Hi,
I recently bought Samsung Galaxy S II I9100 on ebay. After receiving it I realized that it has a custom ROM installed on it. Now I cannot update my Galaxy SII using Kies. So, I decided why not flash it to stock ICS firmware.
as fas as I understand I need to flash my phone using ODIN with a stock ICS firmware (I choose the first one from Nordic countries from http://forum.xda-developers.com/showthread.php?t=1544487 ).
Now what if I think of rooting it ? I mean I want to unlock super user privileges. As far as I understand I choose SiyahKernel v3.2.7.2 (from http://www.gokhanmoral.com/gm/). Just like the way I flashed using ODIN. I repeat it with this .tar file from SiyahKernel v3.2.7.2. Is that it ?
Can anyone verify it ?
Yes, but you should flash CF-Root kernel first (after flashing stock ROM).
If not satisfied with this, then you can try Siyah...
thanks for your reply. What is the difference between Chain Fire and Siyah ? I tried to look for differences ... couldn't find any .. CyanogenMod has a lot of documentation... in fact it is kinda scary (with some of its security problems)..
satish1986 said:
thanks for your reply. What is the difference between Chain Fire and Siyah ? I tried to look for differences ... couldn't find any .. CyanogenMod has a lot of documentation... in fact it is kinda scary (with some of its security problems)..
Click to expand...
Click to collapse
hey ma8 first try to understand everything about root and recovery then try to implement the same
ps- also for rooting ur phone after flashing stock ics rom please check the link below
http://forum.xda-developers.com/showthread.php?p=20075898#post20075898
There is almost no visible diffrences between kernels. at least in normal mode.(siyah has its own CWM, way better than other CWM versions).
Siyah Kernel eliminates some of logging processes and unusefull procedures of android, so it gives you better battery life. specially in idle mode.(about 1 percent for 7-8 hour) and I feel CF-kernels are more battery consuming than stock kernels.
Also Siyah gives you advanced control over hardware, and has a dual boot option.(two different ROM of same version. both ICS or both GB). for best results you should download EX Tweaks from market.
satish1986 said:
thanks for your reply. What is the difference between Chain Fire and Siyah ? I tried to look for differences ... couldn't find any .. CyanogenMod has a lot of documentation... in fact it is kinda scary (with some of its security problems)..
Click to expand...
Click to collapse
CF-Root kernel from Chainfire is only a rooted stock kernel with a few extras (such as SuperSU, BusyBox, CWM recovery, CWM Manager app, etc.).
Have a look at CF-Root thread for detailed information => http://forum.xda-developers.com/showthread.php?t=1103399&highlight=CF+Root
SiyahKernel from gokhanmoral is completely different, as it is a custom kernel with a lot of patched, parts from other kernels/linux sources/other phones/individually developed code/etc.
See corresponding thread for further information => http://forum.xda-developers.com/showthread.php?t=1555259
If you want to stay "stock" but rooted, then flash the corresponding CF-Root kernel for your stock ROM.
Happy flashing !
P.S.: Use TriangleAway app from Chainfire to remove the yellow triangle and reset the counter after flashing an insecure kernel, such as CF-Root or Siyah.
And as soon as your phone is rooted, you can use Mobile Odin app from Chainfire to flash stock ROMs, kernels and other part of the firmware with an on-device app - without the yellow triangle and without increasing the counter.
CF kernels are STOCK kernels, only with root access.
Syiah, Speedmod and others are developed as new kernels with special properties - adjustable voltage and over- under- clocking... also there is a greater risk of them being unstable
all of this makes me scared .. but, I want to take that leap ... sounds geeky to me..
As long as you understand the process of whatever you're going to do to your phone & follow instructions to the letter you should be fine.
If you don't understand exactly what it is you're going to do to your phone, don't do anything until you do.
Related
I've been doing this whole "reading" thing about flashing and all that, but some confusion is still there.
I have rooted my newly got SGS2 (i9100, UK).
Now what ? I'm looking at Darky's rom, but there are two files to flash separately: kernel (darkcore1.7) and ROM itself.
1. I was just wondering what is kernel in this situation ? Can i keep my current kernel, which was flashed by superoneclick(2.1.1) or do i absolutely need to flash darkcore ?
2. Same question applies to any other rom out there - can i use different kernel to the rom i may want to flash ? A lot of them come in sets (rom+kernel)
3. Another question - if i mess up kernel flash somehow, does that kill "download mode" of the phone (voldn+pwr)?
I have SGS1 flashed just another day, due to it being "expendable" now that i have SGS2, so jumped in and flashed it following instructions, but without solid understanding. Either stuff gets too complicated or i'm getting too old for this **** (I do have a background of messing with PCs, videogame consoles (ps1 era to ps3/360), winmo6 phones, gadgetry in general...engineer at heart )
You can use any kernel with any ROM. And no I don't think your Download Mode will be gone if you mess up a Kernel.
Kernel don't come in sets. You can choose your favorite there. See Dev section for more details.
Regards.
Correction: SuperCore, not darkcore...
Can i use cwm app (v2.0)to flash any kernels ? Or does it have to be odin ?
sliex said:
Correction: SuperCore, not darkcore...
Can i use cwm app (v2.0)to flash any kernels ? Or does it have to be odin ?
Click to expand...
Click to collapse
Rom>>That depends upon the instructions as always in the rom you choose for a custom rom .
Kernel is flashed via Odin Via CWM app or via CWM recovery .
Kernel is the core of the system between hardware and operating .
jje
Ok, so saying that, What stock Kernel can I use for Cyanogenmod7 ROM?
I was using "XWKE7" previously.
The ZIP file that i downloaded actually replaced my kernel with its own.
I'm asking this as I wanna use Tegrak overclock which is only compatible with stock kernels.
Rjmcgauley said:
Ok, so saying that, What stock Kernel can I use for Cyanogenmod7 ROM?
I was using "XWKE7" previously.
The ZIP file that i downloaded actually replaced my kernel with its own.
I'm asking this as I wanna use Tegrak overclock which is only compatible with stock kernels.
Click to expand...
Click to collapse
Stock kernels will not work with cyanogenmod. There are no overclockable kernels available for it yet.
Sent from my GT-I9100M
Hello everyone, I've decided to root my gs2, and I'm currently undecided between these two methods:
http://forum.xda-developers.com/showthread.php?t=1320350
http://forum.xda-developers.com/showthread.php?t=1103399
The first method (at least for me):
+: is easier to do for an android noob
+: doesn't increment the counter, nor places the warning ! at the boot
-: doesn't install CWM, which I might use to say install the battery mod to show the %
One last question, if I go with CF-ROOT to do my first rooting experience, then say I move to Speedmod kernel, is it doable or it might cause issues? What about reverting from Speedmod to CF?
Thanks as always,
TD
It's impossible for anyone to say what is best for you, but since you then go on to say you ant CWM, surely it makes sense to go down the CF-Root route. It's not difficult to open a program, select a file and click start.
There's no problem changing kernel, so long as you read the instructions on how to flash properly.
It's true that it's not possible to say which one will suit you best, but for me it is Ninphetamine 2.1.3 with Stock XWKJ1, Undervolted with SetCPU.
Giving you root access if just a part of the kernel. So if you flash any rooted kernel that's all you need. Cf-root kernel is as close to stock as possible except its rooted. You can also flash the many other rooted kernels, my favorite is Siyahkernel, it offers the most functionality and gives you pretty much every governor and scheduler out there with NTFS support and much more.
Once you flash a rooted kernel (which typically gives you cwm as part of the kernel) you can from that point on flash other kernels that are also rooted, using cwm. You will no longer need odin.
Sent from my GT-I9100 using Tapatalk
Hello,
I am currently running GINGERBREAD.BVKL1, 2.6.35.7-I9100BVKL1-CL774645 and want to reflash kernel using CF-ROOT.
I am reading Chainfire's thread, and at this post I can find the closest match to my kernel being CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5.zip.
Chainfire also mentions: KL1 (GB): Untested
I'm wondering if this is still the case, considering that this was posted on the 30th of May 2011.
So anyone out there running CF-ROOT KL1?
Yup, I was asking myself the same question because I used Kies to update to 2.6.35.7 BVKL1 and lost root. Obviously zergrush failed and i checked for insecure or rooted kernels. However I don't think the KL1 (GB) has anything to do with this version.
Any help would be apreciated.
w00tz said:
Hello,
I am currently running GINGERBREAD.BVKL1, 2.6.35.7-I9100BVKL1-CL774645 and want to reflash kernel using CF-ROOT.
I am reading Chainfire's thread, and at this post I can find the closest match to my kernel being CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5.zip.
Chainfire also mentions: KL1 (GB): Untested
I'm wondering if this is still the case, considering that this was posted on the 30th of May 2011.
So anyone out there running CF-ROOT KL1?
Click to expand...
Click to collapse
cerberus1405 said:
Yup, I was asking myself the same question because I used Kies to update to 2.6.35.7 BVKL1 and lost root. Obviously zergrush failed and i checked for insecure or rooted kernels. However I don't think the KL1 (GB) has anything to do with this version.
Any help would be apreciated.
Click to expand...
Click to collapse
Ive been using the XW_INU_KL1 kernel in my phone for a while now with no problems at all.The kernel is now well and trully tested and is even included in my ROM.If it wasnt fully tested the dev wouldnt have put it in there so its perfectly safe to flash.As far as if its the correct kernel or not you only have to read the thread by Chainfire.As with any kernel the most important part are the last 3 digits.If your kernel ends in KL1 then its the correct one to use.
EDIT:Just thought Id let you know that my root kernel (XWKL1) is also 2.6.35.7 so the fact that you have "BV" doesnt matter.
cooza said:
Ive been using the XW_INU_KL1 kernel in my phone for a while now with no problems at all.The kernel is now well and trully tested and is even included in my ROM.If it wasnt fully tested the dev wouldnt have put it in there so its perfectly safe to flash.As far as if its the correct kernel or not you only have to read the thread by Chainfire.As with any kernel the most important part are the last 3 digits.If your kernel ends in KL1 then its the correct one to use.
EDIT:Just thought Id let you know that my root kernel (XWKL1) is also 2.6.35.7 so the fact that you have "BV" doesnt matter.
Click to expand...
Click to collapse
Great, thanks for the info! Will be reflashing today.
First, Thanks again cooza.
w00tz, for your info,
I have flashed XW_INU_KL1 kernel via Odin (because I didn't have CWM Manager) and installed superuser and busybox thus gaining root.
Then reflashed "original" 2.6.35.7-I9100BVKL1-CL774645 from intratech:
http://forum.xda-developers.com/showthread.php?t=1113928&highlight=bvkl1
Now running "official" kernel with root.
cerberus1405 said:
First, Thanks again cooza.
w00tz, for your info,
I have flashed XW_INU_KL1 kernel via Odin (because I didn't have CWM Manager) and installed superuser and busybox thus gaining root.
Then reflashed "original" 2.6.35.7-I9100BVKL1-CL774645 from intratech:
http://forum.xda-developers.com/showthread.php?t=1113928&highlight=bvkl1
Now running "official" kernel with root.
Click to expand...
Click to collapse
Thanks for sharing! Just reflashed minutes ago using XW_INU_KL1 also via Odin, gained root without problems and then unlocked my carrier block via Helroz's Galaxy S Unlock. Everything went smoothly.
I'm downloading now the 'original' stuff, it's good to have.
Is there any certain reason to reflash the 'original'? Besides getting rid of the yellow triangle. I'm guessing that KIES upgrades will also work with XW_INU_KL1. And I'm under the impression that my phone is a little bit faster with this kernel.
Good to see everything went well.Downloading the original stuff is just personal choice.You can flash any firmware you want,test it,change it,flash carrier branded and non carrier branded firmwares until you find what you like as each different firmware has a different modem.Good idea to get rid of the triangle if you dont have a usb jig just in case you want to send it away.Your new original F/W will have the modem being used in your area for best speed and conectivity so if you can be rooted on that F/W then better still.Kies will still work but the updates will only work on your BV rooted version.
Roger that. Thank you again, much appreciate it.
cerberus1405 said:
First, Thanks again cooza.
w00tz, for your info,
I have flashed XW_INU_KL1 kernel via Odin (because I didn't have CWM Manager) and installed superuser and busybox thus gaining root.
Then reflashed "original" 2.6.35.7-I9100BVKL1-CL774645 from intratech:
http://forum.xda-developers.com/showthread.php?t=1113928&highlight=bvkl1
Now running "official" kernel with root.
Click to expand...
Click to collapse
Just a little revive.
Because it has been reported to me that sometimes I cannot be heard by the other person while talking, I have decided to also flash the original kernel from intratech. From what I understand, Firmware and Kernel should have matching versions.
I wanted to ask you if:
1. you reflashed from CWM or via Download mode?
2. do you still have CWM after reflashing this stock kernel?
Thanks.
Friendly bump. I tried to contact cerberus1405 but haven't had success.
So if anybody else can answer my questions. It doesn't matter if it's about KL1 kernel or another one.
I guess you didn't manage to search in the past week then? Kernel is unlikely to have any impact on call quality, only modem.
1). If you want to flash a stock kernel, you can do it several ways and there's no difference in outcome.
2). No, if you flash a stock kernel, you will lose CWM recovery.
If those are not the questions you wanted asking then you'll have to be more specific.
w00tz said:
Friendly bump. I tried to contact cerberus1405 but haven't had success.
So if anybody else can answer my questions. It doesn't matter if it's about KL1 kernel or another one.
Click to expand...
Click to collapse
What's your question, more specified?
w00tz said:
Just a little revive.
Because it has been reported to me that sometimes I cannot be heard by the other person while talking, I have decided to also flash the original kernel from intratech. From what I understand, Firmware and Kernel should have matching versions.
I wanted to ask you if:
1. you reflashed from CWM or via Download mode?
2. do you still have CWM after reflashing this stock kernel?
Thanks.
Click to expand...
Click to collapse
sorry, didn't log in lately. I flashed via Download mode.
usualy CWM works with CF-Root kernels. In my case CWM detected that I was running a different kernel and warned me about some features disabled. The app appears functional but haven't tried it yet.
Hy there, i have BVKL1 on my s2 and if i understand what is written here i can use
XWKL1 insecure to flash ?
Is that correct, sry if i bother u i'm kinda noob on this ...
Thx.
R3d_Wolf said:
Hy there, i have BVKL1 on my s2 and if i understand what is written here i can use
XWKL1 insecure to flash ?
Is that correct, sry if i bother u i'm kinda noob on this ...
Thx.
Click to expand...
Click to collapse
KL1 yes
Best root method is .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
I was thinking to use odin + ClockworkMod-Recovery. This method it's not ok ?
Thank you for your answer.
Hi,
I used Odin and CF-Root XW_KL1 kernel.
I have kept these links http://forum.xda-developers.com/showthread.php?t=788108 and http://forum.xda-developers.com/showthread.php?t=1103399, try to find a matching kernel there.
This method incremented the flash counter to 1 (and when I boot the phone I get the warning triangle), but I don't quite really care anymore about it.
It's been a while since I flashed and I can say that it is stable.
I have a usb jig so hopefully no triangle and counter 0.
Thx
Hi S2 user, :angel:
I will buy a new S2 phone soon. I need a little help from you guys. I need to know something about S2 :laugh:
My old phone is Xperia Arc S. This phone need following step to flash kernel and rom.
Kernel:
For flash a new kernel, I need to unlocked the bootloader first. Then this phone can flash any kernel anytime. But unlocking the bootloader will void the warranty.
Rom:
For flash a new rom, as long as the rom does not need to have specific kernel, in other word, stock based rom, no unlocked bootloader required. Just install the CWM and flash the rom.
How about S2 guys? Do I need to unlock something before flash kernel and rom? Can someone explain clearly or likes how I explain my old phone.
p/s- i read in some thread, doing a factory reset in cwm will make S2 brick? hard brick? can't even power on the phone. OMG is it true?
its very scary because in Xperia Arc S, i always flash a new rom. flasholic
I don't want my new S2 brick
I hope you guys can help me. Thanks
faiz5200 said:
Hi S2 user, :angel:
I will buy a new S2 phone soon. I need a little help from you guys. I need to know something about S2 :laugh:
My old phone is Xperia Arc S. This phone need following step to flash kernel and rom.
Kernel:
For flash a new kernel, I need to unlocked the bootloader first. Then this phone can flash any kernel anytime. But unlocking the bootloader will void the warranty.
Rom:
For flash a new rom, as long as the rom does not need to have specific kernel, in other word, stock based rom, no unlocked bootloader required. Just install the CWM and flash the rom.
How about S2 guys? Do I need to unlock something before flash kernel and rom? Can someone explain clearly or likes how I explain my old phone.
p/s- i read in some thread, doing a factory reset in cwm will make S2 brick? hard brick? can't even power on the phone. OMG is it true?
its very scary because in Xperia Arc S, i always flash a new rom. flasholic
I don't want my new S2 brick
I hope you guys can help me. Thanks
Click to expand...
Click to collapse
You don't have to unlock. Just download Odin and flash all the ROMs/kernels you want. As for the cwm brick bug, your phone will only brick if you factory reset through CWM in 4.0.4. In other versions you should be fine.
Sent from my GT-I9100 using xda app-developers app
S2 is the best phone to flash No problem with bootloader lock, you download Odin und happy flashing
Gesendet von meinem GT-I9100 mit Tapatalk 2
preseodymium said:
You don't have to unlock. Just download Odin and flash all the ROMs/kernels you want. As for the cwm brick bug, your phone will only brick if you factory reset through CWM in 4.0.4. In other versions you should be fine.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
faiz5200 said:
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
Click to expand...
Click to collapse
I am currently installing 4.1.2, unofficial of course
The brick Bug problem by 4.0.4 only with Stock Kernel ! when you have 4.0.4 on your phone you flash a save Kernel (Siyah, Dorimanax .....) with Odin (only Odin not Cwm )
and it was save .After you can flash wath you want
smooth 123 said:
The brick Bug problem by 4.0.4 only with Stock Kernel ! when you have 4.0.4 on your phone you flash a save Kernel (Siyah, Dorimanax .....) with Odin (only Odin not Cwm )
and it was save .After you can flash wath you want
Click to expand...
Click to collapse
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
faiz5200 said:
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
Click to expand...
Click to collapse
enjoy ur s2, i just got the s2 and flash over 20 roms like crazy!! jajaja is very good phone
faiz5200 said:
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
Click to expand...
Click to collapse
100% safe! Her is ohter 100% safe Kernel http://forum.xda-developers.com/showthread.php?t=1877270
for 4.0.4 Stock In this thread you found more to the theme brick bug.
I flash my S2 i don t know:victory: 100× no Problem S2 likes flashing
faiz5200 said:
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
Click to expand...
Click to collapse
You factory reset when installing ROMs to make sure there are no errors. Plus with siyah kernels, you can't be 100% sure your phone won't brick when factory reset in CWM. Best is to flash 4.0.3 before doing anything else.
Sent from my GT-I9100 using xda app-developers app
Rooting
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
faiz5200 said:
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
Click to expand...
Click to collapse
I'm not sure about CF root though. Although the ROM I am in now has built in kernels, I still think its best to root first as some ROMs may not have the built in kernel (never searched other ROMs not entirely sure). I might recomment siyah kernel though
Sent from my GT-I9100 using xda app-developers app
preseodymium said:
I'm not sure about CF root though. Although the ROM I am in now has built in kernels, I still think its best to root first as some ROMs may not have the built in kernel (never searched other ROMs not entirely sure). I might recomment siyah kernel though
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
uhh.. So root is come from kernel? Ermm.. so it different than xperia. So if I flash siyah kernel, I do not need to root?
faiz5200 said:
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
Click to expand...
Click to collapse
Some people want to simple root their phone and don't care too much for custom roms and stuff. So for such people, they can simply root their phone using one of the many rooting methods mentioned.
However, if your primary aim is to install a custom rom/ kernel, you can use Odin to flash a custom kernel on your phone. (like siyah, dorimanx, Philz, the list goes on..) and you'll have root. Thereafter you can install a custom rom compatible with the kernel. Earlier on it was simple. Flash siyah or dorimanx and any custom rom will work on it. Kinda like a 'one size fits all' deal. However, right now with new mali drivers etc, some versions of a kernel are reqd based on which rom you plan to install. (JB with new mali drivers or JB without those new mali drivers/ICS)
CF-Root is the method I'd used..but right now it's not recommended, since if you're on certain 4.0.4 firmware, that is susceptible to the emmc brickbug I'm sure you've read about. Siyah, dori, etc kernels are safe.
HAXTREME said:
Some people want to simple root their phone and don't care too much for custom roms and stuff. So for such people, they can simply root their phone using one of the many rooting methods mentioned.
However, if your primary aim is to install a custom rom/ kernel, you can use Odin to flash a custom kernel on your phone. (like siyah, dorimanx, Philz, the list goes on..) and you'll have root. Thereafter you can install a custom rom compatible with the kernel. Earlier on it was simple. Flash siyah or dorimanx and any custom rom will work on it. Kinda like a 'one size fits all' deal. However, right now with new mali drivers etc, some versions of a kernel are reqd based on which rom you plan to install. (JB with new mali drivers or JB without those new mali drivers/ICS)
CF-Root is the method I'd used..but right now it's not recommended, since if you're on certain 4.0.4 firmware, that is susceptible to the emmc brickbug I'm sure you've read about. Siyah, dori, etc kernels are safe.
Click to expand...
Click to collapse
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
faiz5200 said:
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
Click to expand...
Click to collapse
For S2 we can. Because it won't increase your flash counter. But I never tried flashing through CWM.
Sent from my GT-I9100 using xda app-developers app
faiz5200 said:
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
Click to expand...
Click to collapse
There are two ways of flashing a kernel.
1. Use the .tar version of the kernel and flash via Odin
(the same way you'd flash the cf-root kernel you'd mentioned in a post above. I'll assume you know the steps as they're mentioned in chainfire's post. Or there are many posts on that topic)
Advantages: tried and tested route, simple one step method. You're rooted and have a custom kernel in about 30 secs.
Disadvantage: You rely on Odin and the connection to your computer which some don't trust. Increases flash counter.
2. Use the .zip version of the kernel and flash via CWM.
Since in this case you need CWM to start off with, you can use Rachmat3's method described HERE to get temporary CWM first.
Advantages: No computer needed. Everything happens through your phone. Flash counter isnt increased.
Disadvantages: Can be a little finicky at times..but you'll get there eventually. Involves 2 steps. First get temporary CWM, then install custom kernel via cwm.
You can start off with a very popular kernel. Gokhanmoral's siyah kernel.Both the zip and tar versions are available downloadable from HERE
HAXTREME said:
There are two ways of flashing a kernel.
1. Use the .tar version of the kernel and flash via Odin
(the same way you'd flash the cf-root kernel you'd mentioned in a post above. I'll assume you know the steps as they're mentioned in chainfire's post. Or there are many posts on that topic)
Advantages: tried and tested route, simple one step method. You're rooted and have a custom kernel in about 30 secs.
Disadvantage: You rely on Odin and the connection to your computer which some don't trust. Increases flash counter.
2. Use the .zip version of the kernel and flash via CWM.
Since in this case you need CWM to start off with, you can use Rachmat3's method described HERE to get temporary CWM first.
Advantages: No computer needed. Everything happens through your phone. Flash counter isnt increased.
Disadvantages: Can be a little finicky at times..but you'll get there eventually. Involves 2 steps. First get temporary CWM, then install custom kernel via cwm.
You can start off with a very popular kernel. Gokhanmoral's siyah kernel.Both the zip and tar versions are available downloadable from HERE
Click to expand...
Click to collapse
Another disadvantage of "not using" odin is when you cant enter cwm.
I use cwm and mobile odin.I flashed a kernel and couldnt access cwm nor phone would boot.
So I had to fix it using my pc via odin.
Hi!
I was hesitant to open a new thread, especially since I watched the noob video before registration. But since I really want to make sure that what I am doing is correct, I have decided to post this.
I have SGS2-I9100 with ICS (so my firmware version is XWLPD). I will be using this tutorial to root my phone (How to Root Galaxy S2 i9100! [ICS][Android 4.0+] -on galaxys2root dot com) I am familiar with the basic terminology and also understand the principles of rooting. However, I do have a question about which CF-kernel am I supposed to flash. I found two of those (v5.3 and v5.4):
From the tutorial (i can't post outside links) - v5.3
And from Android authority - v5.4
Which one should i use and are they both ok with XWLPD firmwares?
(And don't I need an original kernel after the rooting? With previous tutorials, there was always an insecure and a secure kernel)
And after the device is rooted, what is the best thing to do? I am thinking: first I would flash Clockworkmod Recovery 4.0.1.4 (and backup my original ROM), and then install TITANIUM BACKUP for contacts, apps etc. Is that good?
I really appreciate all your help!
NomenNescio11 said:
Hi!
I was hesitant to open a new thread, especially since I watched the noob video before registration. But since I really want to make sure that what I am doing is correct, I have decided to post this.
I have SGS2-I9100 with ICS (so my firmware version is XWLPD). I will be using this tutorial to root my phone (How to Root Galaxy S2 i9100! [ICS][Android 4.0+] -on galaxys2root dot com) I am familiar with the basic terminology and also understand the principles of rooting. However, I do have a question about which CF-kernel am I supposed to flash. I found two of those (v5.3 and v5.4):
From the tutorial (i can't post outside links) - v5.3
And from Android authority - v5.4
Which one should i use and are they both ok with XWLPD firmwares?
(And don't I need an original kernel after the rooting? With previous tutorials, there was always an insecure and a secure kernel)
And after the device is rooted, what is the best thing to do? I am thinking: first I would flash Clockworkmod Recovery 4.0.1.4 (and backup my original ROM), and then install TITANIUM BACKUP for contacts, apps etc. Is that good?
I really appreciate all your help!
Click to expand...
Click to collapse
I am not sure about CF-Root, but I recommend siyah kernels because its safer. It should also work with your firmware version. If you are on 4.0.4, best not to have CF-Root and wipe data through CWM since you might brick your phone. CWM also comes with siyah
Sent from my potato.
I have 4.0.3.
Thank you for your answer!
however...
Well, this has confused me a little.
So instead of CF-kernel I should use Siyah kernel? (@ gohkanmoral dot com right?). And then flash it with ODIN 1.85. And that is it?
And CWM is allready a part of the kernel, so if power off my phone then i can reboot into ClockworkMod Recovery by holding down Volume Down, Home button, and Power button together?
I am sorry for my lack of understanding.
NomenNescio11 said:
Well, this has confused me a little.
So instead of CF-kernel I should use Siyah kernel? (@ gohkanmoral dot com right?). And then flash it with ODIN 1.85. And that is it?
And CWM is allready a part of the kernel, so if power off my phone then i can reboot into ClockworkMod Recovery by holding down Volume Down, Home button, and Power button together?
I am sorry for my lack of understanding.
Click to expand...
Click to collapse
Yes, u can use Siyah kernel V4.1.5 from www.gohkanmoral.com ( u should Dwnld the file from 'Download Tar (for Odin) link).
this kernel will root ur phone running Ics 4.0.3 and will also install the latest 6.x Recovery and also a dedicated 'CWM' app in ur app drawer which u can use to boot into recovery
Ps- its always better to clarify if in doubt rather than getting Stuck!!
Sun90 said:
Yes, u can use Siyah kernel V4.1.5 from wwwgohkanmoralcom ( u should Dwnld the file from 'Download Tar (for Odin) link).
this kernel will root ur phone running Ics 4.0.3 and will also install the latest 6.x Recovery and also a dedicated 'CWM' app in ur app drawer which u can use to boot into recovery
Ps- its always better to clarify if in doubt rather than getting Stuck!!
Click to expand...
Click to collapse
Thank you a million!! I would have surely downloaded v5.0. Well, I guess it is time to give it a try. I'll report when it is done. Hope this works!
Well, it worked like a charm! )
Now all I have to do is install a custom ROM.
Thank you again!
NomenNescio11 said:
Well, it worked like a charm! )
Now all I have to do is install a custom ROM.
Thank you again!
Click to expand...
Click to collapse
If you have problems while installing custom ROMs you can always ask in this thread and not creating a new one. Good luck
Sent from my potato.
the saga continues...custom roms...
So, I played with the root apps for a while, freezing bloatware etc.
Now it is time to install a custom ROM. So I went to INDEX of ROMs page. So since I have ICS 4.0.3, I can choose any of those? What is my best option? Use one of the Samsung based roms?
Your original ROM doesn't matter. Just make sure your kernel supports the custom ROM then it will work.
Sent from my potato running a potato.
NomenNescio11 said:
So, I played with the root apps for a while, freezing bloatware etc.
Now it is time to install a custom ROM. So I went to INDEX of ROMs page. So since I have ICS 4.0.3, I can choose any of those? What is my best option? Use one of the Samsung based roms?
Click to expand...
Click to collapse
the best way to say what is your best option is to try ROM by ROM
seriously, read the descriptions and choose the one that fits your needs, but before flashing new roms always do a nandroid backup, so you can restore your previous rom in case of troubles or if you just not like the new one