Hi
I am from India & I have a dell streak 5 with baseband version GAUSB1A135700-AWS
I was some how able to root the phone but its not showing me the option to clean the superuser data in the app option in the setting window but I did get the msg in recovery mode that my phone has been successfully rooted
& also I am not able to update using the pkg as its telling me to update via the update.zip
Do I have to use the 350 recovery method?
I am on android 2.2.2 & my kernel version is 2.6.32.9-perf & my build no. is16864
plz help
sounds like you are on stock ROM... go for custom ROM already...
deysmacro said:
sounds like you are on stock ROM... go for custom ROM already...
Click to expand...
Click to collapse
but is there a custom rom available for the 00 region users??
Edit:- Never mind I did frind a gingerStreak update by DJ_Steve but all its link seem to be dead!!
Abhishek Darekar said:
but is there a custom rom available for the 00 region users??
Edit:- Never mind I did frind a gingerStreak update by DJ_Steve but all its link seem to be dead!!
Click to expand...
Click to collapse
no worry.. custom ROM usually supports all region... well... it is custom right?
and try other custom ROM such as DSC 1.0 or longhorn 2.7
that should be enough for you... :good:
deysmacro said:
no worry.. custom ROM usually supports all region... well... it is custom right?
and try other custom ROM such as DSC 1.0 or longhorn 2.7
that should be enough for you... :good:
Click to expand...
Click to collapse
thanks I did try the longhorn 2.8 but I need the GB AMSS and DSP1 installed inorder to properly use the longhorn 2.8
If u or anyone provide the working links for them plz post it
how bout using DSC 1.0? all of the needed file is provided at dev forum there...
deysmacro said:
how bout using DSC 1.0? all of the needed file is provided at dev forum there...
Click to expand...
Click to collapse
Thanks it realy helped!!
finally got it updated
Related
guys i dont know what to do now it's 5:30 here now. i flash baseband 67 on my stock rom 2.1 but the result is unknown baseband i did out the sd card the factory reset but didnt work to me. when i try to repair using pc companion its's said theres no software upvailable please help what i need to do first? can i flash other firmware Generic version 2.1update1 build 2.0.2.A.0.24? my device before is SO-10B ntt docomo it came from japan. should i flash into SO-10B? i really need help!
EDIT: its ok now i flash 2.1_2.0.2.A.0.24 with DualTouch already.. but i have 1 question if need to flash to baseband 67 i need to custom rom? like cm6 with x10i firmware then flash baseband 67? or i can directly flash in stockrom 2.1 with x10i firwmware?
Just flash the older baseband back, the one which you were on.
P.S: Post should've been in the Q&A section
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
kozxmartt said:
There shouldn't be any problems I believe.
Flash baseband first and then the ROM.
Click to expand...
Click to collapse
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance. can i flashbaseband even im in cm6? without flashing firmware stock?
gAracUh said:
rom are need? i want to flash TripNMui iris. so after baseband what rom did you mean dude? thanks in advance.
Click to expand...
Click to collapse
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
kozxmartt said:
First you flash the baseband.
Then you flash you flash the ROM that you want to install (Wolfbreak's CM 6 or TripNMiuI, whichever one you want)
Click to expand...
Click to collapse
oh thank you again! but i can flash custom rom in xrecovery right? last question
Are we talking about a stock rom?
In any case just go back to your previous BB (the one that is supposed to work with your stock rom).
gAracUh said:
oh thank you again! but i can flash custom rom in xrecovery right? last question
Click to expand...
Click to collapse
Yes, you have to flash custom ROMs in xrecovery.
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
gAracUh said:
ouch i was late! but after i flash cm6 wolfbreak can i flash baseband 61 or baseband 67? without problem? thank you for reply dude i appreciate it!
Click to expand...
Click to collapse
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
agentJBM said:
Custom ROMs require a specific baseband used by the dev. I don't think there are any custom ROMs using the new baseband. It's only been out a couple days.
WB CM6 uses baseband 54
Click to expand...
Click to collapse
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
gAracUh said:
yes but i was late i flash in other stock firmware.. thank you too for reply!
EDIT: i falied again i flash in cm6 and flash baseband 67 but got unknown baseband again. i did crash system and factory reset. how i need to work baseband 67? or 61?
Click to expand...
Click to collapse
1.Flash Stock
2.Flash Baseband
3.Flash Rom
gAracUh said:
yes i know that already thanks! but what is for the changing only baseband in flashtool if after flash goes in unknown baseband. i think i need to flash newest firmware X10i 2.1.B.0.1 to get baseband 67.
Click to expand...
Click to collapse
If you know that, why are you trying to use a incompatible baseband with his ROM?
I find it ironic that people are using that same line over and over suddenly.
They come and ask for help then act like they know what the problem is.
Seriously i am weird ed out.
3 words i am starting to hate "Help, Please, Bootloop"
What version if Trips IRIS do you want to flash.
1.5.0 works well on baseband 67
There are a couple of files you need to patch afterwards or you may get keyboard and/or wifi issues - they are the network library and keyboard layout files. This patch was put up by cobrato but the links to them were in a thread that got deleted.
If you can't find them pm me - I should have them lying around somewhere.
Sent from my X10 TripNMiUI-IRIS using XDA App
Rom:
Version: 408
Build: 20707
Android version: 2.3.3
Build date: Dec 1, 2011
Changelog:
First official 2.3.3 pkg
Dell Stage 1.5
Swype 2.27.69.19339
Install instructions:
Recommended: make a backup of userdata with preferred method
Flash a region 14 recovery: stock 319 recovery.img
download Thunder_408_20707_14.pkg
copy update.pkg to sdcard
reboot into recovery mode
follow onscreen instructions
finished
I expect that this rom cant be rooted at all as it's likely that every known exploit has been patched. I'm going to attempt to make a pre-rooted/custom rom in the upcoming days.
so i can install this rom following the same procedure over my 2.3 olleh rom?
i.e only placing this pkg file to sd card and update it or i have to again update the system.img and this pkg file again through fastboot mode?
you need a region 14 recovery installed, use the 319 one if you're not sure.
TheManii said:
Rom:
Version: 408
Build: 20707
Android version: 2.3.3
Build date: Dec 1, 2011
I'm going to attempt to make a pre-rooted/custom rom in the upcoming days.
Click to expand...
Click to collapse
I would be willing to beta test your pre-rooted rom if you want, with 319 recovery loaded and adb working I should be able to get out of any problems.
The venue is a bit down on my priority list as I already have other things I promised to make. Also as I cant test stuff myself.
Are you comfortable using fastboot? You of course will need 408 installed for the various firmwares, feel free to actually confirm if none of the rooting tools work.
As the venue has comparatively few safety nets, everything you do of course is at your own risk.
kakagi said:
so i can install this rom following the same procedure over my 2.3 olleh rom?
i.e only placing this pkg file to sd card and update it or i have to again update the system.img and this pkg file again through fastboot mode?
Click to expand...
Click to collapse
If you using olleh rom before,you can direct upgrade,no need use recovery fastboot again
1. Download rom 407 rom, rename to update.pkg to TF card.
2. hold Vol - and vol + keep swith on the phone to upgrade
Holding off until confirmed rootable
I'm holding off until someone confirms this one is rootable.
Hi, just like to confirm that the baseband ver. remains as GTOUB1A140614-AWS？ With the new rom，only OEM ver. is updated to GTOUB1A140814，build 20707？ thanks pals
Sent from my Dell Venue using XDA App
can i flash previous rooted system.img using fastboot in this?
kakagi said:
can i flash previous rooted system.img using fastboot in this?
Click to expand...
Click to collapse
You could, but unless it's 408 based that defeats the purpose.
408 rooted
Looks like Luihui has rooted 408 for us, see his thread.
michaeljwestii said:
Looks like Luihui has rooted 408 for us, see his thread.
Click to expand...
Click to collapse
can you give me link of his thread?
Link
changkho1908 said:
can you give me link of his thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1354393
michaeljwestii said:
http://forum.xda-developers.com/showthread.php?t=1354393
Click to expand...
Click to collapse
thanks you, but i can't download "115.com/file/aqoa9e6q#
system233菜单汉化.rar" link, i am not chinese plz upload into mediafire, thank u so much
changkho1908 said:
thanks you, but i can't download "115.com/file/aqoa9e6q#
system233菜单汉化.rar" link, i am not chinese plz upload into mediafire, thank u so much
Click to expand...
Click to collapse
I don't read Chinese either, but if you watch the countdown timer in the center of the screen, when it goes away it reveals 4 tabs. The two on the right both link to the file. The one on the far right appears to be working but very slow. I will let it go for a couple of hours and see if it finishes downloading.
michaeljwestii said:
I don't read Chinese either, but if you watch the countdown timer in the center of the screen, when it goes away it reveals 4 tabs. The two on the right both link to the file. The one on the far right appears to be working but very slow. I will let it go for a couple of hours and see if it finishes downloading.
Click to expand...
Click to collapse
well, thank u once more time!! i'm downloading it now.
speed download is very slow 80kb/s
well the 408 rom is rooted now so can we except now a custom deodexed rom and a CWM
Hi Kakagi,
Its great news that 408 is rooted, will it run MMI and USSD codes or as Manii said region 14 (olleh kt) roms dont support them. Help me out I had to downgrade to Froyo to run these codes.
Thanks.
You will need to flash the 319 recovery then use the 319 pkg
I did that and I am running froyo. Both MMI & USSD codes are working. Wanted to know if any of the new GB updates support MMI & USSD codes function.
Thanks.
I had Custom ROM MIUI v 2.3.23 but when i wonted to update to version 2.3.3 so i tried. But i got an ERROR that said that the SD card could not be mounted, so i tried to reinstall the kernel. I used CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip, and when it was finished the phone restarted but it stopped on the loading screen. What should i do?
Here is a picture of the original ROM (It is in Norwegian)
z-at-ox said:
I had Custom ROM MIUI v 2.3.23 but when i wonted to update to version 2.3.3 so i tried. But i got an ERROR that said that the SD card could not be mounted, so i tried to reinstall the kernel. I used CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip, and when it was finished the phone restarted but it stopped on the loading screen. What should i do?
Here is a picture of the original ROM (It is in Norwegian)
Click to expand...
Click to collapse
do a clean install of miui (full wipe etc) , and why do you want to use the ki8 kernel?
pls thanks if i helped u.
cheers!
Is it the wrong kernel
snOwjAwk said:
do a clean install of miui (full wipe etc) , and why do you want to use the ki8 kernel?
pls thanks if i helped u.
cheers!
Click to expand...
Click to collapse
I have tried a clean install, and should I use another one? is the one I am using the wrong one?
z-at-ox said:
I have tried a clean install, and should I use another one? is the one I am using the wrong one?
Click to expand...
Click to collapse
nope it isnt but why dont you use the kernel which is installed with miui?
snOwjAwk said:
nope it isnt but why dont you use the kernel which is installed with miui?
Click to expand...
Click to collapse
Can you explame how I get the Kernel that follows whit MIUI? Do i get it when i install the ROM from Recovery mode?
snOwjAwk said:
nope it isnt but why dont you use the kernel which is installed with miui?
Click to expand...
Click to collapse
Thanks for the help, the reason that the system dident boot was that i tried to install a broken MIUI version. But thanks anywhy
z-at-ox said:
Can you explame how I get the Kernel that follows whit MIUI? Do i get it when i install the ROM from Recovery mode?
Click to expand...
Click to collapse
y you get the kernel which is included in the rom while ur flashing. reflash miui with ALL wipes and you should be fine.
cheers.
Currently running CyanogenMod 7 on my Xperia X10i but I want try out the Wolf's TW Gingerbread ROM.
Problem #1: I visited the Wolf's page but I when I try to download the ROM, it redirects me to another page. Should I download the Stock or FreeKernel Version because my Bootloader is locked?
Problem #2: I cannot download the FTF Bundle because the link takes me to a Filesonic account which I cannot access.
Problem #3: I can't seem to find the Speed&Hotfixes file
Please help!!!!!
Hi,
using this ROM (freekernel version), even I cleaned and tweaked it a lot
Dovakiin said:
Problem #1: I visited the Wolf's page but I when I try to download the ROM, it redirects me to another page. Should I download the Stock or FreeKernel Version because my Bootloader is locked?
Click to expand...
Click to collapse
Its on you - but I recommend freekernel version.
Dovakiin said:
Problem #2: I cannot download the FTF Bundle because the link takes me to a Filesonic account which I cannot access.
Click to expand...
Click to collapse
You do not need the FTF bundle with kernel and baseband if you are running 2.3.3 android with .71 baseband. If you are not, will reupload it for you.
Dovakiin said:
Problem #3: I can't seem to find the Speed&Hotfixes file
Click to expand...
Click to collapse
It seems that they are not for these ROMs,I dont have them and have the best performace I have ever seen. But maybe my own cleaning did some extra speed
Thanks mate!
Thanks for the reply
Flashed to CyanogenMod 7 so now I'm currently on 2.3.5 android and baseband .71
Does that mean that I still won't need the FTF bundle ?
Dovakiin said:
Thanks for the reply
Flashed to CyanogenMod 7 so now I'm currently on 2.3.5 android and baseband .71
Does that mean that I still won't need the FTF bundle ?
Click to expand...
Click to collapse
Yes - if cyanogenmod uses baseband .71 then you do not need to flash ftf bundle. Just simply flash the ROM itself
Thanks alot man!
Will be flashing very soon
Flashed Wolfs ROM. Experianced a great amount of lag (don't know why) so I went back to CM7-ZMOD
Sent from my X10 using XDA
Dovakiin said:
Flashed Wolfs ROM. Experianced a great amount of lag (don't know why) so I went back to CM7-ZMOD
Sent from my X10 using XDA
Click to expand...
Click to collapse
In every install of new custom ROM - you MUST do a Dalvik cache clean and mostly the full wipe. The full wipe is not necessary but recommended. After this second reboot is also recommended and taking a few minutes to settle
HeliumX10 said:
In every install of new custom ROM - you MUST do a Dalvik cache clean and mostly the full wipe. The full wipe is not necessary but recommended. After this second reboot is also recommended and taking a few minutes to settle
Click to expand...
Click to collapse
Yep. Did everything you said but still had no joy
It's okay though. CM7 feels awesome Only issue I have is with the Funny Jokes app. Lags quite often. I think Titanium Backup corrupted it's data
But no worries. I love this ROM!
FTF bundle with baseband 71 not available again...pls upload
HeliumX10 said:
Hi,
using this ROM (freekernel version), even I cleaned and tweaked it a lot
Its on you - but I recommend freekernel version.
You do not need the FTF bundle with kernel and baseband if you are running 2.3.3 android with .71 baseband. If you are not, will reupload it for you.
Click to expand...
Click to collapse
Could someone please once again make this ftf bundle available and point me to it... thanks.
hi everyone, i need you help.
can anyone give me a flashable stock rom for my dell?
any link?
i want to back to stock.
im not the first owner of this dell.
so i dont know what to do.
please help me
here is my dell streak5 info:
-kernel 2.6.35.14-DSC-Team-Phoenix
-build number MIUI - 202170
-baseband - GAUSB1A1406214 - EU
emdee07182023 said:
hi everyone, i need you help.
can anyone give me a flashable stock rom for my dell?
any link?
i want to back to stock.
im not the first owner of this dell.
so i dont know what to do.
please help me
here is my dell streak5 info:
-kernel 2.6.35.14-DSC-Team-Phoenix
-build number MIUI - 202170
-baseband - GAUSB1A1406214 - EU
Click to expand...
Click to collapse
you do know how to flash and do fastboot right? because flashing to stock requires that preliminarily...
here is the link to the official rom...
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official
you can try using 406 or 407 rom and make sure the recovery also matches with the rom...
=)
deysmacro said:
you do know how to flash and do fastboot right? because flashing to stock requires that preliminarily...
here is the link to the official rom...
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official
you can try using 406 or 407 rom and make sure the recovery also matches with the rom...
Click to expand...
Click to collapse
thank you so much for the reply.
i know how to go in fastboot, the only problem is, i think usb port is broken.
and the recovery is stock recovery, there are four options only. am i right?
last question, the 406 is .img how to flash and where? stock recovery? via install update?
and the 407 is .pkg, or this is the one that can flash in stock recovery via install update etc?
thanks! im a noob for this unit.
emdee07182023 said:
thank you so much for the reply.
i know how to go in fastboot, the only problem is, i think usb port is broken.
and the recovery is stock recovery, there are four options only. am i right?
last question, the 406 is .img how to flash and where? stock recovery? via install update?
and the 407 is .pkg, or this is the one that can flash in stock recovery via install update etc?
thanks! im a noob for this unit.
Click to expand...
Click to collapse
if the usb port is broken.. how do you charge your phone? using external battery charger? did the previous owner told you that the port was broken?
if the port is out and since you are already using GB... you can only flash custom rom such as longhorn, dsc, lxdroid....
where you just need to transfer the rom zip to the external sd card...
flashing to stock is quite impossible since you need to flash the matching stock recovery... the stock recovery is there to flash the stock rom...
all the stock rom is with .pkg
and if you said that the recovery is stock... you can only flash stock rom with that matches the number...
go into the recovery and when you select update.pkg menu... it should show you the number of the supported stock rom...
there are many digits in one line with blue (or white?) color... put it here so that we can show you which stock rom can go with the recovery...
emdee07182023 said:
hi everyone, i need you help.
can anyone give me a flashable stock rom for my dell?
any link?
i want to back to stock.
im not the first owner of this dell.
so i dont know what to do.
please help me
here is my dell streak5 info:
-kernel 2.6.35.14-DSC-Team-Phoenix
-build number MIUI - 202170
-baseband - GAUSB1A1406214 - EU
Click to expand...
Click to collapse
why you want to restock your DS ROM? stock rom have so many bugs! even the new Olleh 407. just go with _n0p_ newest DSC custom ROM, its bug free.. search _n0p_ thread on development site.