Over the past 3 days I haven't been able to make/receive phone calls/texts while I'm in my neighborhood (which normally I get great service on 3g/4g). Literally everywhere else my phone works perfectly. I called sprint and they said to take the phone to a store, which I did, and the store replaced it. After work when on my way home I made call just to test if that fixed the issue and it didn't, still not able to make phone calls/text messages in my neighborhood but data still works. Also we have 4 other phones on sprint none of which are lte devices and all are working perfectly which makes me think something in the tower is messed up or they're upgrading something but if I'm not mistaken sprint's voice/texts go through their 1x network. I'm confused, called sprint again and they're sending me that airwave(I don't know if that's what its called) for free. I hope this will fix it but does anybody know what it could be/if anyone else has experienced this? Maybe someone from sprint who's on here could enlighten me as to what's going on?
Thanks,
-S
When you say great 3g/4g, you mean wimax? No lte out. I get bad reception in my house and a few other areas, but so do all sprint phones. Weird that it's just affecting you.
Also, I've heard many people say sprint is giving them a free airrave, but then still get a monthly charge for that. Maybe it's changed but double check that.
Sent from my LTEvo
Yea I meant wimax when I had the galaxy s2...and yea I'll definitely keep an eye out for that...I asked the person on the phone 3 different times if there would be anything added to my monthly bill or a one time fee and she said no b/c I didn't even request for one, I was simply just trying to find out if something was going on with the tower since we narrowed it down to the 1x network which wasn't working on my phone at the tower I was connected to...and randomly I get transferred and she says we will be sending you one...so I definitely didn't say no
painkillaz said:
Over the past 3 days I haven't been able to make/receive phone calls/texts while I'm in my neighborhood (which normally I get great service on 3g/4g). Literally everywhere else my phone works perfectly. I called sprint and they said to take the phone to a store, which I did, and the store replaced it. After work when on my way home I made call just to test if that fixed the issue and it didn't, still not able to make phone calls/text messages in my neighborhood but data still works. Also we have 4 other phones on sprint none of which are lte devices and all are working perfectly which makes me think something in the tower is messed up or they're upgrading something but if I'm not mistaken sprint's voice/texts go through their 1x network. I'm confused, called sprint again and they're sending me that airwave(I don't know if that's what its called) for free. I hope this will fix it but does anybody know what it could be/if anyone else has experienced this? Maybe someone from sprint who's on here could enlighten me as to what's going on?
Thanks,
-S
Click to expand...
Click to collapse
Did you recently use the google voice integration? I did early on when they offered it and it borked my calling and texts but not data. It carried over from phone to phone, blackberry and two different android phones, as it is an issue with the line. If so disable the gv intergration and call Customer service until you get a tech that understands that gv may have borked it and resets the line with the network. It took me nearly a month to get mine fixed (in store, online,and by phone repeatedly) and when I finally got a hold of someone who understood my problem it was fixed in 10 minutes.
Crowordove said:
Did you recently use the google voice integration? I did early on when they offered it and it borked my calling and texts but not data. It carried over from phone to phone, blackberry and two different android phones, as it is an issue with the line. If so disable the gv intergration and call Customer service until you get a tech that understands that gv may have borked it and resets the line with the network
Click to expand...
Click to collapse
Were you not able to call at all anywhere? Because the Only time this happens for me is when I'm in my neighborhood/house Even though I still have the 3g symbol up and 4 out of 5 bars. And this started 3 days ago now, and I have had google voice integrated since before I had the evo 4g lte.
painkillaz said:
Were you not able to call at all anywhere? Because the Only time this happens for me is when I'm in my neighborhood/house Even though I still have the 3g symbol up and 4 out of 5 bars. And this started 3 days ago now, and I have had google voice integrated since before I had the evo 4g lte.
Click to expand...
Click to collapse
Well it's an odd issue but mine was a progressive failure. Initially I lost receiving texts, then a few days later receiving calls, days later sending texts and shortly thereafter calling out. I never lost data and always had signal when I was trying to use it and I initially thought it was the tower I was near. I came home that summer from school (~150mi away) and instantly knew it wasn't the tower. So if it is the GV thing it may get worse for you.
I'm the only person who seems to have had this particular problem before that I'm aware of and at the time no one could tell me what was going on. So if anything this may be a "check it off the list" just to make sure it isn't your problem as well.
---------- Post added at 12:18 AM ---------- Previous post was at 12:05 AM ----------
painkillaz said:
Were you not able to call at all anywhere? Because the Only time this happens for me is when I'm in my neighborhood/house Even though I still have the 3g symbol up and 4 out of 5 bars. And this started 3 days ago now, and I have had google voice integrated since before I had the evo 4g lte.
Click to expand...
Click to collapse
How long have you had the GV integration? My particular issue wasn't immediately after the attempt but ~3-5 days after it. It may be worth a shot though to see if it solves it.
Crowordove said:
Well it's an odd issue but mine was a progressive failure. Initially I lost receiving texts, then a few days later receiving calls, days later sending texts and shortly thereafter calling out. I never lost data and always had signal when I was trying to use it and I initially thought it was the tower I was near. I came home that summer from school (~150mi away) and instantly knew it wasn't the tower. So if it is the GV thing it may get worse for you.
I'm the only person who seems to have had this particular problem before that I'm aware of and at the time no one could tell me what was going on. So if anything this may be a "check it off the list" just to make sure it isn't your problem as well.
---------- Post added at 12:18 AM ---------- Previous post was at 12:05 AM ----------
How long have you had the GV integration? My particular issue wasn't immediately after the attempt but ~3-5 days after it. It may be worth a shot though to see if it solves it.
Click to expand...
Click to collapse
Thanks, yea I'll give it a try...and I've had it probably for at least a year...I'm not a 100% sure but I feel as if I activated it for the first time when I had my Evo 4g.
Related
Anyone been successful using their Airave with their Evo 3d?
I am successful it but requires (1) toggling roaming mode to Sprint only, (2) hard reset (remove battery) and (3) update PRL---EVERY TIME I want to get on Airave....worse, if I leave the Airave coverage, my data keeps working, but I can't make or receive phone calls--have to do ANOTHER Hard reset + PRL update. Since I have my 3VO in an Otterbox Defender case, it really makes the entire situation NOT WORTH IT...(Already been on tech support for 4+ hours on this issue...)
Oh and my wife's Samsung Restore won't even connect at ALL lol....
So has anyone been able to seamlessly enter/exit their airave coverage on the 3VO without any hassles?
Thanks in advance!
panamaniac said:
Anyone been successful using their Airave with their Evo 3d?
I am successful it but requires (1) toggling roaming mode to Sprint only, (2) hard reset (remove battery) and (3) update PRL---EVERY TIME I want to get on Airave....worse, if I leave the Airave coverage, my data keeps working, but I can't make or receive phone calls--have to do ANOTHER Hard reset + PRL update. Since I have my 3VO in an Otterbox Defender case, it really makes the entire situation NOT WORTH IT...(Already been on tech support for 4+ hours on this issue...)
Oh and my wife's Samsung Restore won't even connect at ALL lol....
So has anyone been able to seamlessly enter/exit their airave coverage on the 3VO without any hassles?
Thanks in advance!
Click to expand...
Click to collapse
As far as I can tell, my Evo 3d switches to/from the Airave just fine. Admittedly, I almost never talk on the phone. I don't know how well it's working.
What model of Airave do you have? I've got one of the originals.
Woah.....dude I'm jealous. Mine is a HubBub C1 600 RT...I'm assuming it's a fairly recent model as I just received it and it looked new...it's labeled "Airvana" as well. Also, you can tell if you're making your call on Airave or not by listening for a few extra tones at the beginning of an outgoing call, or by simply dialing *99 and it'll tell you if you're on the Airave network.
So maybe only the newer models are ****ed up with Android?? Maybe I should call and request an older model...
mine works the same way the evo4g did; if you start a call on the airrave, and leave the house/area, the call will probably drop off; if you start a call outside of airrave coverage, and them come into the house, you do NOT lose any calls..
I have the new airave
OK, so long story short, these units ARE working with Evo 3D/Android 2.3 etc..........
....this is so ****ing annoying. If it works for you all it should work for me. I have no idea why it isn't. I guess I'll just be patient....or maybe I should ask them to send me another unit, hmm....
panamaniac said:
Woah.....dude I'm jealous. Mine is a HubBub C1 600 RT...I'm assuming it's a fairly recent model as I just received it and it looked new...it's labeled "Airvana" as well. Also, you can tell if you're making your call on Airave or not by listening for a few extra tones at the beginning of an outgoing call, or by simply dialing *99 and it'll tell you if you're on the Airave network.
So maybe only the newer models are ****ed up with Android?? Maybe I should call and request an older model...
Click to expand...
Click to collapse
I know I can tell if I am or not, I just don't know if I have used the phone when I was at home or not.
xenx said:
I know I can tell if I am or not, I just don't know if I have used the phone when I was at home or not.
Click to expand...
Click to collapse
Ah gotcha. Well even if it dropped calls as I was leaving or entering the coverage area that would be fine...it's the hard reboot + prl update that's killing me...
I think you have a bad unit...either the phone or the airvana...I am running great with mine, and don't drop calls coming or going. 3G works great (when I'm not using my wifi network) and I am showing full bars for service. I would call sprint and have them resolve this, something needs to be replaced.
Mine works in and out. Just mine though. Everyone else here connects fine. (2 evo 3ds & 3 evos)
Sent From My HTC Evo 3D Using Tapatalk On The Now Network From Sprint!
We just got an airrave this week and it works fine with me Evo 3d no need even to power off.
Mine works fine. But I only have the original one.
Mine is maybe a few years old. Works fine for me, same as evo 4g.
Mine has never been able to acquire the airave when I arrive home. From what I read here that is not normal?
Sent from my PG86100 using Tapatalk
my 3D works fine with the my air rave unit. I never did anything, it just worked as soon as it was activated.
panamaniac said:
OK, so long story short, these units ARE working with Evo 3D/Android 2.3 etc..........
....this is so ****ing annoying. If it works for you all it should work for me. I have no idea why it isn't. I guess I'll just be patient....or maybe I should ask them to send me another unit, hmm....
Click to expand...
Click to collapse
I had one of the first Airvana's when they came out. It wouldn't work with my 3D for some reason. Sprint tech support shipped me a new one and it works perfectly, I don't know if I had a firmware issue or something, but the new one works perfectly.
I've had my airwave by sprint since the samsung instincts came out and never had a problem with it unless the power or cable went out...keep in mind that ONLY cdma phones will work with it,a broadband phone like the renagade 950(worst phone ever made anyway)won't work....maybe your unit is bad,it also has to be activated,it costs $4.95 amonth but well worth it....hope this helps alittle
hope mine isn't a bad apple when it arrives spent like my whole day off last fridayon phone and in corporate store with various sprint agents *****ing cause they gave me a run around about getting it for free as i lost all my reception once i switched from evo4g to the evo 3d in my apartment .You have to be a ***** but they eventually said they would ship me mine... waiting patiently for it to arrive atm
if i at least received my text messages in a timely fashion as i did on my evo and such in apartment i wouldn't care but the evo3d has 3 bars less the the evo4g did meaning no bars inside so i had to ask for one as i wasn't accepting the switch back to evo4g they suggested
and was very surprised they were so hard to work with they usually are my favorite reps to deal with tbh
i had 4 people i had to talk too.. they even gave the corporate rep the run around when in doubt demand a manager after u nicely ask for the employee number that always seems to get it done
spyngamerman said:
hope mine isn't a bad apple when it arrives spent like my whole day off last fridayon phone and in corporate store with various sprint agents *****ing cause they gave me a run around about getting it for free as i lost all my reception once i switched from evo4g to the evo 3d in my apartment .You have to be a ***** but they eventually said they would ship me mine... waiting patiently for it to arrive atm
if i at least received my text messages in a timely fashion as i did on my evo and such in apartment i wouldn't care but the evo3d has 3 bars less the the evo4g did meaning no bars inside so i ahd to ask for one as i wasnt accepting the switch back to evo4g they suggested
side not was very surprised they were so hard to work with they usually are my favorite reps to deal with tbh
i had 4 people i had to talk to they even gave the corporate rep the run around when in doubt demand a manager after u nicely ask for the employee number that alwasy seems to get it done
Click to expand...
Click to collapse
I hope the Airave helps you too--but have you considered that your phone is bad? I don't think I've heard widespread reports of 3D being worse reception than the 4G...
Also, there are a few semi-hacks (using CDMA workshop, QPST, etc) that can help speed up your internet or put you on roaming to better towers----check out the development section
More thoughts
So I just got off the phone with customer support; I was told to reset it one more time and see if that helps; if not, to call back in and they'd send a replacement.
To recap, the issues I've been having are:
1) Evo 3D must have PRL update every time I come home to find the airave
2) Airave only gives 5 bars if I'm 5 feet away. 20 feet away + a wall = 2 bars again!
3) I've never successfully transferred a call either into or out of Airave--if I leave the house the phone cuts off 100% of the time
4) Wife's Samsung Restore has never been able to connect to Airave at all
All these stack up to my thinking it's the unit itself--especially since others have said their unit works fine w/ the Evo.
Questions:
1) Has anyone else reset their unit? Did the lights or anything change, because mine didn't.
2) Has anyone noticed a difference (Either in wifi speed or airave performance) between plugging airave into your wireless router as opposed to directly in your modem (w/ wireless connected to airave)?
Thanks for any help. I'm hoping my discussion here will help others trying to navigate the same bull****.
panamaniac said:
So I just got off the phone with customer support; I was told to reset it one more time and see if that helps; if not, to call back in and they'd send a replacement.
To recap, the issues I've been having are:
1) Evo 3D must have PRL update every time I come home to find the airave
2) Airave only gives 5 bars if I'm 5 feet away. 20 feet away + a wall = 2 bars again!
3) I've never successfully transferred a call either into or out of Airave--if I leave the house the phone cuts off 100% of the time
4) Wife's Samsung Restore has never been able to connect to Airave at all
All these stack up to my thinking it's the unit itself--especially since others have said their unit works fine w/ the Evo.
Questions:
1) Has anyone else reset their unit? Did the lights or anything change, because mine didn't.
2) Has anyone noticed a difference (Either in wifi speed or airave performance) between plugging airave into your wireless router as opposed to directly in your modem (w/ wireless connected to airave)?
Thanks for any help. I'm hoping my discussion here will help others trying to navigate the same bull****.
Click to expand...
Click to collapse
comcast here 50mbps i pay for
Modem>Airave>airport extreme base station> speedtest at 40mbps
Modem>Airport extreme base station>speedest 55mbps
nothign was uplaodign downloading on the network at the time
what they told me to do wasnt needed but added below for reference
Apple Airport Extreme
The airport extreme router does not have a DMZ instead you would set up for default host
1. Go into the Macintosh HD
2. Go to Applications>Utilities and select Airport Utility
3. Select Manual Setup.
4. Go to Advanced>Logs and Statistics>DHCP Clients and verify the IP address for the AIRAVE.
5. Go to Internet>NAT, check the box for ?Enable default host at? and place the IP address of the AIRAVE in that box.
Hit Update and powercycle the base station.
To ensure authorized access to your Sprint Nextel account information, please log on Sprint.com to create a personal PIN and a Security question & answer. Access will be provided to your account only with the PIN or Security question/answer you set up.
it works amazing with evo3d no prl updates needed havent tried transferrign calls into out of airave have no need myself just need my texts and calls at home i dotn call alot but have to be handy if there is any
model airvana 2
can confirm in basement 5-10 ft away from ti where i wanted it 5 bars
main fl (1st fl) i flr between it 2-3 bars 2nd fl 1-2 bars and i did set it for longe range in preferences on the sprint online portal
review amazing i don't need it in my backyard etc i have super fast wifi for data emails etc just needed signal for emergency calls or texts when inside basement(garden apt) so for me 100% win
hope this helps you guys in any decisions your making any questions pm me ;D
Thanks for such a thorough response!!!
Does your Evo 3D have Google Voice?
Mine does, so that texts/voicemails go thru GV; but it's still my Sprint cell # being used.
Has anyone else had this issue with the airave? Whenever I get back into my house I guess my photon doesn't connect to the airave correctly and I get silent calls until I reboot my phone. Anyone else? I didn't have this issue with my 3d.
Airave is kinda old, that could be it.
Sent from my MB855 using Tapatalk
Bigjim1488 said:
Has anyone else had this issue with the airave? Whenever I get back into my house I guess my photon doesn't connect to the airave correctly and I get silent calls until I reboot my phone. Anyone else? I didn't have this issue with my 3d.
Airave is kinda old, that could be it.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
I used to have that problem before the OTA update came out, but it happened regardless of whether I was by my Airave or not. The OTA seems to have solved it though
Bigjim1488 said:
Has anyone else had this issue with the airave? Whenever I get back into my house I guess my photon doesn't connect to the airave correctly and I get silent calls until I reboot my phone. Anyone else? I didn't have this issue with my 3d.
Airave is kinda old, that could be it.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
I was given an Airvana by Sprint a few months ago. I had major issues with the Nexus s 4G and the Airvana. It would work fine for a bit, then it would block all my incoming and out going calls. Sometimes it would miss route them as well. It was only on the Nexus and when I unplugged the Airvana everything would work again. That's actually how I got the Photon. Sprint sent it to me to address the issue. You problems seem more like a well known bug with the phone that was addressed with the OTA.
I don't seem to be having any problems with the Photon and Airave at all. I have one of the older models that's voice only, I wish I had the one that's data as well.
I have the new airave and my photon connects just fine. I also don't have that issue anymore either where my evo would send the same message a million times to the same person...lol...not one blip with the mopho and airave!
Sent from my MoPho using XDA Premium.
I have the newer airave, and the Photon connects just fine. I do have problems with the airave fairly often. Probably once or twice a week I have to reboot the airave because it loses its internet connection, or stops putting calls through. The issue is always the airave, though, not the phone.
I guess I will have to see if sprint will send me a newer one. I have had this one for two years now and I really can't live without it. The reception in my house is terrible and if sprint didn't send me one of these for free I would have dropped my service........no point in having a carrier that you can only use outside your house
My parents have one of the new airraves and my photon connects but all I get is weird alien like sounds sounds like a scrambled code or something it is really weird and annoying if anyone knows of a fix please let me know
Sent from my MB855 using XDA App
Bigjim1488 said:
Has anyone else had this issue with the airave? Whenever I get back into my house I guess my photon doesn't connect to the airave correctly and I get silent calls until I reboot my phone. Anyone else? I didn't have this issue with my 3d.
Airave is kinda old, that could be it.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
I have airave airvana and i get silent calls all the time. Had to unplug airave.
OK Guys here's the issue. I spoke with Airwave support and he had me do a test:
http://voiptest.packet8.net/
Click the Start Test Button. When it's finished the thing you are looking for the most is Jitter Rate( you will have 5 different catagories). If your Jitter Rate is High (mine was 65ms) you WILL NOT be able to maintain a VOIP call thru the Airwave (it has to be no higher than 5ms). The Sprint Rep told me to call my ISP (TWC) and have them Clean and Flush my line, I did, and my Jitter Rate went down to 1.1ms and my Airwave works GREAT. Have your lines Cleaned and Flushed and rerun the test and you WILL see a difference.
So I figured out my problem I forgot I had set my voice codac to 4GV and the air rave doesn't support that. switched it back to evrc-b and all is well.
Sent from my MB855 using XDA App
ghodzilla5150 said:
OK Guys here's the issue. I spoke with Airwave support and he had me do a test:
http://voiptest.packet8.net/
Click the Start Test Button. When it's finished the thing you are looking for the most is Jitter Rate( you will have 5 different catagories). If your Jitter Rate is High (mine was 65ms) you WILL NOT be able to maintain a VOIP call thru the Airwave (it has to be no higher than 5ms). The Sprint Rep told me to call my ISP (TWC) and have them Clean and Flush my line, I did, and my Jitter Rate went down to 1.1ms and my Airwave works GREAT. Have your lines Cleaned and Flushed and rerun the test and you WILL see a difference.
Click to expand...
Click to collapse
I have this same issue - where 50% of my incoming calls never reach me and go straight to voicemail. Other times, I would not be able to call out and other times it would go without doing anything... same goes for incoming.
Spent hours back and forth with sprint tech, with battery pulls, profile updates, power cycling of airvana and phone and reseting airvana and photon - tried switching to "sprint only" / "any cdma" / "automatic" - nothing particularly gave better results.
After the voip test, everything was in range except for the jitter - mine was between 70-300ms and average in between that which you are right about VOIP not being optimal.
I tried explaining this to comcast (my isp) and they had no idea, saving signal, upstream/downstream is good..
*** How or what do you need to do to have them [the isp] "clean / flush" the line? Is there a better technical term to convey to them?
Is this something they do over the phone from their network side? I have a comcast tech coming in, and from what a sprint tech told me - there's a possibility that the cable lines to my apartment may have not been shielded well creating RF/radio frequency interference, which results in high jitter - so it, according to him is a physical issue - not sure.
I have an old samsung voice only airave - and this works perfect without changing anything...
Would love to get the 3g data back on the airvana and have this work.
This is a legit problem. Been dealing with it for about 4 months now. Started out where the everything works great after a power cycle. Then at some point the Nexus S 4G I had would stop working with the Airvana (the new Airave). All my calls in and out were blocked and other times my calls were incorrectly routed.
I was really weird because at times the Airvana would completely kill the radio on the Nexus. I would just have the signal bars with the little x over top. Other times I would roam on Verizon and no one was able to force me back to the Sprint Network.
I actually lost a some business due to my phone not receiving the calls.
However, as soon as I unplugged the Airvan everything went right back to normal.
My wife's Epic worked just fine as did the Hero, Evo and Evo 3D. Thats actually how I got the photon for free. I had just bought the Nexus outright and was not able to return it. My problems were so well documented that a manager called me one day and offered me an Evo 3D as a way of addressing the problem.
After 2 bad Evo 3D's they sent me the Photon. Everything worked well until last weekend. I had to kill the Airvana once again. My calls were getting blocked.
Apparently what has happened is that Sprint pushed an update to the Airvana and some customers will need to have the device reset on Sprints end. I tried resting it on my end and it's a no go. I just have had to much on my plate to call them again and deal with the scripted support.
Honestly, the radio in the Photon is way better then either of the Samsungs and even the Evo 3D. So it hasn't been a huge rush.
Hope this helps. Also thanks for writing this because I thought I was going crazy as Sprint claims to have never seen these problems before.
I even had a Sprint rep tell me he was going to "boost" the signal to my phone so I got better reception in my area.
It's definitely as I agree an airvana issue - as yourself - as soon as I turn off the airvana... everything works fine... or of out of the airvana network.
What was worse is that the trroubleshooting timing - when calling/testing with tech, it works... best was that they thought everything was great when they called to test incoming, A few minutes to wrap up, I asked if they could dial it once more... straight to voicemail I really wish it did get corrected
The 1st gen samsung hasn't given me any problems thus far which makes me wonder what the issue really is... I was given a replacement 2nd gen airvana because we thought the other airvana was going bad or malfunctioned somehow.
The airvana apparently has an "access menu" which I haven't looked at : the ip they gave me : 192.168.17.2 username : admin / password : admin (or blank). They said there weren't many things to change (I can't confirm this) from there ... i,e time zone/date
This ISP clean/flush looks interesting, but I don't know what that entails or how to convey the message to them to do it.
I lost a lot of calls which should have went through - I know that feeling. It's quite a bit of time to reconvey the issues over and over going through the same steps over and over (regardless of previous call log notes) - just hoping, that this time it will work....
Is it maybe a high jitter issue??
If your Jitter Rate is too high, it will NOT keep a constant VOIP call (that's what we are using with the Airwave, VOIP). I just tell TWC to Clean/FLush my line and they know what to do. You can also tell them to Reset your Modem. This all happens on Their end. The can Reset your Modem over their line.
same Issue
I had the same issue, i upgraded from the epic to the motorola photon, when i got home all my calls were blocked and i had no air rave coverage.*99 didnt go through. I went through the settings and did a manuel update to the latest motorola software to address the silent call issue. Then i logged into my sprint account online, and reconfigured the settings to my air rave(its the new air rave airvanna) After i restricted my airvanna air rave to only my cell phone number and my wifes, i turned off my phone and turned it on, and all my problems were solved. If anyone needs help finding the settings for your air rave, let me know, it took me some time to find it, i could help you locate it. It appears we all have indifferent issues with this phone. My problems been fixed since the 23rd of august. Still no issues today.
Right thanks - I had them "reset" and send a "refresh" signal to my modem - but that didn't do anything to the jitter unfortunately... still in the ~70ms range jitter. Is that what you mean then by "clean / flush" ?
Regarding the mention of restricting the your phone number on the website, yes this was a bit tricky to get to - I initially did use this, but removed my #.
I think my apartment complex has so many airvanas around because wherever I walk around to the outside, I am at times connected when I know it shouldn't...
Apparently - if anyone else comes to your residence that has a sprint connection, their sprint phones don't work - the old airave samsung was able to add multiple phone numbers in that situation. I forgot how long it took for the sprint network to accept the guests' phone #'s - but how much can we ask for?
I am not sure if you could add more "sprint" lines to the account if guests arrived with sprint phones to have it work...
Just got my Airave last night the thing is just disgusting! I love ti and couldn't ask for better. Got my own tower in my house. Still connected down the street too. Frickin sweet. No silent calls here, will respond with more use too.
-DJ
I don't know if anyone else is having this issue, but it appears I am not receiving some calls and/or receiving text late or not at all. I wondering if setting the Roam setting to "Sprint Only" or "Automatic" makes a difference. This seems to be an off and on issue. Also it is starting to get on my nerves when I get text VMs atleast 3 hours after the call was made to me (keep in mind my phone never rang during those calls).
Anybody have any solutions, besides throwing this cool "buggy ass" phone against the wall?
This is a nice phone but it definitely has some bugs to be worked out. Or is all the problems related to Sprint's F'd up signals? My wife has the EVO3D and has none of these issues... wtf.
WUESTSIDER X!
Sent from my EVOLTE using xda premium
I am also having the exact same problem. I have tried playing with all the mobile settings and updating prl without success. This issue is intermitent. Also, I am periodically getting the unable to detect time/timezone message.
I am about to call Sprint, but was hoping to find a solution here. Please let me know what you find out.
wuestsider said:
I don't know if anyone else is having this issue, but it appears I am not receiving some calls and/or receiving text late or not at all. I wondering if setting the Roam setting to "Sprint Only" or "Automatic" makes a difference. This seems to be an off and on issue. Also it is starting to get on my nerves when I get text VMs atleast 3 hours after the call was made to me (keep in mind my phone never rang during those calls).
Anybody have any solutions, besides throwing this cool "buggy ass" phone against the wall?
This is a nice phone but it definitely has some bugs to be worked out. Or is all the problems related to Sprint's F'd up signals? My wife has the EVO3D and has none of these issues... wtf.
WUESTSIDER X!
Sent from my EVOLTE using xda premium
Click to expand...
Click to collapse
I have the same problem and I called Sprint and they told me they were having issues everywhere they are doing Network Vision upgrades cuz of towers being taken offline for the changes so you may be getting some of that
Sent from my Transformer Prime TF201 using Tapatalk 2
kc8emd said:
I am also having the exact same problem. I have tried playing with all the mobile settings and updating prl without success. This issue is intermitent. Also, I am periodically getting the unable to detect time/timezone message.
I am about to call Sprint, but was hoping to find a solution here. Please let me know what you find out.
Click to expand...
Click to collapse
I have researched the issue and it appears this issue is not uncommon. There is already an established post started for this issue, titled; "Anyone else having reception/signal issues?" Right now it appears one the ways to fix this issue is having Sprint re-provisioning your phone. Some have claimed this has helped.
I am planning on doing this myself sometime today.
But it does seem to be a Sprint conectivity issue and/or an issue with the phones antenna.
So I called Sprint and they had me reactivate, but signal still seemed to be a problem as it still roams. They recommended I take it in and get it replaced. So that is what I am going to do as I am just under the 14 day period.
not receiving calls
are you guys still having the same issue or have a work around?
I'm also not getting calls and when I try to make calls, I receive text messages that was sent in the past. I tried to contact customer support but all they've done was have me update profile and restart the phone. This is getting ridiculous specially missing some important calls.
Complain and get a free Airave. Then you'll have perfect call quality and 5 bars everywhere in your house. Done.
Sent from my EVO using XDA
I have been missing lots of calls the lastbfew days, and even wasnable to replicate the issue at my house. If my wife's phone calls mine, it will ring until voicemail on her end,and I get nothing on mine unless I leave a voicemail. I have steady, if not great signal on both (100ish DB).this is only the case for incoming calls, as I can always call out from home with no problems.
I tried that scenario a coupl dozen times, and got through 4 times.
I found two workarounds so far that seem to work consistently. (Both from other threads, can't take credit for finding them, but I did test them extensively. )
1. If I am on another call, I will get the incoming call everytime. I just dial voicemail and have someone call me to test. Without fail, the call center through.
2. Turning GPS and all location services on under settings -location. Strangely enough,all of my dozen test calls have gone through after turning GPS location on. Turning it off brought the usual 20% call success rate back.
Odd to say the least...
PsiPhiDan said:
Complain and get a free Airave. Then you'll have perfect call quality and 5 bars everywhere in your house. Done.
Sent from my EVO using XDA
Click to expand...
Click to collapse
It isn't a signal issue, the phones just don't ring. I have this issue and have full bars when attempted calls do not come into the EVO LTE. I can make calls out fine, just no received calls. Also to make this a more peculiar issue, I go down the highway a couple miles and it works fine.
I have called Sprint and followed a blog on sprint.com http://sprint.r.delivery.net/r/c/r?2.1.GT.2Z2.1hiUnF.DfhoXq..N.1QNCs.4RAa.bW89MQ__DObeFTE0 where others have the same issue, even in the same town. Sprint has followed up with no issue and ticket closed. It is currently open again..
My girlfriend broke up with me over theses missed text messages
and i missed important calls. I called sprint he had me turn off the phone while they refreshed it. Working ok so far i will say this i unrooted my phone and when i woke up i had 48 text messages from the previous week and eight voice mails from three days ago, i wonder if everyone with this problem was rooted as well.
Sent from my EVO using XDA Premium App
I had the same problem with me evo 4g and evo 3d...
I had same problem. Only way to get texts or calls was to call my voice mail. Sprint started a ticket, but since I was within my 14 days I exchanged the phone. Good thing I did cause Sprint closed the ticket on me telling me it was due to system upgrades. But it was not the network at all. As soon as they activated my new phone everything worked perfect. It was the phone the whole time.
Sent from my Transformer TF101 using xda premium
Try This...
I have an epic4g touch and this is the only "Band aid" that has stopped me from smashing my phone!
What I would recommend doing is using Google voice as your voicemail provider. Go to the options menu on the website and have it send you an email when you miss a call.
Google voice will always log the call even if your phone does not ring. For somebody like me who uses this phone for work, it definitely helps. You may miss the call but you will at least know that you missed the call and you can call them back.
It has saved me many times!
Non of my SMS are being delivered today. Anyone else having this issue?
EDIT: Having the same issue with whatsapp messenger as well.
99.5% chance its sprints towers. Update prl and profile, reboot, wait it out. Your surrounding towers are probably being worked on. It's one of Network vision "side effects"
Sent from my EVO using xda premium
Simple PRL and profile update will fix it 99% of the time
Any other ideas? I've done many PRL updates and profile updates, hard boot and soft boot and went from tower at my work to tower at my house about 45 minutes apart, and SMS still not going through.
My phone is working fine in terms of data and phone calls etc, just no SMS. Whatsapp seems to have fixed itself as well.
I've had really annoying texting issues. Probably been my biggest issue with this phone -- I guess it could be due to network vision upgrades, but it started happening right after I purchased my EVO 4G LTE. Mine hang sometimes, then other times it'll send the same message 10 times.
The only issue I've had to where it just won't send at all, even after a restart, is with my airave. I've had it happens a few times -- my texts will hang indefinitely (arrow animation never stops) until I unplug my airave.
I had issues with sms not sending today also. But I'm sure its b/c of them working on the towers LTE.because about 3 times since last Saturday I had LTE for like 5 minutes or so then gone.but sms working again now.
sent from my EVO LTE
It's the network upgrade guys. Coincidence or not, it's the upgrade. Everyone has complained about this and it's always the same explanation.
Do you have to call your voicemail to get your texts?
Sent from my EVO using xda app-developers app
PsiPhiDan said:
It's the network upgrade guys. Coincidence or not, it's the upgrade. Everyone has complained about this and it's always the same explanation.
Do you have to call your voicemail to get your texts?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Oh, okay. Color me convinced.
Funny you post this, mine are not working well this afternoon.
Just curious, are you guys using stock or custom rom?
Stock.
Anyways, I called up sprint and they were able to help me out. At first he said there was a cell site that was being worked the tech did the troubleshooting, asked me to reboot and I am able to send and receive test messages
Out of the blue I'm now unable to send text messages. :crying:
I can still receive them, just can't send them. Hopefully it's something on Sprint's end and it works itself out in a days time.
I found out I was unable to make calls as well. I restored a few previous Viper 4G nandroid backups to see if that would help, but no luck. I finally restored all the way to the stock rom w/ root and I was able to make calls again. A fresh wipe and install (not restore) of Viper 4G and I was back to not being able to make calls. Guess it's stock rom for me for awhile. Classes started today and I won't have as much time to play.
And stock pooped out too. Must've been a fluke earlier.
Things now work again. The fault is all on Sprint's end. Stupid Sprint...
I hope there's a silver lining and it means I'm getting LTE sooner than later!
Its network congestion most likely, in my experience sudden roaming or network dropping in and out in a well covered area means repair or upgrades which now that I think about it could affect text messages as well
Hey guys, Punk9 again.
I live in the UCF area (Orlando FL) and I have LTE signal here. I have around 2-3 bars of service most of the time as well.
Lately I have been getting texts late, and not even receiving phone calls. For example, my gf sent me 6 texts within about an hour, I got all six at once, each with the time stamp of the time she sent them, but I got them all at the same time. She also called twice and nothing rang on my end, but it rang for 30 seconds and went to my voice mail on her end.
Is this a known issue or? I'm running ViperROM for Sprint one max. It was happening when I was stock as well (which is why i didn't post in the ROM thread)
Any ideas?
-Andrew.
yeah, call sprint and tell them about your signal issue..
Did yoi flash with cwm or twrp? I havr heard there are issues with signal when flashing with cwm.
*I have not personally used cwm on this device
wase4711 said:
yeah, call sprint and tell them about your signal issue..
Click to expand...
Click to collapse
I'm running twrp. I'll call Sprint then thanks guys!!
Sent from my HTC0P3P7 using xda app-developers app
they've actually been very good lately, in the Chicago land area, about responding the these kinds of issues..We have the new Spark network here, and its been really good so far, but there are some spots that need to be tweaked. When you call them and report it, they appear to spend time to send a detailed report out to their field network folks, and, so far, the 3 times that I reported areas with dead zones, when i returned, the problem appeared to be fixed.
hope it works that way for you..
I'm at work in Maspeth Queens New York and I have the Spark 4G LTE with 1 Bar most of the time which eats up my battery. Then the rest of the time, My phone has anywhere from 4 to 6 Bars on 3G.
At My House I have No 4G Anything! And sometimes, a Crappy 3G signal. I have a Sprint Airaive because of that. And the Bad thing that SUCKS, is that I'm less than 2.Miles from the Tower with a Clear Line of Sight and I Roam about half of the time if I unplug the Airaive.
Punk9 said:
Hey guys, Punk9 again.
I live in the UCF area (Orlando FL) and I have LTE signal here. I have around 2-3 bars of service most of the time as well.
Lately I have been getting texts late, and not even receiving phone calls. For example, my gf sent me 6 texts within about an hour, I got all six at once, each with the time stamp of the time she sent them, but I got them all at the same time. She also called twice and nothing rang on my end, but it rang for 30 seconds and went to my voice mail on her end.
Is this a known issue or? I'm running ViperROM for Sprint one max. It was happening when I was stock as well (which is why i didn't post in the ROM thread)
Any ideas?
-Andrew.
Click to expand...
Click to collapse
This sounds like a common CSFB issue. All new triband phones, or Spark devices use a new technology called Circuit Switch Fall Back, which allows the phone to use less battery because it has one radio for everything. When the device connects to LTE, it cuts off connection the 3G network, and essentially loses the ability to send/receive texts/calls. CSFB is the answer to this, however, it is not wholly deployed. CSFB tells the phone via LTE to switch back to 3G to receive phone calls and texts, as well as to send them. Since the technology is not as widely deployed as the amount of users of the new devices, theses issues happen.
A common way to fix this is to stay on 3G only mode, which is a burden. Otherwise hope the Sprint tech is smart enough to know its a Spark phone related issue, and knows how to send a tech out to your area to fix it. Last resort is to wait it out.
Calling Sprint may or may not do anything. I have been experiencing these problems since day one in New York City at my home, and every call to Sprint was answered with a saying that it is an issue with your phone.