Hello All,
I was attempting to update the firmware via Samsung Kies, boot into recovery as instructed, and now I'm stuck on the Downloading screen. I've went back and restarted the process and it pop up with a Notice message in Korean or Japanese (this also popped up the first time I've tried), clicked OK, and nothing else happens. In Kies, it's attempting to connect to the Tab and was not successful either.
The only thing that I've performed on the Tab since I've gotten it is "Root".
Do I need to "Unroot" in order to process this firmware update? Any help would be greatly appreciated.
Hello,
I bought a second hand HTC ONE S of some guy and as soon as it tried to update the firmware from 4.0.3 to the new 4.1, it does a restart and goes into Team Win Recovery Project 2.5 (twrp) and nothing happens since then. This is when I realized that device must have been rooted. I was checking the root on the device and it does not appear to be rooted any more (the root checker apps just get stuck on the "please wait", and I tried to install titanium backup, and it also gets stuck on "waiting for root access".
What can I do?
I am stuck with this phone now and really all I wanted was to have a stock updated version phone, nothing more.
Thanks for any help in advance.
I installed CWM and init.d to my ray. Restarted and plug in to charge. Next time I saw that my phone turned off and charged towards offline. When I started it goes into bootloop. I boot into recovery and wipeout what I can but bootloop continues.
I reflashed 4.0.4 stock firmware with flashtool but bootloop stays. I flashed nearly all stock firmware GB and ICS but I have the bootloop.
Bootloop with both logo 'Sony Ericsson' and 'Sony' .
SEUS said I have the newest firmware. Companion repair says no available firmware for my phone.
I tried to flash GB and start SEUS but still says that I have the latest software.
I haven't got cwm, fastboot, adb. Bootloader is locked and never been unlocked. (not allowable)
Sony software support is a piece of s**t.
Flashing not resolve this problem.
What can I do ? any ideas ? I have only flashmode.
Thanks!
I'm using Ray like you and if me were you i think you should root your device and use this rom:
http://forum.xda-developers.com/showthread.php?t=2135918
Click to expand...
Click to collapse
Now new ver is 8.0 with Kikat laucher but you can also use ver 7.0 if you don't like Kitkat laucher
But firstly you can read and try follow this:
http://forum.xda-developers.com/showthread.php?t=1426912
Click to expand...
Click to collapse
If you really think you can unlock your phone
Hello forum,
I recently came across a Chinese edition of the Xt910, the xt910s.
I'm not a bright man and i did several stupid things without reading.
I followed this guide to try to install a new firmware on it.
I now have a dead phone, which has CustomerID (CID) error.
I have no backup whatsoever of my CID.
How screwed am i?
I should note that i found a Retail Chinese 4.1.2 instead of the 4.0.4 which the guide suggested because I CANNOT FIND IT ANYWHERE. I never got to the part where i should install the update.
P.S. When i received this phone, it had no firmware at all and was stuck at AP Fastboot mode. (Bad Flashing of EU firmware, while it was the Chinese edition XT910S).
I ran out of juice and i force charged directly the battery with a usb cable which i modified. So battery is not a problem.
philippas said:
Hello forum,
I recently came across a Chinese edition of the Xt910, the xt910s.
I'm not a bright man and i did several stupid things without reading.
I followed this guide to try to install a new firmware on it.
I now have a dead phone, which has CustomerID (CID) error.
I have no backup whatsoever of my CID.
How screwed am i?
I should note that i found a Retail Chinese 4.1.2 instead of the 4.0.4 which the guide suggested because I CANNOT FIND IT ANYWHERE. I never got to the part where i should install the update.
P.S. When i received this phone, it had no firmware at all and was stuck at AP Fastboot mode. (Bad Flashing of EU firmware, while it was the Chinese edition XT910S).
I ran out of juice and i force charged directly the battery with a usb cable which i modified. So battery is not a problem.
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showthread.php?t=2300717
link on the chinese site says: fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-404-430-release-keys-ChinaRetail-CN_chn.tar.gz (which means it is 4.1.2 not 4.0.4 from my understanding)
and this is the one i downloaded and tried. Before that, I erased CID (from the guide i posted) and i flashed retail British .I got CustomerID error.
The only firmware that i can flash is
9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml_2
and not the chinese
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-384-402-release-keys-ChinaRetail-CN_chn
i flash it and i get a PASS on RSD Lite but even if i boot to BP Tools i still am stuck in the Moving M animation. Any help?
Anyone ?
Στάλθηκε από το GT-I9505 μου χρησιμοποιώντας Tapatalk
philippas said:
The only firmware that i can flash is
9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml_2
and not the chinese
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-384-402-release-keys-ChinaRetail-CN_chn
i flash it and i get a PASS on RSD Lite but even if i boot to BP Tools i still am stuck in the Moving M animation. Any help?
Click to expand...
Click to collapse
Enter boot menu,select "recovery" option.
Android lying down with the red triangle will show up,press "vol- "and "vol+" at the same time.Then you will get more options,one of them is "wipe data/factory reset",select it.That should help
Sent from my Razr XT910
welder73 said:
Enter boot menu,select "recovery" option.
Android lying down with the red triangle will show up,press "vol- "and "vol+" at the same time.Then you will get more options,one of them is "wipe data/factory reset",select it.That should help
Sent from my Razr XT910
Click to expand...
Click to collapse
I remember doing something similar after first success on RSD. I gets on the firmware (supposedly) PC isntalls all drivers, but Black Screen. Nothing at all. LCD should be Ok since i can see everything on Boot menu, Fastboot menu and Boot up animations. :/
Hello people. I was trying to install a custom ROM, but i was having problems with the CWM recovery, it said that my phone model was different in installation. All ROMs for the LG P768 had the same problem. Looking for a solution I saw a post saying that would have to update the CWM, so I picked up a newer version. After I installed the latest version, and restarted the phone, at first it didn't turn on, but now after LG's logo appears on the screen that android sign with the red triangle. The same thing happens when I do the hard reset. I've tried using the LG Mobile Support Tools, but gave error on updating. I don't know what else to do. Who can help I thank <3