I accidentally spilled a small bottle of water near the right pocket, which is where my phone was resting. The water got inside the TPU case, towards the top where power button and headphone jack is, along with the back of the phone around camera and kickstand. I took the case out as quickly as I could and dried the phone. It seems to be working ok, though I am at work and can't really try it out to see if all functions are working. Anyone have any advice? Should I try to go to sprint?
Put your phone into a bowl of uncooked rice. It will help draw out any water that might be in it....if done quickly enough that is.
JManekia said:
I accidentally spilled a small bottle of water near the right pocket, which is where my phone was resting. The water got inside the TPU case, towards the top where power button and headphone jack is, along with the back of the phone around camera and kickstand. I took the case out as quickly as I could and dried the phone. It seems to be working ok, though I am at work and can't really try it out to see if all functions are working. Anyone have any advice? Should I try to go to sprint?
Click to expand...
Click to collapse
i wouldnt take it to sprint yet.. if everythings working your all set.. if somethings wrong with the phone because of the water your screwed because insurance is no good if u messed your phone up from water they have lil stickers inside the phone and if they get wet they change color.. thats how they kno if the phone has water damage.. i would see if everything works before u bring it in...
I thought sprints coverage includes water damage. Have to pay the deductible tho. I once dropped my 3D in the toilet. I recovered it quickly and removed the case, and the indicator by the battery did not show up. I thought I was in the clear until about 3wks later and my phone started acting goofy beginning with losing mobile service. Since the indicator still wasn't showing up I took it in and got a replacement phone and didn't have to pay the deductible. I had read that water damage can take up to a couple months to show up.
Sent from my EVO LTE using xda premium
I would just wait and see if it recovers before getting a new one
For first few minutes, it worked ok, than the screen started to fliker, than it progressively got worse from there. Camera stopped working, than the phone started to vibrate on its own. After rebooting, it died. Now the screen is completely non-responsive, though I can feel the haptic feedback every now and than. I am getting phone calls as the phone rings, but I can't answer it since, well, the screen is not working. I can silence the ring with the power button, but the power button isn't doing anything else.
I can't believe that a freak accident like that with a few drops of water can do this much damage. My phone is in Diztronic TPU case with a screen protector. It was in my pocket when the water spilled, with few drops spilling in my pocket, on top of the phone, went under the phone case and now I have a dead phone
Open your phone open, clean the board with a tooth brush soaked in alcohol. It would be best to bake to the board, I use a hako with a paint can with a whole in the bottom. I have actually heard of people putting their phones a toaster oven, sounds crazy but its more so to get rid of any moisture and reflow any damaged chips.
---------- Post added at 10:22 PM ---------- Previous post was at 10:09 PM ----------
Cyrene said:
I thought sprints coverage includes water damage. Have to pay the deductible tho. I once dropped my 3D in the toilet. I recovered it quickly and removed the case, and the indicator by the battery did not show up. I thought I was in the clear until about 3wks later and my phone started acting goofy beginning with losing mobile service. Since the indicator still wasn't showing up I took it in and got a replacement phone and didn't have to pay the deductible. I had read that water damage can take up to a couple months to show up.
Sent from my EVO LTE using xda premium
Click to expand...
Click to collapse
There is a indicator inside the phone also. But it sounds like they took it in as other problems without thinking water damage, as your visible indicator was fine.
I thought the alcohol tip only worked with lab grade isopropyl alcohol? Basically it bonds with the water then evaporates, but the kind you get at the drug store isn't concentrated enough. I fully admit i could be wrong though.
Sent from my LTEvo
Find all the silica gel packs you can get, go to a shoe store and take all the packs out of the shoe boxes or go to Home Depot. Then put them all in a bow and put your phone in the middle of it, it's the best way to draw out moisture.
Dude turn your phone off and let it dry for a day. If you keep it on it will most likely short something out.
Sent from my EVO using XDA
i would do the rice thing and see what happens after a day.. otherwise if you take it to a sprint store DO NOT say anything about the water damage unless they ask.. You may have gotten lucky and the sticker may have no trace of water..
Damp Rid
Go to the hardware and get a tub of damp rid. Put thr DR in a large tupperware.put the phone in a smaller tupperware and put the open small tupperware into the big tupperware (sealed) for 2 to 3 days. I saved 2 phones this way. . . . Kids.
My wife dropped her OG evo in the bathtub and it was totally done. We pay for the Sprint coverage and they took care of us with no issues whatsoever.
I can verify their warranty definitely covers water damage. That is if the rice trick doesn't work first.
Johnny
Related
OK folks,
After a night of wine and tequila on a brother birthday, i got to home with my girlfriend. I get quickly to bathroom and my phone fell out of my coat directly on the toilet. When I saw, I took as fast as possible and not turned over, and dry it with a hairdryer, removed the battery and sim/sd card.
Apparently the screen still with some water on it inside. I didnt opened it because it still on warranty (1 month of use), so i'm freaking out, here in brazil I paid $800 (it costs $1200 really, but i got a promotion) and i'm out of money. So if you guys know something to do and if atrix have a protection, please help me.
PS: donation accepted
Like any other phone that gets wet...battery removal is a priority. Then put it in a ziploc bag of dry, uncooked rice for several days. Your warranty is now void since it's been wet, so dis-assembly shouldn't bother you.
you might as well take it apart to let it dry since your warranty does not cover water damage. you can always try to find some water damage stickers on ebay and replace them and try to get the warranty to cover it...
I already removed the battery, of course. I'm thinking of dis-assembly this and try to replace the water damage indicator, but there is no other sticker that motorola can know that i opened it? because opening void the warranty too.
Lesson learned. Don't put a phone in a pocket where gravity can take over and drop.
That being said, I've fixed a couple wet iPhones by putting it in dry uncooked white rice for acouple days.
LivingChampion said:
Lesson learned. Don't put a phone in a pocket where gravity can take over and drop.
That being said, I've fixed a couple wet iPhones by putting it in dry uncooked white rice for acouple days.
Click to expand...
Click to collapse
Rice will usually work. HURRY
Thats not a 'lesson learned'. Every day the first thing i do when get in home is put the cell on its dock, but this time... it happens...
the cellphone is now on white rice uncooked, i'll leave it for some days and will try to call motorola to knows if they can do anything, maybe paying... i know the warranty is on the hell...
i'm just with fear about the water inside the lcd screen... i'll search around an video off dis-assembly of atrix..
My wife dropped hers in the toilet not only is it working fine but the moisture
sensor on the back under the cover is still white.
good thing our phone doesnt have void stickers so we can take it apart how many times we want without worrying, also the lcd is not glued to the digitizer and what not. so if there is water inside you can easily get it out..
kudos to moto.
I have found this: http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/1
Someone know at where should i dis-assembly? i think it's very hard to assembly it again after.
Thanks to everyone that are trying to help me, i'll thank every one!
Sorry for double post, edit bnt isn't working here (Opera),
Do someone know where to find the water damage indicator to replace mine? I didn't find it on ebay (or doesnt know how to name it)...
Thanks in advance.
I would like to name this build (if you dont mind)..."Toiletblur"
If you take it apart and let it dry out it should dry out and work again. It happened to another phone I had.
Sent from my MB860 using XDA Premium App
vanstorm said:
I would like to name this build (if you dont mind)..."Toiletblur"
If you take it apart and let it dry out it should dry out and work again. It happened to another phone I had.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Not quite so............corrosion can build up very quickly, and the only way to get rid of that is to take apart your phone, piece by piece, and very carefully clean out any corrosion deposits. There are guides for this with the iPhone, and other phones, but the Atrix is too new I believe for there to be a comprehensive guide showing what needs to be checked and cleaned. Contacts are one of the first places on which corrosion starts to appear.
Pretty sure there are no void stickers on this phone. Also there's only like 5 or 6 screws to take the whole phone apart. All of which are visible from the back. I stripped mine down as soon as I got it. I don't think there's any moisture sensors either. Maybe on the battery itself? If so just get a new battery
Sent from my MB860 using XDA Premium App
Should I use Isopropyl alcohol or is too late? Remember that yesterday was sunday, so i can buy it on workdays
SolidHelix said:
Pretty sure there are no void stickers on this phone. Also there's only like 5 or 6 screws to take the whole phone apart. All of which are visible from the back. I stripped mine down as soon as I got it. I don't think there's any moisture sensors either. Maybe on the battery itself? If so just get a new battery
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
there are two water indicators, one on the battery and one on the phone under the battery
SkzBR said:
Should I use Isopropyl alcohol or is too late? Remember that yesterday was sunday, so i can buy it on workdays
Click to expand...
Click to collapse
Here are a couple of links to repairs for water damage:
I take no responsibility if following any of the procedures results in worse/more damage
http://www.fiscalgeek.com/2009/06/ff_water_damaged_cellphone/
http://www.gsmindia.in/forum/nokia-hardware-repair-section/18861-how-to-handel-water-damage-handsets-good-guide-here.html
http://techpp.com/2009/12/13/how-to-save-and-repair-your-mobile-phone-after-water-damage/
+1 for the uncooked rice method. tested and proven it works
neotekz said:
there are two water indicators, one on the battery and one on the phone under the battery
Click to expand...
Click to collapse
must have missed that one. phone comes apart real nice though. I bought mine broken. well the volume keys were messed up and the battery cover wouldn't go on right. obviously it was dropped. I took it all apart and when i reassembled it was fixed lol. one little thing around the volume keys must have been out of place. saved $200 of retail for it too
I had same experience. I did the white rice for a couple days, then switched to flower drying crystals. After a while the phone started to boot again.
To dry out the lcd, navigation is your friend. Drove for a good twenty minutes with the screen on and noticed that the streeks were disappearing. After another day, phone was like factory again.
Motorola built this phone right.
Sent from my MB860 using XDA App
Turn on everything( GPS, 4G radio and such) download a new rom and play music through the speaker
I'm hoping to overheat the phone enough to evaporate all the water haha
Well I'll see how it goes and ill report back soon
Sent from my toilet dunked PG86100 using xda premium
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
BlaydeX15 said:
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
Click to expand...
Click to collapse
That^
It worked for my key fob that got lost in the snow for 3 months.
BlaydeX15 said:
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
Click to expand...
Click to collapse
I've done that before but it wasn't exciting haha I thought I'd try this for some laughs but its actually working my cameras lenses that were foggy and aren't now and I keep catching some moisture in the housing
Sent from my PG86100 using xda premium
Ahhhhhhh! No no no!
Take the battery out quick quick quick! If you have water damage the first thing you do is remove power to the device! Water isn't what damages an electronic device. In fact water itself in its purest form H2O isn't even an electrical conductor. Water conducts electricity when something is dissolved in it and the ions dissociate, allowing charge to be carried through the water. Therefore if there is a salt, or something, or in this case dust, it will be able to conduct electricity, which if two points of contact in the device are shorted it can be powerful enough to destroy it.
The rice thing can sometimes work, but if the device had a lot of water get inside it there will be water in all the nook and crannies, even inside the processor. If the physical damage is already done to one or many pieces of the electronics there may not be any fixing it.
However, there is always a possibility that the ionized water is shorting circuits and hasn't damaged anything yet. If the device is to the point where it will no longer turn on, or screen appears dead you have nothing to lose in trying to fix it. I have saved several devices in the scenario I just mentioned using a mild solvent. You need to find a tear down guide to disassemble it. When you have it taken apart you can soak each individual part in isopropyl alcohol. You need to use the purest isopropyl alcohol you can find, ideally 100% isopropyl alcohol so it doesn't contain ANY water. However if you can't find a place to get that quickly, locally, for low cost use 91% isopropyl alcohol from Walmart or any drug store. I have used that concentration to successfully cure two devices that wouldn't turn on after water damage.
Put the alcohol in a large enough container that the parts fit in, and completely submerge the parts, may even need to include the battery in the solution. Leave it there about ten minutes, occasionally swirling to get the alcohol deep inside everything, processor, etc. Then remove it from the alcohol and let it AIR dry. To be ultra safe let it air dry for twenty four hours. You can then reassemble the device and test.
Alcohol is very volatile in air, so it evaporates very quickly (specially if that air is heated). Water and alcohol are miscible, so it will remove the water from inside every part. Good luck!
Just take your phone back to sprint and get another....Im going to assume you have insurance. Why take a chance that the phone could sustain some long term damage? Get a shiny brand new one and call it a day..
SBERG117 said:
Just take your phone back to sprint and get another....Im going to assume you have insurance. Why take a chance that the phone could sustain some long term damage? Get a shiny brand new one and call it a day..
Click to expand...
Click to collapse
I would agree with that but he/she might not have $100 to drop around for a new insurance replacement phone. I have heard though of some repair centers replacing water damaged phones with a sprint ordered replacement as long as the phone works.
Sad Panda is 100% correct on the alcohol, so follow his directions! Alcohol has a high affinity for water and acts as a drying agent, drawing the water out of every corner and crevice.
oldjackbob said:
Sad Panda is 100% correct on the alcohol, so follow his directions! Alcohol has a high affinity for water and acts as a drying agent, drawing the water out of every corner and crevice.
Click to expand...
Click to collapse
+1 sad panda to save the day
Sent from my PC36100 using xda premium
The only sensible thing to do would be to do what sad panda posted. What you're doing is just retarded.
I agree. I've been doing this for years on laptops. It also works well off you spill coke or tea on it. It also helps to brush off the components with a toothbrush while soaking them in alcohol.
Sent from my PG86100 using XDA App
Bag of rice will work 99.9% of the time. Depends on how much water it got will depend on how long u need to leave it in there. If it still turns on overnight should work. Take battery off and seal it up.
Sent from my PG86100 using XDA App
Hate to say it but it actually worked... No fog on the lenses, no foggy screen, capacitive buttons all work and respond, speakers sound just like they did before, I know it might just be dumb luck but it worked out and there's no visible signs of condensation I'm the phone so I'm a happy camper
I've done all the alcohol disassembling before but I only had a T6 instead of a T5 torx and I'm a broke college student so I didn't have rice so I tried my way and it worked! so continue with the bashing if you will
(Btw I have TEP but trying something new felt like a better thing to do than waste $100 on a 1.5 hboot replacement)
Sent from my PG86100 using xda premium
thatguy11285 said:
I'm a broke college student so I didn't have rice so I tried my way and it worked!
Click to expand...
Click to collapse
Dude, a bag of rice is like four dollars.
But your idea is possibly the worst thing you could do for a phone. ONLY reason it worked is because evidently the water didn't seep in enough to cause enough damage.
Running power through a wet phone is the easiest way to kill it. Don't count on it working again for you in the future, you're lucky as hell.
Wow! So happy for you that it worked, don't try it again though! Even for a broke college student a liter of alcohol is two bucks. There are lots of nice guys on here. Even I would have sent you my torx drivers for free to help you out!
Glad everything is a ok! Good job! Phew!
This is hilarious.
Sent from my PG86100 using xda premium
If you have nothing to lose put the phone in bleach. it will bleach the water strip thing back white and leave the red lines. Let it dry then take it to sprint.
but only use this as a last resort. lol
eastside08 said:
If you have nothing to lose put the phone in bleach. it will bleach the water strip thing back white and leave the red lines. Let it dry then take it to sprint.
but only use this as a last resort. lol
Click to expand...
Click to collapse
To my knowledge this won't get the sticker back to white and still maintain the original red lines. Those stickers work just like litmus paper works, they react over the neutral range of the pH scale. Bleach should react with the red chromophores but I just don't see how it will turn from solid red to anything but solid white, or worse a solid pink.
Have you personally tried that? Also bleach is chlorine + water + uhhh, hypochlorite at equilibrium. Since that is the case, the dissociation of ions have the same property as water and salt, or water and dust as I described before, so as long as one understood you are making the water damage worse, you could do that....your electronic device would likely burn up when electricity was applied again.
Just throw it in the microwave. I'd set the microwave to "defrost" though, just to play it safe.
Sent from my PG86100 using XDA App
flonker said:
Just throw it in the microwave. I'd set the microwave to "defrost" though, just to play it safe.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
+ 1
Sent from my PG86100 using xda premium
My daughter god bless her, was playing with my wifes phone taking pictures when as the title suggest she dropped it it in the pool.
I quickly pulled battery and let the heat of the sun dry it out, last night I finally managed to get some rice and let it sit for maybe 9 or so hours.
Powered up just now, camera works but no actual picture is taken, just a blank screen. I had to fix permissions I had a ton of fc errors.
So you think I should open it up and dry it out and maybe spray it down with compressed air?
It still has basic functions working, like phone data ect, just camera seems borked.
Comments withdrawn
I probably would not use or be very cautious with the compressed air, cause it can easily rip parts off the board.
Just look if there's already a sign of corrosion and try to wipe it off.
Sent from my ICS-powered HTC EVO 3D using xda premium
Give it as much time as you can to dry off. Even the memory card. Might want to try to do a full reset and see if that helps.
If you have insurance you might want to look at a few threads here about people being offered the Epic and Original Evo. Don't take anything less than a SGII
Sent from my PG86100 using xda app-developers app
Comments withdrawn
I have a hair dryer so Ill use that.
We are on vacation so Ill have to buy a screwdriver unless the Hotel has a little something available.
Thanks for the detailed links, much appreciated. I too was very surprised it worked, I think my clam shell case helped to keep the water out.
My daughter is happy getting mommy a new phone would have blew it for her getting a phone for back to school.
o0adam0o said:
Give it as much time as you can to dry off. Even the memory card. Might want to try to do a full reset and see if that helps.
If you have insurance you might want to look at a few threads here about people being offered the Epic and Original Evo. Don't take anything less than a SGII
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Insurance, interesting. I do recall this 5 dollar charge for some type of accident insurance. Phone is only 8-9 months old.
Comments withdrawn
3 Deep evo
The problem actually isn't the water usually. It the rust and corroded contacts points left as that water dries. If its been as long as you say be grateful the phone still works at all. Especially the speakers(the water usually kills them on xontact).
With as many hours as you say have passed the damage is done. You need to put it in dry rice or salt or the little sodium pellets IMMEDIATELY
---------- Post added at 10:30 AM ---------- Previous post was at 10:21 AM ----------
zcink said:
I don't if the EVO 3D does but other phones have strips inside that change color once it gets wet. So they can tell if the phone has been immersed in water like dropping it in a toilet or pool.
Its usually the first thing they check for under a warranty claim. They check to see if the phone was immersed in water.
Such a thing is usually not covered under warranty.
Click to expand...
Click to collapse
If you pay for additional insurance you are covered after a fifty to one hundred dollar deductible. Everything is covered..theft,fire,water damage, etc..
If you are under manufacturer warranty only, then you are screwed they will always send the phone back and cite water damage. They only cover manufacturers defects.
Just popping in here, we would use denatured achohol to clean phones, it will evaporate the water from corroding the contacts.
Watch out if you have cuts on your fingers if you try it.
scariola said:
Just popping in here, we would use denatured achohol to clean phones, it will evaporate the water from corroding the contacts.
Watch out if you have cuts on your fingers if you try it.
Click to expand...
Click to collapse
To add to that, a hair dryer or compressed air might actually push water deeper in or, in the hair dryer's case, melt something.
Save the Drama for your Mama with Tapatalk 2
Comments withdrawn
zcink said:
also, pushing water into the hairdryer's case will do nothing to the phone.
Click to expand...
Click to collapse
It's funny how a missing comma can confuse people . I meant that the hair dryer could melt something. The dryer or compressed air could push water deeper into the phone. I fixed my post to clarify.
Save the Drama for your Mama with Tapatalk 2
asdfasdfasd
Comments withdrawn
I have not tried this because mercifully I have not dropped phone in the water yet. But years ago when I had instrumentation on high pressure pipelines, sometimes a seal would break and we would wind up with salt water all in the equipment. We would wash it down with distilled water, then to completely evaporate all the water, we would put it in a vacuum chamber. As the air pressure drops, the boiling point of water drops and the water literally boils away. I wonder if one of those space bags you connect to a vacuum cleaner would draw enough to make that work?
Don't know but something to file away for the next water accident.
Scar is right, we used Denatured Alcohol, every time I saw a phone come in with liquid, one of two things happened:
the customer was an ******* so i sent them on their marry little way to Asurion
OR
I took the phone apart, ignored the LDI's, gave that sucker a good alcohol bath, replaced the part malfunctioning like in your case the camera and gave it back to them.
I personally (just me) wouldn't use a blow dryer on anything like this, those parts are sensitive to heat unless you know what you're doing. I'm sure you can find a nice tech and they'll try and fix it for ya or they'll replace it unless you dont have TEP then you're screwed both ways, and for that I'm sorry
Funny I was thinking alcohol as well.
I have the phone apart now, it was super easy and the hotel im in had a nice screw driver set.
I have several sd cards and few new sims i can activate a new one when i get home.
Back in the day when I benched pc's I sprayed the motherboard and gpu with conformal spray ( we have it at work) Wondering if that would stop any corrosion from occurring.
Im not against trying for warranty but its my fault not failure so I would be upfront and see what if anything they would do. I have 3 lines and 7 year customer, maybe that will mean something.
Thanks for all the advice and suggestions, very much appreciated
Sorry to be off topic but it is sorta still on topic.. ill explain...
I got a macbook pro from someone the other day. They spilled milk on it and the keyboard doesnt work. I was gonna get some denatured alcohol and clean it but ive never done it. How would this be done? Do you actually just sit the board in it for a couple hours or do you just wipe it down with something, if so, what? Im also wondering this just in case i need to do this to any other electronic, like my 3d. Thanks for any help guys.
youdug said:
Sorry to be off topic but it is sorta still on topic.. ill explain...
I got a macbook pro from someone the other day. They spilled milk on it and the keyboard doesnt work. I was gonna get some denatured alcohol and clean it but ive never done it. How would this be done? Do you actually just sit the board in it for a couple hours or do you just wipe it down with something, if so, what? Im also wondering this just in case i need to do this to any other electronic, like my 3d. Thanks for any help guys.
Click to expand...
Click to collapse
I use denatured alcohol with qtips or kimwipes which is lint free wipes.if you use qtips make sure you aren't leaving lint behind.also for any litmus papers which have been set off I will tell you bleach works magic
sent from my BAD A$$ Epic touch
So my girlfriend dropped her phone in a cup holder with water in it today. Everything works but it's getting hot, and I couldn't get to it in time to pull the battery and disassemble. It's mainly working, but gets warm and eats battery violently. Has anyone had any luck with the rubbing alcohol bath trick on one of these? I'm not sure how they may react. Some things are getting a bit more sensitive these days.
Side note... If anyone has a main-board laying around from an old busted phone or anything, let me know. She's not pleasant when she's disconnected from the facebook world. The sooner I get this done, the sooner my ear stops bleeding.
BoominSVX said:
So my girlfriend dropped her phone in a cup holder with water in it today. Everything works but it's getting hot, and I couldn't get to it in time to pull the battery and disassemble. It's mainly working, but gets warm and eats battery violently. Has anyone had any luck with the rubbing alcohol bath trick on one of these? I'm not sure how they may react. Some things are getting a bit more sensitive these days.
Side note... If anyone has a main-board laying around from an old busted phone or anything, let me know. She's not pleasant when she's disconnected from the facebook world. The sooner I get this done, the sooner my ear stops bleeding.
Click to expand...
Click to collapse
Put it in a bowl of rice with the bowl sitting on a heating pad set to high for 24-48 hours. Dont power on the phone in this time and make sure the battery is removed. Also ensure that its the phone getting hot and not the battery.
Sent from my MB855 using xda premium
Yeah when my phone went for a swim, I dove in to the pool after it. I think I ripped the battery out of it even before I was fully out of the water. I had to let it sit in rice for two days until I could no longer see water between the glass and LCD.
And even then, I opened it up and scrubbed the motherboard down with a stiff toothbrush and 91% rubbing alcohol, I wouldn't suggest dousing the phone in it, though.
Bock Abrams said:
Yeah when my phone went for a swim, I dove in to the pool after it. I think I ripped the battery out of it even before I was fully out of the water. I had to let it sit in rice for two days until I could no longer see water between the glass and LCD.
And even then, I opened it up and scrubbed the motherboard down with a stiff toothbrush and 91% rubbing alcohol, I wouldn't suggest dousing the phone in it, though.
Click to expand...
Click to collapse
I've taken phones that people could only find by calling it and seeing it light up in a puddle and saved them two days later. The trick was always get the water off and replace it with something pure so iron and zinc deposits can't complete a random circuit. Rubbing alcohol baths and a toothbrush have been common here, followed by compressed air, and finally rice for a day. It almost ALWAYS works, but this one is failing. Maybe I'll just buy a new board. To bad because the phone is still beautiful.
BoominSVX said:
I've taken phones that people could only find by calling it and seeing it light up in a puddle and saved them two days later. The trick was always get the water off and replace it with something pure so iron and zinc deposits can't complete a random circuit. Rubbing alcohol baths and a toothbrush have been common here, followed by compressed air, and finally rice for a day. It almost ALWAYS works, but this one is failing. Maybe I'll just buy a new board. To bad because the phone is still beautiful.
Click to expand...
Click to collapse
You could always buy a water sensor sticker off ebay and replace the one in your phone that is red then take it into sprint and just say its acting funky and you want it repl........ Wait, thats illegal, dont do that.....
Sent from my MB855 using xda premium
Acvice said:
You could always buy a water sensor sticker off ebay and replace the one in your phone that is red then take it into sprint and just say its acting funky and you want it repl........ Wait, thats illegal, dont do that.....
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
I had a bad experience with some half breed store breaking her old phone and trying to tell me it was water damaged. After fighting city hall and just hearing "water damage", I took it apart myself, and what do you know... NO WATER DAMAGE! The guy tried to pass it off like water broke it when HE actually did. They stood there and told me that since her (previously working) phone was now dead, the only way I was leaving the shop with a working phone was if I bought a new one. I was furious to see it not show any signs of water, and after a few more calls, I took it to a corporate store and let them take it apart. Finally, the previous notes on the account were over-ridden, and retentions sent me out a replacement for 100 dollars. Three days later, I looked at craigs and found 4 of the same phone for 100 bucks (TouchPro2) and decided insurance isn't worth it. I've never looked back, and I can still even now buy a board or a whole photon for less than the insurance charges. Just missed one on ebay for 42 bucks, but tomorrow is a new day with new auction endings.
PS, She uses sprint as a family plan. I use boost on my epic, and now at 35 bucks a month, I've never looked back from leaving sprint. They can keep their BS insurance and false hopes of 4g. They charge her an additional 10 bucks a month for a "4g device", and we've never even been able to see the icon work. A year from now, she can actually upgrade to an LTE phone when the contract runs out, but until that, ....WOW cell phone companies really suck. I don't even think I should post this.
Yep. On Monday I dropped my S4 in the pool and it spend a good 20 seconds underwater. It was in the deepest part of my pool and I wasn't about to jump into the cold water to get it. I have insurance and all that, so I just grabbed a net and pulled it out.
I was almost certain that this phone wouldn't be working no matter what I did. Still, I pulled the battery out the second I got it out of the water and stuck it in rice for about 24 hours. The first 10 hours or so I left it in a hot room that may have had 10% humidity, and the last 14 hours I put it in a dry, cold room.
Lo and behold this morning when I put the battery in and held the power button, it powered up! Everything works - earpiece, speaker, both mic's, notification light, proximity, IR, screen, digitizer, headphone jack, capacitive buttons/lights, home button, etc. etc. Everything works!
Pretty awesome to be honest, Wanted to gloat a bit.
Had that happen to my S3. It worked pretty good for a few days and then it would get VERY hot and battery would only last about 4 hours.
I found some corrosion on the mobo from the chlorinated pool water. Perhaps you won't have that issue but if you do, PM me and I'll let you know what drastic measure I took to fix it. I rather not put it out there to all in fear someone will do it and then blame me for any issues they have lol.
It took nothing but about $7.00 and my time.
Good luck!
video or it didn't happen.
haha jk that's awesome man!
This has inspired me to start showering with my phone.
Sent from my SCH-I545 using Tapatalk
That's a awesome story there glad it still worked I do have a question did you have a case or no if so what?
FYI, If this happens to anyone else:
If an electronic device gets dunked in water one thing you can do is to disassemble it as far as you're comfortable doing and then re-dunk the device in distilled water. The distilled water will help remove residues left behind by tap water or pool water. Works best when said device is still wet from original dunk.
Then if you have some on hand, an electronics circuit cleaner can be sprayed liberally all over and in to displace the remaining water. The cleaning solvent will evaporate much faster and safer for the device.
Then I'd stick said device in a bag of rice in a heated room. And pray. Because more often then not it won't matter what you do the device will still be ruined.
Tried to recreate the pool drop......phone DID work fine, but screen cracked when it hit the ice. Gotta love Wisconsin!
Thats such crap! i get pulled into a pool by drunk friend with the S4 in my pocket. Wasnt even in the water for 10 seconds and my S4 never ever turned on again. I guess they are not all made equal lol
0reo said:
FYI, If this happens to anyone else:
If an electronic device gets dunked in water one thing you can do is to disassemble it as far as you're comfortable doing and then re-dunk the device in distilled water. The distilled water will help remove residues left behind by tap water or pool water. Works best when said device is still wet from original dunk.
Then if you have some on hand, an electronics circuit cleaner can be sprayed liberally all over and in to displace the remaining water. The cleaning solvent will evaporate much faster and safer for the device.
Then I'd stick said device in a bag of rice in a heated room. And pray. Because more often then not it won't matter what you do the device will still be ruined.
Click to expand...
Click to collapse
That sounds like it would be a good idea, using a clean water without any minerals, chemicals, etc. in it to go ahead and flush everything out. I didn't do this. I was cleaning my pool mainly because it hadn't been touched in a while and there wasn't any chlorine in the water. Usually that's bad for a pool owner, algae, but for me this time it seems to have been a blessing.
Gator Brah said:
Thats such crap! i get pulled into a pool by drunk friend with the S4 in my pocket. Wasnt even in the water for 10 seconds and my S4 never ever turned on again. I guess they are not all made equal lol
Click to expand...
Click to collapse
It also depends on how well taken care of the water is. If it had a high chlorine level it can cause corrosion much faster than usual.
swordmastr54 said:
That's a awesome story there glad it still worked I do have a question did you have a case or no if so what?
Click to expand...
Click to collapse
Yep! I had this Cruzer-Light case on my phone at the time. It's extremely tight fitting on the device, usually peels off the back-cover whenever I take it off. I'm sure it helped because it sealed the edges along the back cover.
The water-strip underneath the battery on the phone and the strip on the battery triggered, but I didn't find any water on the SDCard or the SIM. So maybe the case helped with that a little bit.
Wow, that's amazing!