Related
T-Mobile is shipping me a new phone to replace the one I have which has a bad USB.
The question is, what if I can not get the phone back to stock (cause of the bad USB)? I am now running a CM7.1 nightly.
If I do nothing (and keep CM7 on it), will I get backcharged for anything?
I can sometimes get the USB port to work for a short time. I can try to ODIN back to stock, but if I can not get the ODIN to complete, I can also run the risk of bricking my phone. Should I try anyway?
Is there any way to flash back to stock without ODIN?
Thanks
yes, need unrooted stock
Odin back to stock and format your sd card. Basically do a full wipe. This happened to me once and they never found out.
Simply Honey 5.0 w/ 1.2 Bullet kernel. Badass Rom \m/
That would be nightmare for me or anyone in general...have you tried a different USB cord? That worked for me when I thought my USB port was "broken".
duboi97 said:
That would be nightmare for me or anyone in general...have you tried a different USB cord? That worked for me when I thought my USB port was "broken".
Click to expand...
Click to collapse
I fear that it is a nightmare. I have 3 USB cords and can't get a reliable connection with any of them.
Sent from my SGH-T959 using Tapatalk
This happened to me before. If you can still connect even at an angle try to Odin it. If you brick it just say you tried to reformat it and it bricked on you. Yes it's scum bag status doing that but what else can you do when your broke
Sent from my SGH-T959 using XDA App
Logically the idea of a carrier physically checking every warranty exchange is ludicrous, when i sent mine in (7 months ago) i didn't even bother flashing to stock. reason it's ludicrous is because they're just boxes all these bad boys up and sending them back to samsung for a credit.
so about 2 weks ago i did the ota update to android 3.2. ever since then my tab has been acting crazy. it wont recognize charging unless i restart it plugged in. it will say mtp connected plugged in or not to usb. if plugged in the wall i cant turn it off it just boots itself back up. im trying to root but i cant get this thing to do SH*T. ive re installed drivers multiple times and if i go to device manager it wont show tab. any help would be great guys and gals
im running the ota update 3.2 for a few weeks now, no issues really other then a few tweaks I did to make the device fasters, I would suggest doing a factory reset via the settings menu, backup yer data first!! as for the drivers, the fastest way to get them to work is to install kies for galaxy tab, google it...my galaxy tab 10.1 is actually rooted, overclocked, and running a custom kernel...so its pretty fast, but even with all stock I have not had the problems you are talking about.
theandroidnerd said:
im running the ota update 3.2 for a few weeks now, no issues really other then a few tweaks I did to make the device fasters, I would suggest doing a factory reset via the settings menu, backup yer data first!! as for the drivers, the fastest way to get them to work is to install kies for galaxy tab, google it...my galaxy tab 10.1 is actually rooted, overclocked, and running a custom kernel...so its pretty fast, but even with all stock I have not had the problems you are talking about.
Click to expand...
Click to collapse
Well now I'm rooted running ics rom and over clocked, but my tab for whatever reason doesn't recognize being plugged in USB or ac. It did this prior to root but after 3.2 update. Like right now it says 3% battery and I need to plug it up. Problem is that its currently plugged in to AC charger. I can get it to sometimes recognize the plug if I restart it multiple times with plug in. If I power off then plug in it automatically powers up.
I just restarted while plugged in AC and it now says battery at 100% lol this thing is nuts.
Sell it to a developer really cheap, do a warranty exchange, ODIN back to stock and repeat.... I assume drivers on the PC are not the issue.
Yeah the PC drivers are fine. I really don't want to sell it or have to do the warranty exchange. If I send it back I'll have to unroot. Not to mention not having it for a while.
^ then keep pulling your hair out
Honestly, I understand. Also hate when people send devices in for warranty stuff.... but your issue sounds legit. I would be concerned if there was an issue with the charging port long-term.
ok so they said they would fix it but im trying to unroot and i need the stock recovery i downloaded the zip files for dummies and tied to use odin3 to flash the stock recovery that cam in the zip but it keeps failing.
so i just kept restarting into download mode and it finally worked
now that i have it unrooted its on 3.1 i need it on 3.2 before i send it back. i tried to do the update from the tab but it did one update but not for android 3.2.
So Im probably gonna send my tab back tomorrow. Do you guys think they will give me crap because my tabs now on 3.1 when I complained about an issue after update to 3.2?
xanmanz31 said:
So Im probably gonna send my tab back tomorrow. Do you guys think they will give me crap because my tabs now on 3.1 when I complained about an issue after update to 3.2?
Click to expand...
Click to collapse
If the issue is still happening, then no because its a hardware issue. Root or 3.2 didnt break it as the ODIN proved. Silly question, but you did try a different cable? And unless 3.2 changed something, only pershoots kernel allows for actual USB charging, stock TWUX never supported it. Only accepted a 2amp 3.7v on the correct cable (power wires are switched or something).
Sent from my SPH-D700 using XDA App
no i didnt try another cable and for me to run odin i had to restart the tab many times and when its plugged in the wall sometimes it recognizes and sometimes not when i plug in usb it wont mount storage or even to kies like the tab will show connected but the computer wont recognize tried all usb ports. i figured they might ask how i got it to 3.1 after doing the update without rooting i put stock recovery back on also to completely go back stock
xanmanz31 said:
no i didnt try another cable and for me to run odin i had to restart the tab many times and when its plugged in the wall sometimes it recognizes and sometimes not when i plug in usb it wont mount storage or even to kies like the tab will show connected but the computer wont recognize tried all usb ports. i figured they might ask how i got it to 3.1 after doing the update without rooting i put stock recovery back on also to completely go back stock
Click to expand...
Click to collapse
Definately sounds like a cable or 30 pin port issue. I will mention that Samsung has always been cheap with their cables on their phones anyway, but I haven't had an issue with the tabs. Onboard USB ports are the only ones I trust. Too many issues with front panel ports in the past with ODIN. I wouldn't worry about 3.1 vs 3.2 though. Of course you could always put 3.2 back on, I think there is an ODINable 3.2 around somewhere, but its been a while since I looked. Send it back, or try a different cable.
Sent from my SPH-D700 using XDA App
Got the tab back and rooted again with ics rom. Ended up replacing 30 pin port.
Sent from my GT-P7510 ics
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
USB Ports
Just out of curiosity, have you tried a different usb port? Sometimes (and I think it's windows fault) I can use something on a certain port for months, then it will stop working, changing ports fixes it, then when / if that port stops working i'll switch back to the first port I started with... rinse / repeat.
Remember the old Nintendo Carts, when they would get dusty, they wouldnt work until you cleaned them? Could be the same thing, issue with the port, dust, or just going bad.
It could either be a driver issue / and or the actual port. Esp if it's an older usb 1.1 spec port.
I am running OnlyOne, and it's running fine here as far as computer seeing it / charging. I don't think you would get 2 phones that are defective back to back, Check your computer first, especially if it consistently will charge with the AC adapter and not the computer.
mtnichols04 said:
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
Click to expand...
Click to collapse
Ive tried different ports on 3 different computers, tried cleaning, tried on usb 1.0 1.1 and 2.0 no luck, tried another person usb cable, earlier today with the wall charger it would charge, now, it wont charge at all. Kies drivers are installed, Thank you for your ideas though
I have an IT degree, Ive been working with electronics\computers for 10+ years and Im completely dumbfounded...
jb0nd38372 said:
Just out of curiosity, have you tried a different usb port? Sometimes (and I think it's windows fault) I can use something on a certain port for months, then it will stop working, changing ports fixes it, then when / if that port stops working i'll switch back to the first port I started with... rinse / repeat.
Remember the old Nintendo Carts, when they would get dusty, they wouldnt work until you cleaned them? Could be the same thing, issue with the port, dust, or just going bad.
It could either be a driver issue / and or the actual port. Esp if it's an older usb 1.1 spec port.
I am running OnlyOne, and it's running fine here as far as computer seeing it / charging. I don't think you would get 2 phones that are defective back to back, Check your computer first, especially if it consistently will charge with the AC adapter and not the computer.
Click to expand...
Click to collapse
mtnichols04 said:
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
Click to expand...
Click to collapse
Ouch..... Sorry Bud........
I hope you still have insurance on your phone and I would put it back to stock and see if that works out for you buddy.
If you have access to another phone , try to download seraphim a great from and put it on there and flash it. Inside of the newest seraphim there is a USB storage mount option which should fix your problem. I hope this will fix the problem
Sent from my GT-P7510 using XDA
Doesn't sound like a ROM issue or one that requires a different ROM to be installed just because it contains a USB selection. To me it sounds like you have a bad cable or a few bad cables. I would try a new micro usb cable. I have had that issue happen a few times with quite a few phones. Cables that just don't click when inserted don't always make the proper contacts. And owning another cable can't hurt, just make sure it is a good brand.
severinca said:
If you have access to another phone , try to download seraphim a great from and put it on there and flash it. Inside of the newest seraphim there is a USB storage mount option which should fix your problem. I hope this will fix the problem
Sent from my GT-P7510 using XDA
Click to expand...
Click to collapse
I tried reverting back to a Gingergbread rom, tried re flashing a few different roms, no luck. Tried a few different usb plugs from different phones... how can you mess up a micro USB just from flashing... makes no sense.
Idk about the charging part, but i had the same issue with pc not recognizing my phone after i flashed new ROM on it and could not share files and what not i found a solution for that try this. Make sure phone is unpluggdd from pc. Go to settings>Wireless and network>USB utilities> connect storage to pc then it will tell u to plug your phone, do so. And phone should prompt you with the normal USB storage click it and your good to go.
Sent from my SGH-I717R using XDA
I am trying to flash my vibrant to stock, but my laptop says usb unrecognized.This causes Odin not to detect my vibrant in download mode. I have downloaded all drivers including nexus drivers, but still same error usb unrecognized. I have then start on switching data cables including the stock data cables but the errors remain the same. I have tried on different computers and different windows, nothing working its the same errors on all computers. I have messed up by formatting everything in the Vibrant, now it boot loops to Vibrant logo. I can get into download mode normal but I cant get into CWM or any recovery mode, its probably because I have formatted the whole phone. When the phone is off, I plugged in the micro USB to the phone from the laptop, all it shows is the white lines that are in circler motions and then freezes. Weird my laptop still detects it as a USB unrecognized. As the phone is plugged in to the laptop I try taking the battery out and my phone is still on with the frozen screen of those white lines in circler Motions. Can anyone help me, or at least explain to me what the problem may be? My thoughts is that it may be a hardware problem. If so can anyone provide me some schematics on the USB portion? I hope we can bring some light on this problem. Giving it to T-Mobile is not an option. I have dealt with many problems and solved it, but this is one problem that keeps me stomp in my own tracks.
You can give a man a fish and he will eat for a day, but if you teach a man to fish, he will be able to eat for a lifetime!
Ok, so I am in a similar situation as yourself. I bought another Vibrant that was stuck on the bootloader screen. I gets into DL mode just fine, however Odin doesn't recognize it. I have uninstalled, reinstalled the drivers, used Nexus S and GNex drivers, 4 cords and 3ports and still no joy. My daily driver Vibe is like a mid-town flasher and is seen all over the place. So this leads me to believe that it is not driver/SW related but rather HW realted for me.
I think that my next step is to clean the USB ports on the phone and see if that works. If not, then I'll have to probably crack her open and clean there. I have another laptop that is using WinXP, so I might give that a try since nothing Samsung has ever been installed on it.
Keep me up to date with your findings and I will do the same with mine. Clearly I am not a noob but now this is just making me mad. Why one phone works/is seen and not the other. Common denomitator has to be HW.
Woodrube said:
Ok, so I am in a similar situation as yourself. I bought another Vibrant that was stuck on the bootloader screen. I gets into DL mode just fine, however Odin doesn't recognize it. I have uninstalled, reinstalled the drivers, used Nexus S and GNex drivers, 4 cords and 3ports and still no joy. My daily driver Vibe is like a mid-town flasher and is seen all over the place. So this leads me to believe that it is not driver/SW related but rather HW realted for me.
I think that my next step is to clean the USB ports on the phone and see if that works. If not, then I'll have to probably crack her open and clean there. I have another laptop that is using WinXP, so I might give that a try since nothing Samsung has ever been installed on it.
Keep me up to date with your findings and I will do the same with mine. Clearly I am not a noob but now this is just making me mad. Why one phone works/is seen and not the other. Common denomitator has to be HW.
Click to expand...
Click to collapse
I agree with you, it may be a HW issue. I have tried connecting other phones to my laptop and it reads it just fine, but for my vibrant no success. Im gonna go ahead and actally open it up and check on some componets, i have a feeling that it may have burnt one of the componets due to over charge. Ill get back with you on my findings. Keep me updated on your progress.
Before you open her up, have you tried cleaning the metal contacts inside the USB on the phone? I am at work not, so I can't try anything, but I would check that before opening. Might just need to be cleaned.
Woodrube said:
Before you open her up, have you tried cleaning the metal contacts inside the USB on the phone? I am at work not, so I can't try anything, but I would check that before opening. Might just need to be cleaned.
Click to expand...
Click to collapse
yes i've tried. I used a Q-tip and some alcohol, still same problems.
Update: Nothing!! How about you?
I have tried un/reinstalling the drivers, Odin v1.8, 1.3 and 1.0, about 4-5 cables and all 3 ports. I have cleaned the USB with alcohol and at this point am at a slight loss. The phone boots into DLmode and charges fine, so I don't think it is a faulty USB port. I cannot get into any recovery or ROM boot. All I have is DLmode and the GB bl screen. No kernel or ROM splash.
Gasp! I'm in a similar boat guys. My phone charges fine, and all my drivers are working and up to date...I can get into DL mode and all that jazz...phone even boots up and works! (fortunately)...but no dice on it being recognized by my or any computer. Glancing into the port, it looks like there may be some corrosion on the left hand side of the port, or some sort of damage...can't really tell without a proper magnifying glass. but it does look damaged or at least irregular. I've been reading around, and cleaning sounds like a potential solution...I've no idea how you guys are cleaning with giant q-tips lol but hopefully I can figure that one out also and give it a whirl xD But in the mean time, I sure hope somebody can come to the rescue
I don't know if this can help you guys, but this is how i hard bricked my vibrant few months ago. I get into download mode trying to get back to stock from ICS and my computer didn't recognize my phone....after a couple of hours my phone was completely dead and after a few days of research i brought it back to life using the unbrickable mod. What i'm thinking now is to use the Unbrickable Resurrector but you will need Linux...it always worked for me but i'm not sure if you need the unbrickable mod already applied. However i think if you have Linux installed you can have a try. Here is the link for the unbrickable resurrector http://forum.xda-developers.com/showthread.php?p=17135277#post17135277
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Midnight1970 said:
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Click to expand...
Click to collapse
You didn't use Rom Manager ever did you? Please say no
Have you tried re-installing Kies to get the drivers working again?
Then you can: - http://forum.xda-developers.com/showthread.php?t=1313659
Midnight1970 said:
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Click to expand...
Click to collapse
You can always use Mobile Odin to flash back to stock since your on a custom ROM.
jthatch12 said:
You didn't use Rom Manager ever did you? Please say no
Click to expand...
Click to collapse
Absolutely NOT.
This is a situation that's been coming over a period of time, starting with the inability to see it as a USB 2.0 device when initially plugged in, and now has deteriorated to the point that it can't even be seen.
Ruger20 said:
Have you tried re-installing Kies to get the drivers working again?
Then you can: - http://forum.xda-developers.com/showthread.php?t=1313659
Click to expand...
Click to collapse
Yeah, I sure did - nothing. Even in recovery, it won't "mount" usb there either.
Samsung's have a crappy USB port. It fails sometimes. You have a hard time charging at all?
But like I stated above, even without a computer connection you can get Mobile Odin and flash back to stock, as long as your rooted.
I'm having this same issue. I just got the phone earlier this week and I am unable to get bit connected to my pc to root or Odin. I have installed and uninstalled Kies multiple times on two different computers, tries different ports, and checked if the cable worked by using another phone (PC recognized without an issue). I get the USB not recognized or the 2.0 USB message. If I enable debugging, I can connect regularly and transfer files through windows explorer. But if I use USB debugging off, then nothing will work. I've tried using odin and it will just get stuck at setup connection or cache.img and then I'd have to pull the device. I've tries updating through Kies when it shows the USB 2.0 message but once the S2 hits download mode then the computer stops recognizing it. I have also tried installing the i777 drovers on the Samsung website and its still a no go. Does anyone know how to fix this? Its not rooted so mobile Odin won't help me now.
Sent from my Samsung Infuse on CM10 using Tapatalk
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
allyourbase said:
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
Click to expand...
Click to collapse
Yes. USB cables go bad often, especially these crappy micro B connectors.
allyourbase said:
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
Click to expand...
Click to collapse
It is the OEM cable that came with my Samsung Infuse. It worked with the T989 3 days ago and it's not working with my i777. Its strange because I tried it with my infuse again and I am able to Odin just fine. Could it really be an issue with my USB or will it be a PCB issue? I would rather or not disassemble my phone if it is a PCB issue. Should be able to do a warranty exchange though.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
DangKid said:
It is the OEM cable that came with my Samsung Infuse. It worked with the T989 3 days ago and it's not working with my i777. Its strange because I tried it with my infuse again and I am able to Odin just fine. Could it really be an issue with my USB or will it be a PCB issue? I would rather or not disassemble my phone if it is a PCB issue. Should be able to do a warranty exchange though.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I hate to break it to you brother but it's damn near impossible to determine what the actual culprit could be, your best best is to try each and every single different thing I've listed. The end result being changing the PCB which one, isn't that hard, and two, is very cheap the only problem is waiting for the board to come in the mail.
allyourbase said:
I hate to break it to you brother but it's damn near impossible to determine what the actual culprit could be, your best best is to try each and every single different thing I've listed. The end result being changing the PCB which one, isn't that hard, and two, is very cheap the only problem is waiting for the board to come in the mail.
Click to expand...
Click to collapse
I understand, which is why I'm hoping that by posting my story up, someone who has experienced the same problem can help. If not, then I can get others' opinion on it and when the issue is fixed, the solution will be available for future users.
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
Its the usb board on your phone.
I have the same problem so now I have to get mine changed too.
I've soft bricked my phone 2 times with this problem and it takes hours to get Odin to pick up my phone.
Swap the faulty chip and you should be good.
transmitted from the Dark Obelisk
Noz85 said:
Its the usb board on your phone.
I have the same problem so now I have to get mine changed too.
I've soft bricked my phone 2 times with this problem and it takes hours to get Odin to pick up my phone.
Swap the faulty chip and you should be good.
transmitted from the Dark Obelisk
Click to expand...
Click to collapse
Its strange because when I enable USB debugging, I can get a "USB connection" on the phone and data transfers fine. But when I turn it off, I get a "MTP connection" and sometimes it'll connect (5% of the time) and allow me to transfer data. But when lies tries to update when that mtp connection is active, it'll hang when the phone goes into download mode. Did you have this same issue?
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
DangKid said:
Its strange because when I enable USB debugging, I can get a "USB connection" on the phone and data transfers fine. But when I turn it off, I get a "MTP connection" and sometimes it'll connect (5% of the time) and allow me to transfer data. But when lies tries to update when that mtp connection is active, it'll hang when the phone goes into download mode. Did you have this same issue?
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
Click to expand...
Click to collapse
I f you're able to transfer files via mass storage with USB debugging enabled then you can (most likely) rule out hardware failure on your phone.
If anything this sounds like a driver issue on the cpmputer. Are you running windows? If so remove and reinstall the drivers for your phone.
Still think its hardware.
I can connect 1/100 of the times I'm plugged into a computer. Its not a driver issue because my girlfriend has an i777 as well and no problems for her connecting at all.
Its not ROM related because I have this problem with all ROMs.
transmitted from the Dark Obelisk
Noz85 said:
Still think its hardware.
I can connect 1/100 of the times I'm plugged into a computer. Its not a driver issue because my girlfriend has an i777 as well and no problems for her connecting at all.
Its not ROM related because I have this problem with all ROMs.
transmitted from the Dark Obelisk
Click to expand...
Click to collapse
Does that apply to ums as well? From his description he can connect in ums just fine. Its only mtp that's giving him problems. In his case, with the problem only being in one connection mode, it leads me to think drivers. In your case, tested against another s2 I'd say hardware.
Just tried using a Motorola cable and a third PC and my chances of connection increased to about 15-20%. Kies and Odin failed on me a few times just like I had described before. But eventually Odin was able to flash okay. Finally on ICS on my i777! I think I'll stay on stock since I'd rather not go USB and PC hunting to flash stock if anything goes wrong.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
DangKid said:
Just tried using a Motorola cable and a third PC and my chances of connection increased to about 15-20%. Kies and Odin failed on me a few times just like I had described before. But eventually Odin was able to flash okay. Finally on ICS on my i777! I think I'll stay on stock since I'd rather not go USB and PC hunting to flash stock if anything goes wrong.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Good to hear you got it working BUT do note if you flashed the stock ICS be aware of the eMMC SUPERBRICK BUG you should read up on the issues here is a link to some info on it......
http://forum.xda-developers.com/showthread.php?t=1746181