I kept getting this error:
Google error : Not update
We're having problem syncing your information. Try again later.
Last tried 2 second ago
error code: 801901F5
Thanks
randy_c said:
I kept getting this error:
Google error : Not update
We're having problem syncing your information. Try again later.
Last tried 2 second ago
error code: 801901F5
Thanks
Click to expand...
Click to collapse
Have you tried connecting to WIFI and checking again?
Also Make sure you password is correct ( this has happened to me when I have changed my passord on the pc and forgot to do it on the phone)
Try a full reset again if you afford it
regards.
Related
hi all
sorry to bother u all but a weird thing is happening with me
I was trying 2 flash my rom but it says"INVALID UPDATE TOOL" error 200...........through the SPL method..........
I have flashed my device a no. of times but this time it is not happening i have even reinstalled it..............
but of no use ............PLEASE HELP........
I think you have to download another utility to flash your gene. Maybe it's corrupted.
or may be its time to visit service center
nexticon2000 said:
hi all
sorry to bother u all but a weird thing is happening with me
I was trying 2 flash my rom but it says"INVALID UPDATE TOOL" error 200...........through the SPL method..........
I have flashed my device a no. of times but this time it is not happening i have even reinstalled it..............
but of no use ............PLEASE HELP........
Click to expand...
Click to collapse
Restart you comp.At the very same time, start your device.get it synced properly first.do not keep it in USB TO PC mode.make sure your device is in active sync mode.Then try.i have faced these errors many times.
just try what i say,u'll do good.
YEAH
THanx man
It WORKS!!!!!!!!!!!!!
It's gud 2 flash my gene again......................
just downloaded urs old gene 7.1
karan999 said:
Restart you comp.At the very same time, start your device.get it synced properly first.do not keep it in USB TO PC mode.make sure your device is in active sync mode.Then try.i have faced these errors many times.
just try what i say,u'll do good.
Click to expand...
Click to collapse
good.Thanks! i do it. and it runs correct again.
I was notified by my device that an update was available so i had plugged into the pc, via Zune etc... followed the on screen instructions..
I got this error code - 801811A3 something to do with BITS?
Its only a week old and i have changed to my new sim since trying this. I did a bit of a serach and followed the instructions of turn it off, restart zune etc... but no joy
Any more suggestions?
EDIT>>>
sScratch the above - its updating as i type.v No idea why or how so i cannot give any ideas as to how to overcome said error code.
Symondo said:
I was notified by my device that an update was available so i had plugged into the pc, via Zune etc... followed the on screen instructions..
I got this error code - 801811A3 something to do with BITS?
Its only a week old and i have changed to my new sim since trying this. I did a bit of a serach and followed the instructions of turn it off, restart zune etc... but no joy
Any more suggestions?
EDIT>>>
sScratch the above - its updating as i type.v No idea why or how so i cannot give any ideas as to how to overcome said error code.
Click to expand...
Click to collapse
Thats your PC's issue. BITS = Background Intelligent Transfer Service. Either the service failed to start, or you disabled it.
Just downloaded from swype website and when run the swype installer after putting my username and password and click install now, it gives the error,
Parsing error
How to grt rid of it
I´ve tried it about 10 times and somehow it suddenly worked ...
Sry, but that´s the only tip i can give you.
It takes the emsil and paseword ok but after that same parsong error
Any help
Sent from my Sony Tablet S using Tapatalk
Hi please can someone give me a hand.I am trying to flash my device as i naffed it changing the fonts on device.
first problem is flashtool is now saying scatter file is not LEGAL and then i get another saying brom error (1013) port fail... the preloader what was the big problem at first but i installed that after an hour or so...i just can not get this device flashed..nightmare...
please point me to what i am doing wrong
and when i try to use MDTflashtool i get error Microsoft Data Access Components 2.1
whats going on....
many thanks
IS THERE A ANDROID TOOL I CAN USE TO COMPLETELY FORMAT A DEVICE?
sas007 said:
Hi please can someone give me a hand.I am trying to flash my device as i naffed it changing the fonts on device.
first problem is flashtool is now saying scatter file is not LEGAL and then i get another saying brom error (1013) port fail... the preloader what was the big problem at first but i installed that after an hour or so...i just can not get this device flashed..nightmare...
please point me to what i am doing wrong
and when i try to use MDTflashtool i get error Microsoft Data Access Components 2.1
whats going on....
many thanks
IS THERE A ANDROID TOOL I CAN USE TO COMPLETELY FORMAT A DEVICE?
Click to expand...
Click to collapse
come on please guys anything...help me
every time i try to flash i am now getting this error in sp flashtool.
"BROM ERROR S_COM_PORT_OPEN-FAIL.(1013)" PLEASE ANYONE GIVE ME A HINT I AM PULLING MY HAIR OUT
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
Thanks for the info will give it a go
Sent from my e1901_v77_gq2002_fg using Tapatalk 2
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
thank for the help,
now i dont have the error 1013 but i have a new error that is 6010 (code_download_forbidden)
please help
talvigi said:
thank for the help,
now i dont have the error 1013 but i have a new error that is 6010 (code_download_forbidden)
please help
Click to expand...
Click to collapse
the only thing u need to uncheck is preloader
an is it the right scatter file u are using
1013 error
i'm having 1013 error please help meeeee.....
Hi ,I had a 1013 problem and solved by changing the option in the connection tab by High Speed & With battery
tried to flash again with battery inside and it worked!
hi guys
im trying to flash on my huawei g750-u10
and im getting this error over and over again
i try to change cable change port reinstall vcom drivers but not working any thing
how to fix it ?
see this : https://ibb.co/bFnhgk
-fluffy- said:
u need to run it as adminstrator
i got the same error when i ran it as normal program
then i went an run it as admin an then it worked
Click to expand...
Click to collapse
Oh, thank you, I got rid of it.
Thumbs up Man!:good:
I am trying to install the Android 4.3 update released yesterday. I have a Galaxy S4 SCH-i545 (Verizon). The phone currently runs stock firmware and is not rooted. When I press install now, the phone reboots, looks like it is updating, than says error and restarts. A message pops up when the phone restarts stating the update failed due to error 402. I tried to update via Kies, but it says there is no available update in Kies, but my phone says the update is available. Please help me with this issue. I have a lot of data on the phone and I need my warranty to stay intact, so no Odin please.
Error 402
bistwo1 said:
I am trying to install the Android 4.3 update released yesterday. I have a Galaxy S4 SCH-i545 (Verizon). The phone currently runs stock firmware and is not rooted. When I press install now, the phone reboots, looks like it is updating, than says error and restarts. A message pops up when the phone restarts stating the update failed due to error 402. I tried to update via Kies, but it says there is no available update in Kies, but my phone says the update is available. Please help me with this issue. I have a lot of data on the phone and I need my warranty to stay intact, so no Odin please.[/QUOT
I have the same issue. Anybody have any insight ??
Click to expand...
Click to collapse
walshdroid said:
bistwo1 said:
I am trying to install the Android 4.3 update released yesterday. I have a Galaxy S4 SCH-i545 (Verizon). The phone currently runs stock firmware and is not rooted. When I press install now, the phone reboots, looks like it is updating, than says error and restarts. A message pops up when the phone restarts stating the update failed due to error 402. I tried to update via Kies, but it says there is no available update in Kies, but my phone says the update is available. Please help me with this issue. I have a lot of data on the phone and I need my warranty to stay intact, so no Odin please.[/QUOT
I have the same issue. Anybody have any insight ??
Click to expand...
Click to collapse
same problem here...anyone??
Click to expand...
Click to collapse
Maybe similar issue in Verizon can help understand the problem
https://community.verizonwireless.com/thread/785863
Check this out! You , YES! you are an " Android ". Not your phone but U.
Software Upgrade Assistant
Fixed mine! I was also getting the 402 error and the Verizon store had no idea what to do when soft resets didn't work. They told me to do a hard reset when I got home.
I connected to my pc with usb and in the popup (windows 8.1) I selected to install the software upgrade assistant. I ran the assistant and after 10min or so and a phone reboot it said update complete. After that I unplugged my phone from the pc and checked the software update on the phone. It said there was still an update to run so I downloaded and installed it in about 20min and it worked. Now it's up to date.
Hope this helps someone.
need software upgrade assistant file
I delete My file from my phone is there any way you can send me the file
thank you
sublucent said:
Fixed mine! I was also getting the 402 error and the Verizon store had no idea what to do when soft resets didn't work. They told me to do a hard reset when I got home.
I connected to my pc with usb and in the popup (windows 8.1) I selected to install the software upgrade assistant. I ran the assistant and after 10min or so and a phone reboot it said update complete. After that I unplugged my phone from the pc and checked the software update on the phone. It said there was still an update to run so I downloaded and installed it in about 20min and it worked. Now it's up to date.
Hope this helps someone.
Click to expand...
Click to collapse
Sorry, it's been awhile. I no longer have any of the files.
pmontu said:
I delete My file from my phone is there any way you can send me the file
thank you
Click to expand...
Click to collapse