1 and implement the usb host update so I can download jpegs from my dslr using usb.
Many thanks.
It might be worth trying it without honeycomb, I believe that Qualcomm chips have supported USB host since Eclair, perhaps HTC enabled it already?
Has anyone tried it yet?
I'd like to read some gps data from a SD card.
Thanks guys but needed a tablet asap which would also allow me to transfer files from my dslr via usb. Its been confirmed on other forums that the 3.1 update from Motorola will enable this so went with the Zoom
If you just need it for the DSLR have you considered an EyeFI card? For less than $100 you can get a direct connection from the camera to the tablet (or phone).
Dolmangar said:
If you just need it for the DSLR have you considered an EyeFI card? For less than $100 you can get a direct connection from the camera to the tablet (or phone).
Click to expand...
Click to collapse
I know, its a great solution but my D700 only uses CF cards which aren't currently supported.
anpictum said:
I know, its a great solution but my D700 only uses CF cards which aren't currently supported.
Click to expand...
Click to collapse
Yeah I have a D70 that's not supported either. I haven't gone and gotten one for my D60 yet although I've considered it a few times.
USB-host on Flyer
hi guys!
any news on this topic?
as there is already tmp root achieved and permanent root on s-off flyers, has anybody already tried to implement usb host functionality now?
I believe to have heard, that Honeycomb should support USB-host functionality automatically... Do we need to wait for 3.2, or could we get it earlier?
I'd really appreciate this (as I am also owning a DSLR from Canon), and would be willing to donate.
greets, alf.
Sure that the Flyer has the necessary chipset to work as a USB host?
Sent from HTC Flyer using Tapatalk
I'm actually working on a direct DSLR app using USB host, a preview of which should hopefully be released by the end of the week (alpha, not beta).
I'm mentioning this because it works on the Galaxy S2 with 2.3.4. I've not been able to get it to work on the Galaxy S1 with 2.3.4, but it just goes to show, it may not be 100% necessary to be running HC 3.1 to support it (as evidenced by the SGS2).
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
Either way, the chips themselves have supported it for years and years, that's not the issue. Kernel and framework support and such is the problem.
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
alf261173 said:
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
Click to expand...
Click to collapse
Test with a card reader or ext hd (powered) plugged to your cable and see if you get a new drive through a file explorer... The kernel will definitely need to support this functionality, or the fstab may need to be modified.
alf261173 said:
What kind of connection cable does the HTC Flyer have ? Micro USB ? If so, I'd advise to give the test app a spin when I release it if you happen to have a USB host cable.
yes, the flyer got a micro usb port.
I also happen to have the correct usb host cable (micro usb to usb-female...), so as soon as your software is out, I would give it a try.
please keep us informed, thx!
greets, alf
Click to expand...
Click to collapse
Indeed if you have a micro usb cable already, connect a usb stick, see if anything happens... that should tell you straight up.
of course I already tried different devices (USB-stick, hard drive, camera directly...), but there was absolutely no reaction ...
simply plugging it in doesn't work.
greets
Then it's probably lacking kernel and/or framework support.
is there a way to fix this with root?
any news on this matter?
Chainfire said:
Then it's probably lacking kernel and/or framework support.
Click to expand...
Click to collapse
Hi Chainfire,
have you looked into the Archos Gen8 range of tablets for any kernel info?
They utilise Froyo and have had USB host since day one. Maybe you could patch something from there?
H.
And what about porting the results for the SGT described here? http://www.xda-developers.com/andro...e-versatile-thanks-to-usb-host-functionality/
I can't wait. A Flyer with notes, the pen and USB host would be an fantastic tool for photography AND for any kind of fieldwork.
If you can take a photo with a proper camera and then check it on a flyer awesome display and use the pen... just imagine!
Sometimes I'm afraid that HTC did not bet enough hard for a fantastic device!
I just ordered my USB OTG Cable today. For those that don't know what it means, it stands for USB On-The-Go. Basically, it allows you to read files from a portable flash drive straight from your phone. This will only work with a compatable kernel and since we have an ICS Source the developers said it was already enabled within the kernel.
This will be my first time to have ever used one and I was just wondering the pros and cons of having something like this.
I need some feed back~~
well from my POV these are my pros and cons...
PROS:
Extra space (whatever you can get that hooks up to usb, 2tb!!)
CONS:
Lugging around the extra crap
You have a good con list ziggy46..lol
I was concerned about that as well. But I have a 500gb portable external hard drive and it has tons of crap that I can probably watch or listen to on my phone. I can't shove everything on my 32gb sdcard. My 1T sits on my desk for my wife's photography thing she does.
My friend has an OTG cable and he uses his usb mouse to control his phone.
It's pretty cool but really gimmicky.
Hmmm...interesting. Thanks for the tip
if your otg cable works out good for you let us know. i might buy one and get a 2tb usb hdd.
btw, if things are fomatted in NTFS you might need to make a script for them to mount to the phone...
HTC doesn't support USB OTG in general. It will require a kernel hack. It didn't work in GB. I am not sure about ICS.
From what kozmick mentioned in his kernel thread it was enabled in the kernel. Im hoping it works if not then I hope it works on the N7 or my wife's SGS2.
crazypotato said:
HTC doesn't support USB OTG in general. It will require a kernel hack. It didn't work in GB. I am not sure about ICS.
Click to expand...
Click to collapse
There are things enabled in ics kernel that are not in gb kernel. 2 way call recording is one example.
Sent from my HTC_Amaze_4G using xda app-developers app
I still have my OTG cable from my Nokia N8. I wonder if it will work..
Normally USB otg won't work on an HTC device. According to faux its something about the USB stack.
Ok. So I FINALLY got my USB-OTG Cable and even with the enabeled kernel it does not work. Kinda bummed but the part was cheap so its not a major loss. It works on ky wife's SGS2 and I read that it will work on the Idolian tablet I just ordered so I'm cool with that. I'll try and sell the other 3 that I won't need.
Double0EK said:
Ok. So I FINALLY got my USB-OTG Cable and even with the enabeled kernel it does not work. Kinda bummed but the part was cheap so its not a major loss. It works on ky wife's SGS2 and I read that it will work on the Idolian tablet I just ordered so I'm cool with that. I'll try and sell the other 3 that I won't need.
Click to expand...
Click to collapse
Just wondering, for the usb otg on the sgs2, did you need to connect the ext hd with power source? Or is the sgs2 able to power the ext hd?
It was able to power it just fine. I was just using a 2GB flash drive to test and you can see the led light come on. Not sure how well it could keep the charge up tho.
F033x said:
Normally USB otg won't work on an HTC device. According to faux its something about the USB stack.
Click to expand...
Click to collapse
I think it doesn't work with the custom kernels, but I believe the stock kernel supports it
Sent from my HTC_Amaze_4G using xda app-developers app
masondoctorjt said:
I think it doesn't work with the custom kernels, but I believe the stock kernel supports it
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
That's interesting. I'll test it in a few.
Double0EK said:
That's interesting. I'll test it in a few.
Click to expand...
Click to collapse
Whoa, let us know if it work with any kernel that you tried. I've been itchin trying usb otg
I would like to see this working on our phone. Seems pretty damn useful.
Anyone find a solution because before stumbling upon this thread I actually bought one as well but only for .99.
Sent from my HTC Ruby using xda premium
does any kernel support OTG on Amaze?
i have one as well and i want to hook up my PC joystick on my phone.
i have Energy Rom with Faux kernel, but i doesn't work.
my friend has One S, which works fabulously with OTG.
any solutions?
Hi guys, I got an oem MHL to hdmi cable from eBay, one specifically for the galaxy s3.
I received it today and while the phone seems to detect it's attached to a screen (audio set to hdmi out, landscape mode), the two devices I can connect it to both register nothing connected.
Is there something missing? The first device is a monitor using a hdmi to dvi adapter, the second is a 720p tv with hdmi in. The tv allows me to select the hdmi it's plugged into but says there's no signal.
Does anyone have any ideas?
KramitDfrog said:
Hi guys, I got an oem MHL to hdmi cable from eBay, one specifically for the galaxy s3.
I received it today and while the phone seems to detect it's attached to a screen (audio set to hdmi out, landscape mode), the two devices I can connect it to both register nothing connected.
Is there something missing? The first device is a monitor using a hdmi to dvi adapter, the second is a 720p tv with hdmi in. The tv allows me to select the hdmi it's plugged into but says there's no signal.
Does anyone have any ideas?
Click to expand...
Click to collapse
maybe the adapter does not work with the S3 after all.
Maybe you will find some solution in the accessories threat or here
Can you post up the link to the advert you bought it from?
chrismast said:
maybe the adapter does not work with the S3 after all.
Maybe you will find some solution in the accessories threat or here
Click to expand...
Click to collapse
Thanks. I think it should work, the item description is pretty clear.. http://item.mobileweb.ebay.com.au/viewitem?itemId=200829302467
I might see if I can test it on some more tvs. There was a suggestion it may not work with a 720p device.
Sad thing is, they're all Samsung screens.
Are you powering the device from another USB port.
All MHL adapters and cables for the Galaxy S2/3 need to be powered by an external USB port.
Simonetti2011 said:
Are you powering the device from another USB port.
All MHL adapters and cables for the Galaxy S2/3 need to be powered by an external USB port.
Click to expand...
Click to collapse
Yep, powered by an external wall adapter.
KramitDfrog said:
Yep, powered by an external wall adapter.
Click to expand...
Click to collapse
Ok it looks like it might be an issue with the ROM, using an AOKP build of JB 4.1.2
Apparently it doesn't support the TV out - shame, I thought I'd finally found the ROM I was going to stick with
Does anyone know a way of getting it working under AOKP?
sorry man, but only on stock roms you can use tv-out. At least for now, lets hope the sources promised for november include mhl tv-out propietary driver from samsung.
optimuschile said:
sorry man, but only on stock roms you can use tv-out. At least for now, lets hope the sources promised for november include mhl tv-out propietary driver from samsung.
Click to expand...
Click to collapse
Thanks man - I might go to omega's stock-based rom and see if I can get any love with that. Cheers for the help everyone
Edit: For anyone finding this by search later, using a stock ROM does fix the issue. God I can't wait to go back to AOKP though, stock is terrible
I gotta bring this up again... i had same issues when i was on aokp roms. But now.. 4 samsung roms and numerous kernels later i cant get the MHL to work! It did work like 6months ago when i was on a sammy rom, but ever since I flashed the aokp rom once I can't get the cable work again :/ any ideas? My friend just tested the cable on note2 and the cable is fine. Pls help?
Sent from my GT-I9300 using Tapatalk 2
So no1 can help me? :/ i really got no clue what to do
Sent from my GT-I9300 using Tapatalk 2
th3g0d said:
I gotta bring this up again... i had same issues when i was on aokp roms. But now.. 4 samsung roms and numerous kernels later i cant get the MHL to work! It did work like 6months ago when i was on a sammy rom, but ever since I flashed the aokp rom once I can't get the cable work again :/ any ideas? My friend just tested the cable on note2 and the cable is fine. Pls help?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
If you get the cheap ones there's a huge chance of it not working just from looking through feedback on the Internet. Just spend a bit extra and get a samsung one.
Ive tried mine on many different roms and kernels and it always works.
P.s has anyone managed to get netflix in 16.9 widescreen using the mhl adaptor on jelly bean?:crying:
It's the samsungs 1, that i bought from my carrier. And adapter is fine since my friend got it work with note 2 :/
Sent from my GT-I9300 using Tapatalk 2
th3g0d said:
It's the samsungs 1, that i bought from my carrier. And adapter is fine since my friend got it work with note 2 :/
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Have you guys get this MHL feature enabled on AOKP roms?
I'm currently running Slimbean 4.2.2 and I have no MHL
eboosted said:
Have you guys get this MHL feature enabled on AOKP roms?
I'm currently running Slimbean 4.2.2 and I have no MHL
Click to expand...
Click to collapse
You never will have it working.stock or bust!
So i was wondering if this OTG cable will work on my dorid razr for connect things such as a ps3 contoll or keyboard. http://www.ebay.com/itm/New-Micro-U...513597?pt=PDA_Accessories&hash=item19d56784bd thanks in advance
I've been wondering the same....
From what I understood from this thread: http://forum.xda-developers.com/showthread.php?t=1349038
You need to the OTG cable, plus an external power source, plus a usb hub?..
I don't know if using this one:
http://www.ebay.com/itm/Micro-USB-H...970640?pt=PDA_Accessories&hash=item2577ef70d0
Or the one you posted would work....
Anyone? A little help here please.
Olao99 said:
I've been wondering the same....
From what I understood from this thread: http://forum.xda-developers.com/showthread.php?t=1349038
You need to the OTG cable, plus an external power source, plus a usb hub?..
I don't know if using this one:
http://www.ebay.com/itm/Micro-USB-H...970640?pt=PDA_Accessories&hash=item2577ef70d0
Or the one you posted would work....
Anyone? A little help here please.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1349038&page=7
I asked the same question is other threads but I had no answer.......could anyone tell me if MHL is possible in custom roms (specifically in pie editions). I have a cable and couldn't manage to connect my phone in the TV (USB debugging is open)....
One plus x does not support MHL.
ashwany.yadav said:
One plus x does not support MHL.
Click to expand...
Click to collapse
https://www.gsmarena.com/one_plus_x-review-1337p3.php
peri133 said:
https://www.gsmarena.com/one_plus_x-review-1337p3.php
Click to expand...
Click to collapse
First try MHL with stock ROM and see if it works.
It could work with an active MHL adaptater (11 pins)
I saw people telling it was compatible, but no confirmation of having it working...