I am trying to unlock my bootloader. I went through all the steps and couldn't get it to work. I am currently rooted and that is it. I put my phone into rsd mode, put the sbf into rsdlite and then plug my phone in. I click start and everything seems to work until it gets to 98%. The status says BP Pass Through and then it says failed. I am running rsdlite 5.6.
dwh1996 said:
I am trying to unlock my bootloader. I went through all the steps and couldn't get it to work. I am currently rooted and that is it. I put my phone into rsd mode, put the sbf into rsdlite and then plug my phone in. I click start and everything seems to work until it gets to 98%. The status says BP Pass Through and then it says failed. I am running rsdlite 5.6.
Click to expand...
Click to collapse
It's supposed to fail. After it does, boot into fastboot then issue the unlock commands in fastboot from your computer:
Code:
moto-fastboot oem unlock
copy the unique id that it spits out then
Code:
moto-fastboot oem unlock yourid
this assumes that you are inside the moto-fastboot directory or have added moto-fastboot or fastboot to your path.
Hey Guys,
I tried flashing my rom to CM7 and in the process the phone rebooted and got the error message
SVF:105:1:2
failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop countdown
Available modes are:
1. RSD
2. Fastboot
3. NVFlash
4. BP HW Bypass RSD
5. BP HW Bypass QC Dload
6. BP Diag & boot AP
7. BP HW bypass BP only
8. BP SW bypass RSD
9. Andriod Recovery
10 .Boot andriod (No BP)
11. Device UID
12. console=ttyS0,115200n8
13. Early USB Enumeration
14..BP tools
I get the error message in the rsd lite as error switching to BP and something.
Kindly help i am really confused.
Soft brick .
Download moto-fastboot, and unzip to C:\moto-fastboot
DL here:http://www.android-advice.com/file-d...rix_Root_Files
Download system image for 2.3.4 and unzip to moto-fastboot folder
DL here http://www.android-advice.com/file-d...bread_4591_ROM
Download atrix oem unlock and unzip to moto-fastboot folder
DL here:http://gititbit.ch/pub/unlock.zip
open cmd and navigate to C:\moto-fastboot\
Force fastboot on phone by holding down PWR and VOL UP while inserting battery.
Type these commands:
moto-fastboot oem unlock (it will show atrix ID re-enter with ID at end of line)
when finished, then enter these commands:
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot -w
moto-fastboot reboot
When it reboots, you will be back to stock, fully restored!!
I then used Pete's Motorola Tools to root my atrix.
Info and DL here http://www.psouza4.com/Bionic/
yes it did work on my atrix make sure usb debugging is on and unknown sources checked.
I then installed CWM to my Atrix
DL here http://forum.xda-developers.com/show....php?t=1475444
unzip to moto-fastboot, put atrix in fastboot mode and open cmd, navigate to moto-fastboot folder and type this:
moto-fastboot flash recovery recovery.img
Reboot and you are DONE!!!! All thats left is to find a ROM and you are good to go
No need to do all that.
Since you want to get CM7, Unlock the phone.
Ignore the instructions to flash system.img, that will bring you back to stock.
Enter fastboot, flash a recovery. (Above post last instruction)
Enter recovery mode, than flash CM7 from there.
(I assume you are familiar with what I am talking about, and don't require step by step instructions)
Bricked
Thank u for ur replies i havent tried it yet but i wish it wud work i was using the latest update from AT&T i think since i tried to boot for the older version this happened i am not sure though.
There has been posts about trying to unlock after applying AT&T latest update. You should read up on those, I remember it could brick your phone, be careful!
Thank You
Dear All,
Thank u a hundred thousand times for helping me get rid of the problem i owe u guys a lot finally got to work.
Thank u once again i dont have words to describe my joy.At ant time u want help in India count me in.
this happened to me to, all i did was go to fastboot and unlock the bootloader and it let me boot again after recovering to a rom i had on my SD. i did try and install a custom recovery when it bricked.
HI ranjit
Hi ranjith
need your help
can u drop in ur cell number
or call on 9860521352
thanks in advance
kumar brijwani
ranjithkumar1201 said:
dear all,
thank u a hundred thousand times for helping me get rid of the problem i owe u guys a lot finally got to work.
Thank u once again i dont have words to describe my joy.at ant time u want help in india count me in.
Click to expand...
Click to collapse
kumarbrijwani said:
Hi ranjith
need your help
can u drop in ur cell number
or call on 9860521352
thanks in advance
kumar brijwani
Click to expand...
Click to collapse
9036523279
feel free to sms me
i try to help you in anything i know
it would be better if you could message in Whatsapp
Sent from my MB860 using xda premium
DL here http://forum.xda-developers.com/show....php?t=1475444
error page not found
you can solve this problem....
tank's
hoaca388 said:
Soft brick .
Download moto-fastboot, and unzip to C:\moto-fastboot
DL here:http://www.android-advice.com/file-d...rix_Root_Files
Download system image for 2.3.4 and unzip to moto-fastboot folder
DL here http://www.android-advice.com/file-d...bread_4591_ROM
Download atrix oem unlock and unzip to moto-fastboot folder
DL here:http://gititbit.ch/pub/unlock.zip
open cmd and navigate to C:\moto-fastboot\
Force fastboot on phone by holding down PWR and VOL UP while inserting battery.
Type these commands:
moto-fastboot oem unlock (it will show atrix ID re-enter with ID at end of line)
when finished, then enter these commands:
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot -w
moto-fastboot reboot
When it reboots, you will be back to stock, fully restored!!
I then used Pete's Motorola Tools to root my atrix.
Info and DL here http://www.psouza4.com/Bionic/
yes it did work on my atrix make sure usb debugging is on and unknown sources checked.
I then installed CWM to my Atrix
DL here http://forum.xda-developers.com/show....php?t=1475444
unzip to moto-fastboot, put atrix in fastboot mode and open cmd, navigate to moto-fastboot folder and type this:
moto-fastboot flash recovery recovery.img
Reboot and you are DONE!!!! All thats left is to find a ROM and you are good to go
Click to expand...
Click to collapse
I have tried everything I can possibly imagine to try and get to fastboot mode. I can get to recovery and FTM mode and Download mode but not Fastboot for some reason. Im not sure what the button combos are for fastboot either. I plan on flashing the recovery and rooting my phone and adding a couple cool roms. I have ADB working good and I've tried to use adb reboot-bootloader but phone just restarts like normal even when clicking "boot bootloader" in recovery. My phone is the ZTE Z828. Any help would be greatly appreciated. Also, I have tried to do: fastboot devices in cmd after phone restarts but there are no devices in the list. Thanks again.
Hey, I wanna boot my SM-T116 to fastboot/bootloader mode but I dont know how, I did it on adb fastboot but it reboot, and dont boot into fastboot, Any help? Solution? Because i wanna root my tablet with Adb/fastboot
i have a Realme XT, that will no accept the twrp that im trying to flash to it, when i enter the command "fastboot flash recovery" and then the image file, the phone will just go to the fastboot logo and stay there till i turn the device off. please help, thank you.