I will simply tell u what is my problem .
Since i don't have a WIFI connection and i only have a wired connection , I downloaded a program called : Virtual Router Manager which turns my laptop into a hotspot .
My sister's blackberry curve 8520 detected this network and it is working fine.
But when i use my galaxy mini it detects the network and connects to it with 4 bars signal but when i try to load any page there is no connection ( No Traffic ) .
*It actually works for 10 sec then there is no traffic and when i disable it and re-enable it works for another 10 secs then no traffic again .
I hope u guys can find a solution for my problem soon and thanks in advance
Your device probably has issues with the network (ad-hoc). Try using Connectify, and if the problem persists, then we'll take it from there.
Didn't Work
Theonew said:
Your device probably has issues with the network (ad-hoc). Try using Connectify, and if the problem persists, then we'll take it from there.
Click to expand...
Click to collapse
Still no luck . Stuck with the same problem
I got images but i can't post them since i am a new member
silverdrag2 said:
Still no luck . Stuck with the same problem
I got images but i can't post them since i am a new member
Click to expand...
Click to collapse
That means this method may be for you: http://forum.xda-developers.com/showthread.php?p=26474673.
Theonew said:
That means this method may be for you: http://forum.xda-developers.com/showthread.php?p=26474673.
Click to expand...
Click to collapse
I can't use this method since my phone isn't rooted.
Isn't there any another method ?
Sent from my GT-S5570
silverdrag2 said:
I can't use this method since my phone isn't rooted.
Isn't there any another method ?
Sent from my GT-S5570
Click to expand...
Click to collapse
To make your phone ad-hoc capable, no, you'd have to root it (you need to be able to replace the wpa_supplicant which requires writing to the system partition).
OK thanks for every thing
Sent from my GT-S5570
Related
i had my x10mini wireless not working.i can see all the wireless,tried to connect to my home wireless,not connected.the wireless signal is not shown on the top screen.tried reboot,restore still the same.Using 2.1.1.A.0.6.Pls help.Thks. Sorry for my poor english.Thks in advance.
jingaro said:
i had my x10mini wireless not working.i can see all the wireless,tried to connect to my home wireless,not connected.the wireless signal is not shown on the top screen.tried reboot,restore still the same.Using 2.1.1.A.0.6.Pls help.Thks. Sorry for my poor english.Thks in advance.
Click to expand...
Click to collapse
1. Try with other wifi places.
2. Try reflash again.
3. Do you use JIT? Disable it.
hansip87 said:
1. Try with other wifi places.
2. Try reflash again.
3. Do you use JIT? Disable it.
Click to expand...
Click to collapse
Tried with other wireless but still the same,cant connected.i restore many times & reflash but still the same.i never JIT before.i did root & wanna flash but i always failed.So i just leave it.Then I factory data reset.the next i tried connecting my wireless..It did not respond.I was so Frustrated..... Pls anyone help me.thks..
Maybe you should send it to SE?
Sent from my U20i using XDA App
jingaro said:
i had my x10mini wireless not working.i can see all the wireless,tried to connect to my home wireless,not connected.the wireless signal is not shown on the top screen.tried reboot,restore still the same.Using 2.1.1.A.0.6.Pls help.Thks. Sorry for my poor english.Thks in advance.
Click to expand...
Click to collapse
to solve this problem you need to go to your rooter/modem manengement page and disable SSID disolving(or some thing like that)
even if that donsent solve the problem.
change your password security to WAP2 or WEP
PTGamer said:
to solve this problem you need to go to your rooter/modem manengement page and disable SSID disolving(or some thing like that)
even if that donsent solve the problem.
change your password security to WAP2 or WEP
Click to expand...
Click to collapse
Could u pls guide me on what to press.I'm a noob.thks...
Hi everyone. Today i updated new version of Kies 2.0.3.1182_152. I tried several official firmwares, but Kies says 'S/W in your phone is not the official version. Unofficial version cannot be updated... Does anyone know what to do?
Yes, flash the official firmware and hard reset the device
Intratech said:
Yes, flash the official firmware and hard reset the device
Click to expand...
Click to collapse
I have done it several times, on every official firmwares...Not helped...
roymustafa said:
I have done it several times, on every official firmwares...Not helped...
Click to expand...
Click to collapse
maybe you forgot to set the proper country code (csc) in the dialer type *#272*your imei# then choose the country you got the phone in. take note you must use your original country's firmware.
Sent from my GT-I9100 using xda premium
roymustafa said:
I have done it several times, on every official firmwares...Not helped...
Click to expand...
Click to collapse
HARD RESET not factory reset. *2767*3855#
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Intratech said:
HARD RESET not factory reset. *2767*3855#
Click to expand...
Click to collapse
I have always been curious about this. What is the difference of hard reset from factory reset? I always assumed both are the same.
Sent from my SK17i using xda premium
Latest Kies Shows this error
I have Latest Kies Installed ,
Its Shows up error message when i connect my SGS 2.
But works perfectly on My SGS1.
I have 100% stock firmware. checked the settings all are perfect.
I even hard resetted the phone... No use same issue.
please help me
Check the Link
http://imageshack.us/photo/my-images/651/kieserror.jpg
The only help that can be given is the following .
One use an older version if this one has a flaw ,
Two complain to Samsung .
jje
JJEgan said:
The only help that can be given is the following .
One use an older version if this one has a flaw ,
Two complain to Samsung .
jje
Click to expand...
Click to collapse
But I think on Android devices, in most cases fault is not belong to Samsung, but to Google (Android Dev Team)...For example..I still have a wifi problem...Even in Service Center it couldnt be solved..They dont know what is the problem...I thought i am the only one that have wifi problem but not, look at this...http://code.google.com/p/android/issues/detail?id=1386#makechanges...From here is known that most problems is Android faults...
(My Wi-Fi problem is..in this days i have noticed a problem with my Samsung Galaxy S II.
Sometimes I have the gsII connected to my router but internet connection doesn't work.
I'll try to explain better what i mean... I start wifi on my gsII and use internet connection without problem. Then I set the phone in standby mode leaving wifi on. When after a while i want to use internet connection, it doesn't work. The telephone is still connected to my router but i can't use internet on the phone.
The only way to make internet connection work is to disable wifi e then reactivate it.
This is really frustrating....
I've got the telephone from three months but only now I'm noticing this problem because first I used to disable the wifi and activate it only when i need it.)
Intratech said:
HARD RESET not factory reset. *2767*3855#
Click to expand...
Click to collapse
i have done Hard Reset...Still not solved..
lvvine said:
I have Latest Kies Installed ,
Its Shows up error message when i connect my SGS 2.
But works perfectly on My SGS1.
I have 100% stock firmware. checked the settings all are perfect.
I even hard resetted the phone... No use same issue.
please help me
Check the Link
http://imageshack.us/photo/my-images/651/kieserror.jpg
Click to expand...
Click to collapse
Unchek the USB Debug ( Menu->Settings->Applications->Development ) mode and try again. This will solve the Kies error message.
solve my problem
prinzhernan said:
maybe you forgot to set the proper country code (csc) in the dialer type *#272*your imei# then choose the country you got the phone in. take note you must use your original country's firmware.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for advice. I have the problem until I have change the sale code. Now everything seems to be ok. Thank you very much!!!
Panayiotis said:
Thanks for advice. I have the problem until I have change the sale code. Now everything seems to be ok. Thank you very much!!!
Click to expand...
Click to collapse
You're welcome. Glad to help. Enjoy!
Sent from my GT-I9100 using xda premium
Hey guys! I am having this same issue. I got an update from Vodafone Spain and it gave me many errors, (2.3.6) and battery life was not as good. So I downloaded the original firmware, and now KIES doesn't recognize it. So I tried this method and it only says "ATL" on it, and then... Oh shucks! Here's a screen shot.
I downloaded it from sammobile.com and it says
I9100BUKE5 ## EXT4.PIT 2.3.3 2011 May DOWNLOAD
CSC is blank. But that's the version I had, and also:
http://hotfile.com/dl/120766439/6afee0e/I9100_VDF_I9100BUKE5.rar.html
That's my carrier. But the CSC on my phone says ATL. I don't know what this means, but now KIES won't recognize its version anymore .... Any ideas?
Update: Vodafone Spain is ATL! OK... So it reads it fine, but .... why can't KIES recognize the firmware?
Thanks
hi guys, i bought a Galaxy S II GT-I9100G two weeks back and everything was running good and i updated the firmware through the official site to DZKJ2 (Android ver. 2.3.6) and now when i connect my phone to my pc via usb it shows unknown device and i dont see the usb mount option on the drop down notication menu .. and now i am in total mess .. can only transfer files via wifi .. someone help me out .. havnt rooted my phone as yet .. but first this needs to be fixed in order to root the phone i guess ... H E L P
jackson.james said:
hi guys, i bought a Galaxy S II GT-I9100G two weeks back and everything was running good and i updated the firmware through the official site to DZKJ2 (Android ver. 2.3.6) and now when i connect my phone to my pc via usb it shows unknown device and i dont see the usb mount option on the drop down notication menu .. and now i am in total mess .. can only transfer files via wifi .. someone help me out .. havnt rooted my phone as yet .. but first this needs to be fixed in order to root the phone i guess ... H E L P
Click to expand...
Click to collapse
the DZKJ2 has quite some bugs in it.. and as for now, i suggest u to use odin and reflash the stock rom DZKJ1.. use this if u dun have the stock rom http://www.multiupload.com/6L8BALT56F
thanks for the quick reply CustomKill
i have not rooted my phone as yet . So will Odin work if the phone is not rooted ?
And besides the computer is not detecting the device even. So will it work ?
jackson.james said:
i have not rooted my phone as yet . So will Odin work if the phone is not rooted ?
And besides the computer is not detecting the device even. So will it work ?
Click to expand...
Click to collapse
doesn't have to root your phone to use odin.. and put your phone in download mode then odin can detect the device
jackson.james said:
hi guys, i bought a Galaxy S II GT-I9100G two weeks back and everything was running good and i updated the firmware through the official site to DZKJ2 (Android ver. 2.3.6) and now when i connect my phone to my pc via usb it shows unknown device and i dont see the usb mount option on the drop down notication menu .. and now i am in total mess .. can only transfer files via wifi .. someone help me out .. havnt rooted my phone as yet .. but first this needs to be fixed in order to root the phone i guess ... H E L P
Click to expand...
Click to collapse
Reinstall your usb drivers on your computer (Kies) there not working properly, but first try to use another usb hub on your computer than the one u are using usualy
gee2012 said:
Reinstall your usb drivers on your computer (Kies) there not working properly
Click to expand...
Click to collapse
sorry but to tell u.. thats the firmware problem.. not the usb driver.. even u tried to install the driver again it will show as failed to install.. thats a personal experience for me..
CustomKill said:
sorry but to tell u.. thats the firmware problem.. not the usb driver.. even u tried to install the driver again it will show as failed to install.. thats a personal experience for me..
Click to expand...
Click to collapse
I don`t think firmware prevents a usb connection between pc and phone. It might not see the phone but there is a connection
gee2012 said:
I don`t think firmware prevents a usb connection between pc and phone. It might not see the phone but there is a connection
Click to expand...
Click to collapse
previously i had the same problem just after i update the firmware.. and i tried most of the solution include the one u said.. nothing works.. but then somehow, i found the solution to solve by flashing the previous version firmware
Oke, could be off course. But then how do you ever get an update?
gee2012 said:
Oke, could be off course. But then how do you ever get an update?
Click to expand...
Click to collapse
when i'm still at stock rom.. i used the manually search for update and it helps me to update my phone from 2.3.5 to 2.3.6 and thats where all the problem starts
usb
man i had the same problem with my sgs2 .. i cracked my head for a while, but i found some solution that worked for me.
go to Settings---->Applications---->Development----->Uncheck the Enable Debugging mode ...
hope it helps =]
I am sure there nothin wrong with the usb drive in my pc because i tried all the slots and i even went to my friends house to check , but still the same issue .. So it's the firmware update that's causing the error. And i wana know whether if i use odin and flash my phone back to 2.3.5 will i lose all the apps that r installed on the phone ?
Sent from my GT-I9100G using XDA App
jackson.james said:
I am sure there nothin wrong with the usb drive in my pc because i tried all the slots and i even went to my friends house to check , but still the same issue .. So it's the firmware update that's causing the error. And i wana know whether if i use odin and flash my phone back to 2.3.5 will i lose all the apps that r installed on the phone ?
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
nope.. u wont lose any apps
Thanks for the reply Customkill
Will it be a good idea to root the phone at the same time along with changing the firmware as you said ?
Sent from my GT-I9100G using XDA App
jackson.james said:
Thanks for the reply Customkill
Will it be a good idea to root the phone at the same time along with changing the firmware as you said ?
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
there's a way to root i9100G.. since normal i9100 ways doesn't works.. u can try to flash this kernel http://www.mediafire.com/?vudqw1fd711uov8.. by the same way u flash the stock rom.. and u get a CWM and root
The usb connectivity issue got fixed automatically .. Don't know how but today when i connected to the computer it automatically installed the drivers and i was good to go ..
Now that it got fixed i need to root my phone . And i only have experience rooting my earlier phone Xperia X8, could you tell me the steps i should follow to root and the files needed as well as where to get them . And as u see my phone is GT-I9100G so the files on the ordinary S2 won't work on mine .. And i am scared that i might brick my phone lol . So help me out here .. Ty
Sent from my GT-I9100G using XDA App
jackson.james said:
The usb connectivity issue got fixed automatically .. Don't know how but today when i connected to the computer it automatically installed the drivers and i was good to go ..
Now that it got fixed i need to root my phone . And i only have experience rooting my earlier phone Xperia X8, could you tell me the steps i should follow to root and the files needed as well as where to get them . And as u see my phone is GT-I9100G so the files on the ordinary S2 won't work on mine .. And i am scared that i might brick my phone lol . So help me out here .. Ty
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
actually there isn't really any proper root for i9100G.. but the post before is the easiest method already.. just flash the kernel using odin by ticking the PDA slot and put this GKernel http://www.mediafire.com/?vudqw1fd711uov8... after that your phone should boot itself.. after booting your phone will have CWM and superuser by that means its rooted..
I have a similar problem like this..... i am unable to connect my i9100g to pc via usb after i updated my software to XWLC2..... is there a way to correct this? my mobile is not rooted and i updated it through the Update Software feature in the mobile....
I'm not sure my s3 bricked or not, yesterday i try to flash a new firmware MC3. But it was fail after, i was trying to flash older firmwares but it didn't work either. I can't turn on s3, it's also said "Please connect with KIES for recovery", i plugged it to computer but it doesn't seem connect with my computer. Please help, thanks so much.
hoangtung619 said:
I'm not sure my s3 bricked or not, yesterday i try to flash a new firmware MC3. But it was fail after, i was trying to flash older firmwares but it didn't work either. I can't turn on s3, it's also said "Please connect with KIES for recovery", i plugged it to computer but it doesn't seem connect with my computer. Please help, thanks so much.
Click to expand...
Click to collapse
Make sure you put your phone in download mode, and also Samsung USB Drivers installed on your PC. Try other USB cable if it did'nt work. Redownload the firmware, maybe it is a corrupted file
If you can boot into recovery then format data and cache, that might make the phone bootable again. If that doesn't help then boot into download mode as above and flash the correct stock rom via odin.
If it won't boot into download then you have a hard brick, service centre repair required.
fanbogo said:
Does anyone know how to run triangle away on SGS 3 without downloading additional data? The point is that I bricked my device, somehow lost IMEI and put phone into factory mode, wifi doesn't work, the same goes for mobile networking. I'd like to give it back to where I bought it from but in Odin mode you can see that the custom binary download is yes (10 counts). In other words I'd appreciate it if you told me what to do to return the device and get it fixed or replaced. Thank you.
Click to expand...
Click to collapse
Have you tried without downloading or used some other wifi .
Please stop hijacking other threads all the time .
jje
JJEgan said:
Have you tried without downloading or used some other wifi .
Please stop hijacking other threads all the time .
jje
Click to expand...
Click to collapse
sorry mate, I'm desperate. It can't be done without mobile networking or wi-fi because it claims it needs some additional data.
fanbogo said:
sorry mate, I'm desperate. It can't be done without mobile networking or wi-fi because it claims it needs some additional data.
Click to expand...
Click to collapse
Do not spam the forums, I have deleted your posts. Did it ever cross your mind that the best way to get an answer would be to create your own thread in the Q&A forum and give as much detail in there as you can? If it didn't cross your mind then I would suggest doing it.
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
edjudas said:
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
Click to expand...
Click to collapse
CLEAN Flash fastboot rom in EDL mode.
Black_Stark said:
CLEAN Flash fastboot rom in EDL mode.
Click to expand...
Click to collapse
Hello, thanks for the reply man, do you know some guide on how to do it?
edjudas said:
Hello, thanks for the reply man, do you know some guide on how to do it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...oot-to-edl-mode-fastboot-test-t3398718/page23
---------- Post added at 05:26 AM ---------- Previous post was at 04:29 AM ----------
edjudas said:
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
Click to expand...
Click to collapse
After flashing in edl mode if still asking for password.
Then login using ur dads mi account on computer
Go to devices
and delete redmi note 3 device entry in devices option if present.
---------- Post added at 05:27 AM ---------- Previous post was at 05:26 AM ----------
edjudas said:
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
Click to expand...
Click to collapse
After flashing in edl mode if still asking for password.
Then login using your Dads mi account on computer
Go to my devices option
and delete redmi note 3 devic if present.
Black_Stark said:
After flashing in edl mode if still asking for password.
Then login using your Dads mi account on computer
Go to my devices option
and delete redmi note 3 devic if present.
Click to expand...
Click to collapse
This wouldn't work as phone has no data connection to verify this.
n0b0dy666 said:
This wouldn't work as phone has no data connection to verify this.
Click to expand...
Click to collapse
It will only work if u put dads sim in ur phone and reset password.
I managed to flash it and unlock it, the only problem is that the wifi is still not working, displayed mac adress is 02.00.00.00.00, tried multiple fix but none worked...is it hardware failure not software?
edjudas said:
I managed to flash it and unlock it, the only problem is that the wifi is still not working, displayed mac adress is 02.00.00.00.00, tried multiple fix but none worked...is it hardware failure not software?
Click to expand...
Click to collapse
wifi and bluetooth both not working??
Black_Stark said:
wifi and bluetooth both not working??
Click to expand...
Click to collapse
yes, it says something like ''impossible to get ID device, bluetooth needs a correct ID or IMEI bla bla bla''
It's not like wifi, bluetooth toggle works and it stays blue when I use it; the wifi one becomes blue (on) for a second then turns grey (off)
edjudas said:
yes, it says something like ''impossible to get ID device, bluetooth needs a correct ID or IMEI bla bla bla''
It's not like wifi, bluetooth toggle works and it stays blue when I use it; the wifi one becomes blue (on) for a second then turns grey (off)
Click to expand...
Click to collapse
Can u see Imei number ?? Is it showing ?
edjudas said:
yes, it says something like ''impossible to get ID device, bluetooth needs a correct ID or IMEI bla bla bla''
It's not like wifi, bluetooth toggle works and it stays blue when I use it; the wifi one becomes blue (on) for a second then turns grey (off)
Click to expand...
Click to collapse
if IMEI number is not showing you might have to restore using QCN tool