Hi everyone,
I used flashtool on my laptop before. I successfully flashed to .73 using FTF file.
After that, I uninstalled everything. Now that I want to try the ICS, I reinstall PC Companion, then Flashtool, finally drivers in the flashtool/drivers folder.
When I start the flash, it is reported I don't have the drivers installed. I then installed Sony Update Services, reboot, back to flashtool still it says no drivers.
When I check on the help > drivers, I only have the USB drivers installed but not adb and the fastboot.
Any idea what's happening? Thanks
That happens because of window 7's campatibility problem
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
I'm korean and I'm using korean in window7. so some word can be wrong.
goto flashtool-drivers and right click flashtool-drivers.exe
choose attribute(bottom one)
and choose compatibility tap.
In compatibility mode, your choosing is maybe window7.
so change to vista service pack2.
do you do all?
than apply and
re right click icon and choose "launch with manager authority
that's all. finish
My goodness, I think it's because I didn't run the drivers installation with admin right. Geez, thanks, I will try it later.
Did It Work????
hello_hello said:
My goodness, I think it's because I didn't run the drivers installation with admin right. Geez, thanks, I will try it later.
Click to expand...
Click to collapse
pls i am trying to root my SXP....i tried hell a lot of methods....but failed.....i finally realised that it was due to my updated build .75....finally got flashtool....tried to run flashtool-drivers.exe with full admin rights......still failed to install the drivers.....pls helpme....am novice...thx in advance
Related
Last day I gonna to Odin back to sotck ED05, but my Window Xp SP3 have an virus infection, so I decided to Reinstall my Window SP3.
After I install, okie, I install Samsung driver, and download Odin in forum ( v1.7 ),
Okie, i'm going to connect my USB cable and open Odin, and have found COM port
After that, atlas_v2.2.pit, and ED05_FROYO_REL.tar.md5, Start, but....keep on "Setup Connection...", and "Set Partition" on Odin, and...stuck at this
After waiting about 40 minutes, I disconnect my cable, and try to re-Odin, but... my PC can't recognize after plug-ins, and can't connect via Odin
Try to restart PC, and re-connect, and my PC recognize afterall, but When I try to Odin, it just say " Setup Connection...". And sometimes my PC didn't recognize driver USB
Now, my phone can't connect to Charger ( but I can go to Download Mode without battery, but it useless because my Odin struck at "Setup Conntection..." )
What should I do now ?
Edit: use HEIMDALL to flash again, no thing happened. I use EB01 in this thread
http://forum.xda-developers.com/showthread.php?t=1026746
First times, try HEIMDALL, it's going to " Failed to access device. Error : -12 "
Second, try again, it's going to " Uploading PIT file", "Uploading factory filesystem", and...stop, nothing happened ( Process Bar is 0% )
Third, again, it's say Failed to retrieve config descriptor.....
So, Should I buy new phone ?
try odin 1.3 instead of 1.7
droidstyle said:
try odin 1.3 instead of 1.7
Click to expand...
Click to collapse
Agreed use Odin 1.3 or 1.7 or vice versa...I use vista home basic edition never had a problem except when I first got into flashing..after much trail and error of trying generic drivers, fascinate drivers and nexus drivers, as well as bunch of driver mender programs, it was as simple as uninstalling and re-installing my Samsung drivers...never had a problem since?! if your phone was recognized before I would try UN installing and re installing those same drivers...don't forget to reboot after...I hope it helps...but if you can get to download mode you're far from fully bricked...if that makes you feel better?! You will get your phone up and running again.
Sent from my SCH-I500 using XDA App
efan450 said:
Agreed use Odin 1.3 or 1.7 or vice versa...I use vista home basic edition never had a problem except when I first got into flashing..after much trail and error of trying generic drivers, fascinate drivers and nexus drivers, as well as bunch of driver mender programs, it was as simple as uninstalling and re-installing my Samsung drivers...never had a problem since?! if your phone was recognized before I would try UN installing and re installing those same drivers...don't forget to reboot after...I hope it helps...but if you can get to download mode you're far from fully bricked...if that makes you feel better?! You will get your phone up and running again.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
No, I've try Odin v1.3 and the same result: struck at "Setup Connection..."
Now my phone can't power on, and can't connect battery charger
The only thing I can do is put my Fascinate in Download Mode
I think I have an half - bricked
BIBUBO BCJ said:
No, I've try Odin v1.3 and the same result: struck at "Setup Connection..."
Now my phone can't power on, and can't connect battery charger
The only thing I can do is put my Fascinate in Download Mode
I think I have an half - bricked
Click to expand...
Click to collapse
If you want my opinion, from what it sounds like,I think it's a PC issue and not the phone. You say you can get to download mode..that's all you need to get it fixed. you just need to be able to enter download mode. you said you just re installed your os on your Pc due to a possible virus..I think that may be where your connectivity issues are stemming from the PC, not the phone...did you try reinstalling the fascinate drivers again?...I mean re download them and reinstall the freshly downloaded drivers?
Sent from my SCH-I500 using XDA App
efan450 said:
If you want my opinion, from what it sounds like,I think it's a PC issue and not the phone. You say you can get to download mode..that's all you need to get it fixed. you just need to be able to enter download mode. you said you just re installed your os on your Pc due to a possible virus..I think that may be where your connectivity issues are stemming from the PC, not the phone...did you try reinstalling the fascinate drivers again?...I mean re download them and reinstall the freshly downloaded drivers?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
thank, I think exactly like you ^_^. I'wll try again in fresh-another-PC , and waiting for something new
EDIT: No result, Try many times, struck on "Setup Connection..."
EDIT2: Ater fresh Window and install driver, struck at "param.lfs" ( when uncheck in Re-Partition, If I checked it, Odin also struck at "Setup Connection..." or "Re-Partition Failed" )
EDIT3: Complete(Write) operation failed. Odin also remove COM port
---------- Post added at 08:41 AM ---------- Previous post was at 08:00 AM ----------
anyone, please help me >_<
---------- Post added at 08:53 AM ---------- Previous post was at 08:41 AM ----------
EDIT4: Okie, check in Re-Partition, and .pit file, Set Partittion okie, but now I'm stuck at param.lfs
I'll try another USB port
BIBUBO BCJ said:
thank, I think exactly like you ^_^. I'wll try again in fresh-another-PC , and waiting for something new
EDIT: No result, Try many times, struck on "Setup Connection..."
EDIT2: Ater fresh Window and install driver, struck at "param.lfs" ( when uncheck in Re-Partition, If I checked it, Odin also struck at "Setup Connection..." or "Re-Partition Failed" )
EDIT3: Complete(Write) operation failed. Odin also remove COM port
---------- Post added at 08:41 AM ---------- Previous post was at 08:00 AM ----------
anyone, please help me >_<
---------- Post added at 08:53 AM ---------- Previous post was at 08:41 AM ----------
EDIT4: Okie, check in Re-Partition, and .pit file, Set Partittion okie, but now I'm stuck at param.lfs
I'll try another USB port
Click to expand...
Click to collapse
Okie, Problem is solved... It passed and is fired up !!!!! Again, Fascinations !!!
Thank you !!!
Glad to hear its working again such a bad feeling when your phone wont turn on.
hi
I did the following
download and install the latest Fashtool software ( flashtool-0.9.10.1-windows ) and I had installed the drivers .exe in the drivers folders
and selected all the devices and I am not able to flash sola to the new version of android
the log file at the attachment
Please help guys :'(
You need to install flashtool and fastboot drivers from the drivers installation file !!! But you shouldn't post that on development section !!
theokoukoulis said:
You need to install flashtool and fastboot drivers from the drivers installation file !!! But you shouldn't post that on development section !!
Click to expand...
Click to collapse
sry for posting in the wrong section ummm could u please explain more to me where are the files u talked about I told u
there is .exe file in the Flashtool\drivers folder I click on it and install it and I had select all the drivers in options list including the
flashmode and flashboot drivers from the list ?
is there anything else to do ??
thanks
What windows are using ??
ghost_j1 said:
sry for posting in the wrong section ummm could u please explain more to me where are the files u talked about I told u
there is .exe file in the Flashtool\drivers folder I click on it and install it and I had select all the drivers in options list including the
flashmode and flashboot drivers from the list ?
is there anything else to do ??
thanks
Click to expand...
Click to collapse
and here is screenshot for the option before and a link for the theard I follow to flash my device
http://talk.sonymobile.com/thread/39322
Download http://androxyde.github.com/index.html?1358686817000 flashtool from this link and tell me what windows are u using !!
---------- Post added at 03:12 PM ---------- Previous post was at 03:01 PM ----------
if you are using windows 8 u must do that http://forum.xda-developers.com/showthread.php?t=1982718 .. Cant help more!!!
theokoukoulis said:
Download http://androxyde.github.com/index.html?1358686817000 flashtool from this link and tell me what windows are u using !!
---------- Post added at 03:12 PM ---------- Previous post was at 03:01 PM ----------
if you are using windows 8 u must do that http://forum.xda-developers.com/showthread.php?t=1982718 .. Cant help more!!!
Click to expand...
Click to collapse
form the site you provide i downlaod the flashtool and i am running windows7 home edition
thanks
so guys anyone can help ???
Now see its a detailed tutorial...
Flastool version doesn't count much...
First of all get latest flastool which u already havr...
Install it...
Then open system drive open flashtool folder, in it open drivers folders click on it
Then tick the following
Xperia sola drivers
Flashmode.drivers
Fastboot drivers
Let them install windows will give warning message during installation
Click install drivers any way
Angain and again till drivers completely get installed, message will come many time everytime click install....
As the drivers get installed..
Put the downloaded firmware in C\flashtool\firmware folder...
Thrn open flashtool
Click on thunder icon
Their will be two icons
Click on flashmode\ ok
Select ur downloaded firmware...
It will prepare...
And after a message will come...
Its tim nw
Switch off ur phn
Then press vol+ button and then connect it wid usb...
It will start flashing..
And. By chance if.after sec it got disconnected...
Thenn disconnect ur phn wait it till it turns off..
Then again it will start flashing...
And ur done...
Its all abt timing
U were connecting ur phn before only connect when it says to connect...
And as u connect right the opened dialog shoing how to connect will close amd it will be started...
Thanx me if I helped...
Sent from my ST25i using xda premium
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
If still u had any problen pm me...
Ill add pics tutorial for u..
Sent from my ST25i using xda premium
happy3777 said:
Now see its a detailed tutorial...
Flastool version doesn't count much...
First of all get latest flastool which u already havr...
Install it...
Then open system drive open flashtool folder, in it open drivers folders click on it
Then tick the following
Xperia sola drivers
Flashmode.drivers
Fastboot drivers
Let them install windows will give warning message during installation
Click install drivers any way
Angain and again till drivers completely get installed, message will come many time everytime click install....
As the drivers get installed..
Put the downloaded firmware in C\flashtool\firmware folder...
Thrn open flashtool
Click on thunder icon
Their will be two icons
Click on flashmode\ ok
Select ur downloaded firmware...
It will prepare...
And after a message will come...
Its tim nw
Switch off ur phn
Then press vol+ button and then connect it wid usb...
It will start flashing..
And. By chance if.after sec it got disconnected...
Thenn disconnect ur phn wait it till it turns off..
Then again it will start flashing...
And ur done...
Its all abt timing
U were connecting ur phn before only connect when it says to connect...
And as u connect right the opened dialog shoing how to connect will close amd it will be started...
Thanx me if I helped...
Sent from my ST25i using xda premium
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
If still u had any problen pm me...
Ill add pics tutorial for u..
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
Thaaaankss alot man for the step by step explanation I was doing everything right except timing to connect my device
u r right "Its all abt timing"
Thanks again & I hit the thanks button
Problem solved :good:
hey guys, i've just formatted my PC and installed the latest flash tool, how come my phone is not detected in C:\Flashtool\x10flasher_lib?? i used "fastboot devices" and nothing is detected, i tried flashing kernel directly and as well nothing happen, it just says 'waiting for devices'
How can I solve this?? there's blue light on my phone already and driver has been installed, do I need to install S1 tool or what other things i missed out??my computer is totally clean now with all needed drivers and Win 8 pro installed .
PS: i've flashed many roms and kernel before already,so this is not my first time
First of all you post on a DEVELOPMENT forum....
did you enabled usb debugging?
did you update your flashtool to latest version?
Mr. Insomnia said:
First of all you post on a DEVELOPMENT forum....
did you enabled usb debugging?
did you update your flashtool to latest version?
Click to expand...
Click to collapse
sorry bout that,wrong section, plesae move it if any mod is online, yea,enabled it and latest flashtool
Flash stock firmware then try it
Have you install the Flashtool_Driver.exe and choose the correct driver based on your device?
use mass storage mode (msc)
Is yours windows 8? Fastboot has probs with it.
Sent from my MiniPro
i can't install fastboot drivers, it says error, google inc(winusb)....,so i gotta use back windows 7??
mnishamk said:
Is yours windows 8? Fastboot has probs with it.
Sent from my MiniPro
Click to expand...
Click to collapse
wong93 said:
i can't install fastboot drivers, it says error, google inc(winusb)....,so i gotta use back windows 7??
Click to expand...
Click to collapse
Im in Windows 8 and i dont see any problem with flashtool drivers
Do you see Google inc confirmation appears on your screen?
If yes, just check "always trust software from google inc" or something like that then just hit Yes, then you wont see that again ,
Hope helped
wong93 said:
i can't install fastboot drivers, it says error, google inc(winusb)....,so i gotta use back windows 7??
Click to expand...
Click to collapse
1.) Bring up Charms by mousing over to the right of the screen
2.) Go to Settings
3.) Change PC Settings
4.) General
5.) Scroll down to Advanced Startup > Restart Now
6.) Trouble shoot
7.) Advanced options
8.) Windows startup options
9.) Restart
10.) Choose F7 (I believe) or click on "Disable driver signature enforcement"
11.) Reboot
go and thank here
---------- Post added at 05:57 PM ---------- Previous post was at 05:53 PM ----------
alund said:
Im in Windows 8 and i dont see any problem with flashtool drivers
Do you see Google inc confirmation appears on your screen?
If yes, just check "always trust software from google inc" or something like that then just hit Yes, then you wont see that again ,
Hope helped
Click to expand...
Click to collapse
flashmode has no probs only when trying fastboot. don't you have probs with it?
Call me crazy or something but you have to search another same phone
and connect it your pc with MTP after your phones driver installed you are good to do all that things again cause I have gone through this got success with that.....
May be you can give a try.. Best of luck and if it worked plz do let me know.....
Sent from my ST15i using xda app-developers app
mnishamk said:
flashmode has no probs only when trying fastboot. don't you have probs with it?
Click to expand...
Click to collapse
uhm..
Im not sure, but a few days ago i've done rooting , unlocking , flashing and upgrading my friend's device to FXP 205 (Xperia Active) without any problem
i think im lucky
alund said:
uhm..
Im not sure, but a few days ago i've done rooting , unlocking , flashing and upgrading my friend's device to FXP 205 (Xperia Active) without any problem
i think im lucky
Click to expand...
Click to collapse
When I after installing drivers, tried flashing a kernel, it said remote unrecognised command bork and aborted. For any kernel
Sent from my Xperia Mini Pro
mnishamk said:
When I after installing drivers, tried flashing a kernel, it said remote unrecognised command bork and aborted. For any kernel
Sent from my Xperia Mini Pro
Click to expand...
Click to collapse
Maybe the device and your PC havent ready
did a notification about fastboot (usually indication about removable disk) in systray appear?
if yes , you shouldnt have any problem flashing any ftf or img
I m using xperia sola of FW 6.1.1.B.1.54. Due to bad performance ics in sola I decided to root sola and instal custom rom. First I tried binary recvr methode without unlocking BOOTLOADER.but. I failed bcuz FW. 54 cant follow this methode.to install custom rom one of xda memyber told me I need a unlocked BOOTLOADER.i read. Unlocking tutorial and downloaded flsh tool,fastbootzip evrything.As the fist instruction I connected sola in fastbootmode for install drivers by holding vol up button I cnnctd, a purple led appears and a bloom Sound from windows.suddenly purple changes to orange and no more messages on Windows!! I checked my device manager but thre is no name like "android" (i found a name "android " in device manager list in a video tutorial).I again checked driver installed in flash tool. Everything is okay. I connected again but same result!. I moved to next step, on cmnd box I entered the first keyword and a message came on cmd box 'waiting for device ' ...!!! Wat I do? please friends please help me. Whats the problem ?
Don't Worry!
thejaswynd said:
I m using xperia sola of FW 6.1.1.B.1.54. Due to bad performance ics in sola I decided to root sola and instal custom rom. First I tried binary recvr methode without unlocking BOOTLOADER.but. I failed bcuz FW. 54 cant follow this methode.to install custom rom one of xda memyber told me I need a unlocked BOOTLOADER.i read. Unlocking tutorial and downloaded flsh tool,fastbootzip evrything.As the fist instruction I connected sola in fastbootmode for install drivers by holding vol up button I cnnctd, a purple led appears and a bloom Sound from windows.suddenly purple changes to orange and no more messages on Windows!! I checked my device manager but thre is no name like "android" (i found a name "android " in device manager list in a video tutorial).I again checked driver installed in flash tool. Everything is okay. I connected again but same result!. I moved to next step, on cmnd box I entered the first keyword and a message came on cmd box 'waiting for device ' ...!!! Wat I do? please friends please help me. Whats the problem ?
Click to expand...
Click to collapse
Just download and install ADB in your PC and update your drivers in ADB
http://developer.android.com/tools/help/adb.html
This should solve it.
Make sure Tethering is ON in settings> Development
And a short cut is install Sony PC Companion and it will also install drivers for your phone!
This should work !
Good Luck
---------- Post added at 11:40 PM ---------- Previous post was at 11:36 PM ----------
thejaswynd said:
I m using xperia sola of FW 6.1.1.B.1.54. Due to bad performance ics in sola I decided to root sola and instal custom rom. First I tried binary recvr methode without unlocking BOOTLOADER.but. I failed bcuz FW. 54 cant follow this methode.to install custom rom one of xda memyber told me I need a unlocked BOOTLOADER.i read. Unlocking tutorial and downloaded flsh tool,fastbootzip evrything.As the fist instruction I connected sola in fastbootmode for install drivers by holding vol up button I cnnctd, a purple led appears and a bloom Sound from windows.suddenly purple changes to orange and no more messages on Windows!! I checked my device manager but thre is no name like "android" (i found a name "android " in device manager list in a video tutorial).I again checked driver installed in flash tool. Everything is okay. I connected again but same result!. I moved to next step, on cmnd box I entered the first keyword and a message came on cmd box 'waiting for device ' ...!!! Wat I do? please friends please help me. Whats the problem ?
Click to expand...
Click to collapse
Download Site
http://developer.android.com/sdk/index.html
Hnk1 said:
Just download and install ADB in your PC and update your drivers in ADB
http://developer.android.com/tools/help/adb.html
This should solve it.
Make sure Tethering is ON in settings> Development
And a short cut is install Sony PC Companion and it will also install drivers for your phone!
This should work !
Good Luck
---------- Post added at 11:40 PM ---------- Previous post was at 11:36 PM ----------
Download Site
http://developer.android.com/sdk/index.html
Click to expand...
Click to collapse
But I already installed PC combanion!.
thejaswynd said:
But I already installed PC combanion!.
Click to expand...
Click to collapse
Then you will need to make sure that PC companion isnot working in the background. You can check it in the taskbar.
Plus install the SDK with its driver if that doesnot work.
Make sure you are running as Administrator.
Hnk1 said:
Then you will need to make sure that PC companion isnot working in the background. You can check it in the taskbar.
Plus install the SDK with its driver if that doesnot work.
Make sure you are running as Administrator.
Click to expand...
Click to collapse
I am going to downlad sdk. but did there ia any other methode to unlock?
thejaswynd said:
But I already installed PC combanion!.
Click to expand...
Click to collapse
thejaswynd said:
I am going to downlad sdk. but did there ia any other methode to unlock?
Click to expand...
Click to collapse
To unlock your bootloader you will need to get that from SONY website only
I mean, SONY will send you a code and then you can unlock your bootloader.
I will send you the link.
OFFICIAL SONY
http://unlockbootloader.sonymobile.com/instructions
YOUTUBE TUTORIAL
http://www.youtube.com/watch?v=4o-wf7lId1M
Flash tool is used for STOCK rom installation and some custom roms support locked bootloader.
however, I used sony official website to unlock my bootloader
Hnk1 said:
To unlock your bootloader you will need to get that from SONY website only
I mean, SONY will send you a code and then you can unlock your bootloader.
I will send you the link.
OFFICIAL SONY
http://unlockbootloader.sonymobile.com/instructions
YOUTUBE TUTORIAL
http://www.youtube.com/watch?v=4o-wf7lId1M
Flash tool is used for STOCK rom installation and some custom roms support locked bootloader.
however, I used sony official website to unlock my bootloader
Click to expand...
Click to collapse
I downloaded the sdk (only sdk.zip about 105 MB not whole boundle! is that enough?)but it installs nothing!. again I checked my device manager (screenshot added)the android is still giving warning.how can I fix this? .after I opened flashtool and simply started flashing but an error massage came "error driver need to. be installed. now one thing I confirmed that I need to install driver!!!! but how?
thejaswynd said:
I downloaded the sdk (only sdk.zip about 105 MB not whole boundle! is that enough?)but it installs nothing!. again I checked my device manager (screenshot added)the android is still giving warning.how can I fix this? .after I opened flashtool and simply started flashing but an error massage came "error driver need to. be installed. now one thing I confirmed that I need to install driver!!!! but how?
Click to expand...
Click to collapse
The SDK i am using is about 420 MB in zip file and goes over 850 MB. So we are using different versions.
Secondly, When you open ADB, it asks you to update tools. There must be UPDATE DRIVERS. Install that and it should work. Make sure you run as administrator. I havenot seen any attachment with your post!
I downloaded it from here. 32 bit . Use according to your motherboard.
http://developer.android.com/sdk/index.html
Also, to flash your rom, you must have FTF file of STOCK. And your Sony PC companion shouldnot be running in the background.
I am attaching a file. You can easily tick the drivers you need to install as seen in the image.
You do not need to unlock your bootloader to flash STOCK rom, however, to install most of custom roms, You will need to unlock the bootloader.
More details here :
http://forum.xda-developers.com/showthread.php?t=2313638
thejaswynd said:
I downloaded the sdk (only sdk.zip about 105 MB not whole boundle! is that enough?)but it installs nothing!. again I checked my device manager (screenshot added)the android is still giving warning.how can I fix this? .after I opened flashtool and simply started flashing but an error massage came "error driver need to. be installed. now one thing I confirmed that I need to install driver!!!! but how?
Click to expand...
Click to collapse
I saw your attached thumbnail now.
Well you can not install it from there.
Download SDK and then in that list of things to be installed, INSTALL USB DRIVERS.
Good luck
OP, just read this.
I don't know why you guys make things difficult, he doesn't have to install SDK.
Just follow this tutorial...
http://androidlegend.com/how-to-unlock-bootloader-of-sony-xperia-u-st25i/
I know is for Xperia U but works on Sola too.
Sent from my MT27i using xda premium
---------- Post added at 06:34 PM ---------- Previous post was at 06:30 PM ----------
After that root by Binary's method and flash the ROM, any question, feel free to ask.
Sent from my MT27i using xda premium
Hi,
Please help me to fix this sony tablet S, it don´t boot, i try to update system from sd but it say "Prohibit update as a result of checking version or base sku".
The tablet model is SGPT112CO/S
I attach the log file of adb,
thanks
Anyone can help me with this please...
I don't use AIO and flash because i need to wait to experienced users comments and sugestions...
*nobody cares the faq* @stifilz We should do something about it.
Sent from my Sony Tablet S using xda app-developers app
The driver for windows "MTP device" not install because the service not exist, wich driver i can use for flasher?
Tha flasher show "waiting device"
Please help, what happen with this forum?
.:10101:. said:
Hi,
Please help me to fix this sony tablet S, it don´t boot, i try to update system from sd but it say "Prohibit update as a result of checking version or base sku".
The tablet model is SGPT112CO/S
I attach the log file of adb,
thanks
Click to expand...
Click to collapse
Need you to try install any zip twice in a row and then pull recovery.log again. That recovery log was 'blank'
I cant install the driver for atp device in windows and the flasher is waiting device, please help me with The driver, i try but none
smgdev said:
*nobody cares the faq* @stifilz We should do something about it.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
What more can we do? I got it stickied... LOL
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
.:10101:. said:
I cant install the driver for atp device in windows and the flasher is waiting device, please help me with The driver, i try but none
Click to expand...
Click to collapse
There is a guide for installing the drivers.... How can you bricked if it turns on? Nneeds to be on for flasher or at least Sony logo with USB debugging enabled?
stifilz said:
What more can we do? I got it stickied... LOL
---------- Post added at 03:18 PM ---------- Previous post was at 03:16 PM ----------
There is a guide for installing the drivers.... How can you bricked if it turns on? Nneeds to be on for flasher or at least Sony logo with USB debugging enabled?
Click to expand...
Click to collapse
Haha, yeah..
Sent from my Sony Tablet S using xda app-developers app
The tablet show the sony logo and when it is connect via usb windows show "Dispositivo MTP USB - Este dispositivo no puede iniciar. (Código 10)", the "Sony Tablet ADB Driver Automated Installer" are installed, what can i do?
how can i use AIO, flasher, ADB, if the driver MTP is not installed and i try all drivers but none does it?
The debugging mode is not enabled and the tablet stop in sony logo...
nobody can help me, please