A new ROM is available on Sony Update Service
File system Version : WORLD_6.0.B.3.162
FTF file
http://www.mediafire.com/?9obb5by30coep
Any improvements compared to the previous version.....
mohanparvatham said:
Any improvements compared to the previous version.....
Click to expand...
Click to collapse
Don't know....Dont't find
I´m not sure - after a full wipe and flash with flashtool, everything is configured. i´ve a lot of net drops, the device is next to my in an area with good signal. i´m not sure if this is a problem from the fw or a problem from outside...
Hey are there any other programs to flash then Odin? Because Odin doesnt recognize my phone.
Fastboot does but I cant flash stockr oms with it!
Thanks in advance
Hahahahhaha odin os for samsung, dude you massed it up a lot.
We use flash tool, which you can find in dev section.
Sent from my LT26i
Is this update available OTA yet for any regions? I have a generic UK model.
lebartman said:
A new ROM is available on Sony Update Service
File system Version : WORLD_6.0.B.3.162
Click to expand...
Click to collapse
Hopefully it fixes some of the issues with the phone.
I have updated the phone thru pc companion.....cam u please let me know how to convert into ftf file
Flash thru flash tool
Sent from my LT22i using xda premium
Related
Hello,
I updated my Xperia Mini Pro to ICS 4.0.4 last week. But there are lot of problems here. Also buggy and laggy.
So, how can I downgrade my mobile to original stock rom? without loosing the warranty. Because I bought this last month and I don't want it to lose warranty.
pramodblog said:
Hello,
I updated my Xperia Mini Pro to ICS 4.0.4 last week. But there are lot of problems here. Also buggy and laggy.
So, how can I downgrade my mobile to original stock rom? without loosing the warranty. Because I bought this last month and I don't want it to lose warranty.
Click to expand...
Click to collapse
Just visit a Sony service centre... Itseems they downgrade the Rom to gb if u want.
Or you can flash ftf firmware file using flashtool. I don't think that voids warranty:good:
Sudanminipro said:
Just visit a Sony service centre... Itseems they downgrade the Rom to gb if u want.
Or you can flash ftf firmware file using flashtool. I don't think that voids warranty:good:
Click to expand...
Click to collapse
Correct they wont know the difference between flashtool downgrade and normal gb from before. So for warranty you will fine.
use flash tool .. it wont void warrent , because you will flash OFFICAL ROM .. so wont void warrenty
But im a newbie. How to use flash tool? my phone is not x10 mini pro. It's SK17i Mini pro.
use this rom
http://forum.xda-developers.com/showthread.php?t=1818357
check this forum, everything you must know
http://forum.xda-developers.com/showthread.php?t=1568792
saeed-constantine said:
use this rom
http://forum.xda-developers.com/showthread.php?t=1818357
Click to expand...
Click to collapse
But the rom is modified. Isn't it? I need the original 2.3.4 build 4.0.2.A.0.58 rom... Please can u find me a link?
If you do want to keep your warranty, you need to go to a service center. If not it's more than easy on Android.
saeed-constantine said:
use this rom
http://forum.xda-developers.com/showthread.php?t=1818357
Click to expand...
Click to collapse
thanks man
pramodblog said:
Hello,
I updated my Xperia Mini Pro to ICS 4.0.4 last week. But there are lot of problems here. Also buggy and laggy.
So, how can I downgrade my mobile to original stock rom? without loosing the warranty. Because I bought this last month and I don't want it to lose warranty.
Click to expand...
Click to collapse
you can search for official rom for GB at the development area
be sure you install flash tool too
it wont loose your warranty
If I were you I would look here and go to XX.Downloads. At Number 2 there is xperia mini pro.
Download the 4.0.2.A.0.42 rom (for SK17i) and install flashtool, then click on the flash ,select flashmode and select the ftf from 4.0.2.A.0.42.
But install the drivers from the drivers folder of flashtool before.
Then click flash and power off your phone. Press and hold volume down and put usb cable in and connect to pc. The green light will shine.
Then flashtool will do everything automaticly and will flash the rom. (Btw all your data will be wiped!)
If you are on .42 then you can root with flashtool (just enable debugging and unknown sources on phone) and click the open padlock to root. Then connect to your wlan and search for updates on phone. Then update via ota to .62 firmware!
Thats the best way and it's the official firmware and it's like you never have been on ics before!
Michi_optimus_me said:
If I were you I would look here and go to XX.Downloads. At Number 2 there is xperia mini pro.
Download the 4.0.2.A.0.42 rom (for SK17i) and install flashtool, then click on the flash ,select flashmode and select the ftf from 4.0.2.A.0.42.
But install the drivers from the drivers folder of flashtool before.
Then click flash and power off your phone. Press and hold volume down and put usb cable in and connect to pc. The green light will shine.
Then flashtool will do everything automaticly and will flash the rom. (Btw all your data will be wiped!)
If you are on .42 then you can root with flashtool (just enable debugging and unknown sources on phone) and click the open padlock to root. Then connect to your wlan and search for updates on phone. Then update via ota to .62 firmware!
Thats the best way and it's the official firmware and it's like you never have been on ics before!
Click to expand...
Click to collapse
Thank you so much dude! I will do that. But i need to know that firmware is "world" one or is that a firmware made for a mobile company like AT&t or something else? Because I don't need to see a company logo when my phone is starting.
Also if I do this, am I able to update my OS to newer firmwares if SONY release it? Like ICS or JB?
pramodblog said:
Thank you so much dude! I will do that. But i need to know that firmware is "world" one or is that a firmware made for a mobile company like AT&t or something else? Because I don't need to see a company logo when my phone is starting.
Also if I do this, am I able to update my OS to newer firmwares if SONY release it? Like ICS or JB?
Click to expand...
Click to collapse
No they are GENERIC firmware so its all SONY made.
You can update your phone still:good:
pramodblog said:
Thank you so much dude! I will do that. But i need to know that firmware is "world" one or is that a firmware made for a mobile company like AT&t or something else? Because I don't need to see a company logo when my phone is starting.
Also if I do this, am I able to update my OS to newer firmwares if SONY release it? Like ICS or JB?
Click to expand...
Click to collapse
Yes, you can download from here and if your bootloader is locked you can still upgrade over the air (wlan) to newer versions of your os!
Yes you can install upgrades from sony, to ics or jb (if it's out).
I think it's polish rom or something like this, but you can choose your language and it's like the generic world, only the crap by sony (like things that are preinstalled, like mcaffee or whatsapp, playstore now, etc ) is different (whatsapp is on some sony roms preinstalled, but you can also download in playstore, it was just an example!!)
So just flash it like I told you and then you are on stock sony rom, you can root it (cause .42 you can root easily: just enable usb-debugging and unknown sources on your phone with 4.0.2.A.0.42 and click the open padlock next to the flash). Then you can update (if your bootloader is locked, otherwise your phone will brick) to .62 firmware, the latest gingerbread firmware by sony. ( I don't know excatly in which countries, but in Germany there is a .69 firmware, with no changes on the software, I think, compared to .62)
Greets!
Michael
Hi folks! Does anyone still have available a Gingerbread 2.3.4 stock-rom for the mini pro (sk17i)? I can't find any of them that i have backed up somewhere on my hdd
hertell said:
Hi folks! Does anyone still have available a Gingerbread 2.3.4 stock-rom for the mini pro (sk17i)? I can't find any of them that i have backed up somewhere on my hdd
Click to expand...
Click to collapse
Here. This the .62 global version.
http://www.mediafire.com/file/3gcfdlhivbbdcqa/SK17I_4.0.2.A.0.62_generic-ID.ftf/file
karandpr said:
Here. This the .62 global version.
http://www.mediafire.com/file/3gcfdlhivbbdcqa/SK17I_4.0.2.A.0.62_generic-ID.ftf/file
Click to expand...
Click to collapse
Thanks!! This saved my day
Hello everyone,
First of all this is my frist post, I'm sorry if I did something wrong.:silly:
I have rooted my xperia sola and flashed some mods, (Tweak&CPU - Xperia Z Launcher). I got .54 Official Rom, but Update Center keep saying there is an update. I tried many times to update but it says after rebooting "It has failed, Try Again."
What did I do wrong?
Thank you very much.
------
Screenshots (If It Helps)
You have unlocked bootloader right? Sony PCC have problems with such phones(mine too) showing that there is update, when you had already updated. Just ignore it for now, but you won't be able to install future updates
Sent from my MT27i using xda app-developers app
Oh thank you for information. I was just wondering if i did something wrong. Yes I unlocked BL. Anyways thanks again
Sent from my MT27i using Tapatalk 2
Do this , go to dialer , type #*#*7378423#*#*
Go to service info ---------> Software info
Check and POST the phone software version & File system version.
What's the difference between 'Phone Software Version' and 'File System Version' ?
I got different values.
It says Phone Software V : 6.1.1.B.1.10
File System V : 6.1.1.B.1.54
Sent from my MT27i using Tapatalk 2
404_Not_Found said:
What's the difference between 'Phone Software Version' and 'File System Version' ?
I got different values.
It says Phone Software V : 6.1.1.B.1.10
File System V : 6.1.1.B.1.54
Sent from my MT27i using Tapatalk 2
Click to expand...
Click to collapse
Ahh... a similar problem which i had ... the Phone software version is influenced by your kernel .. :silly:
Your kernel is based on b.1.10 and so your PCC assumes that your entire firmware is out of date and attempts to correct this though an update , which for obvious reasons , it can't cause you've unlocked your BL
Solution? Shift to an updated kernel of the one you are using , make sure it's either of the same version or higher than that of the ROM firmware .
Still if you cant get another kernel ,simply freeze the update app on Titanium Backup :victory:
Hope this helps ,
Press Thanks if it did =D
Bhargav4591 said:
Ahh... a similar problem which i had ... the Phone software version is influenced by your kernel .. :silly:
Your kernel is based on b.1.10 and so your PCC assumes that your entire firmware is out of date and attempts to correct this though an update , which for obvious reasons , it can't cause you've unlocked your BL
Solution? Shift to an updated kernel of the one you are using , make sure it's either of the same version or higher than that of the ROM firmware .
Still if you cant get another kernel ,simply freeze the update app on Titanium Backup :victory:
Hope this helps ,
Press Thanks if it did =D
Click to expand...
Click to collapse
Mine are 6.1.B.1.75 and 6.1.B.1.54 so I don't think updating will help.
asakurato said:
Mine are 6.1.B.1.75 and 6.1.B.1.54 so I don't think updating will help.
Click to expand...
Click to collapse
So you're being asked to update even though your kernel is based on 6.1.B.1.75 (higher) ... odd ...... try getting a kernel that matches your file system version i.e a 6.1.B.1.54 kernel(stock or custom) this should hopefully work . Else , since you've unlocked your BL ,why not use a custom ROM ?
I don't know how I got .75 sw version(about phone shows .54), but my kernel is based on latest official sources(Vengeance 1.26 kernel). When I asked developer about this, he said it's normal with unlocked BL. As for custom rom, I'm planning to install one, I'm just searching for one that fits me perfectly.
Sent from my MT27i using xda app-developers app
asakurato said:
I don't know how I got .75 sw version(about phone shows .54), but my kernel is based on latest official sources(Vengeance 1.26 kernel). When I asked developer about this, he said it's normal with unlocked BL. As for custom rom, I'm planning to install one, I'm just searching for one that fits me perfectly.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
If you're just annoyed with the update notification , freeze 'update center 'app via Titanium backup =P
ReFlash
ReFlash is a custom FTF bundle for easy flashing and unbricking of your phone.Features
Stock rom version 4.0.1.A.0.283 (Still vulnerable for the root exploits and has less bloat)
Baseband 36 (Tested as best and most reliable baseband for the T-Mobile 3G network in the netherlands.)
Fix OTA Bricks
Unlocks the vendor partition (And fixes vendor partition bricks)
Easily remove the extra bloat with the provided flashtool cleanup preset
Tests
Confirmed to work on
R800i with unlocked bootloader
R800i with OTA brick
Needs testing on (Use at own risk!)
R800i with locked bootloader
Models other then the R800i
Models with bad sectors
Please post your experiances with the above devices in this topic so i can add them to the confirmed working section.
Download
Flashtool Clean preset
Flashtool
Links updated on 19-10-2021
can someone reupload the bundle? I have r800i with boot loop, and don't really know what to do with it.
Please reup
needing this also, i have a r800i that every time fails flashing system partition
Are you using newest flashtool? Try older version, 0.9.18.4
kiriki-kun said:
Are you using newest flashtool? Try older version, 0.9.18.4
Click to expand...
Click to collapse
Yes I'm using older version. It fails to flash any system.sin when flashing FTF, and when flashing kernels it says the device must be rooted first. was on cm13 and when I wanted to revert back and flash older Android version it fooked up. I have other 3 or 4 xplays and they reverted back from cm13 custom partition just fine..
second on reup request if possible
Sorry for the late response, i never deleted it from my Mega account and i was not aware the links where broken.
I moved on from this phone long ago so i don't check the forum very often, but the file is now available once more for those with bricks.
Thanks, i think this can be very helpful
Thanks for this. Needed to do a reflash to stock as something had become corrupted with mine and wouldnt load any apps. Havent used flashtool for years and was surprised that I managed to flash with windows 10 64 bits too which I wasnt expecting.
r800i SI-1247-2960 TMOBİLE ROM FTF NEED İT? MY DEVİCE BOOTLOOP HELP ME
rapboy23 said:
r800i SI-1247-2960 TMOBİLE ROM FTF NEED İT? MY DEVİCE BOOTLOOP HELP ME
Click to expand...
Click to collapse
I do not have a copy of the Tmobile FTF, however since your device is a r800i ReFlash should work for you and changes it to a non branded Xperia Play.
I come from 4.2 pre-rooted deodexed rom. Can I just flash the zip file of Dogg Rom v4.3 from recovery or do I have to flash. 290 FTF first?
Thanks
--
I posted it here cause apparently after 3 years of being on XDA, I can't post in developer's section, because I never had anything to ask!
Sent from my C6833 using XDA Premium HD app
seltoon said:
I come from 4.2 pre-rooted deodexed rom. Can I just flash the zip file of Dogg Rom v4.3 from recovery or do I have to flash. 290 FTF first?
Thanks
--
I posted it here cause apparently after 3 years of being on XDA, I can't post in developer's section, because I never had anything to ask!
Sent from my C6833 using XDA Premium HD app
Click to expand...
Click to collapse
I have not tried from 4.2 stock, but no harm in trying. Just have the latest flashtool ready and a 290 .ftf. You do have an unlocked bootloader as well?
Yes, but I don't have a good Internet at the moment so I wanted to skip the download of FTF
Sent from Sony Xperia Z Ultra
@hamdogg ?
you may have to flash the boot.img from the .zip to get a working recovery? read post 3 of DogGrom!
If it all goes to pot you will want a ftf to flash to get a working phone again... and alwar use protection - if have a backup
seltoon said:
Yes, but I don't have a good Internet at the moment so I wanted to skip the download of FTF
Sent from Sony Xperia Z Ultra
Click to expand...
Click to collapse
blueether said:
@hamdogg ?
you may have to flash the boot.img from the .zip to get a working recovery? read post 3 of DogGrom!
If it all goes to pot you will want a ftf to flash to get a working phone again... and alwar use protection - if have a backup
Click to expand...
Click to collapse
Hi all...
umm yes it should work. I've not tried flashing ontop of 4.2.2.... but its a sony base, and the most important files will be replaced when you flash the new ROM...
But like blue said... if it doesn't work then you'll need to
1- flash the .290 FTF
2- then recovery, and then
3 -doggROM..
hamdogg said:
Hi all...
umm yes it should work. I've not tried flashing ontop of 4.2.2.... but its a sony base, and the most important files will be replaced when you flash the new ROM...
But like blue said... if it doesn't work then you'll need to
1- flash the .290 FTF
2- then recovery, and then
3 -doggROM..
Click to expand...
Click to collapse
Thanks for your help man. I'll report back with
Sent from Sony Xperia Z Ultra
Does anyone have this issue?
I flashed the latest Oreo zip with twrp & used that for some days. now I want to revert back to stock .291 ftf.
But flashtool fails. I used the same flashtool, same firmware files multiple times to revertback to stock. But now It says
.....Something like not for this device... >Older flashtool(searched & found this solution but not worked)
...Something like bundle is not valid...>The flashtool that I used before & successfully flashed.
Those error indicates my firmware file isn't for my device. but Believe me IT IS~!!
But to clear my understanding I downloaded fresh firmware from Xperifirm not worked.
Then I searched and downloaded firmware from XDA but ALAS! Not worked either.
I uninstalled and reinstalled 3 different versions of flashtool but nothing positive.
I think, Flashing oreo made some changes to our device & it's no longer a Xperia z2(on software sense i mean).
What to do. Anyone tried flashing stock .291 or any other older firmware after flashing OREO???
Sony Z2-D6503
namefaisal said:
Does anyone have this issue?
I flashed the latest Oreo zip with twrp & used that for some days. now I want to revert back to stock .291 ftf.
But flashtool fails. I used the same flashtool, same firmware files multiple times to revertback to stock. But now It says
.....Something like not for this device... >Older flashtool(searched & found this solution but not worked)
...Something like bundle is not valid...>The flashtool that I used before & successfully flashed.
Those error indicates my firmware file isn't for my device. but Believe me IT IS~!!
But to clear my understanding I downloaded fresh firmware from Xperifirm not worked.
Then I searched and downloaded firmware from XDA but ALAS! Not worked either.
I uninstalled and reinstalled 3 different versions of flashtool but nothing positive.
I think, Flashing oreo made some changes to our device & it's no longer a Xperia z2(on software sense i mean).
What to do. Anyone tried flashing stock .291 or any other older firmware after flashing OREO???
Click to expand...
Click to collapse
U Canu use older flashtool only v9.18.6... then, finally ur Firmware work for sony z2.... good luck frnd.This verson work for me...
Solved
srifal said:
U Canu use older flashtool only v9.18.6... then, finally ur Firmware work for sony z2.... good luck frnd.This verson work for me...
Click to expand...
Click to collapse
Yeah, thanks a lot. your version worked.
For someone facing same issue:
Download flashtool http://www.mediafire.com/file/n2b1yvbie6e0ywm/flashtool-0.9.18.6-windows.zip
Install it & then install the driver located in C:\Flashtool\drivers
Download .291 ftf(I mean the last one) https://androidfilehost.com/?fid=457095661767151138
best of luck :highfive:
Bro if I unlocked bootloader can I flash the original software... Plz help
---------- Post added at 11:08 AM ---------- Previous post was at 11:08 AM ----------
Becz I unlocked it...
namefaisal said:
Yeah, thanks a lot. your version worked.
For someone facing same issue:
Download flashtool http://www.mediafire.com/file/n2b1yvbie6e0ywm/flashtool-0.9.18.6-windows.zip
Install it & then install the driver located in C:\Flashtool\drivers
Download .291 ftf(I mean the last one) https://androidfilehost.com/?fid=457095661767151138
best of luck :highfive:
Click to expand...
Click to collapse
Bro what is the password...
Yeah, Why not? I'm using unlocked z2 myself!!
Cr1is said:
Bro if I unlocked bootloader can I flash the original software... Plz help
---------- Post added at 11:08 AM ---------- Previous post was at 11:08 AM ----------
Becz I unlocked it...
Click to expand...
Click to collapse
No Problem being a Unlocked z2!
I have unlocked it on 2015. since then I did everything(including official ftf firmware flashing) NO ISSUES EVER.
Cr1is said:
Bro what is the password...
Click to expand...
Click to collapse
Which file contains password? I don't remember having a password but if the firmware zip file has a pass then I can upload the ftf file without password as I have extracted it already.
If it's flashtool then just install any old version.