Okay let's begin,
I've try to remove CWM by using this :
http://forum.xda-developers.com/showpost.php?p=20447149&postcount=47
The first step was okay : 1) Delete file /system/bin/mot_boot_mode
The second : 2) Rename file /system/bin/mot_boot_mode.bin to /system/bin/mot_boot_mode
I've never found mot_boot_mode.bin, so I said to myself ... okay no big deal let me try something else.
I try
http://forum.xda-developers.com/showthread.php?t=1385283
RAZR-CWMOnBoot-Remove-J.Y.Daddy.zip
Flash through recovery.
After that i'm stuck at the motorola logo.
What Can I do ?
Thx guy
If your phone won't boot past the Motorola/Dual Core screen then you may need to use the Droid Razr Utility or RSD Lite to flash back to regular old stock.
Droid Razr Utility: http://forum.xda-developers.com/showthread.php?t=1526113
RSD Lite: http://forum.xda-developers.com/showthread.php?t=1540648
I can't find any fastboot working on my razr.
I'm using a GSM Razr from Rogers
It always Fail and the status said : Failed flashing process. 1/21 flash mbm"allow_mbmloader_flashing_mbm.bin" -> Phone returned FAIL.
http://sbf.droid-developers.org/umts_spyder/list.php
Gesendet von meinem XT910 mit Tapatalk 2
Gufsl1 said:
Okay let's begin,
I've try to remove CWM by using this :
http://forum.xda-developers.com/showpost.php?p=20447149&postcount=47
The first step was okay : 1) Delete file /system/bin/mot_boot_mode
The second : 2) Rename file /system/bin/mot_boot_mode.bin to /system/bin/mot_boot_mode
I've never found mot_boot_mode.bin, so I said to myself ... okay no big deal let me try something else.
I try
http://forum.xda-developers.com/showthread.php?t=1385283
RAZR-CWMOnBoot-Remove-J.Y.Daddy.zip
Flash through recovery.
After that i'm stuck at the motorola logo.
What Can I do ?
Thx guy
Click to expand...
Click to collapse
If there wasn't any .bin files to rename that means your stock bootloader wasn't backed up (which is rather strange). You'll have to use RSD to get back to stock and start over again. You may want to consider installing safe strap instead of bootstrap, doesn't mess with OTAs
I'm currently waiting for a factory fastboot cable ... my phone is dead and I've found no way to charged it.
So what you are telling me xXxTehxXx is that if I use RSD and flash this file :
Rogers_XT910_SignedLATAM_167-SLC-M33.1_P042_A014_CFC_1FF_fastboot`
I should be okay ?
Related
my friends,i have flashed a rom and dident boot and deleted the cwm.probably is for gsm or cdma and i dont now the way how to find it out my razr if it is cdma or gsm.well my problem is i cant find an official rom to flash with RSD lite,i am flasing from here http://forum.xda-developers.com/showthread.php?t=1362956 the xml file but rsd fails..what i must do?thank you for your time!
paris07121978 said:
my friends,i have flashed a rom and dident boot and deleted the cwm.probably is for gsm or cdma and i dont now the way how to find it out my razr if it is cdma or gsm.well my problem is i cant find an official rom to flash with RSD lite,i am flasing from here http://forum.xda-developers.com/showthread.php?t=1362956 the xml file but rsd fails..what i must do?thank you for your time!
Click to expand...
Click to collapse
need details ,which rom did you flash ? what is your model CDM or GSM etc.
Also, why does RSD Lite fail?
i dont now but i think a have gsm version because i flashed this rom before it brakes http://forum.xda-developers.com/showthread.php?t=1552166 and was working.After this,i dont remember which rom i flash and my phone braked.When my phone braked i tried all roms from here http://forum.xda-developers.com/showthread.php?t=1362956 flashed with RSDlite and all roms say fail in RSDlite(and all its so big rom 800mb?)what i am doing wrong?i bought it 3 days ago and i dont want to throw it to the garbage!!
paris07121978 said:
i dont now but i think a have gsm version because i flashed this rom before it brakes http://forum.xda-developers.com/showthread.php?t=1552166 and was working.After this,i dont remember which rom i flash and my phone braked.When my phone braked i tried all roms from here http://forum.xda-developers.com/showthread.php?t=1362956 flashed with RSDlite and all roms say fail in RSDlite(and all its so big rom 800mb?)what i am doing wrong?i bought it 3 days ago and i dont want to throw it to the garbage!!
Click to expand...
Click to collapse
When you downloaded the fastboot files and went to flash it in RSD Lite, did you extract the zip first? After you download the stock ROM you need to extract the zip file, then use RSD Lite to select the xml file and flash it.
Sent from my AXI0M ICS RAZR using tapatalk.
spc_hicks09 said:
When you downloaded the fastboot files and went to flash it in RSD Lite, did you extract the zip first? After you download the stock ROM you need to extract the zip file, then use RSD Lite to select the xml file and flash it.
Sent from my AXI0M ICS RAZR using tapatalk.
Click to expand...
Click to collapse
i did this steps
1 download drivers motorola
2 download rsd lite 5.6
3 download official rom
-
1 make sure drivers recongized my divice
2 extract rom and place it in new folder(rom incuds an ota file and many other like the xml)
3 when phone is close puse power button-volume down-volume up and select fastboot
4 connet to pc
5 open the rsd navigate to xml file puse start and fails
,,but what you mean downloaded the fastboot files?its already in the divice?
When youre in AP Fastboot Mode do you read Battery Low? If so, you have to get a Factory Cable or build one on your own. I did it otherwise, I removed my back cutted an old USB Cable and Connected the Red (+) and Black (-) cable directly to the Battery under the Backcover. Then I was able to Flash everything via Fastboot or RSD Lite.
I try to restore my phone from this thread http://forum.xda-developers.com/showthread.php?p=26039594
but I got failure after trying the T-mobile ICS update file.
It comes up like this on screen:
" error in /tmp/sideload/package.zip
(Status 7)"
I have many ways try to wipe and restore data before and after the update file from sd card.
bootloader/ kernel is 0A.6C one screen
I have try different ways for 6 hours with no luck, grrrrr
My phone is now bricked, maybe i must sendt him to rep...
Helpfor a possible solution will good. Thanks
Sorry for my bad english
Edit: I was on T-Mobile ICS before I try to flash the new ICS EU
TheMask1 said:
Thank, thank you
I'm back on stock ICS T-mobile again
I will try too go for ICs EU version later.
Click to expand...
Click to collapse
What have you done after that?
Gesendet von meinem XT910
HSD-Pilot said:
What have you done after that?
Gesendet von meinem XT910
Click to expand...
Click to collapse
In this morning I try to flash the new ICS EU again.
I Fastboot flash the boot_ne.img and ffastboot flash the system.img.
But got failure: error in /tmp/sideload/package.zip
(Status 7) when I try to update ICS from sd card.
After that I have try to restore too T-mobile version with no luck
Just in mind > You got 2 Update zips on your SD now. You tried the right one for the new Leak?
Gesendet von meinem XT910
TheMask1 said:
I try to restore my phone from this thread http://forum.xda-developers.com/showthread.php?p=26039594
but I got failure after trying the T-mobile ICS update file.
It comes up like this on screen:
" error in /tmp/sideload/package.zip
(Status 7)"
I have many ways try to wipe and restore data before and after the update file from sd card.
bootloader/ kernel is 0A.6C one screen
I have try different ways for 6 hours with no luck, grrrrr
My phone is now bricked, maybe i must sendt him to rep...
Helpfor a possible solution will good. Thanks
Sorry for my bad english
Edit: I was on T-Mobile ICS before I try to flash the new ICS EU
Click to expand...
Click to collapse
You must wipe cache, then install the zip again. Of course you must flash the new leak, not T-Mo.
Edit: Otherwise you could extract the t-Mo ICS zip to your harddrive. The pick the cdt.bin_signed, devtree_signed, and all mbm-files and flash them via moto-fastboot. Then flash the t-mo 2.3.6 system_signed again and reboot into recovery, perform a full wipe and cache wipe. Then apply the ICS update.zip.
Or if you want to try the newest leak, just do the same steps using the 2.3.6 26 fastboot and the new ICS zip.
dtrail1 said:
You must wipe cache, then install the zip again. Of course you must flash the new leak, not T-Mo.
Click to expand...
Click to collapse
So this is a way to go to a newer ICS leak from the T-Mo leak? Just flash the zip from recovery after wiping /cache?
stangri said:
So this is a way to go to a newer ICS leak from the T-Mo leak? Just flash the zip from recovery after wiping /cache?
Click to expand...
Click to collapse
Read my edit above. But in normal case you must not wipe anything, just flash the system_signed from the 26 fastboot and then apply the update zip from the new leak.
Edit: Also the boot_new.img has to be flashed before applying the update.
Here it is: http://www.mediafire.com/?rh4flyvuo5lej9w
HSD-Pilot said:
Just in mind > You got 2 Update zips on your SD now. You tried the right one for the new Leak?
Gesendet von meinem XT910
Click to expand...
Click to collapse
Yes I know about that , and have format the SD card i tried again
Hey mate, I've tried by myself now. I got the same error like you described. Then I did directly a cache wipe and it succeeded!
dtrail1 said:
Hey mate, I've tried by myself now. I got the same error like you described. Then I did directly a cache wipe and it succeeded!
Click to expand...
Click to collapse
I try again and again here, Must have a look at the battery status in between. Charge it from exit fastboot mode.
dtrail1 said:
Hey mate, I've tried by myself now. I got the same error like you described. Then I did directly a cache wipe and it succeeded!
Click to expand...
Click to collapse
Hey mate. Have you lost the root permissions? Could you create a step by step?
I tried also to flash the boot_new.img with sdk tools.
Commande: fastboot flash boot boot_new.img
But got this failurebootloader) Preflash validation failure
Failed (remote: )
Something is wrong but what???
Put the etrj fastboot on your Desktop and use the Windows Terminal (cmd)
Works flawless for me...
Gesendet von meinem XT910
TheMask1 said:
I tried also to flash the boot_new.img with sdk tools.
Commande: fastboot flash boot boot_new.img
But got this failurebootloader) Preflash validation failure
Failed (remote: )
Something is wrong but what???
Click to expand...
Click to collapse
Normal fastboot won't work. Use the moto-fastboot or the eprj-mfastboot.
---------- Post added at 08:22 PM ---------- Previous post was at 08:20 PM ----------
SoulGraphicsBrand said:
Hey mate. Have you lost the root permissions? Could you create a step by step?
Click to expand...
Click to collapse
There is already a step-by-step in the other thread wehere you can get the files. And I had no root before so there wasn't anything to loose If you running on rooted leak, you shouldn't flash this one. Search the forums, there is one guy who successful flshed the ICS nandroid backup to his device. This will persist your root.
dtrail1 said:
Read my edit above. But in normal case you must not wipe anything, just flash the system_signed from the 26 fastboot and then apply the update zip from the new leak.
Edit: Also the boot_new.img has to be flashed before applying the update.
Here it is: http://www.mediafire.com/?rh4flyvuo5lej9w
Click to expand...
Click to collapse
Thanks, got the boot_new.img you've linked, but just to be safe (and because I'm confused by the OTA numbering) can you please post a link to the newest OTA I can grab the system_signed from and then use it for the update from recovery?
Also, should I temp unroot and then re-root with the rootkeeper as with the T-mo 4.0.4 OTA update? Is there other way to keep root?
BTW, I've seen you refer to the .26 fastboot (and saying it doesn't have the best radio for Germany where I am at the moment), but the latest leak I've seen mentioned in the other thread is Blur_Version.672.180.17.XT910.Retail.en.EU (Tue May 22 17:20:36 CST 2012). Is it the same build as .26?
Sorry, hit the Thanks Button in Tapatalk
The Radio seems to be better on this ICS. I was on 651.167.26 for an while and the Phone quality was not really good. Tested it today on the Leak and all seems to be fine now.
you need the system_signed from the 651.167.26 to flash the new Leak.
Flash the boot_new.img & the system_signed in AP Fastboot and after that boot in Moto Recovery and flash the Leak.
http://www.handy-faq.de/forum/motorola_razr_forum/249903-motorola_ics_leak_retail_22_05_2012_a.html
Maybe it helps..
YES YES I finished with flashing the new OTA update eu ICS: Blur_Version.651.167.26.XT910.Retail.en.EU
System version 672.180.17.XT910 on my phone.
This is what i do to solved my flashing problems:
1. Used Andriod SDK tool to flash boot_new.img
Command: fastboot flash boot boot_new.img
2. Flashed the SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot
with Kholks:
EternityProject's RSD Alternative for flashing OFFICIAL Motorola ROMs
Was some failure during the flashing, but system_signed was flashed. .
3. Then I try to install OTA update Blur_Version.651.167.26.XT910.Retail.en.EU directly but failed.
- Then I erased cashe, tried agian, but failed.
- At last I Wipe data and restore then install the update with succes.
I'M so Happy now.
Big big Thanks to HSD-Pilot, DTrail1, Whirleyes, and Spryte
It's a top forum, thanks to all.
Regards
Jan
do you have root?
pty.ltd said:
do you have root?
Click to expand...
Click to collapse
Not now, I flash and reflash so many times before I was up and go, so lost my root
But I'm happy with the newest ICS eu, so I can wait for a root metode later
hi, im trying to update my razr with 651.167.22.en.FR update, but i cant, i made that steps:
1º install via OTA (fail)
2º install via USB (fail)
3º get the file c:\programdata\motorola\sue\firmware, copy in SD and execute (fail)
in the log, the error is that i dont have the file arcvideoeditorlite.apk in \system\app, i was delete this app, but with root explorer i put it in \system\app with the same permissions and with systemcleanup i cahnger to system app, can you help me?
sorry about my english, im spanish
thanks
Flash it via fastboot. Done.
ok, can you say me how can i make it?
You have to download the right fastboot file (651.167.22), RSD lite 5.7 and if needed Motohelper USB drivers. Then unzip the fastboot file, run RSD and select the xml-file found in the unzipped fastboot folder. Plug your device to the computer via USB cable, click flash button in RSD, tge device will reboot into fastboot AP automatically and gets flashed. when finished it will reboot itself. Done. If something is not clear, search in the forums or google for RSD to get better instructions.
Gesendet von meinem XT910 mit Tapatalk 2
thank you, but i preffer to use the OTA option, you know what can i do for repair my phone?
in the case you said, i preffer to download a 4.0 image and have ICS in my phone
urrakis said:
thank you, but i preffer to use the OTA option, you know what can i do for repair my phone?
in the case you said, i preffer to download a 4.0 image and have ICS in my phone
Click to expand...
Click to collapse
To install an OTA you need to be on a specific version which vary with each OTA.
And if you removed bloatware of freeze the ota will failed. that's why dtrail told you to fastboot you can be sure it will work.
And if you want ICS you have to fastboot 651.167.26 then apply the right OTA. but be ware you can't roll back to Gingerbread.
ahm ok, thank you very much to you and dtrail1
i will make this, i hope i will have luck
So i have 4 XT910S phones. I wanted to put a EU or US firmware on them so they were no longer branded and didnt have all these apps on them.
So here is what I did.
downloaded 4.0.4 CN firmware (unbranded)
Rooted and backed up CDROM file and CID file
Flashed the CN firmware on the XT910S
Using the BT TOOLS trick it boots up fine
Flased CID.IMG through command prompt in windows
Now when it boots it goes straight to fastboot with the error
Invalid CG OTV (CG: cdrom): Invalid SP data
Invalid CG HAB (CG: cdrom, status: 0X0056)
Invalid CG OTV (CG: cdrom)
I tried restoring my original CDROM file but it says the image is larger than the partition.
the original backup CDROM file is 217,088 KB and the one that i am finding with EVERY other firmware is 216,832 KB
I have even tried getting backups of all the CDROM files off the other phones and they are all the same size
The original firmware is 67.42.17.xt910s.skt.en.kr but I cannot find it anywhere to download
HELP
your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s
faheemakbar18 said:
your cid is no longer valid because cid version of xt910s 4.0.4 is 4 and the rom you installed has CID 5
now to bypass boot you will have to boot from bp tools or install boot menu manager after rooting, thats what i am doing
and to get throught that boot failure error
follow this
http://forum.xda-developers.com/showthread.php?p=43806194&nocache=1
thats how i recovered my xt910s
Click to expand...
Click to collapse
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).
N3401 said:
Thanks for the help. I have to ask if there is any way to get it back to normal? I need to sell these phones sadly, not for keeping and personal use. So is there any way to flash back to CID 4? I have experience with hex programming if that helps (I cannot see how C++ or pearl would do any good here).
Click to expand...
Click to collapse
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.
still he need to root and install bmm otherwise his only option to boot is bp tools
welder73 said:
Your CID isn´t changed and you can´t change it,each phone has its own CID.
Your CDT.bin was changed to 5,china boot and system are signed with secure version 5.
You shouldn´t restore your CID,because you flashed China kernel,then the phone can´t work.
Your option now is to flash EU JB with RSD Lite.Here https://dl.dropboxusercontent.com/u/42057363/RSDLite_v6.1.x.zip is RSD Lite 6.1.5 and here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB Fastboot files.
Click to expand...
Click to collapse
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.
N3401 said:
Sorry to ask just one more question. Will this get it back to normal without having to do any boot menu tricks or root? the phones are supposed to be sold and I need to make sure any idiot can use them. It is only 1 like this so if that one is a write off than so be it but just need to know.
Click to expand...
Click to collapse
I´m not sure,maybe you'll need to install BMM to boot normally.
razr xt910 problem, help required urgently.
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...
Have you tried matt's utility to restore stock ROM? See http://www.droidrzr.com/index.php/topic/764-gsm-xt910-razr-utility/
If successfully restored to stock then root using the utility, but do not install safe strap from the utility. You should then download and install the latest version of safestrap (version 3.65) and install it. See http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v365-2013-11-13/
I've read that only safestrap works correctly with cm11. So, now use safestrap to install cm11 (and gapps if you wish) in slot 2 (I've read that cm11 works best in slot 2).
Sent from my Droid RAZR Maxx (XT912, spyder) using TapaTalk.
mugheeshjaved said:
Motorolla RAZR xt910s Problem
Dear All, I bought Motorolla RAZR xt910s a week ago. I tried installing Cyanogenmod 11 KitKat after rooting and installing CWM Recovery. Rom was successfully installed but the installation of G apps failed so i rebooted it.Now it shows the Motorolla logo screen and then goes black.Also i can enter the recovery menu by 3 key combination. i tried wiping data to factory settings and clearing cache but in vain. Today i tried flashing (using RSD Lite 5.6.4) a stock rom of ICS(4.0.4) and then JB (4.1.2) downloaded from a website but it shows error ''failed 6/12 flashing cdt.bin flash failed..............etc''. I have also tried using fast boot cable/factory cable but now it is giving the error of "read/write failed, unknown error" in moto fast boot and rsd lite software. How can i solve this problem of read write failed unknown error.
Please help on urgent basis... Waiting to hear from you people soon...
Click to expand...
Click to collapse
follow the link i gave above in 2nd post
Hello,
since last weekend I'm facing a problem on my Razr XT910 where I could need some help.
Configuration of my phone when I noticed the problem:
Jelly Bean 4.1.2 rootet
Safestrap 2.6.3 installed
@ ROM Slot 1: CM 11 4.4.2 installed
When running CM 11 I noticed that I wasn't connected to GSM or 3G I only had a empty symbol for my GSM/3G connectivity. On the first I didn't care about that, cause it happens sometimes that your carrier has problems with his infrastructure. I startet wondering as my wife called me on our home phone and she's using the same carrier as myself.
So I rebooted to stock rom and whoa there I had the same problem. Then I tooked a look into my settings and there I saw, that there is no information about:
- baseband
- imei
- imei sv
- serial number
- apn
Did a search on the net and found a lot of thread containing my problem, but not one with a solution in it.
What I tried so far is:
- Factory reset on both ROM Slot 1 CM11 and Stock Rom
- Deleting and set up new ROM Slot 1 with CM11
- Unbrick using the method of HSD-Pilot (afterwards rooted and installed bmm)
- Unbrick using the RSD Lite method (afterwards rooted and installed bmm)
- Flash bp using the methods bmm (zip and flash firmware method) and fastboot
with bmm (flash firmware method) I get the following error message while flashing:
assert failed: motorola.motoflash(getprop("firmware.path"))
E: Error in /script/radio.zip (Status 7)
Flashing aborted
with bmm (install zip method) I get the following error message while flashing:
E: Error in /ext/Toolz/Radio/Radio.zip (Status 6)
Installation aborted.
using the fastboot method (fastboot flash radio radio.img) seems to work. After rebooting I see the robot with the spinning atom (blue)? a long time with the indicator below then the lying robot with read triangle is shown really short followed by the first robot with the spinning atom - seem revoking the made changes.
I also tried the following cmd before executing the flash cmd
- fastboot erase cache
Right now I think that something with the radio partition (does one exist?) is not ok. Is there a way to reformat everything or what could I do to solve this problem.
Any help? Any more information needed?
Thanks in advance
gripsterg said:
Hello,
since last weekend I'm facing a problem on my Razr XT910 where I could need some help.
Configuration of my phone when I noticed the problem:
Jelly Bean 4.1.2 rootet
Safestrap 2.6.3 installed
@ ROM Slot 1: CM 11 4.4.2 installed
When running CM 11 I noticed that I wasn't connected to GSM or 3G I only had a empty symbol for my GSM/3G connectivity. On the first I didn't care about that, cause it happens sometimes that your carrier has problems with his infrastructure. I startet wondering as my wife called me on our home phone and she's using the same carrier as myself.
So I rebooted to stock rom and whoa there I had the same problem. Then I tooked a look into my settings and there I saw, that there is no information about:
- baseband
- imei
- imei sv
- serial number
- apn
Did a search on the net and found a lot of thread containing my problem, but not one with a solution in it.
What I tried so far is:
- Factory reset on both ROM Slot 1 CM11 and Stock Rom
- Deleting and set up new ROM Slot 1 with CM11
- Unbrick using the method of HSD-Pilot (afterwards rooted and installed bmm)
- Unbrick using the RSD Lite method (afterwards rooted and installed bmm)
- Flash bp using the methods bmm (zip and flash firmware method) and fastboot
with bmm (flash firmware method) I get the following error message while flashing:
assert failed: motorola.motoflash(getprop("firmware.path"))
E: Error in /script/radio.zip (Status 7)
Flashing aborted
with bmm (install zip method) I get the following error message while flashing:
E: Error in /ext/Toolz/Radio/Radio.zip (Status 6)
Installation aborted.
using the fastboot method (fastboot flash radio radio.img) seems to work. After rebooting I see the robot with the spinning atom (blue)? a long time with the indicator below then the lying robot with read triangle is shown really short followed by the first robot with the spinning atom - seem revoking the made changes.
I also tried the following cmd before executing the flash cmd
- fastboot erase cache
Right now I think that something with the radio partition (does one exist?) is not ok. Is there a way to reformat everything or what could I do to solve this problem.
Any help? Any more information needed?
Thanks in advance
Click to expand...
Click to collapse
Have you tried a FULL FLASH of Moto JB? Flash the latest firmware with RSD Lite and and before delete the parts including "emc..." from the xml file because this would erase your whole internal storage (or make a backup on your computer). After that you will have to root, install latest SS (3.72),etc.
Gesendet von meinem XT910 mit Tapatalk
dtrail1 said:
Have you tried a FULL FLASH of Moto JB? Flash the latest firmware with RSD Lite and and before delete the parts including "emc..." from the xml file because this would erase your whole internal storage (or make a backup on your computer). After that you will have to root, install latest SS (3.72),etc.
Gesendet von meinem XT910 mit Tapatalk
Click to expand...
Click to collapse
Do you mean that I use a fastboot file from here Droid Developers - Android 4.1.2 Blur_Version.982.124.14.XT910.Retail.en.EU and flash it with RSD Lite?
If yes, that has been done alreade with no effect
no more ideas for me?
gripsterg said:
no more ideas for me?
Click to expand...
Click to collapse
I had similar issue some months ago and I got if fixed by flashing a radio.img file from an xt912 stock rom I downloaded. I edited d xml file nd deleted all other commands except d line dat contains the flash radio command. Mayb u should give it a shot
Murphyung said:
I had similar issue some months ago and I got if fixed by flashing a radio.img file from an xt912 stock rom I downloaded. I edited d xml file nd deleted all other commands except d line dat contains the flash radio command. Mayb u should give it a shot
Click to expand...
Click to collapse
Did already tried this with the fastboot method and it didn't work - see my first post quote here:
gripsterg said:
using the fastboot method (fastboot flash radio radio.img) seems to work. After rebooting I see the robot with the spinning atom (blue)? a long time with the indicator below then the lying robot with read triangle is shown really short followed by the first robot with the spinning atom - seems revoking the made changes.
Click to expand...
Click to collapse
Hey, i have the same problem. Do you have a solution for this?