Thought it'd be interesting to see what kind of performance everyone is getting with their players. Also if someone has a vastly higher score maybe we can figure out which tweaks make the largest difference.
There's a lot of different configurations out there by now and putting a numerical value to it seems like a cool idea! My score is derived from the 'full benchmark' in both quadrant and Antutu.
For those that don't have the apps, here are some market links!
Antutu Benchmark - https://play.google.com/store/apps/...1bGwsMSwxLDMsImNvbS5hbnR1dHUuQUJlbmNoTWFyayJd
Quadrant Standard Edition - https://play.google.com/store/apps/...mFzb2Z0d29ya3MucXVhZHJhbnQudWkuc3RhbmRhcmQiXQ..
Make sure to close all running apps while benchmarking. Changing your CPU governor to "performance" will also give you a better score and take the CPU governing out of the benchmark equation.
If you reply, please include the following answers -
What player do you have? 4.0/5.0/other?
Are you running gingerbread or ICS - what ROM?
What kernel?
What are you overclocked to?
What filesystem? EXT4/RFS/other
What's your best score? Antutu/quadrant
Mine is -
What player do you have? 5.0
Are you running gingerbread or ICS - what ROM? Gingerbread, don't remember the name but it's stockish
What kernel? Entropy's
What are you overclocked to? 1.5ghz
What filesystem? EXT4
What's your best score? 3860 Antutu/3286 quadrant
What's your score?
International 5.0
stock rom(root+tweaks+init.d tweaks)
rumirands rj14 kerel
overclocked to 1.5GHZ
Ext4 filesystem
Antutu 3528/Quadrant 2620
What player do you have? 5.0
Are you running gingerbread or ICS? ICS - RemICS-UX v1.2.0
What kernel? Noisyfox's Home Fix Kernel
What are you overclocked to? 1.2GHz
What filesystem? EXT4
What's your best score? Antutu: 3483
R14 kernel on 5.0 international ..chip Rom
I guess I could go to some faster file system
Sent from my YP-G70 using XDA
Android app did not insert picture in first post so I have to another post..
Sent from my GT-I9000 using XDA
Also what I notice is when set device to GT-I9100 I then have higher gpy scores.. 100 more but lower cpy scores because it stays on 1200 mhz..I guess it has something to do with tegrac overclock.
Device: u.s. 4.0
Ext4, tweaks
Oc 1200mhz internal voltage 1400 core voltage 1190
Quadrant:2450
Antutu:3400
Sent from my GT-I9000 using xda app-developers app
Device: US 4.0 with terrasilent kernel and my icy fusion rom. Ext4 and stock 1Ghz. My highest quadrant is 2482.
Sent using Tapatalk
I just retested mine setting the CPU governor to performance and it vastly improved my scores. I have my on-demand governor set to be super responsive but I guess it doesn't jive with the benchmarking too well. It improved one of my scores by almost 1000 points though
Thanks to everyone who's replied so far! Looks like everyone for the most part is at least in the same ballpark.
Also added market links for people who don't have the apps yet. :good:
INTL 4.0 @1,3 Ghz, ext4
Kernel: Terrasilent 1.3.5
ROM: Etherealrom
Quadrant: 2630
its my quadrant score on 1.2 Ghz and sio scheduler, own ROM i might release unto future.
Sent from my GT-I9000 using xda app-developers app
Quadrant: 2450
Antutu: 3720
GSP 5.0 U.S.
Eryigit 2.3.6 rom
With entropy kernel
Over clocked with tegrak at 1.56 Ghz at max voltages
Sent from my YP-G70 using xda premium
I will vary from day to day, but on a good day I can get over 2800 on Quadrant. I just ran Antutu with it plugged into my pc, and I got 3724. I will add a breakdown of each score below.
Kernel:Terrasilent V1.3.5
Filesystem: EXT4 with a LOT of extra mount options
Rom: EtherealRom V2.2 (as yet to be released)
OC: 1.5GHZ with smartassV2 (stable, but with insane overvolting)
I/O governor: VR
Antutu: 3724
CPU:1153
GPU:1440
RAM:502
I/O:628
Quadrant (randomly run): 2773
CPU:2021
Mem:1692
I/O:7315
2D:467
3D:2368
NOTE: my player has been a little wonky due to last-minute bugs, and I am probably getting a lower score than I should.
Help!
Ok, now how the hell do you guys score such high points on your Quadrant?!
I am currently running getting about 1,400 to 1,500 on my SGP 5.0.
Specs:
OS: 2.3.5 Gingerbread (Original ROM so far)
Kernel: 2.6.35.7 (Original Kernel)
Overclock: Tegrak Overclock to 1.5ghz
256MB RAM Swapper
Seeder lag reduction on "Moderate" mode.
I/O: Deadline.
All the rest remains untouched.
My detailed scores:
CPU: 2,043
Mem: 1,654
I/O: 913
2D: 467
3D: 2,098
Can anyone give me a light here?
When I was runny icy fusion I got about 2000 in quadrant. When I was running ethereal I got 2200 @ 1.0ghz and 2536 @ 1.2ghz
Sent from my YP-G1 using xda app-developers app
Samsung galaxy player 3.6
Stock - gingerbread 2.3.6 XXMA1
Stock - linux 2.6.35 XXMA1
no overclock
filesystem : EXT4
Antutu 4203
Player : 5.0
Rom: CM10.1
Kernel: 3.0 kernel coming with rom
Overclock:1.2 ghz
File system: ?
Score: AnTuTu: 4506 Quadrent: 1285
Antutu is 4506 and quadrent is 1285.... weird :/
nhara421 said:
Player : 5.0
Rom: CM10.1
Kernel: 3.0 kernel coming with rom
Overclock:1.2 ghz
File system: ?
Score: AnTuTu: 4506 Quadrent: 1285
Antutu is 4506 and quadrent is 1285.... weird :/
Click to expand...
Click to collapse
The scoring is different for each benchmarker. Also antutu changed their scoring this year as well.
Sent from my YP-G70 using xda app-developers app
hanjosep said:
The scoring is different for each benchmarker. Also antutu changed their scoring this year as well.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
oh okay
on CM 10.1 last alpha build (1000 mhz) quadrant showed me only 1153
oh no! what now?
tbh it is the smoothest and best performing rom and kernel out of there. Games work better than on 1,5ghz 2.xx.x kernel
It is just a bench
Send from sg wifi5.0 with mine kernel
Related
Could anybody owning a P500 run and post the results of the P500 in Neocore benchmark? I could not find it anywhere.
Thanks.
Standard kernel 44fps w/o touch display, but 15fps with touch.
OC kernel 748mhz 55fps / 24fps.
There display driver issue.
Sent from my LG-P500 using Tapatalk
Where canI get OC kernel?
Sent from my LG-P500 using XDA App
Development section, drellisdee created and uploaded oc kernel
Sent from my LG-P500 using Tapatalk
I flashed my P500 with CyanogenMod7 Mik_os and OC with setCPU on 245/806 Mhz and its stable and i get 59 fps and with touch 45!!! O.O
This is the best phone EVER!!! It runs Heavy Gunner 3d smooth now! framerate drop ocassionaly tho, but before flash it was bearly playable!!! ;D
this is at oc 787
smartassv2 governor
best i have got is 56fps
at 806oc
with min/max governor
at 480/600 mhz, this is what i get for each governor:
min/max: 56.5
scary: 56.1
smartassv2: 56.5
savagedzen: 55.8
interactivex: 55.6
ondemand: 54.9
performance: 56.5
sweetnsour said:
at 480/600 mhz, this is what i get for each governor:
min/max: 56.5
scary: 56.1
smartassv2: 56.5
savagedzen: 55.8
interactivex: 55.6
ondemand: 54.9
performance: 56.5
Click to expand...
Click to collapse
woah high scores u have there
and 55 on interactivex?
ur using megatron?
viv_jen said:
woah high scores u have there
and 55 on interactivex?
ur using megatron?
Click to expand...
Click to collapse
nope. i am using andy's phoenix rom, which in my opinion is the best rom out here performance-wise
The best Neocore scores are available with mik 6.6.1 ROM and crosses 70.0 and may reach 74-75 with smartass governor. With mik 6.5.7 and fserve .v19.4-gbs.v18a-cfs, I get around 62. IMHO mik 6.5.7 and fserve .v19.4-gbs.v18a-cfs are the best available ROM and Kernel for P500 in terms of battery life, performance and stability.
mik_os CM7 v6.6.1 @ 480/729 - smartassv2
latest franco's kernel
with sound:
- normal: 60.1
- touching: 43.6
without sound:
- normal: 63.8
- touching: 54.8
I really wanted to test Andy's latest ROM, but seems some more bugs have to be fixed. I will try it once it's bug free. As of now miks 6.5.7 is totally bug free, stable and powerful with fserve gbs kernel. The scores I get are with 480/768 smartass. Battery life is AWESOME! Goes on for more than 2 full days with moderate usage!
My best result is 76fps on mik's cm7 6.6.1 with franco's. 35 kernel
Oc'ed at 480 min 730 max @ smartass.
Sent from my LG-P500 using XDA App
hey, i overclocked to 806mhz using PaoloM70's OC Gingerbread kernel and my phone crashes very often... i'm using stock GB rom... even if i use 745 or 768 it chashes within a few hours... please help me.. should i install franco.kernel or use some different kernel for smoot functioning of my o1.. ??
umangleekha said:
hey, i overclocked to 806mhz using PaoloM70's OC Gingerbread kernel and my phone crashes very often... i'm using stock GB rom... even if i use 745 or 768 it chashes within a few hours... please help me.. should i install franco.kernel or use some different kernel for smoot functioning of my o1.. ??
Click to expand...
Click to collapse
The only thing u can do is use lower frequencies.
Sent from my LG-P500 using XDA App
Franco.kernel
Sent from my LG-P500 using xda premium
How much you can over-clock really depends from device from device. Some O1s are lucky and can OC to 806 but some never make it pass 729. Give Franco a try (its an awesome kernel regardless) but if it doesn't work it probably just mean that your phone can't OC to 806 (like mine) and just stick with something at a lower frequency.
If you install setcpu then it comes with a stress test. Use it to find out which frequency is the most stable for you.
what about governers ? if I use smartass it crashes while playing games.. and with ondemand, it feels stable.
Hey All,
I have installed Foxhound ROM for ICS and loaded the Siyah Kernal.. The ROM itself is great, I have also overclocked the CPU to 1.7Ghz, But i see some battery warming issues. I have installed NStools as well.
Any recommendations what under volting can i use with this config?
mateenf said:
Hey All,
I have installed Foxhound ROM for ICS and loaded the Siyah Kernal.. The ROM itself is great, I have also overclocked the CPU to 1.7Ghz, But i see some battery warming issues. I have installed NStools as well.
Any recommendations what under volting can i use with this config?
Click to expand...
Click to collapse
Why overclock,do u experience any difference in speed in daily use,except in benchmark..
Btw an app is installed with siyah called STweaks,it controls all kernel features.read first page post 4-5 by droidphile,excellent guide
zodiaxe66 said:
Why overclock,do u experience any difference in speed in daily use,except in benchmark..
Btw an app is installed with siyah called STweaks,it controls all kernel features.read first page post 4-5 by droidphile,excellent guide
Click to expand...
Click to collapse
Yes I have observed changed after overclocking.. The s3 boots up way faster plus for gaming it showed me real difference specially playing real racing 2 with 1.4 and 1.7..Now I only need to undervolt correctly so I can save on my batter life.. Can we set a custom voltage for 1.7 below stock values??
Sent from my GT-I9300 using xda app-developers app
mateenf said:
Yes I have observed changed after overclocking.. The s3 boots up way faster plus for gaming it showed me real difference specially playing real racing 2 with 1.4 and 1.7..Now I only need to undervolt correctly so I can save on my batter life.. Can we set a custom voltage for 1.7 below stock values??
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
stock voltage for 1.7 ghz is 1400mv, try undervolting by -50mv to -100mv and stick with one which is stable
use setcpu
keep changing it down in increments of 12.5mv and do the strees test keep doing that till u find a value that works
ps once u've done that let's us know what it is.
1088mv for 1200mHz that's the top freq I use so I never played with the voltages for the freq above it.
Hope this helps
remember thanks if it did
Sent from my GT-I9300 using xda premium
---------- Post added at 02:58 PM ---------- Previous post was at 02:01 PM ----------
k did the testing for ya
on MY DEVICE (Every device slightly diff)
1704MHz voltage 1288mv (put in 1290mv it will round it down)
if that don't work or is not stable for u then the next step up is to 1300mv .
775 mv for 100MHz .
hope this helps and if it did thanks is only 1 click away.
Sent from my GT-I9300 using xda premium
bala_gamer said:
stock voltage for 1.7 ghz is 1400mv, try undervolting by -50mv to -100mv and stick with one which is stable
Click to expand...
Click to collapse
Thanks Bala, Stressing the phone to -50mv at the moment.. Have you tried at -100mv? whats the result so far?
Also when charging I observe my phone warming a little.. Is that good?
Hey everyone. I want to start this thread to discuss our quadrant benchmark results. Firstly name your total score, what rom u r using, what kernel, your cpu governer, the cpu max and min frequencies and any other mods or scripts used.
SCORE: 1640
ROM: ICS Sunday Final by Judasa
Kernel: Ketut kumajayas kernel.
CPU GOVERNER: Smartass
CPU FREQUENCIES: Min.122 Max.864
SCRIPTS: Slaidfast mod v3 and turbo boost 8.5.
This will hopefully help out other users on how to get a fast phone
Sent from my GT-S5830 using xda app-developers app
rawnyrom said:
hey everyone. I want to start this thread to discuss our quadrant benchmark results. Firstly name your total score, what rom u r using, what kernel, your cpu governer, the cpu max and min frequencies and any other mods or scripts used.
Score: 1640
rom: Ics sunday final by judasa
kernel: Ketut kumajayas kernel.
Cpu governer: Smartass
cpu frequencies: Min.122 max.864
scripts: Slaidfast mod v3 and turbo boost 8.5.
This will hopefully help out other users on how to get a fast phone
Sent from my gt-s5830 using xda app-developers app
Click to expand...
Click to collapse
quadrant = irelevant
canibus13 said:
quadrant = irelevant
Click to expand...
Click to collapse
Why?
Sent from my GT-S5830 using xda app-developers app
RawnyRom said:
Why?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
The quadrant score doesnt really mean anything...The score never comes exactly the same the next time you check...you can get a little up or down the mark of you previous scores depending how your devices is performing at the moment...
From me:
Hello, this it thread of the Mercurius kernel dedicated for Player wifi 5.0, for jellybean roms.
I took name from greek god of speed
The aim is to provide a daily kernel which also will be a speed demon whenever you would like to(for gaming etc.).
Please do not ask any questions that are aswered here, also keep that topic clean. Please report feedback. But you can write anything his as soon as your post is connected to kernel
Click to expand...
Click to collapse
FEATURES:
401 ram available
lowered minimum brightness
03 optimization
L0 step is 1520mhz cpu with 250mhz gpu&bus
L1 step is 1320mhz cpu with 220mhz gpu&bus
L2 step is 1096mhz cpu with 219,2mhz gpu&bus
100mhz frequency removed (was useless)
battery pooling - 60sec
touchscreen responsivness tweaked
SIO and smartassv2 as default
Screen and cpu UV
Instead of killing the largest available task, kill the task closest in size to the amount of memory we actually need to free to satisfy the minfree threshold
Improve the performance of memcpy and memmove
ALSO CHECK CHANGELOG TO SEE MORE FEATURES​
HUGE thanks to mevordel, for everything, setting up ssh server and letting me use it, his knowledge and base. I only added some features. He is the guy. Also to other developers.
Press thanks button if you use, I am curious of how many ppl use it.
Odp: [Kernel][JB][YP-G70] Mercurius v1
FAQ
Q: How to install it?
A:Simply apply via CWM
Q: What does not work?
A:Everything what deos not work on cm10
Q: What is O3 optimization?
A:
Mevordel said:
O3 is a compiler flag telling it to optimize for speed. Other options include O2 and O1, which do less optimization, and Osize, which tries to generate the smallest output. In stock, the graphics drivers were compiled with Osize. He changed it to O3.
Click to expand...
Click to collapse
-Well said. Generally it improves opengl es2.0 performance significantly for me
Q: Why my phone freezes/reboots/is unstable at overclocked frequencies?
A:Overclocking is not a obligatory feature. If you find any of frequencies unstable, then please install voltage control from market and mess up with voltages. Also wirte in the topic to hel me make kernel that will work for as many users as possible.
Odp: [Kernel][JB][YP-G70] Mercurius v1
CHANGELOG
22.01.2013 - Mercurius v2
*1,32ghz overclock changed to 1,52ghz with 250mhz gpu&bus
*smartassv2 values changed - less jumpy, more battery life
25.01.2013 - Mercurius v3
*screen UV -0,4V
*100mhz frequency fixed
*cpu UV
*smartassv2 again
*other quite important fixes (ext4, moire, etc)
25.01.2013 - Mercurius v4
*100mhz frequency removed
*1320mhz frequency added
25.01.2013 - Mercurius v5
*using multiple windows for video rendering as overlay. They are used in calculation of FIMD reserved memory
*Transition latency 10000
*prevent mem corruption after i2c timeout
*WiFi adjustments
*Instead of killing the largest available task, kill the task closest in size to the amount of memory we actually need to free to satisfy the minfree threshold.
*Improve the performance of memcpy and memmove
*401mb of RAM available
*Disabled kernel debugs
*updated SIO
*Changed value of dirty_writeback_interval
*fsync disabled
I can probably make some graphics for the OP sometime this week if you like.
Odp: [Kernel][JB][YP-G70] Mercurius v1
well for sure, you have higher skill than me as I saw maybe somthing with mercury's shoes?
I would be grateful
Send from sg wifi5.0 with mine kernel
How is this different from Mevordel's one in CM10? I thought you were working on that.
alanwyl said:
How is this different from Mevordel's one in CM10? I thought you were working on that.
Click to expand...
Click to collapse
look at the features
more ram, o3 optimization and lowered minimum brightness. Only those for now.
Yup, I am still doing it but I have just created separated topic to make it clearer.
KOala888 said:
look at the features
more ram, o3 optimization and lowered minimum brightness. Only those for now.
Yup, I am still doing it but I have just created separated topic to make it clearer.
Click to expand...
Click to collapse
I see.
Any plan for 3.0?
alanwyl said:
I see.
Any plan for 3.0?
Click to expand...
Click to collapse
Don't count on me I am more like copy&paste modder, not developer. I am just learning.
I can only improve existing kernel.
Re: [Kernel][JB][YP-G70] Mercurius v1
This maybe a stupid question and i know you stated it in yiur 1st post but I just install this kernel through cwm?
sent from my Samsung Galaxy Player 5.0 U.S. running CM10 using xda app-developers app
nightfire37 said:
This maybe a stupid question and i know you stated it in yiur 1st post but I just install this kernel through cwm?
sent from my Samsung Galaxy Player 5.0 U.S. running CM10 using xda app-developers app
Click to expand...
Click to collapse
Yup, that is all
any chance of the 1520MHz overclock (from one of the JB nightlies) in the future?
Skeledr0id said:
any chance of the 1520MHz overclock (from one of the JB nightlies) in the future?
Click to expand...
Click to collapse
yup, maybe it is possible in future. Like today evening I will try
But as for now 1320 is even faster than previous 1,5 :>
Re: [Kernel][JB][YP-G70] Mercurius v1
KOala888 said:
yup, maybe it is possible in future. Like today evening I will try
But as for now 1320 is even faster than previous 1,5 :>
Click to expand...
Click to collapse
That is not posibile off course..on 1.5 score is 5200
Sent from my Nexus 7 using xda app-developers app
Re: [Kernel][JB][YP-G70] Mercurius v1
Great job. Works great so far. Also I have to ask, are you polish? I'm horrible with other languages.
Sent from my YP-G70 using xda app-developers app
KOala888 said:
yup, maybe it is possible in future. Like today evening I will try
But as for now 1320 is even faster than previous 1,5 :>
Click to expand...
Click to collapse
I think is not stable enought, this is because you get worst results.
I found less freeze (almost none) for my overclocks over 1.2GHz but much more launcher redraws, app crash, slow and laggy UI .Don't ask me why this happen :laugh:.
Under 1.2GHz if I mess with voltages (even a bit) I got 100% a freeze.
Odp: [Kernel][JB][YP-G70] Mercurius v1
DZonikg said:
That is not posibile off course..on 1.5 score is 5200
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
well that is only benchmark. I find opengl es2.0 really smoother when enabled O3 For me nfsmw runs smoother here on 1,3ghz.
damnyouwaffles said:
Great job. Works great so far. Also I have to ask, are you polish? I'm horrible with other languages.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Yup, 3city.
zardak said:
I think is not stable enought, this is because you get worst results.
I found less freeze (almost none) for my overclocks over 1.2GHz but much more launcher redraws, app crash, slow and laggy UI .Don't ask me why this happen :laugh:.
Under 1.2GHz if I mess with voltages (even a bit) I got 100% a freeze.
Click to expand...
Click to collapse
Sorry but it is pretty hard to understand what do you mean
Overclock is not obligatory. Not every device can handle it. But of you will precisely write about your problem it can help me to make oc work on more devices including yours.
Send from sg wifi5.0 with mine kernel
Re: [Kernel][JB][YP-G70] Mercurius v1
KOala888 said:
well that is only benchmark. I find opengl es2.0 really smoother when enabled O3 For me nfsmw runs smoother here on 1,3ghz.
Click to expand...
Click to collapse
What is O3 ,run antutu 3d rating benchmark and tell me the score..its es2.0 test
Sent from my Nexus 7 using xda app-developers app
i asked because i've literally been using the 1520MHz capable nightly since the day it was released with absolutely no problems ever. none. my galaxy player is phenomenal now aside from having to use speakerphone for calls now.
DZonikg said:
What is O3 ,run antutu 3d rating benchmark and tell me the score..its es2.0 test
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
O3 is a compiler flag telling it to optimize for speed. Other options include O2 and O1, which do less optimization, and Osize, which tries to generate the smallest output. In stock, the graphics drivers were compiled with Osize. He changed it to O3.
And he attached a screenshot of a 3D benchmark.