Hello,
I'm still new with S3.
I saw many of the custom ROMs are XXALF2, my build number ends with XXALEF. Is there any difference?
Sent from my GT-I9300 using Tapatalk 2
XXALF2 is newer, UK release.
Other differences are difficult to confirm objectively, Samsung never release changelogs.
Firmware dates and details here.
It' s possible to know which are differences between alef/alf2 and ale8?
All you can do is read the web and the xda forums and some of that is guesswork .
Change logs are not published .
jje
I cannot find a post that explains differences between ale8 and uk stock rom. Please help. It's only country and modem?
B3311 said:
XXALF2 is newer, UK release.
Other differences are difficult to confirm objectively, Samsung never release changelogs.
Firmware dates and details here.
Click to expand...
Click to collapse
Oh. So, can I flash these ROMs?
Sent from my GT-I9300 using Tapatalk 2
romeo57 said:
Oh. So, can I flash these ROMs?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes using odin to flash. You can flash the stock rom. My phone comes with ALE8 and two days ago I've flashed ALF2. No problems here.
cybdani said:
Yes using odin to flash. You can flash the stock rom. My phone comes with ALE8 and two days ago I've flashed ALF2. No problems here.
Click to expand...
Click to collapse
Alright. Odin? I'm still learning about all these. I have Asus Transformer Prime. Is odin same as CWM/TWRP?
Sent from my GT-I9300 using Tapatalk 2
cybdani said:
I cannot find a post that explains differences between ale8 and uk stock rom. Please help. It's only country and modem?
Click to expand...
Click to collapse
Here is ALE8 various versions including what you call stock UK
XXALE8
Firmware Info
PDA: XXALE8
Phone: XXLE8
Date: 13/05/2012
Android Version: 4.0.4
BTU (UK) Also contains (CPW DBT ITV KOR XEF XEO): Download
DBT (Germany): Download
EUR (Greece): Download
INU (India): Download
ITV (Italy): Download
LUX (Luxembourg): Download
NEE (Nordic): Download
PHN (Netherlands): Download
THL (Thailand) Also for (GLB MM1 SIN SMA STH XEV XME
Here is the last UK stock firmware .
XXALF2
Firmware Info
PDA: XXALF2
Phone: XXLF2
Date: 05/06/2012
Android Version: 4.0.4
BTU (UK) Also contains CSC (CPW DBT ITV KOR XEF XEO):
Again stock UK with various other countries .
ALE8 is the firmware build number and released for a number of different locations as many firmwares are .
STOCK FIRMWARE
http://forum.xda-developers.com/showthread.php?t=1671969
jje
romeo57 said:
Alright. Odin? I'm still learning about all these. I have Asus Transformer Prime. Is odin same as CWM/TWRP?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Do some reading before you try to flash anything, or things could get messy...
Read this guide very carefully, follow it to the letter and you'll be OK.
B3311 said:
Do some reading before you try to flash anything, or things could get messy...
Read this guide very carefully, follow it to the letter and you'll be OK.
Click to expand...
Click to collapse
Wow. Much more complicated than Prime.
Will try to understand before flashing.
Thanks for the help!
Sent from my GT-I9300 using Tapatalk 2
B3311 said:
XXALF2 is newer, UK release.
Other differences are difficult to confirm objectively, Samsung never release changelogs.
Firmware dates and details here.
Click to expand...
Click to collapse
I still don't understand. Do I have to match the baseband in order to update my firmware, or root?
Here's my info, if it's any help.
Model number : GT-I9300
Android version : 4.0.4
Baseband version : I9300DXLE9
Build number : IMM76D.I9300XXALEF
Sorry if this troubles you.
Sent from my Transformer Prime TF201 using Tapatalk 2
JJEgan said:
Here is ALE8 various versions including what you call stock UK
XXALE8
Firmware Info
PDA: XXALE8
Phone: XXLE8
Date: 13/05/2012
Android Version: 4.0.4
BTU (UK) Also contains (CPW DBT ITV KOR XEF XEO): Download
DBT (Germany): Download
EUR (Greece): Download
INU (India): Download
ITV (Italy): Download
LUX (Luxembourg): Download
NEE (Nordic): Download
PHN (Netherlands): Download
THL (Thailand) Also for (GLB MM1 SIN SMA STH XEV XME
Here is the last UK stock firmware .
XXALF2
Firmware Info
PDA: XXALF2
Phone: XXLF2
Date: 05/06/2012
Android Version: 4.0.4
BTU (UK) Also contains CSC (CPW DBT ITV KOR XEF XEO):
Again stock UK with various other countries .
ALE8 is the firmware build number and released for a number of different locations as many firmwares are .
STOCK FIRMWARE
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Thanks a lot for your help. Understood
Great forum!
cybdani said:
Thanks a lot for your help. Understood
Great forum!
Click to expand...
Click to collapse
As long as you follow a flashing guide to a TEE (do not skip any steps and do not TL;DR anything). Golden Rule #1 of Flashing: NEVER TICK RE-PARTITION.
Have fun with your phone ^^ (I have same tablet as you).
B3311 said:
XXALF2 is newer, UK release.
Other differences are difficult to confirm objectively, Samsung never release changelogs.
Firmware dates and details here.
Click to expand...
Click to collapse
Ok. After a lot of reading, I still don't understand much.
I'm new with Samsung devices, so bare with me with my noob questions.
1. The different basebands are for the languages or the system?
I'm from Malaysia with the baseband of DXLE9. Build XXALEF.
Can I flash with different baseband & build? Or the baseband have to be the same?
2. How about rooting?
Should I follow the baseband & build versions or straight away root?
Sent from my GT-I9300 using Tapatalk 2
romeo57 said:
Ok. After a lot of reading, I still don't understand much.
I'm new with Samsung devices, so bare with me with my noob questions.
1. The different basebands are for the languages or the system?
NONE its the modem
I'm from Malaysia with the baseband of DXLE9. Build XXALEF.
Can I flash with different baseband & build? Or the baseband have to be the same?
You can but as above baseband is not the firmware .
2. How about rooting?
Should I follow the baseband & build versions or straight away root?
Again baseband is not what you want .
All instructions on page one.
http://forum.xda-developers.com/showthread.php?t=1671969
PDA refers to the build version of the software/firmware
Phone refers to the baseband/modem version
jje
Click to expand...
Click to collapse
JJEgan said:
romeo57 said:
Ok. After a lot of reading, I still don't understand much.
I'm new with Samsung devices, so bare with me with my noob questions.
1. The different basebands are for the languages or the system?
NONE its the modem
I'm from Malaysia with the baseband of DXLE9. Build XXALEF.
Can I flash with different baseband & build? Or the baseband have to be the same?
You can but as above baseband is not the firmware .
2. How about rooting?
Should I follow the baseband & build versions or straight away root?
Again baseband is not what you want .
All instructions on page one.
http://forum.xda-developers.com/showthread.php?t=1671969
PDA refers to the build version of the software/firmware
Phone refers to the baseband/modem version
jje
Click to expand...
Click to collapse
Thank you for the help!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Related
hello guys
i am new to android OS...that means a n00b... but i have successfully root my phone with this kernel http://forum.xda-developers.com/showthread.php?t=1075278
currently Kies gives me this info:
Current firmware version: PDA:KE2 / PHONE:KE2 / CSC:KD1 (VNO)
Baseband ver: I9100UHKE2
Kernel version: 2.6.35.7-I9100XWKE2-CL187606 [email protected] #2
Android ver: 2.3.3
Build number: GINGERBREAD.UHKE2
what i would like to do now is to update to the latest firmware is that possible?
thanks
Hi,
If Kies shows no update, you'll have to go the route of manually updating via Odin.
This guide shows you how, don't make the mistake I did of downloading the kernel only tar file - you need the big file around 250/260 MB.
http://forum.xda-developers.com/showthread.php?t=1075278
bracketb4d said:
Hi,
If Kies shows no update, you'll have to go the route of manually updating via Odin.
This guide shows you how, don't make the mistake I did of downloading the kernel only tar file - you need the big file around 250/260 MB.
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Hi,
but this file has the latest firmware in it? because from the info:
UHKE2
Firmware info
PDA:UHKE2
PHONE:UHKE2
Build date: 11/05/2011
Generic CHO (Chile): http://www.multiupload.com/J3L6OOPXC7
UHKE2 Stock Kernel:http://www.multiupload.com/18GRITPN4M
Password: [email protected]
the build date is 11/05/2011 is almost same as the 1 current i am using...?
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
DM-Man said:
Hi,
but this file has the latest firmware in it? because from the info:
UHKE2
Firmware info
PDA:UHKE2
PHONE:UHKE2
Build date: 11/05/2011
Generic CHO (Chile): http://www.multiupload.com/J3L6OOPXC7
UHKE2 Stock Kernel:http://www.multiupload.com/18GRITPN4M
Password: [email protected]
the build date is 11/05/2011 is almost same as the 1 current i am using...?
Click to expand...
Click to collapse
Hi DM-Man,
As far as I know there is no official update for any Chilean device.
The only way to enjoy other versions is as already said to "manually" change via odin.
The "Chile thread" can be found here: http://forum.xda-developers.com/showthread.php?t=1104410
Best regards.
JJEgan said:
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
Click to expand...
Click to collapse
thanks for the info...but from what i read is any way if i change the CSC that it could pick up the updates?
JJEgan said:
Then their is no later firmware on XDA you will either have to source it yourself or use Checkfus .
http://forum.xda-developers.com/showthread.php?t=834884
You could even look at the Chile thread right under this thread .
jje
Click to expand...
Click to collapse
can you assist me as to summarize which kernel & rom i will need if i update it manually?
DM-Man said:
thanks for the info...but from what i read is any way if i change the CSC that it could pick up the updates?
Click to expand...
Click to collapse
You can always update through Odin and get the latest software from e.g. Intratech's ROM thread. Carriers usually do not update that frequently and you may be stuck a long time to a version.
If you want to use the Chilean CSC then you have either the old seldom updateable official ROM option or you have an always manually updateable "Frankenstein" ROM option.
UHKG7
Firmware info
PDA:UHKG7
PHONE:UHKG4
Build date: 27/07/2011
Android 2.3.4
VNO, TDR, TTT: http://www.multiupload.com/PBGWY6EN58
TPA (Costa Rica I think): http://www.multiupload.com/V1OJ9W6PXS
UHKG7 Stock Kernel: http://www.multiupload.com/NU4TIWYETE
Password: [email protected]
and do i download the file for, VNO, TDR, TTT?
also do i need to flash the kernal as well or is that just for rooting?
I am on a three, but unlocked contract phone, UK
pics of phone info attached
thanks for help
or is this one better?
I9100XXKG5 2.3.4 2011 August 2 CSC = XEUKG5, from samfirmware
KG7 is later than KG 5 your choice or read the KG5/7 posts in the stock rom thread .
jje
JJEgan said:
KG7 is later than KG 5 your choice or read the KG5/7 posts in the stock rom thread .
jje
Click to expand...
Click to collapse
So for the KG7 do I download the VNO, TDR and TTT file and flash it under PDA in odin?
So for the KG7 do I download the VNO, TDR and TTT file and flash it under PDA in odin?[
Click to expand...
Click to collapse
VNO is a csc file and you would use the csc button in Odin.
you only need to use the csc if you need the network settings for your country.
So what one do I flash to update my phone from its current 2.3.3 firmware to 2.3.4?
Are you trying to update your firmware or your kernel .
Firmware is here stock Samsung follow the instructions .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
JJEgan said:
Are you trying to update your firmware or your kernel .
Firmware is here stock Samsung follow the instructions .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Well probably both, so firmware I flash using the pda option and then how do I upgrade kernel?
nraman1 said:
Well probably both, so firmware I flash using the pda option and then how do I upgrade kernel?
Click to expand...
Click to collapse
Go to the first post of the link jjegan posted. It has instructions and pictures.
Sent from my GT-P1000 using xda premium
Ok thanks for your help
Hey guys,
I flashed a custom kernel and i'm don't be satisfied with it. Can you guys say me how I can revert my phone back to stock and get away this triangle and the reset the counter?
Thanks Jahai
Sent from my GT-I9100G using xda premium
Which custom rom did you use?
Sent from my GT-I9100G using XDA App
ronhoover88 said:
Which custom rom did you use?
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
A kernel called superatmos.
Sent from my GT-I9100G using xda premium
Restore your Nandroid backup .
A flash stock kernel or
B flash full firmware
Both found via Search .
jje
Jahai said:
A kernel called superatmos.
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Not kernel,What stock ROM/Firmware do you want??
If you only want the stock kernel then you will need to give us the original firmware you have on your phone.
unable to locate stock rom
I have recently purchased an sgs2 (actually came to my senses and swapped it for a blackberry) and have been scouring the forum for information on how to restore the rom to stock so I have a base to start from. I am new to Android so excuse my ignorance on this. If I do a *#1234# I get the following:
PDA: I9100XXKI3
PHONE: I9100XXKI3
CSC: I910OXAKI3
Build Info: Thu Sep 15 13:53:07 KST 2011
I am based in South Africa and can use the phone as normal but it does currently seem to be a bit unstable and the Market Place crashes fairly regularly on the phone. My carrier is Vodacom South Africa and from research the ROM I have on the phone is a generic for Europe (not sure if this is relevant).
In Kies, there is a message that says updates cannot be done using KIES.
I have tried download the stock ROM from the links on the forum but multiupload.com seems to be down or has very high congestion.
HELP PLEASE!!!
cooza said:
Not kernel,What stock ROM/Firmware do you want??
If you only want the stock kernel then you will need to give us the original firmware you have on your phone.
Click to expand...
Click to collapse
I only want to go back to stock ROM, German unbranded stock ROM. doesn't matter what firmware.
Sent from my GT-I9100G using xda premium
Jahai said:
I only want to go back to stock ROM, German unbranded stock ROM. doesn't matter what firmware.
Find in the stock rom thread .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
Bazilla said:
I have tried download the stock ROM from the links on the forum but multiupload.com seems to be down or has very high congestion.
HELP PLEASE!!!
Click to expand...
Click to collapse
Multiupload closed by the FBI .
Use Sammobile.com or a Google search for the firmware .
jje
Click to expand...
Click to collapse
which is the correct
Jahai said:
Use Sammobile.com or a Google search for the firmware .
Click to expand...
Click to collapse
The real question I have is which is the correct ROM to download? There is such a lot of information that I am totally confused now.
On all the posts I've seen so far the one to download for South Africa could be many different versions. What is the relevance of this information?
XWKI4
Firmware info
PDA:XWKI4
PHONE: XXKI1
Date: 14/09/2011
Android 2.3.4
What information do I use to determine the correct version of file to download. I am completely confused by the mass of information available, especially considering my phone is currently running what I assume to be XXKI3 which is non south african.
Could it be that my phone was originally purchased in Europe? If thisd is so should I be installing a version of ROM for that region or will any region do?
Bazilla said:
The real question I have is which is the correct ROM to download?
What firmware was on the phone originally or what firmware do you want .
Could it be that my phone was originally purchased in Europe?
Who knows ???
CSC: I910OXAKI3 but that reads as Polish CSC from memory .
Its normal to download the firmware for the location the phone is being used in .
Its also usual to download the latest version .
Its the CSC that gives local network details and the baseband /modem that may be changed if poor reception .
XILA2
Android 2.3.6
This package has: PDA: XILA2| Modem/phone: XXKL1| CSC: XEUKH2
Latest posted for the UK .
I would flash that enter network settings if needed manually .
CSC or modem can be changed later .
Note multiupload is closed down for good you will need a Google search or Sammobile .com for firmware .
jje
Click to expand...
Click to collapse
Jahai said:
I only want to go back to stock ROM, German unbranded stock ROM. doesn't matter what firmware.
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Here mate.Dont think it has a password but if it asks for one when you unzip it try samfirmware.com or samsung-firmwares.com
XXLA1 2.3.6 Open Germany i9100G
http://www.hotfile.com/dl/147226259/a5d1655/I9100GXXLA1_I9100GDBTKL2_DBT.zip.html
---------- Post added at 03:05 AM ---------- Previous post was at 02:50 AM ----------
Bazilla said:
The real question I have is which is the correct ROM to download? There is such a lot of information that I am totally confused now.
On all the posts I've seen so far the one to download for South Africa could be many different versions. What is the relevance of this information?
XWKI4
Firmware info
PDA:XWKI4
PHONE: XXKI1
Date: 14/09/2011
Android 2.3.4
What information do I use to determine the correct version of file to download. I am completely confused by the mass of information available, especially considering my phone is currently running what I assume to be XXKI3 which is non south african.
Could it be that my phone was originally purchased in Europe? If thisd is so should I be installing a version of ROM for that region or will any region do?
Click to expand...
Click to collapse
Download this stock ROM.Possibly no password but as I posted before if it asks for one try samfirmware.com or samsung-firmwares.com
http://hotfile.com/dl/145847543/170c2ed/I9100XWKI4_I9100OJCKI1_XFA.zip.html
This is a South African Firmware and although its 2.3.4 it contains the regional info (CSC) that you need to make it stable.Dont forget to do a factory reset after flashing.
Hi
Im new here and new to samsung as i purchased a S3 and absolutely love it so far (goodbye iphone!)
The item is on the network '3' and locked to 3 so what i want to do is debrand the phone so there would be no more 3 pre-installed apps and logos and then root the phone and try the voodoo unlock app to try and unlock it.
I know how to root the phone and install the apk file I am just confused on how to debrand the phone using odin, i do not know which specific firmware I should be using.
I would REALLY APPRECIATE it if someone could send me a direct download link to the network/carrier free firmware that I need to flash my phone and the specific version of Odin that I need and a video/picture tutorial on how to flash as i have never flashed android firmwares.
Here are some details which may help:
Model number: GT-I9300
Android version: 4.0.4
Product code:
firmware version: AP: I9300XXALF6
CP: I9300NELF1
CSC:I9300H3GALF1
kERNEL version: 3.0.15-705505-user se.infra:SEP-65 #1
For some reason when I type the code *2767*4387264636# to find out my phones product code nothing comes up.
Thank you in advance!
You need to root via Odin.
Then flash this following ops instructions via recovery
http://forum.xda-developers.com/showthread.php?t=1704185
Sent from my GT-I9300 using xda premium
Any UK firmware is what i would use ,
But flashing stock firmware via Odin you may lose any upgrade path through Kies and OTA in the future , Nobody on xda needs them any way .
http://forum.xda-developers.com/showthread.php?t=1646610
network problems after you can always flash the 3 modem from the modems thread .
jje
currently i am downloading:
I9300XXBLG8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLG8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLG8
CSC: OXABLG8
Change List: 928452
from this thread: http://forum.xda-developers.com/showthread.php?t=1646610
will this firmware work?
thanks for both your inputs guys
yes thats fine its what i use alongside the 3 modem
slizza786 said:
currently i am downloading:
I9300XXBLG8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLG8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLG8
CSC: OXABLG8
Change List: 928452
from this thread: http://forum.xda-developers.com/showthread.php?t=1646610
will this firmware work?
thanks for both your inputs guys
Click to expand...
Click to collapse
haha just realised its the same one slking1989 posted.
treble4 said:
yes thats fine its what i use alongside the 3 modem
Click to expand...
Click to collapse
Do i need to change my CSC? what does CSC stand for and what does it do?
Thank you
slizza786 said:
Do i need to change my CSC?
No only if you hit network problems .
what does CSC stand for and what does it do?
http://forum.xda-developers.com/showthread.php?t=1671969
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
jje
Click to expand...
Click to collapse
Hi all - quick question?
Im using I9300XXBLG8 at the moment and decided to flash the 3 uk modem I9300NELE4 but now no one can hear me and i cant hear them, any ideas why and how to get it to work together?
Thanks
I'm on 3 UK and use the latest lg8 modem, working well for me
Sent via TCP/IP
JJEgan said:
Any UK firmware is what i would use ,
But flashing stock firmware via Odin you may lose any upgrade path through Kies and OTA in the future , Nobody on xda needs them any way .
http://forum.xda-developers.com/showthread.php?t=1646610
network problems after you can always flash the 3 modem from the modems thread .
jje
Click to expand...
Click to collapse
Am on three network I have upgraded to the latest firmware via Odin and unbranded but I noticed my 3g connection Is very poor this wasn't the case before I debranded I don't want to root but can I flash the 3modem separately? And please post the link the to the modems thread I can't seem to find it .
Sent from my GT-I9300 using xda app-developers app
http://dl.dropbox.com/u/19780267/Modems/modem_CWM_I9300NELF1.zip this is the latest 3 modem flash with odin
http://forum.xda-developers.com/showthread.php?t=1740061
I have an unlocked s3 originaly from three.co.UK now using on t-mobile
Sent from my GT-I9300 using xda premium
Is this update?
Skickat från min GT-I9300 via Tapatalk 2
meant to say.... is this up to date? as the phone has been unlocked i am unsure How i will recieve updates.
What do you mean is it up to date ??
What does KIES say ???
Ask 3 UK what their latest firmware is ..
You are dependent upon your vendor to push out the updates
Or are you asking is what is the last released firmware that may not be for your phone ??
LG8 LG9 some countries only LH1 some countries only modem only update .
You could join XDA Developers and flash whatever you want .
jje
KIES says it is uptodate. ut i see there are more recent ones on xda.
This phone was bought via ebay as unlocked, i am using a t mobile sim , I have no idea if i should expect t mobile/samsung or three.co.uk (who the phone is from originally) to update any firmware. I am not keen on rooting and flashing as everything is working and i am more concerned about a reliable device. I guess there are differences if done OTA or via USB/Kies ?
felixthecat said:
KIES says it is uptodate. ut i see there are more recent ones on xda.
Yes but not for your phone but they will work on your phone .
This phone was bought via ebay as unlocked, i am using a t mobile sim , I have no idea if i should expect t mobile/samsung or three.co.uk (who the phone is from originally) to update any firmware.
The original seller 3UK is your update souirce ..
I am not keen on rooting
But a stock rom does not require rooting its a standard Samsung rom
and flashing as everything is working and i am more concerned about a reliable device. I guess there are differences if done OTA or via USB/Kies
OTA is usually a smaller patched firmware Kies would be a full rewrite .
But thats guesswork not seen Kies or OTA on my phones for years .
99% of XDA involves rooting or flashing as that's why we exist .
jje
Click to expand...
Click to collapse
thanks for your help
just flashed LG8 using this post.. phew..
I9300XXBLG8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLG8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLG8
CSC: OXABLG8
Change List: 928452
Separate Kernel: Download (.TAR)
Separate Modem: Download (.TAR)
http://forum.xda-developers.com/showthread.php?t=1646610
your right no need to root as is an official ROM, three.co.uk stuff has gone. not sure how i will update from now on.
felixthecat said:
thanks for your help
just flashed LG8 using this post.. phew..
I9300XXBLG8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXBLG8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLG8
CSC: OXABLG8
Change List: 928452
Separate Kernel: Download (.TAR)
Separate Modem: Download (.TAR)
http://forum.xda-developers.com/showthread.php?t=1646610
your right no need to root as is an official ROM, three.co.uk stuff has gone. not sure how i will update from now on.
Click to expand...
Click to collapse
Same method probably even the same thread
Sent from my GT-I9300 using xda premium
however now using Kies it says your device does not support software upgrading via vies. I guess i may get OTA ones.
If Kies says this, your phone isnt on the software version it shipped with.
is that a problem ?, i guess it is because i flashed the above ?
felixthecat said:
is that a problem ?, i guess it is because i flashed the above ?
Click to expand...
Click to collapse
You could join XDA Developers and flash stock firmware or branded firmware or via CHECKFUS .
About time OTA and KIES where banned on this forum .
jje