Stuck in Invalid Flash Mode - Motorola Droid RAZR

Hi guys,
So I have a problem with my friends Razr Maxx on Verizon... she hated ICS and wanted GB back on her phone... I rooted the phone just fine and was going to flash the GB sbf (2.3.6) that I found on here. During the process in RSD Lite I got a failure(dont remember what exactly it said though
). Now her phone is softbricked, and when I try to go to "tools" in fastboot menu the red M blinks then it brings me right back to this screen:
"Invalid Flash Mode (s) (Boot Failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP data
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)"
If anyone has any ideas on how to fix this problem I would appricate it, my friend is freaking out because she doesnt want to lose the limited edition employee Razr Maxx

---

First, try to charge the phone by plug in to wallcharger or search this forum for "low battery" solutions.
Then you would try the Matt's tools here
http://forum.xda-developers.com/showthread.php?t=1769345
That tool will restore ur friend phone to stock ICS.
As i know becoz bootloader is locked we can not go back to GB once already on ICS.
Good luck!
Sent from my DROID RAZR using xda premium

---

reachking said:
First, try to charge the phone by plug in to wallcharger or search this forum for "low battery" solutions.
Then you would try the Matt's tools here
http://forum.xda-developers.com/showthread.php?t=1769345
That tool will restore ur friend phone to stock ICS.
As i know becoz bootloader is locked we can not go back to GB once already on ICS.
Good luck!
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
I have done that and it doesnt seem to charge... and I have tried to use Matts tool however now it just sits on "waiting for device" I never post my problems and usually just use XDA to fix these type of issues but I have looked at every forum on here and couldnt find anything about this problem using a Verizon Razr Maxx

---

petrr311 said:
I have done that and it doesnt seem to charge... and I have tried to use Matts tool however now it just sits on "waiting for device" I never post my problems and usually just use XDA to fix these type of issues but I have looked at every forum on here and couldnt find anything about this problem using a Verizon Razr Maxx
Click to expand...
Click to collapse
if that's the case, i believe ur gonna need a Motorola factory cable to get it back to life like i did.. unless someone knows another alternative..
Sent from my XT910 using xda app-developers app

---

imho, you have to have a working /system to charge the battery without booting.
You could try to solder a microUSB to make a Motorola Factory cable. This cable will ignore the low battery problem.
Tutorial here: http://forum.xda-developers.com/showthread.php?p=20521609
Or purchase from ebay: http://shop.mobileweb.ebay.com/searchresults?cmd=SKW&catid=0&kw=motorola+factory+cable
Then use Matts tool.
Sent from my DROID RAZR using xda premium

---

Thanks for the suggestions, but I just spoke to her and shes just going to get a a replacement and sell it to get a SGS III

---

Razr Maxx
I'm having the same problem, (not meaning to hijack a thread here)
Stuck in Fastboot mode, battery too low to program, unable to charge because in fastboot mode.
Am I going to need this factory cable, to get the fastboot mode to complete the programming using
Matts tool option 1 and HOPEFULLY if that gets me back to stock rom, then I can finally charge up my Maxx using my
regular charger .... correct?
reachking said:
imho, you have to have a working /system to charge the battery without booting.
You could try to solder a microUSB to make a Motorola Factory cable. This cable will ignore the low battery problem.
Tutorial here: http://forum.xda-developers.com/showthread.php?p=20521609
Or purchase from ebay: http://shop.mobileweb.ebay.com/searchresults?cmd=SKW&catid=0&kw=motorola+factory+cable
Then use Matts tool.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse

---

jmbode said:
I'm having the same problem, (not meaning to hijack a thread here)
Stuck in Fastboot mode, battery too low to program, unable to charge because in fastboot mode.
Am I going to need this factory cable, to get the fastboot mode to complete the programming using
Matts tool option 1 and HOPEFULLY if that gets me back to stock rom, then I can finally charge up my Maxx using my
regular charger .... correct?
Click to expand...
Click to collapse
Yes you need a factory cable our adapter
Sent from my XT925 using Tapatalk 2

---

How is it so many people try to program (Flash) there phone without have a good charge on the battery. The first thing I always check before I do anything is check the charge level.

---

blackops11252 said:
How is it so many people try to program (Flash) there phone without have a good charge on the battery. The first thing I always check before I do anything is check the charge level.
Click to expand...
Click to collapse
I understand what you're saying if you do it so many times, and then slip one time ... if I knew what the results were going to be, then I
would have waited ...
Yes, got the Factory Cable on the way ... just have to wait ...
I thank all the wonderful people of XDA so people like me can realize they arent the only one with the same exact problem, and usually
find a way out ... this is the closest i have come to bricking my phone, ANY phone for that matter ....