Post the following
Case: Brand Style Picture
Screen Protectors: If Any
Headphones: Brand Style Picture
External Mods: If Any
Case: T-Mobile D30 Black Impact Case
Screen Protector: T-Mobile Anti-Smudge, which is surprisingly clear and clean.
Headphones: I forgot what the name was but it's the recommended one in the earphones thread with the buttons and mic plus built in fm antennae, is awesome for 30 dollars.
No external mods for me.
Nice just got a teal one for $13
Sent from my HTC Amaze
Related
Have anyone ordered the ikonic edge SuperSlim case for the THD??, it's originaly desgined for the iphone 3G, but as it's 100% genuine leather it can be stretched a little bit to fit the THD.
Moreover, I've contacted them to ask if it fits the THD. And here is the reply:
-----------Quote
Yes the dimensions are almost identical.
In fact I have had a few customers who has bought one
for the HTC. There is no reason why it shouldn't
be a very good fit. I don't have the inner dimensions
but going by the size it will fit the HTC.
iphone 3G Dimensions:
(115.5 by 62.1 by 12.3 mm)
# Weight: 4.7 ounces (133 grams)
HTC Touch HD Specs:
* Dimensions: 115 mm x 63 mm x 12 mm
* Weight: 146 gms
Regards
Dominic
______________________________
Tel (64) (09) 4808386
Mobile (64) 021 50 8686
www.iconic.co.nz
New Zealand's Online Design Shop
-----------UnQuote
But, still am not sure if it will perfectly fit and didn't decide to order one yet!
The leather and design is nice. wondering anyone use to before i get one.
Very nice, makes me proud to be a Kiwi. Was going to order one and in NZ$ and get it sent but works out I would only save a few £ due to the terrible sterling rate
provide information about the fitting of the phone once you get hold of this leather pouch. the temtation of this case is raising from me.
Anyone bought this case yet? please advise if the fitting is not too tight for HD.
Well, since no one reponded yet here is a reply I got from Ikonic Edge regarding this matter:
Hi
We have sold a number of these to HTC
Touch owners as the dimensions are almost
the same. So it fits just as well with the HTC.
Regards
Dominic
______________________________
Tel: (64) (09) 4808386
Fax: (64) (09) 4181142
www.ikonicedge.com
New Zealand Handmade Leather Pouches
Click to expand...
Click to collapse
I am planning on ordering one when I get my HD
Browsing through the site, these cases seem very good quality. One question that occurs to me though; if they're made for the fruitphone, the 'speaker opening' that they tout in their description won't be in the correct place for our HDs.
I have ordered an ikonic edge Super-Slim Card pouch (iPhone 3G) tan colour for my Blackstone.
I will post some pics and short review as soon as I receive it
Hi, any pics yet?
No not yet, didn't receive it yet, hopefully tomorrow!
I'll let u know
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
Well, do the Blackstone designated cases/pouches have an opening on the back
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
There's nothing to worry about as far as the ringing tone goes. I have several different leather pouches designed for Iphone that work perfectly with HD. And since Touch HD actually has the loudest speakerphone out of the whole touch-screen bunch, I can confirm that keeping it inside leather pouch does not affect ringing volume.
I actually noticed that the default HTC soft pouch muffles the sound more then the leather ones.
As for the dimensions, most Iphone accessories will fit Touch HD as well. Only possible problem is that HD is slightly fatter at the bottom, so some stretching may be necessary.
No pics yet???
yeah any updates on this case? interested in getting one but wanted to know from someone who already has one.
It is here....
Ok guys, I got the pouch a couple of days ago
It is just awesome
I'll be posting a review with pics later this evening... stay tuned
The review is up...
Check out the review with pics for this pouch here:
http://forum.xda-developers.com/showthread.php?p=4034898#post4034898
My beautiful phone became ugly
The invisibleSHIELD for the original Tp2 doesn't fit the device simply because it's much and much taller, obeviously desined for another device.
I ordered one for my original (unbranded) TP2 and when i tried to instal the back shield that was a big screw when i discovered it's too taller to fit my device (how can it happen ?) the upper part toward the power button was ok but the lower part toward the mini usb does not fit it at all, i had to use a scissors to cut the extra material with a very ugly and uncomfotrtable result
I had to make a hole for the hand strap near the mini usb as the original one in the shield was suited on the mini usb and i cut it with the extra part.
I think the invisibleSHIELD for TP2 is good but for any thing else other than the TP2 itself.
Sounds like you just got the wrong on or something..plus I wold not do a whole body one, just the screen!
I am sure
The backage i recieved has a white sticker on it that says :
HTCTOUPRO2FB
HTC Touch Pro 2
Full Body
I got the Zagg all around body shield installed at the local mall and it fits just fine
you are speaking about the original TP2 or the branded one?
I'll try to post some photos to domestrate the problem.
I wouldn't go with any other brand...
meromar said:
you are speaking about the original TP2 or the branded one?
I'll try to post some photos to domestrate the problem.
Click to expand...
Click to collapse
I had an one on the G1 which my wife has now. I have it on my Hero and TP2, just the screen cover not the whole body one. I have a black gel case for the TP2. Mine is T-Mobile branded and I wouldn't put any other protector on my phones.
To be honest though it took me 2 tries on the g1 to get it perfect and 1 on the rest of the phones. It is frustrating but if you scrape and apply at the same time very slowly (kinda like window tint) it comes out great.
One more thing I got the universal as the shop I had did not have one for the TP2, they said it was to new. It was rather easy you just line it up to a grid and cut from there.
Product Link: http://www.amazon.com/Otterbox-Defender-Tune-Belt-Thunderbolt/dp/B0056AN7SQ
Here’s a quick run down with photos (arm band).
I was hoping this would fit the EVO LTE with a case and fortunately it does. I initially was just going to use it with my Dizitronic TPU case, but thanks to another xda member, I also ended up ordering the Ventev Case located here: - http://www.amazon.com/Ventev-Edge-Holster-Combo-White/dp/B00846W5XC
For those of you with other cases, you can measure to see how your case compares to the Ventev. The dimensions of the EVO LTE with the Ventev case on it are 141(L) x 76(W) x 14(H) mm and it just fits snugly in the Tune Belt Armband.
The photos pretty much tell the whole story. You can see there are access holes at the bottom of the band that allows you to feed headphones through if you need to. In addition the blue Tune Belt tab is actually a Velcro tab as well that can be used to secure your extra head phone wires. I’ll be using Bluetooth the whole time so I don’t have to worry about it.
You’ll notice the top does not actually “close” or seal. This isn’t an issue if you have any type of case on your EVO as the case grips the inside enough to secure the phone inside. If your EVO is naked, I might be a little concerned with it being able to slide out of the case under certain circumstances.
I’ve included photos with the blue silicone case so you can see it better. I also got a photo in there with the Ventev (white) case. The silicone case does catch the inside of the band a little more due to the grippy nature, but nothing troublesome.
Some of the Amazon reviews mentioned the Velcro getting weak over time and I can see that happening as the Velcro isn’t the “heavier” Velcro that I’ve seen used on other items. Also, I have about 16 inch biceps right now and the band just fits about right. I’m working out now, so I went ahead and ordered the band extender since it’s only about a $1.50 more.
Here's the link to the full resolution gallery of photos: http://imgur.com/a/56D9X#0
Let me know if you have any questions!
Nice write up, I've been holding off for too long. Should be here Tuesday, running trails is no fun with a monster phone in my hand...
Sent from my EVO using xda premium
lazydazed said:
Nice write up, I've been holding off for too long. Should be here Tuesday, running trails is no fun with a monster phone in my hand...
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks.
Yeah I was too paranoid of something happening without a band or case so I wasn't using it, but now it's great.
I use it with "A HIIT Interval" (High Intensity Interval Training Timer) and it works great. (The timer vibrates the phone as well as an audio beep and I can feel the vibration through the armband)
Decent visibility through the case unless you have a bad angle and there's glare. I should have mentioned, touch screen works fine.
While I haven't had any issues with my Skinomi screen protector and the plastic screen on the armband, they do mention the risk of it sticking.
I've always wished that the One X could have come to Sprint instead of the Evo (blasphemy I know... ). The Sense 4.0 interface looks much better with the black buttons and white edging and back. And personally I think the white Evo looks like crap with the white faceplate on the front with the dark Sense UI. So I found this case on Amazon and now I have the best of both worlds The Android logos inlaid on the back give it a good soft touch feel and all the buttons are easy to get too.
White Androidified Cruzerlite TPU Case
http://www.amazon.com/dp/B0081244BK/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my EVO using Tapatalk 2
rubyknight said:
I've always wished that the One X could have come to Sprint instead of the Evo (blasphemy I know... ). The Sense 4.0 interface looks much better with the black buttons and white edging and back. And personally I think the white Evo looks like crap with the white faceplate on the front with the dark Sense UI. So I found this case on Amazon and now I have the best of both worlds The Android logos inlaid on the back give it a good soft touch feel and all the buttons are easy to get too.
White Androidified Cruzerlite TPU Case
http://www.amazon.com/dp/B0081244BK/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I have this case, and while I love it I only used it for 5 days. It gets stained very easily and nothing that I have found will restore it back to white. Tried manic eraser, alcohol, nail polish remover, bar-keepers friend, bleach.... So if you find something that works, please post it. I ended up breaking down and buying a different one on eBay last night.
Sent from my EVO using Tapatalk 2
I've got a green one, I can at least vouch for the quality. Everything about this case fits perfectly and tight.
The only issue I have is that some of my USB cable ends(Old BB Cables mainly) are a little thick for the cut out and they don't have a satisfying "Click" when you plug them in, this causes them to fall out relativly easily when you move the phone around while its connected.
My stock HTC cable, MonoPrice, and a few Sammy cables I have are perfect though.
Mine is still white after a week.. Not completely pure white but enough to keep me happy
Sent from my EVO using Tapatalk 2
Sprint had a white body glove case at the store. White with a bit of grey thrown on the sides as rubber grip. Not bad looking but makes the phone considerably larger.
I bought the black version of this case just a few minutes ago.
Also there's this other white one in eBay for less than 3 bucks.
I have an Otterbox commuter but..
I bought the black one though since it is just like the one I have for my Motorola Photon and I don't want to break or modify my otterbox just to be able to use the iBolt Car Dock..
These cases are very nice and durable and also the best is that they're cheap.
(It takes 2 weeks to be delivered cause they are sent from china) but shipping is free!
check it out!
http://www.ebay.com/itm/HTC-EVO-4G-...196907?pt=PDA_Accessories&hash=item2a20663a2b
In case any of you guys want the black one here is the link:
http://www.ebay.com/itm/HTC-EVO-4G-...969914?pt=PDA_Accessories&hash=item27c95beefa
I just bought the white one, too, two days ago. It shipped today!
Sent from my EVO using Tapatalk 2
MOD EDIT: LINK REMOVED
Per the forum rules:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
THREAD CLOSED
I can confirm. I've ordered one and is a good quality vinyl skin. It came with all needed tools to apply it and there was also a link to video instructions on how to do it. I went for carbon fibre black skin and red camera carbon fibre accent colour. The skin is as good as dbrand one I previously had installed.
It is a bit different thou. It leaves space for antenna bands. Where my previous one was covering whole of the phone. However my dbrand skin had accent colour camera skin as well which was applied on top of main skin leaving a slight hump on camera. This skin however has not have this problem.
Also as a UK resident the delivery was prompt. Where my dbrand skin took about 7 working days from Canada.
Hope this helps someone.
I like that they leave the antenna lines and a small gap around the logo. Gives it a nicer look and more stylish with the accents