Ok. I installed the rom on my phone and booted it up normally but during install the wifi didnt turn on so i rebooted into recovery.
I tried to wipe and install from a backup but it just saus cant mount /emmc and now i cant access anything from my.internal sd card where everything is.
I have tried all format an moumt options but all errors. Wht do i do?
I dont have a cable for odin but can order one....
Sent from my GT-S5830 using XDA
Its not bricked
Use flash using sdcard or internal sdcard.
If somehow you erased your external card than copy the file using computer, or buy a USB cable and flash using Odin.
atifsh said:
Its not bricked
Use flash using sdcard or internal sdcard.
If somehow you erased your external card than copy the file using computer, or buy a USB cable and flash using Odin.
Click to expand...
Click to collapse
So if i download a rom onto the sd card of my samsung galaxy ace will and transfe i over will i be able to flash it even though the /system and /data files just show erors?
Sent from my GT-S5830 using XDA
sensation lover said:
So if i download a rom onto the sd card of my samsung galaxy ace will and transfe i over will i be able to flash it even though the /system and /data files just show erors?
It seems as if the entire internals card is dea but external i ok
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Sent from my GT-S5830 using XDA
sensation lover said:
So if i download a rom onto the sd card of my samsung galaxy ace will and transfe i over will i be able to flash it even though the /system and /data files just show erors?
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
If you have cwm, yes copying a cwm zip file/ROM will be flashed, if the file is not corrupt.
If you are on stock recovery you have to flash using Odin.
Don't worry man....you need a cable to do this:
1. You need to download this http://hotfile.com/dl/146321681/7a0247f/I9100XXKL1_I9100OXAKL1_OXA.zip.html
2. Go in DOWNLOAD MODE
3. In odin CODE_I9100 goes in PDA GT-I9100-CSC-Multi goes in CSC and MODEM_I9100 goes in Phone the .pit file goes in PIT
4. Hit start...
5. Soft Brick is gone....ENJOY:good:
6. Now you can flash your previous ROM, the one before you Brick
PRESS TNX BUTTON IF I HELP YOU :good:
Tuqano said:
Don't worry man....you need a cable to do this:
1. You need to download this http://hotfile.com/dl/146321681/7a0247f/I9100XXKL1_I9100OXAKL1_OXA.zip.html
2. Go in DOWNLOAD MODE
3. In odin CODE_I9100 goes in PDA GT-I9100-CSC-Multi goes in CSC and MODEM_I9100 goes in Phone the .pit file goes in PIT
4. Hit start...
5. Soft Brick is gone....ENJOY:good:
6. Now you can flash your previous ROM, the one before you Brick
PRESS TNX BUTTON IF I HELP YOU :good:
Click to expand...
Click to collapse
hmm, I put them all in the right place and ran the program but it just said checking md5 sums and files are valid.... then nothing. Waited for about 10 minutes and absolutely nothing. I didn't touch ANYTHING else so what else do I need to do? The phone is in odin mode and plugged in ( found an old Galaxy ace cable which fits) but nothing is happening.
sensation lover said:
hmm, I put them all in the right place and ran the program but it just said checking md5 sums and files are valid.... then nothing. Waited for about 10 minutes and absolutely nothing. I didn't touch ANYTHING else so what else do I need to do? The phone is in odin mode and plugged in ( found an old Galaxy ace cable which fits) but nothing is happening.
Click to expand...
Click to collapse
Click Re-partition in Odin....and make the same procedure....Let me know if it works
Mate I know the thread you got the ROM and there was a lot of talk about bricking your device. In the FAQ section in the second post it told you the exact method that the person above me quoted to you. Do some reading first before posting!
Sent from my GT-I9100 using Tapatalk 2
Just so you know, wifi doesn't work for now. A bit of reading wouldn't hurt
I'm sorry, I was just panicking a bit :crying:
Ok what happens is that it checks that all are valid, and it says they all are. Then it says Checked MD5 finished successfully and then after that leave cs. It doesn't work, what should I do?
Edit: I notice from videos that people get 0 : [COM12(or 11)] but mine never shows this?
sensation lover said:
I'm sorry, I was just panicking a bit :crying:
Ok what happens is that it checks that all are valid, and it says they all are. Then it says Checked MD5 finished successfully and then after that leave cs. It doesn't work, what should I do?
Edit: are there any certain drivers I need for this?
Click to expand...
Click to collapse
Had you yet used ODIN?
Regarding the drivers, if you have installed Samsung Kies you don't need them....
---------- Post added at 02:36 PM ---------- Previous post was at 02:27 PM ----------
sensation lover said:
Edit: I notice from videos that people get 0 : [COM12(or 11)] but mine never shows this?
Click to expand...
Click to collapse
This means you need drives 'couse ODIN doesn't recognize your phone!! Do you have Samsung Kies installed on the PC?? If not, download the drivers here:
http://hotfile.com/dl/149291593/1648d09/SAMSUNG_USB_Driver_for_Mobile_Phones.rar.html
PRESS TNX BUTTON IF I HELP YOU :good:
Ok I ran ODIN and it rebooted and then it says:
Can't mount /system
/cache
/data
It says it for EVERYTHING and I can't access internal storage... only external. I got a rom onto it but it says formatiing system and fails and so aborts.
sensation lover said:
Ok I ran ODIN and it rebooted and then it says:
Can't mount /system
/cache
/data
It says it for EVERYTHING and I can't access internal storage... only external. I got a rom onto it but it says formatiing system and fails and so aborts.
Click to expand...
Click to collapse
ok...can you go into DOWNLOAD MODE? if yes you must to RE-do all my procedure...I did this procedure 2 times to un-brick my phone...remember to select Re-Partition in ODIN
1. You need to download this http://hotfile.com/dl/146321681/7a0247f/I9100XXKL1_I9100OXAKL1_OXA.zip.html
2. Go in DOWNLOAD MODE
3. In odin CODE_I9100 goes in PDA GT-I9100-CSC-Multi goes in CSC and MODEM_I9100 goes in Phone the .pit file goes in PIT
4. Hit start...
5. Soft Brick is gone....ENJOY:good:
6. Now you can flash your previous ROM, the one before you Brick
PRESS TNX BUTTON IF I HELP YOU :good:
Tuqano said:
ok...can you go into DOWNLOAD MODE? if yes you must to do all my procedure....
1. You need to download this http://hotfile.com/dl/146321681/7a0247f/I9100XXKL1_I9100OXAKL1_OXA.zip.html
2. Go in DOWNLOAD MODE
3. In odin CODE_I9100 goes in PDA GT-I9100-CSC-Multi goes in CSC and MODEM_I9100 goes in Phone the .pit file goes in PIT
4. Hit start...
5. Soft Brick is gone....ENJOY:good:
6. Now you can flash your previous ROM, the one before you Brick
PRESS TNX BUTTON IF I HELP YOU :good:
Click to expand...
Click to collapse
Yes i can. I had already run the procedures and it all worked just when I rebooted the same problems. It seems as if the internal card is locked or dead
Sent from my GT-S5830 using XDA
sensation lover said:
Yes i can. I had already run the procedures and it all worked just when I rebooted the same problems. It seems as if the internal card is locked or dead
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
I did this procedure 2 times to un-brick my phone...remember to select Re-Partition in ODIN
SO, once you do the first time and phone doesn't reboot, re-make the precedure...
Tuqano said:
I did this procedure 2 times to un-brick my phone...remember to select Re-Partition in ODIN
SO, once you do the first time and phone doesn't reboot, re-make the precedure...
Click to expand...
Click to collapse
But can you remember the errors you got first time round?
Sent from my GT-S5830 using XDA
sensation lover said:
But can you remember the errors you got first time round?
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
After it boot there were some yellow words....they said "can't mount" maybe....but I don't remember so well....
Try this:
If you have a Samsung firmware with only PDA (NOT CSC, CODE & MODEM) do the same procedure selecting re-partition in odin, and using .pit file too.
PRESS TNX BUTTON IF I HELP YOU :good:
The replier probably got all the same errors you did when in recovery. Make sure you have Kies Air installed on your PC for the drivers, and then kill off any processes related to Kies Air in the Task Manager. Then put your phone into download mode, open Odin, place files correctly in Odin, tick re-partition and click start. It obviously works as many have had to do this after not reading the FAQ on the ROM thread. Good luck anyway
Sent from my GT-I9100 using Tapatalk 2
Related
Ok a buddy of mine last night started rooting my phone using the (How to Root AT&T Galaxy Note SGH-i717! [ICS][Gingerbread][Easiest Method]) he made it through the first part of puting the cwm on it. then when he tried to connect the phone via usb, to transfer superuser, the compter would not recognize my phone. so he could not go anyfurther do to the time we had left. so i tried to go home and finish up on the computer, since i figured the hard part was over. Now my computer does not recognize it either. ive tried re-downloading the drivers and downloading kies. and still nothing.
so my question is, can i finish rooting with out a computer and if not, what can i do?
joshmingus said:
Ok a buddy of mine last night started rooting my phone using the (How to Root AT&T Galaxy Note SGH-i717! [ICS][Gingerbread][Easiest Method]) he made it through the first part of puting the cwm on it. then when he tried to connect the phone via usb, to transfer superuser, the compter would not recognize my phone. so he could not go anyfurther do to the time we had left. so i tried to go home and finish up on the computer, since i figured the hard part was over. Now my computer does not recognize it either. ive tried re-downloading the drivers and downloading kies. and still nothing.
so my question is, can i finish rooting with out a computer and if not, what can i do?
Click to expand...
Click to collapse
Download drivers. Go to rootgalaxynore.com for video and links to drivers
Sent from my SAMSUNG-SGH-I717 using xda premium
on the phone go to the site? because ive already re-downloaded the drives and that did not work.
joshmingus said:
on the phone go to the site? because ive already re-downloaded the drives and that did not work.
Click to expand...
Click to collapse
Just flash stock then redo root
Sent from my SAMSUNG-SGH-I717 using xda premium
I've assumed you followed direction got a rooted kernel using odin then install superuser, from that then use odin again to flash cwm.
Are you in download mode on your Note?
"1. Turn off your phone and uplug it. Take the battery out of your phone, put it back in, and hold the volume down button and power button at the same time. Keep them held down until the phone starts buzzing and you see the Samsung name.
2. At this point you are either in download mode or the phone will tell you to hit volume up, at which point you'll be ready."
IF not working, recommend starting from scratch
Use this first to get back to stock
http://forum.xda-developers.com/showthread.php?t=1506330
Then root via
http://forum.xda-developers.com/showthread.php?t=1504218
or this
http://forum.xda-developers.com/showthread.php?t=1518962
Then install CWM using Odin from here
http://forum.xda-developers.com/showthread.php?t=1584576
Once done, nandroid and happy flashing
Android The Greek said:
you would download the drivers from the desktop. Either way if you plug in while doin ia open and you see something highlighted in yellow then odin is recognizing. If tgats the case follow instructions on rootgalaxynote.com to odin back to stock then redo root. Follow the instructions very carefully especially the part about factory reset
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using xda premium
Android The Greek said:
Just flash stock then redo root
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
i only have cwm recovery on my phone. havent reached root yet, was not able to transfer superuser-zip file to phone because computer not recognizing phone via usb. and as i said i have tried many time installing drivers and kies. but still not working.
joshmingus said:
i only have cwm recovery on my phone. havent reached root yet, was not able to transfer superuser-zip file to phone because computer not recognizing phone via usb. and as i said i have tried many time installing drivers and kies. but still not working.
Click to expand...
Click to collapse
Have u used odin..and what all have u done so far?
Sent from my SAMSUNG-SGH-I717 using xda premium
joshmingus said:
i only have cwm recovery on my phone. havent reached root yet, was not able to transfer superuser-zip file to phone because computer not recognizing phone via usb. and as i said i have tried many time installing drivers and kies. but still not working.
Click to expand...
Click to collapse
If you see yellow in odin you can undo instructions
Sent from my SAMSUNG-SGH-I717 using xda premium
JB calhoun said:
Have u used odin..and what all have u done so far?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
i used odin to put cwm and thats it and i want to finishing rooting
joshmingus said:
i used odin to put cwm and thats it and i want to finishing rooting
Click to expand...
Click to collapse
Dl the tar files and use odin to root use ro super one click would root ur phone but i dont think it works anymore ..i used odin myself look in the general thread for the root tar its in there then click pda on odin select the prooer tar file and u will be stock rooted
Sent from my SAMSUNG-SGH-I717 using xda premium
joshmingus said:
i used odin to put cwm and thats it and i want to finishing rooting
Click to expand...
Click to collapse
You need to root first via odin then install cwm
Reverse what you did using odin or odin back to stock then start from scratch following my previous post
icce007 said:
You need to root first via odin then install cwm
Reverse what you did using odin or odin back to stock then start from scratch following my previous post
Click to expand...
Click to collapse
this is how i rooted and stopped after cwm mod was put on.
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
because the computer would not recognize phone after installing cwm
Try using a different cable or different USB port our maybe even a different computer and see if you can have a different setup recognize your phone. In the man time, read the tutorials at the top of the general section to get up to speed if your friend is not there to help anymore.
joshmingus said:
this is how i rooted and stopped after cwm mod was put on.
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
because the computer would not recognize phone after installing cwm
Click to expand...
Click to collapse
Dl att recovery b4 file hook ur phone to odin...it very simple
sent from team perfections ics rom
JB calhoun said:
Dl att recovery b4 file hook ur phone to odin...it very simple
sent from team perfections ics rom
Click to expand...
Click to collapse
I don't think he has super user so he might not be able to delete it. If he can't connect at all and odin doesn't recognise then he ia in a tight spot. If you can get into cwm by holding the power button and vol up and down, try wiping everything factory cache div. Cache then fix permissions. If that and the drivers being ddownloaded did not work i sure hope you have an att warranty or have only had the fone for 30 days. If you take it back to the retailer and act like its stock they will never know or care. Try to get a guy who is an iphone fanboy if you get and android wiz you could be out of luck
Sent from my SAMSUNG-SGH-I717 using xda premium
Question is did you tried to reconnect using odin?
At what point does the computer not recognize? in android or Odin?
Can you even boot into android?
If possible give us a screenie of where you are at!
icce007 said:
Question is did you tried to reconnect using odin?
At what point does the computer not recognize? in android or Odin?
Can you even boot into android?
If possible give us a screenie of where you are at!
Click to expand...
Click to collapse
really....
---------- Post added at 08:12 PM ---------- Previous post was at 08:09 PM ----------
joshmingus said:
Ok a buddy of mine last night started rooting my phone using the (How to Root AT&T Galaxy Note SGH-i717! [ICS][Gingerbread][Easiest Method]) he made it through the first part of puting the cwm on it. then when he tried to connect the phone via usb, to transfer superuser, the compter would not recognize my phone. so he could not go anyfurther do to the time we had left. so i tried to go home and finish up on the computer, since i figured the hard part was over. Now my computer does not recognize it either. ive tried re-downloading the drivers and downloading kies. and still nothing.
so my question is, can i finish rooting with out a computer and if not, what can i do?
Click to expand...
Click to collapse
this is the rason why u dont let friends do this kind of thing for u!! it is something u must learn..u may have bugs here and there and if u have no clue how to fix it ur %[email protected] so i would say undo all that he did then start fresh...use odin 1.85exe go find the att recovery b4 file plug in to odin click pda find where u put the recovery file that u DL put it in the pda box then u should be good to go
Ok ill make this so simple. You need to start over from the top. I would suggest going on YouTube search for how to root the Att galaxy note. Just watch it. Its a good way to learn odin. Then search Att galexy not recovery. This way you have a visual step by step. That's how I did it I watched it then followed along. I read all the comments (if any) in the comment section. Trust me it so much easier that way cuz you can stop and compare screens and such or stop and replay parts that u need.
Sent from my SAMSUNG-SGH-I717 using xda premium
If you can't access a computer.
I'm writing this because as I understand it, your friend was SUCCESSFUL at getting CWM on and just not root. If your phone is working otherwise, then try this.
With the phone turned OFF
Hold down BOTH volume buttons and turn the phone ON
When you see the Samsung logo appear LET GO of both volume buttons.
If you have CWM installed right you should be at the CWM menu, offering various options, just select REBOOT SYSTEM and post back here and let us know if CWM is in fact installed correctly.
Hi guys, i got a little issue with my galaxy i9300 international version, let me tell you what I did and the results to that.
1. Flashed with Cyanomogen 10.1. Working fine.
2. Then, afer a few days, flashed with Paranoid.
3. Phone starts to freeze, so as I didn't know was going on, and tried to flash with another ROM.
4. Flashed several times with ODIN and tried to stabilize it with stock room XELLA.
5. Flashed with Ultima ROM, still freeze sometimes.
6. Phone stops boots, if I turn on normally, shows a screen like an old tv, white with stripes.... also shows it when I plug it to charge it.
7. Only enters to download mode.
8. Tried to flash it, however says partition failed, there is no pit partition.
9. Tried with every single PIT partition mx that i found, and nothing, every time it says, Re-Partition failed.
10. Tried with a different computer, USB cable, everything... and nothing!..
11. Also tried with the rescue korean rom, and nothing.
12. Also tried with the single file from samfirmeware and the pit file, and nothing!
Any thoughts??? I'm desperate!
lumogox said:
Hi guys, i got a little issue with my galaxy i9300 international version, let me tell you what I did and the results to that.
1. Flashed with Cyanomogen 10.1. Working fine.
2. Then, afer a few days, flashed with Paranoid.
3. Phone starts to freeze, so as I didn't know was going on, and tried to flash with another ROM.
4. Flashed several times with ODIN and tried to stabilize it with stock room XELLA.
5. Flashed with Ultima ROM, still freeze sometimes.
6. Phone stops boots, if I turn on normally, shows a screen like an old tv, white with stripes.... also shows it when I plug it to charge it.
7. Only enters to download mode.
8. Tried to flash it, however says partition failed, there is no pit partition.
9. Tried with every single PIT partition mx that i found, and nothing, every time it says, Re-Partition failed.
10. Tried with a different computer, USB cable, everything... and nothing!..
11. Also tried with the rescue korean rom, and nothing.
12. Also tried with the single file from samfirmeware and the pit file, and nothing!
Any thoughts??? I'm desperate!
Click to expand...
Click to collapse
Any response? My phone is going through the exact same thing with the old TV static and only download mode working
Take phone to a service centre . Its a paid for repair warranty void .
jje
But you shoul give more details. When I read "flash several ROMs with Odin", I'm wondering what ROM? How did you use Odin? What version of Odin? etc...
flashing a wrong pit file kills the phone, and you flashed every possible one. good job
More details
Glebun said:
flashing a wrong pit file kills the phone, and you flashed every possible one. good job
Click to expand...
Click to collapse
Well I flashed the pit files when the phone was already bricked, not before. I try to do this as a possible resolution to my problem.
Kremata said:
But you shoul give more details. When I read "flash several ROMs with Odin", I'm wondering what ROM? How did you use Odin? What version of Odin? etc...
Click to expand...
Click to collapse
And the roms I flashed, in this order: 1. CyanogenMod 10.1, Paranoid, CyanogenMod again, and Ultima ROM.
After the installation of Paranoid, the device started to freeze, over and over again, and continue to do it over the other ROMs.
Also, I went to a so called "technician", and the guy says the mainboard must be replace, because i damage the bootloader.
Commets :laugh:
lumogox said:
Well I flashed the pit files when the phone was already bricked, not before. I try to do this as a possible resolution to my problem.
Click to expand...
Click to collapse
it doesn't matter, you've killed your phone
lumogox said:
Hi guys, i got a little issue with my galaxy i9300 international version, let me tell you what I did and the results to that.
1. Flashed with Cyanomogen 10.1. Working fine.
2. Then, afer a few days, flashed with Paranoid.
3. Phone starts to freeze, so as I didn't know was going on, and tried to flash with another ROM.
4. Flashed several times with ODIN and tried to stabilize it with stock room XELLA.
5. Flashed with Ultima ROM, still freeze sometimes.
6. Phone stops boots, if I turn on normally, shows a screen like an old tv, white with stripes.... also shows it when I plug it to charge it.
7. Only enters to download mode.
8. Tried to flash it, however says partition failed, there is no pit partition.
9. Tried with every single PIT partition mx that i found, and nothing, every time it says, Re-Partition failed.
10. Tried with a different computer, USB cable, everything... and nothing!..
11. Also tried with the rescue korean rom, and nothing.
12. Also tried with the single file from samfirmeware and the pit file, and nothing!
Any thoughts??? I'm desperate!
Click to expand...
Click to collapse
Download a 3 file firmware from sammobile and also download mx.pit file.
Open odin.
Select pit and locate the mx.pit you have downloaded. Select repartion check box and flash it.
Then reset odin.
Click on pda and select the code file of your 3 file firmware.
Select modem and click on modem part of the 3 file firmware.
And then click on csc and select the csc file.
Make sure re partition is not selected and that the pit box is blank.
Then hit start and how it works.
Drew071
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 02:32 AM ---------- Previous post was at 02:24 AM ----------
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
Zimbardo.ea originally posted this info on another thread. So credits to him/her for the links.
Use only the mx.pit in the pit rar.
If you manage to flash the pit but the 3 file firmware doesn't work, download speedmod kernel and flag the kernel only. Then go to cwm and then mounts and storage. Format system, data and cache. Then go back to download mode after a battery pull. And then flash the 3 file firmware again. Do not select a pit file and make sure re partition is unchecked.
This should work.
Hope it helps.
Drew071
Sent from my GT-I9300 using xda app-developers app
Off step one!
drew071 said:
Download a 3 file firmware from sammobile and also download mx.pit file.
Open odin.
Select pit and locate the mx.pit you have downloaded. Select repartion check box and flash it.
Then reset odin.
Click on pda and select the code file of your 3 file firmware.
Select modem and click on modem part of the 3 file firmware.
And then click on csc and select the csc file.
Make sure re partition is not selected and that the pit box is blank.
Then hit start and how it works.
Drew071
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 02:32 AM ---------- Previous post was at 02:24 AM ----------
Here's the link to a 3-file firmware:
Here's the one from SamMobile for the pit-files:
Zimbardo.ea originally posted this info on another thread. So credits to him/her for the links.
Use only the mx.pit in the pit rar.
If you manage to flash the pit but the 3 file firmware doesn't work, download speedmod kernel and flag the kernel only. Then go to cwm and then mounts and storage. Format system, data and cache. Then go back to download mode after a battery pull. And then flash the 3 file firmware again. Do not select a pit file and make sure re partition is unchecked.
This should work.
Hope it helps.
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help man, however when I try to flash the pit file, I got this:
"Re-Partition operation failed."
So, as you can see I'm off on step 1.
Also on download mode shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom.
So, no product name as you can see. And old TV set screen when I try to normally power on, or conecting the charger, or trying to go to recovery.
Got another trick under the sleeve? I would appreciate it... Thanks! :good:
lumogox said:
Thanks for the help man, however when I try to flash the pit file, I got this:
"Re-Partition operation failed."
So, as you can see I'm off on step 1.
Also on download mode shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom.
So, no product name as you can see. And old TV set screen when I try to normally power on, or conecting the charger, or trying to go to recovery.
Got another trick under the sleeve? I would appreciate it... Thanks! :good:
Click to expand...
Click to collapse
Can you access recovery?
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Can you access recovery?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No, only Download mode. Recovery shows the old tv like screen.
lumogox said:
No, only Download mode. Recovery shows the old tv like screen.
Click to expand...
Click to collapse
Have you another usb cable youcould use? I had this issue once in my s1 and it was the usb cable.
Drew071
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Have you another usb cable youcould use? I had this issue once in my s1 and it was the usb cable.
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
3 Different USB cables. Same thing.
you guys are not getting me. you flashed a wrong pit file, you're done
Glebun said:
you guys are not getting me. you flashed a wrong pit file, you're done
Click to expand...
Click to collapse
The are people that have Flashed pit files abs still recovered the phone. I'm pretty sure these phones are never that deaf until download mode is dead.
Would A jtag recover the phone?
Drew071
Sent from my GT-I9300 using xda app-developers app
Glebun said:
you guys are not getting me. you flashed a wrong pit file, you're done
Click to expand...
Click to collapse
It didn't do anything, Odin didn't have the time to flash the pit file, and it was already broken long before I try to re-partition the pit file through Odin.
So, no, that's not the problem.
lumogox said:
It didn't do anything, Odin didn't have the time to flash the pit file, and it was already broken long before I try to re-partition the pit file through Odin.
So, no, that's not the problem.
Click to expand...
Click to collapse
it is the problem. even if the phone was bricked, it was reversible. flashing the wrong pit file made the damage irreparable
Glebun said:
it is the problem. even if the phone was bricked, it was reversible. flashing the wrong pit file made the damage irreparable
Click to expand...
Click to collapse
Galaxy 4 next month. :laugh:
it's nice to be rich, isn't it?
drew071 said:
The are people that have Flashed pit files abs still recovered the phone. I'm pretty sure these phones are never that deaf until download mode is dead.
Would A jtag recover the phone?
Drew071
Sent from my GT-I9300 using xda app-developers app[/QUOTE
You've totally screwed your phone pit files shouldn't be flashed
stupidly will be met by sarcasm
Click to expand...
Click to collapse
Hey everyone my son got my Galaxy Note i717 and somehow managed to put a random password Now Im trying to wipe the data partition from the recovery menu but even there it asks for the password...what can I do?
Thanks in advance
Use Kies emergency firmware upgrade to wipe the phone and return it to stock.
Try "password".
rangercaptain said:
Use Kies emergency firmware upgrade to wipe the phone and return it to stock.
Click to expand...
Click to collapse
This Kies right?
http://www.samsung.com/us/kies/
Thanks for your reply
Correct. Running that from a windows PC not a Mac.
rangercaptain said:
Correct. Running that from a windows PC not a Mac.
Click to expand...
Click to collapse
When I open Kies it says connection locked so I click on Tools and click on firmware upgrade and initialisation but nothing happens.
Red_Gh0st said:
When I open Kies it says connection locked so I click on Tools and click on firmware upgrade and initialisation but nothing happens.
Click to expand...
Click to collapse
Connection locked means you have to unlock the phone. Hmm.. You might have to push either CWM or TWRP to the phone via ODIN and try wiping that way. Sounds like he encrypted the phone.
btswein said:
Connection locked means you have to unlock the phone. Hmm.. You might have to push either CWM or TWRP to the phone via ODIN and try wiping that way. Sounds like he encrypted the phone.
Click to expand...
Click to collapse
Thanks for your reply.... but how do i do that?
Or can you or someone point me to a tutorial?
Thanks again
Will this tutorial work?
http://tips4droid.com/how-to-root-and-install-cwm-recovery-on-att-galaxy-note-sgh-i717/#
Red_Gh0st said:
Will this tutorial work?
http://tips4droid.com/how-to-root-and-install-cwm-recovery-on-att-galaxy-note-sgh-i717/#
Click to expand...
Click to collapse
Yes, that will work. You only need step 1-8 though unless you want to root and not just install recovery. I would suggest downloading TWRP over CWM just because there are a lot of old versions of it floating around causing issues. Just DL the latest TWRP (2.4.4.0) here: http://goo.im/devs/OpenRecovery/sgh-i717/ put the file in the PDA slot, uncheck F. Reset Time, and hit start, wait for the success.
btswein said:
Yes, that will work. You only need step 1-8 though unless you want to root and not just install recovery. I would suggest downloading TWRP over CWM just because there are a lot of old versions of it floating around causing issues. Just DL the latest TWRP (2.4.4.0) here: http://goo.im/devs/OpenRecovery/sgh-i717/ put the file in the PDA slot, uncheck F. Reset Time, and hit start, wait for the success.
Click to expand...
Click to collapse
So instead of the file on step 5 I must download this TWRP?
Red_Gh0st said:
So instead of the file on step 5 I must download this TWRP?
Click to expand...
Click to collapse
Yup, download ODIN, open it, download TWRP, click PDA button, find TWRP file, unselect F. Reset Time, then click start.
btswein said:
Yup, download ODIN, open it, download TWRP, click PDA button, find TWRP file, unselect F. Reset Time, then click start.
Click to expand...
Click to collapse
Ok I did it with CMW because I couldnt find anything on the TWRP folder that had the extensions the PDA button was asking for but it still asks for the password
When I clicked Start it said everything was a success but when the phone reboots its the same.
You have to have TWRP in a IMG.tar format. Also what you are seeing in download mode is normal. You may want to read up on using odin first.
Sent from my SAMSUNG-SGH-I717 using xda premium
briand.mooreg said:
You have to have TWRP in a IMG.tar format. Also what you are seeing in download mode is normal. You may want to read up on using odin first.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Thanks briand, I edited my past post...can you read it again and tell me if that changes anything?
Btw, do I just rename the file's extension?
Did you boot into CWM (hold vol up, down, and power) and factory reset from there?
No, you don't rename it. You just download the img.tar..img.tar IS a tar file.
btswein said:
Did you boot into CWM (hold vol up, down, and power) and factory reset from there?
No, you don't rename it. You just download the img.tar..img.tar IS a tar file.
Click to expand...
Click to collapse
Just a tiny suggestion...
Don't post a link to a bunch of links to someone that's brand new... provide the DIRECT LINK
Red_Gh0st said:
Thanks briand, I edited my past post...can you read it again and tell me if that changes anything?
Btw, do I just rename the file's extension?
Click to expand...
Click to collapse
You did flash the stock ICS via odin, correct? If not do so, make sure to do a factory reset and wipe first. Then flash stock via odin. Then try using phone before installing CWM or TWRP. It should have cleared password problem.
Sent from my SAMSUNG-SGH-I717 using xda premium
Hi guys,
I think my phone going to KO.
This is my situation.
I phone totally cannot boot up, lucky i still able to go in download mode. but...
1. I try put 3 files PDA, Phone, CSC, select / no select re-partition it stuck in sbl.bin
2. I try put 1 files PDA flash, when start it stuck in cache.img
god... please help T_T
amazon83 said:
Hi guys,
I think my phone going to KO.
This is my situation.
I phone totally cannot boot up, lucky i still able to go in download mode. but...
1. I try put 3 files PDA, Phone, CSC, select / no select re-partition it stuck in sbl.bin
2. I try put 1 files PDA flash, when start it stuck in cache.img
god... please help T_T
Click to expand...
Click to collapse
I try all this link not working as well http://forum.xda-developers.com/showthread.php?t=1457458&highlight=sbl+bin
any expert advice?
amazon83 said:
I try all this link not working as well http://forum.xda-developers.com/showthread.php?t=1457458&highlight=sbl+bin
any expert advice?
Click to expand...
Click to collapse
1)try different ODIN version and see (also ensure to Kill all 'KIES' processes on ur PC while running ODIn and also temporarily disable any antivirus software running on ur PC)
2)Try diff USB port/Cable and see.
Yep. Search.
'Odin flash fails/Odin won't work' gets covered dozens of times here on a slow week. Search for similar threads, there are a set of troubleshooting steps you need to try/keep trying (That I'm never posting here ever again, tho if you ask Hopper nicely he might regurgitate them for you).
Edit - And if people did the right thing & made these lazy people search for these threads rather than regurgitating **** over & over the world would be a much better place.
amazon83 said:
I try all this link not working as well http://forum.xda-developers.com/showthread.php?t=1457458&highlight=sbl+bin
any expert advice?
Click to expand...
Click to collapse
Try my guide http://forum.xda-developers.com/showthread.php?t=2058683 just in case, if the kernel flash gets through and recovery boots up you have some fighting chance, else blind pit file flash bonanza or/and trashed motherboard/device.
Sent from my GT-I9100 using xda app-developers app
preserved ryTiaeptestuddr History
king_below_my_lord said:
Try my guide http://forum.xda-developers.com/showthread.php?t=2058683 just in case, if the kernel flash gets through and recovery boots up you have some fighting chance, else blind pit file flash bonanza or/and trashed motherboard/device.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
is not working
And what is?
Sent from my GT-I9100 using xda app-developers app
gastonw said:
And what is?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I try all this link http://forum.xda-developers.com/show....php?t=2058683 is not working.
I believe NAND Write Start stuck cannot be fix>?
Nand corruption sometimes pop up due to drivers conflict or odin being unable to write in your device's memory.
Why? Because the usual suspects:
Usb Cable
Usb Port
Odin version
Drivers conflict (another pc/laptop would be wise)
Antivirus
Sent from the little guy
My phone is a verizon galaxy note 2 USA verizon that took the vram ota update. Then this -
Hello,
To make a long story as short as possible. I used Adam Outlers Casual to flash my phone to beanstown's "jellybeans" rom. Everything was fine until I didnt like the volume not being able to go high. So using odin I checked the "nand erase all" like an idiot and flashed back to the stock unrooted rom using the pit file and the unrooted stock md5.
Now what happens:
Now the phone boots up but might be stuck in read only mode I am not sure and need help. Because when plugged into the computer it shows -104843489764 bytes for storage and won't let anything download to the phone. When I turned the cam on it says "not enough memory" and the worst part is it says "no sim card" and can't connect to the network for phone calls, texts or internet.
I can enter download mode. I can enter recovery mode. But all my attempts at using the repartition button while flashing again to stock rom did not work. I believe maybe I somehow have to format and repartition the internal storage? It won't let me flash clockworkmod using odin so I guess I have unrooted it. Im just mentioning all the things I have tried. Thank you very much for any help you can give.
Try refreshing the PIT file in Odin which should fix all of the partitions.
Also, a hard brick is only when your phone won't turn on, period. You have a soft brick which should be fixable.
Sent from my SCH-I605 using Tapatalk 4
miketoasty said:
Try refreshing the PIT file in Odin which should fix all of the partitions.
Also, a hard brick is only when your phone won't turn on, period. You have a soft brick which should be fixable.
Sent from my SCH-I605 using Tapatalk 4
Click to expand...
Click to collapse
Thank you for your help Sir.
I have the PIT file, and I used that when I flashed back to the stock verizon rom using Odin. Is there a way to use it by itself?
ry0t said:
Thank you for your help Sir.
I have the PIT file, and I used that when I flashed back to the stock verizon rom using Odin. Is there a way to use it by itself?
Click to expand...
Click to collapse
You should be able to open Odin and Judy flash it by itself. No extra steps needed.
Sent from my SCH-I605 using Tapatalk 4
miketoasty said:
You should be able to open Odin and Judy flash it by itself. No extra steps needed.
Sent from my SCH-I605 using Tapatalk 4
Click to expand...
Click to collapse
Hello again,
This thread for the galaxy s3 shows how to unbrick the phone that is in read-only mode. I know mine is too just like it says but I cant find the files for my phone or any other information on how to get my verizon note 2 out of read only or make sure it is formatted correctly to reinstall the stock rom. Here is the thread:
http://forum.xda-developers.com/showthread.php?t=1840030
"Sometimes when you flash a ROM (TouchWiz or AOSP), there is a risk of the /system and /data partitions not wiping correctly thus leading them to be formatted with R/O permissions rather than R/W. This makes it impossible for the phone to boot up because no data can be written."
What really concerns me also is when it's plugged in through USB and I click the drive for the internal storage it shows as having -1049874323 bytes of space instead of the usual 9gig free.
Email me with snapshot of the problem.... Nikhil.kdhand at gmail.com
Sent from my SCH-I605 using xda app-developers app
Hi,
Could you please let me know do you fix this problem? I am in the same situation.
Thanks a lot!
ry0t said:
My phone is a verizon galaxy note 2 USA verizon that took the vram ota update. Then this -
Hello,
To make a long story as short as possible. I used Adam Outlers Casual to flash my phone to beanstown's "jellybeans" rom. Everything was fine until I didnt like the volume not being able to go high. So using odin I checked the "nand erase all" like an idiot and flashed back to the stock unrooted rom using the pit file and the unrooted stock md5.
Now what happens:
Now the phone boots up but might be stuck in read only mode I am not sure and need help. Because when plugged into the computer it shows -104843489764 bytes for storage and won't let anything download to the phone. When I turned the cam on it says "not enough memory" and the worst part is it says "no sim card" and can't connect to the network for phone calls, texts or internet.
I can enter download mode. I can enter recovery mode. But all my attempts at using the repartition button while flashing again to stock rom did not work. I believe maybe I somehow have to format and repartition the internal storage? It won't let me flash clockworkmod using odin so I guess I have unrooted it. Im just mentioning all the things I have tried. Thank you very much for any help you can give.
Click to expand...
Click to collapse
I am in the same situation. Any updates?