Just downloaded from swype website and when run the swype installer after putting my username and password and click install now, it gives the error,
Parsing error
How to grt rid of it
I´ve tried it about 10 times and somehow it suddenly worked ...
Sry, but that´s the only tip i can give you.
It takes the emsil and paseword ok but after that same parsong error
Any help
Sent from my Sony Tablet S using Tapatalk
Related
New to the forums but read and searched a lot before posting.
I want to load Hard SPL but after the loader says "verifying information on the Hermes," it gives me an Error [240]: file open.
Any ideas? TY
Nothing? Help me out
First off , post your question in the offical thread.
Second, did you follow the instructions precisely?
It isn't hard to do.
allan1 said:
First off , post your question in the offical thread.
Second, did you follow the instructions precisely?
It isn't hard to do.
Click to expand...
Click to collapse
I got this error following the instructions, yes
he's probably using Vista
He isn't... He's using XP
josh054 said:
He isn't... He's using XP
Click to expand...
Click to collapse
Oh I see now... file open error.
you've got issues with your user permissions mate, I suggest doing this while logged on as admin, or failing that, run it all from the root of your HDD
I had this same error as well I reccomend what he said above also Make sure no firewalls are up AT ALL !
My firewall is what gave me this error message ... Hope this Helps
Aha! My firewall is on... I'll take it off and try it again.
Thanks you two... I'll report back
Yeah IT usually is the firewall.... Good Luck Bro And hope it works for you
Worked! Thank you
Error [240]: File open
The update utility can not open the requested file. Please check your update utility.
Get this error. I have good synchronization.
Go to page 116 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
Its post #1160, you don't need to use the pc at all....
I prefer to use the sd card method to install os's too as I personally find it safer..
Cheers...
I have the same thing utility error 240. I turn off the firewall, the active sysc is good, and able to flash kaiser-HardSPLv1 but unable to flash new rom due to the 240 error. Help please?
siracer27, this is the Hermes forum... Can't really help with Kaiser...
Hope you didn't install Hermes Hard SPL on your Kaiser cos you will end up with a brick if you did...
I understand this hermes forum but try to search for error 240 and wasn't able to find it except here. any help, i have att tilt..
Only thing I can suggest is, if you're using XP, then upgrade the .net framework to 3.5.
Cheers...
hey everytime i try and change my wall paper i get this error.. can anyone tell me why and how to fix it..?
likwid25 said:
hey everytime i try and change my wall paper i get this error.. can anyone tell me why and how to fix it..?
Click to expand...
Click to collapse
Hi there
You are getting '' This error'' ?
A litlle more info is needed i think.
Plz post wat error you are getting.
And it,s always a good thing to put your Rom and Manila info in it to.
And maby its a question for the CHT thread
Greetz.
the error says:
an unexpected error has occured in CHT_Wall.exe
Select quit and then restart this program, or select Details for more info
im going into cookies home tab editor and selecting a wall paper from my camera folder..
im using the stock rom v. 2.13.531.1
manilla version 2.5.20121412.2
likwid25 said:
the error says:
an unexpected error has occured in CHT_Wall.exe
Select quit and then restart this program, or select Details for more info
im going into cookies home tab editor and selecting a wall paper from my camera folder..
im using the stock rom v. 2.13.531.1
manilla version 2.5.20121412.2
Click to expand...
Click to collapse
Did you reed/saw this instruction on the CHT Thread?
I'm not sure if it is that, but maybe it can help you.
Q: I get this error message: CHT_Wall.exe OutOfMemoryException
A: You will get this message if the resolution of the image you have set for your wallpaper is too big. Try selecting a smaller resolution - anything below 10MP (around 3000x3000) will be OK.
Click to expand...
Click to collapse
Take a look on the CHT Thread;
likwid25 said:
hey everytime i try and change my wall paper i get this error.. can anyone tell me why and how to fix it..?
Click to expand...
Click to collapse
just install .Net v3.5
ok i already have Net 3.5 installed and the picture that i am trying to select is a small image file.. nothing bigger than 640x480 so its none of those.. any other ideas..?
just reinstall .Net v3.5 it worked for me
Hi please can someone give me a hand.I am trying to flash my device as i naffed it changing the fonts on device.
first problem is flashtool is now saying scatter file is not LEGAL and then i get another saying brom error (1013) port fail... the preloader what was the big problem at first but i installed that after an hour or so...i just can not get this device flashed..nightmare...
please point me to what i am doing wrong
and when i try to use MDTflashtool i get error Microsoft Data Access Components 2.1
whats going on....
many thanks
IS THERE A ANDROID TOOL I CAN USE TO COMPLETELY FORMAT A DEVICE?
sas007 said:
Hi please can someone give me a hand.I am trying to flash my device as i naffed it changing the fonts on device.
first problem is flashtool is now saying scatter file is not LEGAL and then i get another saying brom error (1013) port fail... the preloader what was the big problem at first but i installed that after an hour or so...i just can not get this device flashed..nightmare...
please point me to what i am doing wrong
and when i try to use MDTflashtool i get error Microsoft Data Access Components 2.1
whats going on....
many thanks
IS THERE A ANDROID TOOL I CAN USE TO COMPLETELY FORMAT A DEVICE?
Click to expand...
Click to collapse
come on please guys anything...help me
every time i try to flash i am now getting this error in sp flashtool.
"BROM ERROR S_COM_PORT_OPEN-FAIL.(1013)" PLEASE ANYONE GIVE ME A HINT I AM PULLING MY HAIR OUT
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
Thanks for the info will give it a go
Sent from my e1901_v77_gq2002_fg using Tapatalk 2
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
thank for the help,
now i dont have the error 1013 but i have a new error that is 6010 (code_download_forbidden)
please help
talvigi said:
thank for the help,
now i dont have the error 1013 but i have a new error that is 6010 (code_download_forbidden)
please help
Click to expand...
Click to collapse
the only thing u need to uncheck is preloader
an is it the right scatter file u are using
1013 error
i'm having 1013 error please help meeeee.....
Hi ,I had a 1013 problem and solved by changing the option in the connection tab by High Speed & With battery
tried to flash again with battery inside and it worked!
hi guys
im trying to flash on my huawei g750-u10
and im getting this error over and over again
i try to change cable change port reinstall vcom drivers but not working any thing
how to fix it ?
see this : https://ibb.co/bFnhgk
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
Oh, thank you, I got rid of it.
Thumbs up Man!:good:
I kept getting this error:
Google error : Not update
We're having problem syncing your information. Try again later.
Last tried 2 second ago
error code: 801901F5
Thanks
randy_c said:
I kept getting this error:
Google error : Not update
We're having problem syncing your information. Try again later.
Last tried 2 second ago
error code: 801901F5
Thanks
Click to expand...
Click to collapse
Have you tried connecting to WIFI and checking again?
Also Make sure you password is correct ( this has happened to me when I have changed my passord on the pc and forgot to do it on the phone)
Try a full reset again if you afford it
regards.
Help I cant install omap4boot driver as it constantly vanishes when I click to pudate the driver there is always an error and talks about some kind of inf error
please help
^^ +1
Nvm, I fixed it
if anyone reading this needs help on this just pm me
or google search what the error thing says when It comes up
niggist said:
Nvm, I fixed it
if anyone reading this needs help on this just pm me
or google search what the error thing says when It comes up
Click to expand...
Click to collapse
The solution was to turn of signature checking , yes ?
This was happened me too.
For me, I'm having trouble installing the fastboot driver (the one you have to install the second time).