Hey.
Since i installed Cyanogen mod 7, I've been in big problems.
So I tried to NVFlash (forum.xda-developers.c o m/showthread.php?t=1044326&page=1) NOTE! Remove spaces between com
But after having entered the command into command prompt, it gives me this error:
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 14 NvError 0x120000
command failure: partition download failed
What do i do? Other people have the same problem. See page 28 int he thread (Link above)
I couldn't post in the thread itself, as i am a new user.
Thanks for all help!
search at the forum
budak_getah said:
search at the forum
Click to expand...
Click to collapse
Tried that, didn't help too much.
Com on guys! (And girls) Urgent! need help here! :/
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
Related
I am looking for update my ATT dell Streak with O2 2.1 on it to DjSteve Rom but i am not been able to do anything using MAC ?
can someone please help me how can i make it happen using mac
You can do all the steps list on the Mac without issue.
1) Install the Android SDK and make sure it is in your system path so the commands will be recognized.
2) Follow the rest of the steps, but when using fastboot make sure to use the PC commands, not the Mac (Mac commands did not work for me)
If you give me specifics of where you are I may be able to help
you dont need to download the SDK, just grab the fastboot files
Not Android Development you could have asked the question in steves thread and not created a new thread
lufc said:
Not Android Development you could have asked the question in steves thread and not created a new thread
Click to expand...
Click to collapse
Well i did asked this question there since its the common sense but when i did not got any reply that is when decided to post a new thread
Alright so i was able to download the fastboot file for mac and put it on desktop but when i am entering fastboot command it is giving me an error fastboot command not found ?
" -bash: fastboot: command not found "
what the hell does that means ?
http://www.streaksmart.com/2010/11/how-to-get-official-android-22-update-on-dell-streak.html
this is guide i am trying to follow
are you doing "fastboot" or "./fastboot"?
paincorp said:
are you doing "fastboot" or "./fastboot"?
Click to expand...
Click to collapse
I am doing "fastboot"
vikramdhani said:
I am doing "fastboot"
Click to expand...
Click to collapse
try ./fastboot followed by the rest of the command
Hi everyone
Thank you for looking into my problem which is:
I got a viewsonic 10s tablet working on android
it was working fine, i rooted using z4root and all is still OK.
The problem came when i tried to replace the libware files to enable the connected Arabic language, then after booting it will get stuck on the droid logo.
is there a way to re-flash the rom. i have not installed recovery yet and i could not boot in a recovery mode.
Any help would be appreciated.
Thanks in advance
Best regards
come on guys
More than 90 views and no one can direct me to the right choice
well, you posted in the viewpad 7 dev, not really the place to post these questions. I would help you, but don't know anything about the viewpad 10
it says viewpad 7 and variants. i suppose it is the same, isnt it.
i did not find viewpad 10
This is still the development forum, which is only supposed to be used for posts about new software development, try asking this in general.
Maybe some admin can move the thread ?
Amalgation said:
This is still the development forum, which is only supposed to be used for posts about new software development, try asking this in general.
Maybe some admin can move the thread ?
Click to expand...
Click to collapse
Did you manage to fix the problem?
My Viewpad is bricked. Cannot boot it anymore.
When I to install a new rom i get the following error
Code:
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
sending file: recovery.img
\ 5064704/5064704 bytes sent
recovery.img sent successfully
sending file: boot.img
\ 4311040/4311040 bytes sent
boot.img sent successfully
sending file: system.img
/ 3145728/120449472 bytes sentdata send failed NvError 0x120002
command failure: create failed (bad data)
Press enter to continue:
As I have followed some instructions to run fastboot command in my pc , however my pc showed " CANNOT RECOGNISED IT IS EXTERNAL OR INTERNAL COMMAND " What's wrong ?
Pls. help me !
nicolas russell said:
As I have followed some instructions to run fastboot command in my pc , however my pc showed " CANNOT RECOGNISED IT IS EXTERNAL OR INTERNAL COMMAND " What's wrong ?
Pls. help me !
Click to expand...
Click to collapse
1) you need to read some more
2) you probably open the command prompt from the wrong folder
3) you haven't set your environment paths
If you don't know what 2 and 3 mean then that proves you haven't done enough of number 1
Thank you !
Dear cdzo72
Thanks for your advices that I can flash any custom recovery to my Dell Streak 5 , but new question come : Whethet not all recoveries applicable to Dell Streak 5 or some technical problems which I cannot still tackle ?
nicolas russell said:
Dear cdzo72
Thanks for your advices that I can flash any custom recovery to my Dell Streak 5 , but new question come : Whethet not all recoveries applicable to Dell Streak 5 or some technical problems which I cannot still tackle ?
Click to expand...
Click to collapse
First of all what are you trying to get accomplish?
By flashing StreakMod you are then able to flash zip files (custom ROM's, themes, etc...)
Stock recoveries are for flashing stock ROM update packages. The recovery has to match the ROM or at least the region.
Now let me say this again as politely as possible.... The fact that you asked what you did proves 1 of two things.... You haven't read OR you don't understand what you're reading. In either case I strongly suggest you get a grasp of what you are doing BEFORE you end up with a device you can't repair
Sent from my cm_tenderloin using Tapatalk 2
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Hi Guys,
I am trying to transfer firmware to my OnePlus 2 via adb sideload after my phone got into a poweron loop. I deleted all the data on the phone.
Now it does not finish the firmware load it returns error "* failed to read command: No error"
How can I overcome this. Please help.
jamespropa said:
Hi Guys, I am trying to transfer firmware to my OnePlus 2 via adb sideload after my phone got into a poweron loop...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3146584
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Hi there
i need some help because I cant find an answer after long searching:
I have installed TWRP and rooted my galaxy s7 edge according to the guide from here. After that I installed the TGP custom firmware by rebooting into TWRP, click on 'format data' and flashed the zip file. All is working perfect. But then i tried to install Youtube Vanced, its also a zip file. So I reboot into TWRP, trying to flash and got the error message I wrote above. Do I have to always format data first to mount the /data storage? This method is very time wasting, is there an other solution to flash zip files with root?
thanks
siderxx22 said:
Hi there, i need some help because I cant find an answer after long searching:.........
Click to expand...
Click to collapse
I don't have this device but, I believe that the following thread should be helpful for what you are looking for. Don't be afraid to ask for some member guidance too.
https://forum.xda-developers.com/showthread.php?t=3882238
Also, the following is the Q&A thread that's specific to your device and variants if needed.
https://forum.xda-developers.com/showthread.php?t=3489011
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Enigma Machine {aenigma = Latin for "Riddle"}.