Dear friends,
I have SGS3 with stock ROM and not rooted it yet.
Other devices can browse the net thru my router; but not my SGS3.
It's also configured as DHCP server.
Please help me; and please asked for any missing information.
tia,
Bram
Are you sure you're fully connected to the WiFI?
Check the information in Settings->Wi-FI (and click your access point).
It should say Status Connected, and show a proper IP address at the end.
Problem solved....
Hi saigai,
thanks for replying.
I found out that it was my bad....
the other end of the LAN cable was bad.
thanks anyway...
Problem solved
PS: Dear mods, please close the thread... thank you
Related
Hey Guys,
I'm running WM5, 1.50g for more than a week now.
Its simply wonderful.
there are some compatibiltiy issues witih the S/Ws now; but that'll be there. we were able to use this OS before the release thats the big thing.
I'm looking for two piece of info here.
1> Wireless USB modem is not working - does anyone have any idea? inputs on this? (i didnt try to mix this topic with non-woking buttons; hope thats okay and we can close the topic as soon as its resolved)
2> I'm on 1.50g now and able to use large amount of storage mem. I was running 1.60a earlier and cud not use large mem (just about 14M for storage) where I had to store all my email data and the loaded S/Ws. due to the space crunch; I had to come back to 1.50g.
As the 1.60a is faster (i heard so - cud not test and fall back to 1.50g imm.) and i'd like to go for that. Does anyone has got any idea how to make use of the 120MB memory in 1.60a to be used for my email storage and to be able to load S/Ws and data on it?
Thanks in advace.
Wireless USB modem on WM5
hey guys,
just reviewing whether anyone has contributed!
I saw another thread "Warning WM5 1.60a and Extended _rom" and I think, I can get around a way on how to make use of that 120mb program memory in 1.60a and i'll definitely going to try that once I hv the steps with me.
as regards the Wireless USB Modem; I think i'm the only person who's facing this issue or may be fewer ppl. if anyone's using I-mate PPC phone with WM5 with working application (wireless USB modem) please share ur configuration with me.
thanks.
Updating the topic to expand the audiance and expacting at least one response
:lol:
I am also having a problem with the USB Modem... It says "com open error (8)"
hello Duan,
have u found any resolution yet?
Nope... And after searching around the net I still have had no success.
Hey Guys,
I'm switching back to the WM2K3 SE now. I think its high time; we do not have any idea about the USB modem functionalities that's most important while we use the device as a modem while away from home or office.
I was okay with Camera, Record and all other facilities not available. I'm not in for all those flashy features but I have to have my Voice and Data connectivity inplace thats more than important for me anytime.
So, Guys; please please let me know once we have a solution for the Wireless USB / BT modem.
Thanks.
Wireless Modem on WM5
Went back to the 1.60b now coz i thought I have now got the BT adapter / dongle.
However, I'm not able to use the BT wireless modem with the adapter itself.
as I said.. as soon as i start the wireless modem application the signal indicator doesnt show the cross mark on it and continue show the signal strength. otherwise I think my lappy is able to detect the phone and everything works fine except the modem application.
I downgraded to a couple of versions of SE now (I have now forgotten how many times I flashed my device - guys let me know if its harmful to flash the device multiple times - now a days its about almost everyday I flash my device, thanks to my exch servr that hold my data). I tried 2.20SE I also tried the latest one thats been converted to english by Buzz and tried to start the BT modem application - no luck - same symptoms.
and again I flashed my device with 1.60b (along with the DCR ). However, the BT modem or USB modem issue is not resolved.
I'd really appreciate if someone can help me with the Modem application PLEAZEEE - PLEAZEE.
THANKS A LOT IN ADVANCE --
Yeah forgot to tell ya - I'm using iMate Pocket PC Phone Edition.
Guys, please try this configuration on WM5 as bluetooth modem, remove any connection on 'My Isp', start wireless modem application & dial...
FYI, I use 1.06b rom & billionton usb dongle. Btw I can't determine which modem type it use (cell line / gprs / etc.).
COM OPEN ERROR!! WM5
Has anyone solved the COM OPEN ERROR on the WM5 phone devices.. Desperately trying to setup the so called USB wireless modem for my laptop...
Its driving me crazy!!
Any help gratefully received!
Re: COM OPEN ERROR!! WM5
timroutledge said:
Has anyone solved the COM OPEN ERROR on the WM5 phone devices.. Desperately trying to setup the so called USB wireless modem for my laptop...
Its driving me crazy!!
Any help gratefully received!
Click to expand...
Click to collapse
while i have not gotten the wireless modem to work, i have successfully started and seen the connection icon turn yellow. having written that, i started getting the "com open error" after adding com ports under bluetooth set-up. deleting those ports under bluetooth eliminated the error for usb in wireless modem application.
separately, in order to see the modem in my phone & modem control panel, i had to press start in wireless modem prior to tethering the device to my thinkpad.
btw, i am running wm5 on a ppc6700 (cdma/ev-do version of the htc apache, i believe.)
kp
First of all, i would like to say hello guys and thanks to every developer in here.
I'm trying to change my x10 (FreeX10 from here) mac address, but i've tried a lot of commands like:
ip link wlan0 set address xx:xx:...
most of them just returns me invalid operation or siocsifhwaddr error
i've tried the app Set Mac Address with no luck.
Tried to find the /etc/wl/nvram.txt there is no file in there.
Tried to look for a file with any WL inside, most of them seems code not configuration.
Have someone already been able to change this?
I need this because in my work everyone can have only on mac address signed to, so if i want to use wifi i need to set every thing to the same mac address.
Sorry my bad english.
Thanks in advance
Ruan
Maybe you will find something useful here!
G-FACE said:
Maybe you will find something useful (Couldn't post the link because of forum rules blocking me)
Click to expand...
Click to collapse
It may be because of my lack of knowledge on linux system, but i couldn't understand most of the commands in there, tried to reproduce but i got nothing.
Does anyone knows any step by step for x10 using terminal commands if possible to do this?
Would anyone know why a ROM would not produce the correct mac adress and just leave it as blank? Because if you do not have a Mac Adress you cannot connect to any wifi network... any help would be appreciated :laugh:
A did a quick google search and found this
http://forum.xda-developers.com/showthread.php?t=2121151
another thread said something about the kernel flashed to many times, but I doubt that is the case.
hi to all, i'm a newbie on this forum, and i know this may not be the right place for this 3d, but i don't have enogh messages to write on developer topic.
I've a strange behaviour on my galaxy S advance.
I've installed Harhjely 3.2 with cocore 8.2 and CWM, with HJ 3.0 all works fine, i've upgraded to 3.2 but tethering is not more working.
Doesn't work neither wi-fi and bluetooth tethering.
I found the problem but i don't know how to fix it.
essentially the problem is on the dhcp server,
I'm able to see wi-fi connection from different devices to my phone, i can see on the tethering table the mac address of my pc and the ip address reserved to it, but the pc doesn't acquire the address and after a lttle it assigns itself an ip from PIPA netwoek (169.254.0.0/16 ) and so is not able to use the phone to go to internet.
I tried different devices (many laptop with different OS, tablet and others phones), but no luck, dhcp server is not working properly.
Any idea how to fix it ?
still not working
i tried to update to 4.0 version of harshjelly, but no luck, tethering is still not working.
i put here a log taken with logextreme during tethering process (device is able to connect, phone seems able to give it an ip address, but no one ip address is released), so please if any of you is able to give me an hand i'll be extremely gratefull.
Tethering is crucial for me, if i'm not able to make it working, i need to revert to stock image that i hate, but tethering works...
Please help me:
many thanks
kasparh said:
i tried to update to 4.0 version of harshjelly, but no luck, tethering is still not working.
i put here a log taken with logextreme during tethering process (device is able to connect, phone seems able to give it an ip address, but no one ip address is released), so please if any of you is able to give me an hand i'll be extremely gratefull.
Tethering is crucial for me, if i'm not able to make it working, i need to revert to stock image that i hate, but tethering works...
Please help me:
many thanks
Click to expand...
Click to collapse
ok, i solved the issue, i flashed from scratch and re-installed, now all works like a charm.
thanks for the help
Hi everyone!
im just new here.
I would like to ask for your help about an app called Http Injector. we use this in our country (Philippines)
to access internet via vpn for free.
to use this app, you have to register to sites that offers free ssh acount such as createssh.com, then create a payload (which has to be a freesite from our isp) and a remote proxy. then we you are connected, you can create a config file ( with an extention ".ehi") and share it to others.
the problem is, some .ehi files that is being shared are locked to prevent others to copy their config.
I hope you can help me sniff through these locked .ehi files guys...
thanks and more power.
bugz88 said:
Hi everyone!
im just new here.
I would like to ask for your help about an app called Http Injector. we use this in our country (Philippines)
to access internet via vpn for free.
to use this app, you have to register to sites that offers free ssh acount such as createssh.com, then create a payload (which has to be a freesite from our isp) and a remote proxy. then we you are connected, you can create a config file ( with an extention ".ehi") and share it to others.
the problem is, some .ehi files that is being shared are locked to prevent others to copy their config.
I hope you can help me sniff through these locked .ehi files guys...
thanks and more power.
Click to expand...
Click to collapse
Don't know if you still going to need this.
Install Xposed, go to Framework => Install/Update => Restart
Install Ehiopener. Open Xposed, go to modules if you already installed Ehiopener you'll see it there click it and activate than restart.
Congratz', you can sniff EHI now it wiill not help with root protected ehi.
ehi opener not compatible apps
hi Sir is there a latest version in ehi opener...i tried to install ehi opener 0.4.3 its said not compatible using the latest http injector hope there someone who can help me about this matter many thanks guyz...
Hello to all
it would be very useful if it is possible to:
When connected to WIFI, HTTP injector service stops
When connected to any mobile network and not connected to WIFI, service auto starts
also it is annoying that when rebooting phone i have to manually start the service
anyway to avoid that?
thanks