Just got the Droid Razr. Rooted with motofail and used bootstrap for CWM. Was doing a data wipe before i installed a ROM and phone crashed during the format. Phone turns on and goes straight to the ! screen with the android on it. And it just shows this:
E:Can't read misc
(I/0 error)
E:Error in /cache/recovery/log
(I/0 error)
E:Error in /cache/recovery/log
(I/0 error)
E:Can't read misc
(I/0 error)
I've tried doing the factory reset option and it just shows the same errors as above. I have no idea wut to do from here. Any help would be greatly appreciated.
ybrian said:
Just got the Droid Razr. Rooted with motofail and used bootstrap for CWM. Was doing a data wipe before i installed a ROM and phone crashed during the format. Phone turns on and goes straight to the ! screen with the android on it. And it just shows this:
E:Can't read misc
(I/0 error)
E:Error in /cache/recovery/log
(I/0 error)
E:Error in /cache/recovery/log
(I/0 error)
E:Can't read misc
(I/0 error)
I've tried doing the factory reset option and it just shows the same errors as above. I have no idea wut to do from here. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Flash new rom with RSD lite again. You had damaged system. Thanks
Sent from my XT910 using Tapatalk
pedrotorresfilho said:
Flash new rom with RSD lite again. You had damaged system. Thanks
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
What is RSD Lite?
ybrian said:
What is RSD Lite?
Click to expand...
Click to collapse
It's a software to update Roms, themes, etc.
Read this
http://forum.xda-developers.com/showthread.php?t=1518472
Thanks
Sent from my XT910 using Tapatalk
Tried this method with no luck. my phone died in the process. And from what i read i am now the proud owner of a paper weight unless i have the programming cable to charge in fastboot mode.
ybrian said:
Tried this method with no luck. my phone died in the process. And from what i read i am now the proud owner of a paper weight unless i have the programming cable to charge in fastboot mode.
Click to expand...
Click to collapse
i had the same problem, but could access the reboot option while pressing VOL-UP + VOL-DOWN. Maybe this helps you to access normal boot operation and load the phone while running?
if not, don't you have the original cable of the charger? this will change your battery low state to battery ok... did this while having completly flash failure.
i hope i could help you.
Sh4itan said:
i had the same problem, but could access the reboot option while pressing VOL-UP + VOL-DOWN. Maybe this helps you to access normal boot operation and load the phone while running?
if not, don't you have the original cable of the charger? this will change your battery low state to battery ok... did this while having completly flash failure.
i hope i could help you.
Click to expand...
Click to collapse
Yeah I am able to access that menu with the volume buttons but it doesn't let me load anything just gives the errors. And I do have the original charger but it has not charged the phone at all. Still says battery low cannot program.
Sent from my VS910 4G using xda premium
ybrian said:
Yeah I am able to access that menu with the volume buttons but it doesn't let me load anything just gives the errors. And I do have the original charger but it has not charged the phone at all. Still says battery low cannot program.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
You razr are soft-bricked. This means you cannot program or charge the battery.
The solution is to use a 'factory cable' (will post a link here) to flash a new rom on it. After loading system files you'll be able to charge it again.
Here it's
http://forum.xda-developers.com/showthread.php?t=1403100
You may find more tutorials over the internet (google) how-to build a factory cable.
Thanks
Sent from my XT910 using Tapatalk
Sh4itan said:
i had the same problem, but could access the reboot option while pressing VOL-UP + VOL-DOWN. Maybe this helps you to access normal boot operation and load the phone while running?
if not, don't you have the original cable of the charger? this will change your battery low state to battery ok... did this while having completly flash failure.
i hope i could help you.
Click to expand...
Click to collapse
+1 to this quote!!
Sent from my XT910 using XDA App
Sh4itan said:
i had the same problem, but could access the reboot option while pressing VOL-UP + VOL-DOWN. Maybe this helps you to access normal boot operation and load the phone while running?
if not, don't you have the original cable of the charger? this will change your battery low state to battery ok... did this while having completly flash failure.
i hope i could help you.
Click to expand...
Click to collapse
I dont have a problem right now but this is good to know for the future. I do have my original charger and cable. If I do have this problem where it is reporting battery low I can charge up my phone and then flash?
Some are saying it will report battery low even with a full battery in fastboot mode. Will this "original charger cable" bypass that or something?
Shinare said:
I dont have a problem right now but this is good to know for the future. I do have my original charger and cable. If I do have this problem where it is reporting battery low I can charge up my phone and then flash?
Some are saying it will report battery low even with a full battery in fastboot mode. Will this "original charger cable" bypass that or something?
Click to expand...
Click to collapse
Read my previous post. You'll not be able to charge razr with battery low status in a danaged system phone. Got it?
Sent from my XT910 using Tapatalk
Could I take the battery out of my daughter's razr and put it in mine and flash?
i guess you could if you opened the razr up. remember not a very easy battery cover to remove.
school boy error flashing with low battery!! know your surroundings without sounding too patronizing.
pedrotorresfilho said:
Read my previous post. You'll not be able to charge razr with battery low status in a danaged system phone. Got it?
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
he's just asking if ur able to charge phone using original cables when battery state just shows as low.
anyhu yes u can do in that state.. i usually go into fastboot mode.. but best to use mains socket for charging!!
Sent from my XT910 using XDA App
Shinare said:
Could I take the battery out of my daughter's razr and put it in mine and flash?
Click to expand...
Click to collapse
u can try but would take time to get the cover off but then ud require the right tools to help release the battery! not easy task but there is some website out there if u decide to go ahead with it.. prob need to search for 'droid razr disassembling' on google!
hope it helps!!
Sent from my XT910 using XDA App
I'm not having a problem right now thank goodness I was just asking because I was curious... In case this happens to me. Running eclipse and loving it.
Sent from my GALAXY NEXUS using XDA
Shinare said:
Could I take the battery out of my daughter's razr and put it in mine and flash?
Click to expand...
Click to collapse
Take a look
http://forum.xda-developers.com/showthread.php?t=1533824
Glad to help
Sent from my XT910 using Tapatalk
Shinare said:
I dont have a problem right now but this is good to know for the future. I do have my original charger and cable. If I do have this problem where it is reporting battery low I can charge up my phone and then flash?
Some are saying it will report battery low even with a full battery in fastboot mode. Will this "original charger cable" bypass that or something?
Click to expand...
Click to collapse
i really don't know exactly if this will work on every razr with every delivered original cable + charger. but i was an idiot to try a flash with 20% battery life remaining... after this failed i got battery low state... plugged the phone to the charger, it booted to flash failure fastboot menu with telling me battery is low.
so i just tried to flash it via eternityprojects fla**** batch... everytime battery low... besides, i tried it with original cable, but plugged some cable between charger (and even pc) and the original cable...
but after i just plugged it to my notebook only via original delivered cable several(!!!) times, it showed me 'battery ok'...
was in apprentice class at the time and screamed as happy as is was
flashed perfectly
Sent from my XT910(as Nexus S) using XDA App
pedrotorresfilho said:
You razr are soft-bricked. This means you cannot program or charge the battery.
The solution is to use a 'factory cable' (will post a link here) to flash a new rom on it. After loading system files you'll be able to charge it again.
Here it's
http://forum.xda-developers.com/showthread.php?t=1403100
You may find more tutorials over the internet (google) how-to build a factory cable.
Thanks
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
Thanks for the help! Just made the cable and ran the razr utility and the phone is now back to stock and currently charging!
Sent from my VS910 4G using xda premium
It sounds like you are a relieved man. Glad its working.
Sent from my XT910 using xda premium
Related
hello, yesterday i wanted to flash a new rom.
i made full wipe, deleted cache and dalvik cache.
and i made a restart before flashing the new rom.
now i get the message: device is locked, status code:0
battery ok
ok to program
transfer mode:
usb connected
what can i do to rescue the phone ? it has been bought 3 weeks ago in germany for 489 euro.
All razrs currently have the locked status, it's referring to the boot loader which moto has declined to unlock.
Sent from my XT910 using xda premium
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
kirmizibasliklioglan said:
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
Click to expand...
Click to collapse
Can you charge the battery?
It's normal, nothing wrong happened.
At this time you can flash a new compatibile rom via RSD
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
kirmizibasliklioglan said:
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
Click to expand...
Click to collapse
Go Motorola Suport Website and look for Warranty. Provide your IMEI number and you'll get the service provider (carrier) you phone is attached. Then you'll know wich rom to flash.
Motorola Support - Warranty Status
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
But can you normally reboot your phone now?
You need to recharge before attempting to flash.
If you can't do this, try this link. I don't know if it works
http://forum.xda-developers.com/showthread.php?t=1549625
I think you can flash 651.167.26 or .19/20. You can find it on Motorola official roms thread
http://www.android-hilfe.de/root-hacking-modding-fuer-motorola-razr/232299-factory-adapter.html
5€ and your Phone will be fine...
To charge your phone: Click the link
To load a stock ROM: Click the link
If you still have questions, there's usually someone here.
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
Get your IMEI in sdcard door of your razr then visit motorola support website I posted and you'll know wich rom to flash. You'll need to flash it with a factory cable as said above.
Good luck!
Sent from my XT910 using Tapatalk 2
kirmizibasliklioglan said:
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
Click to expand...
Click to collapse
nice to hear it worked. Cheers
Sent from my XT910 using Tapatalk 2
Hi guys,
So I have a problem with my friends Razr Maxx on Verizon... she hated ICS and wanted GB back on her phone... I rooted the phone just fine and was going to flash the GB sbf (2.3.6) that I found on here. During the process in RSD Lite I got a failure(dont remember what exactly it said though
). Now her phone is softbricked, and when I try to go to "tools" in fastboot menu the red M blinks then it brings me right back to this screen:
"Invalid Flash Mode (s) (Boot Failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP data
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)"
If anyone has any ideas on how to fix this problem I would appricate it, my friend is freaking out because she doesnt want to lose the limited edition employee Razr Maxx
First, try to charge the phone by plug in to wallcharger or search this forum for "low battery" solutions.
Then you would try the Matt's tools here
http://forum.xda-developers.com/showthread.php?t=1769345
That tool will restore ur friend phone to stock ICS.
As i know becoz bootloader is locked we can not go back to GB once already on ICS.
Good luck!
Sent from my DROID RAZR using xda premium
reachking said:
First, try to charge the phone by plug in to wallcharger or search this forum for "low battery" solutions.
Then you would try the Matt's tools here
http://forum.xda-developers.com/showthread.php?t=1769345
That tool will restore ur friend phone to stock ICS.
As i know becoz bootloader is locked we can not go back to GB once already on ICS.
Good luck!
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
I have done that and it doesnt seem to charge... and I have tried to use Matts tool however now it just sits on "waiting for device" I never post my problems and usually just use XDA to fix these type of issues but I have looked at every forum on here and couldnt find anything about this problem using a Verizon Razr Maxx
petrr311 said:
I have done that and it doesnt seem to charge... and I have tried to use Matts tool however now it just sits on "waiting for device" I never post my problems and usually just use XDA to fix these type of issues but I have looked at every forum on here and couldnt find anything about this problem using a Verizon Razr Maxx
Click to expand...
Click to collapse
if that's the case, i believe ur gonna need a Motorola factory cable to get it back to life like i did.. unless someone knows another alternative..
Sent from my XT910 using xda app-developers app
imho, you have to have a working /system to charge the battery without booting.
You could try to solder a microUSB to make a Motorola Factory cable. This cable will ignore the low battery problem.
Tutorial here: http://forum.xda-developers.com/showthread.php?p=20521609
Or purchase from ebay: http://shop.mobileweb.ebay.com/searchresults?cmd=SKW&catid=0&kw=motorola+factory+cable
Then use Matts tool.
Sent from my DROID RAZR using xda premium
Thanks for the suggestions, but I just spoke to her and shes just going to get a a replacement and sell it to get a SGS III
Razr Maxx
I'm having the same problem, (not meaning to hijack a thread here)
Stuck in Fastboot mode, battery too low to program, unable to charge because in fastboot mode.
Am I going to need this factory cable, to get the fastboot mode to complete the programming using
Matts tool option 1 and HOPEFULLY if that gets me back to stock rom, then I can finally charge up my Maxx using my
regular charger .... correct?
reachking said:
imho, you have to have a working /system to charge the battery without booting.
You could try to solder a microUSB to make a Motorola Factory cable. This cable will ignore the low battery problem.
Tutorial here: http://forum.xda-developers.com/showthread.php?p=20521609
Or purchase from ebay: http://shop.mobileweb.ebay.com/searchresults?cmd=SKW&catid=0&kw=motorola+factory+cable
Then use Matts tool.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
jmbode said:
I'm having the same problem, (not meaning to hijack a thread here)
Stuck in Fastboot mode, battery too low to program, unable to charge because in fastboot mode.
Am I going to need this factory cable, to get the fastboot mode to complete the programming using
Matts tool option 1 and HOPEFULLY if that gets me back to stock rom, then I can finally charge up my Maxx using my
regular charger .... correct?
Click to expand...
Click to collapse
Yes you need a factory cable our adapter
Sent from my XT925 using Tapatalk 2
How is it so many people try to program (Flash) there phone without have a good charge on the battery. The first thing I always check before I do anything is check the charge level.
blackops11252 said:
How is it so many people try to program (Flash) there phone without have a good charge on the battery. The first thing I always check before I do anything is check the charge level.
Click to expand...
Click to collapse
I understand what you're saying if you do it so many times, and then slip one time ... if I knew what the results were going to be, then I
would have waited ...
Yes, got the Factory Cable on the way ... just have to wait ...
I thank all the wonderful people of XDA so people like me can realize they arent the only one with the same exact problem, and usually
find a way out ... this is the closest i have come to bricking my phone, ANY phone for that matter ....
Hello,
After following this tutorial
http://forum.xda-developers.com/showthread.php?t=1134057
my touchscreen stopped working and my USB debugging is disabled. I have no recovery app, like CWM.
I need help to restore my system or to enable the USB debugging without using the touchscreen, so I can fix the problem.
Please guys, I'm desperate and I don't know what to do
Thanks
dudsmat said:
Hello,
After following this tutorial
http://forum.xda-developers.com/showthread.php?t=1134057
my touchscreen stopped working and my USB debugging is disabled. I have no recovery app, like CWM.
I need help to restore my system or to enable the USB debugging without using the touchscreen, so I can fix the problem.
Please guys, I'm desperate and I don't know what to do
Thanks
Click to expand...
Click to collapse
With no usable recovery and no USB debugging enabled... You're in a really difficult situation here.
The only thing I can think of is, you can try reflashing the original stock firmware using the official methods. Never done this nor do I intend to so I have no pointers for you there, sorry. You might also lose your data, not sure. But hey, at least you should have a functioning phone again!
Perhaps the local experts here will come up with something else, so stay tuned.
You will probably have to fastboot a new rom. But first you will have to unlock your bootloader. See the guides at the top of the General section.
Well my noobish suggestion is start by fast boot flashing a current recovery. Then flash the zip file in your linked thread, and you should be up and running.
I've just used this: http://forum.xda-developers.com/showthread.php?t=1163342
Now my phone doesn't boot:
"Failed to boot 4
Starting RSD mode"
Aparently, I can't use Fastboot anymore.
Is there a way to recover it using RSD Mode?
Is your bootloader unlocked?
upndwn4par said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
Yes, it is.
But now I'm stuck at RSD Mode in the "Boot failed" screen
Relax, you've got a soft brick. You can recover.
Carefully follow the instructions on the link below (this worked for me). Keep in mind that your soft brick can turn in to a hard brick, so do this at your own risk. Flashing sbf files is risky, but at this point you don't have much of a choice.
http://www.digitaltweaker.com/andro...led-to-boot-4-after-upgrading-to-4-5-141-ota/
Edit:
Good luck!
upndwn4par said:
Relax, you've got a soft brick. You can recover.
Carefully follow the instructions on the link below (this worked for me). Keep in mind that your soft brick can turn in to a hard brick, so do this at your own risk. Flashing sbf files is risky, but at this point you don't have much of a choice.
Click to expand...
Click to collapse
I was doing what you said, but now I've got another problem: The battery doesn't charge.
In the wall charger, it freeze in the boot screen. In the USB, I just get a green light.
Does anybody know a solution for this battery issue?
First off, did you successfully recover from your soft brick?
you could just use the lapdock and fix the problem from start..
dudsmat said:
I was doing what you said, but now I've got another problem: The battery doesn't charge.
In the wall charger, it freeze in the boot screen. In the USB, I just get a green light.
Does anybody know a solution for this battery issue?
Click to expand...
Click to collapse
take out your battery, plug into the wall charger to force it into charge mode. place your battery in the phone.
if this doesn't work, you'll have to destroy a USB cable and charge it manually.
"if this doesn't work, you'll have to destroy a USB cable and charge it manually"
How do you do that?
Alcapone263 said:
take out your battery, plug into the wall charger to force it into charge mode. place your battery in the phone.
if this doesn't work, you'll have to destroy a USB cable and charge it manually.
Click to expand...
Click to collapse
upndwn4par said:
"if this doesn't work, you'll have to destroy a USB cable and charge it manually"
How do you do that?
Click to expand...
Click to collapse
Essentially its making a factory cable of sorts, I believe. Taking the + and - of the cable and directly touching to those terminals also of the battery while in the phone and force charging. I could be wrong, but that's what I understand of it.
That sounds like something I hope I never have to do.
dudsmat, how did it go?
Desktop chargers are cheap....no need to destroy a cable.
Sent from my MB860 using Tapatalk 2
upndwn4par said:
dudsmat, how did it go?
Click to expand...
Click to collapse
Today I'll use a universal charger and then do the RSD process you told me.
I hope it works.
Thank you upndwn4par and all of you guys so far.
Well, I've got another problem.
My battery is ruined and stuffed. I'll have to buy a new one.
You are really having a bad week. Sorry to hear it!
Hi
Please assist in this regard, I rooted my device and installed Rom Manager, and tried to flash MIUI Rom. My devices rebooted but were stuck on the Moto boot screen. I tried system recovery by holding down volume+- & power button, and it indicated my device were locked. My battery is flat and I'm unable to charge the battery at all. firmware 65.1.40.XT910.MERetail.en.06 Android Ver : 2.3.6. How do I get my device to work again amd where can I find the original Rom to flash with RSD lite ???
You feedback would be much appreciated.
Regards.
http://forum.xda-developers.com/showthread.php?t=1539192
This should get you started. You can try an old school battery pull (yes it is possible to remove the back, just have to pry like hell)
EDIT: Found a video on youtube for exactly this scenario.
http://m.youtube.com/#/watch?featur...ch?v=QfT2Bejkcdk&feature=youtube_gdata_player
Good luck mate
Sent from my XT912 using xda premium
Team black hat adapter
shop.teamblackhat.info/Factory-Adapters-motadapt.htm
I recommend getting a tbh adapter. It lets you power the phone directly from USB even with a dead battery. After that you need to use RSD liter or a similar tool to fastboot he phone back to stock.
Resolved Problem !!!
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Bricked Razr XT910
My razr xt910 is bricked,whenever i turn it on it goes to fastboot with the following message:Ap Fastboot Flash Mode (flash failure)
Battery Low(No matter how much i hcarge it) ,Please Need Help,
Bought From London
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
lol... Am I high or did you just shoved 5v on your Razr 3.7v battery directly from the usb port?
please help me,the razr is bricked ,it says locked and rsd is not detecting it,ive been trying to unbrick for the last 4 hours.pleas help
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
Your picture inspired me so I just made a factory cable, pretty easy.
Bricked MOTOROLA xt910s
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
usman.yousaf said:
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
Click to expand...
Click to collapse
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Need Solution of bricked MOTO XT910S
我顶你个肺隔膜 said:
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
usman.yousaf said:
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
Click to expand...
Click to collapse
Maybe english is too bad to explain this..
http://pan.baidu.com/share/link?shareid=1379604126&uk=4010743545
Rember to wipe your Cid first.
Download this,extract all the files content inside to where your extraxted EU Fastboot file is.And run the 运行我.bat,this will flash the EU ROM to your phone.This thing may damge your phone(Im using it with no problem),I wont pay any responsibility to any damge to your data,hardware or anything.
Sent from my XT910 using xda app-developers app
How Did You Do This?
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Daddyoyah said:
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Click to expand...
Click to collapse
Motorola Fastboot/Factory Programming Cables Links
Sent from my XT907 using Tapatalk
Hello,
I've read numerous times about people being able to restore their dead bricked phones. No button combination will get my LG Optimus L9 P769 (T-mobile) to turn on. I think bricked it while trying to complete a carrier unlock. I understand that I can try to restore my phone through either fastboot or kdz. For fastboot, I was able to install the omap driver, but you know how I'm supposed to install a second driver? Well, I can't seem to do that. Maybe I'm doing something wrong? I would love an explanation of how to install the driver a second time. I know I'm doing something wrong, because when I use the fastboot script to flash the xloader and uboat, I just get "waiting for device." Also, if I want to flash a kdz, do I need fastboot drivers? I feel like my success depends on installing the fastboot drivers properly, but my computer and two others would not let me do that.
I'm really new to this stuff, so any help is appreciated! Also, please excuse me if I'm using the terminology incorrectly. Like I said, I'm new to all this.
Thank you in advance!
To install a kdz, you need to be in upgrade mode. Hold the volume up button then connect it to the computer.
Sent from my LG-P769 using XDA Premium 4 mobile app
LaDY Vengeance said:
To install a kdz, you need to be in upgrade mode. Hold the volume up button then connect it to the computer.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What if the phone doesn't turn on? Does it still go into upgrade mode?
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
LaDY Vengeance said:
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok thanks! I shall try later!
Did it work? I think you should Do fastboot.. that's what I used when mines didn't power on..
Sent from my LG-P769 using XDA Premium HD app
Linux
Get a live linux distribution and try this:
http://vincenzoml.blogspot.it/2013/08/lg-l9-unbrick-script.html
LaDY Vengeance said:
Yes.
Sent from my LG-P769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello,
So I finally tried what you said, but it didn't work. Which program should I use to flash the kdz? Also, when I press up, should the phone have the battery inserted or not? When I tried the KDZ Updater, it said phone was not found.
simfate said:
Hello,
So I finally tried what you said, but it didn't work. Which program should I use to flash the kdz? Also, when I press up, should the phone have the battery inserted or not? When I tried the KDZ Updater, it said phone was not found.
Click to expand...
Click to collapse
You need to install ICS x and u boot then flash KDZ by offline method.
Nathan.7118391 said:
You need to install ICS x and u boot then flash KDZ by offline method.
Click to expand...
Click to collapse
Hello, I can't get into fastboot. It may be that the phone battery does not have a charge and so the fastboot script does not recognize it when I insert it into the phone after 4 seconds. Could that be a possibility? Because I tried everything, tried many different timings many times, to no avail!
simfate said:
Hello, I can't get into fastboot. It may be that the phone battery does not have a charge and so the fastboot script does not recognize it when I insert it into the phone after 4 seconds. Could that be a possibility? Because I tried everything, tried many different timings many times, to no avail!
Click to expand...
Click to collapse
I was just in the same boat as you and pretty much gave up hope but finally got fastboot working and flashed ics x and u and bam it worked like a charm on offline flash method. You just have to pit usb cable in phone w/o battery in and go to device manager. When you see it popup under other devices right click and press install driver. Make sure you have electronic signatures disabled or it will give a error and not install. This is what prevented me from getting it to work the first 100 times! Now run CMD. TYPE CD C:/FASTBOOT < OR C:/ W/E FOLDER NAME IT IS. THEN RUN START.BAT. < OR W/E THE .BAT FILE INSIDE YOUR FILE IS NAMED. Now press enter. It should prompt to plug in phone. I put my battery in as soon as plugged in and it worked. Now Choose option 5. Let it do its thing. Now go reinstall driver as done before to be safe. Then remove your battery. Hold volume + button and plug usb in. S/W upgrade mode should come up. Slide your battery in and proceed to the offline flash method to flash you kdz file. Should be alive again! Mine was tricky going into sw upgrade mode. Sometimes it came right up then sometimes it took 4 or 5 tries so dont give up! Goodluck and you can do it! I almost gave up I felt so hopeless about getting it to work then it finally worked like a charm!
lwg45714 said:
I was just in the same boat as you and pretty much gave up hope but finally got fastboot working and flashed ics x and u and bam it worked like a charm on offline flash method. You just have to pit usb cable in phone w/o battery in and go to device manager. When you see it popup under other devices right click and press install driver. Make sure you have electronic signatures disabled or it will give a error and not install. This is what prevented me from getting it to work the first 100 times! Now run CMD. TYPE CD C:/FASTBOOT < OR C:/ W/E FOLDER NAME IT IS. THEN RUN START.BAT. < OR W/E THE .BAT FILE INSIDE YOUR FILE IS NAMED. Now press enter. It should prompt to plug in phone. I put my battery in as soon as plugged in and it worked. Now Choose option 5. Let it do its thing. Now go reinstall driver as done before to be safe. Then remove your battery. Hold volume + button and plug usb in. S/W upgrade mode should come up. Slide your battery in and proceed to the offline flash method to flash you kdz file. Should be alive again! Mine was tricky going into sw upgrade mode. Sometimes it came right up then sometimes it took 4 or 5 tries so dont give up! Goodluck and you can do it! I almost gave up I felt so hopeless about getting it to work then it finally worked like a charm!
Click to expand...
Click to collapse
I have a question, can a computer detect the phone with the battery in it? Like the omap4430 usb device? Because for me, the computer detects it whether the battery is in or not... both ways.
simfate said:
I have a question, can a computer detect the phone with the battery in it? Like the omap4430 usb device? Because for me, the computer detects it whether the battery is in or not... both ways.
Click to expand...
Click to collapse
Yes it will detect it. However you need to install the omap in two different locations for it to work.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
Yes it will detect it. However you need to install the omap in two different locations for it to work.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
simfate said:
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
Click to expand...
Click to collapse
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in.
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
simfate said:
The problem is, I can't install the driver in the second location because it doesn't come up in device manager.. I was thinking maybe there's a problem with the battery, like it doesn't have a charge or something. Because when I run fastboot it doesn't detect the battery no matter what timing I used. I tried everything. If I use the old fastboot script and I get to "fastboot? y or N" and I enter y, it keeps asking the same question.
Click to expand...
Click to collapse
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in, this should make the driver pop up.
kuma82 said:
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in.
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
Have you read my post about enabling hidden/inactive devices in device manager?
If you havent you should read it and if you have
When the inverted fastboot pops up (on your phone) remove the usb and place it back in, this should make the driver pop up.
Click to expand...
Click to collapse
Yes, i've read that post (I think I've read everything on xda related to fastboot!) I don't get an inverted fastboot on the phone's screen. My phone doesn't turn on at all.. Like I said, I'm still struggling to get into fastboot.
Could be a problem with the battery? I'm going to get an external battery charger and try charging the battery.
simfate said:
Yes, i've read that post (I think I've read everything on xda related to fastboot!) I don't get an inverted fastboot on the phone's screen. My phone doesn't turn on at all.. Like I said, I'm still struggling to get into fastboot.
Could be a problem with the battery? I'm going to get an external battery charger and try charging the battery.
Click to expand...
Click to collapse
How did your device get in this state? Depending on what happened your device may not be fixable.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
How did your device get in this state? Depending on what happened your device may not be fixable.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It died after I plugged it into the computer. I never rooted it and has the stock software. Before dying I also carrier-unlocked it using a cheap code from ebay.