I've searched the forum for a sollution to no avail and since I can't post this in the actual ZMOD 003 thead (low post count) I was wondering if anyone else is having the same problem?
When I start up the Wifi on my X10 I am just met with "Error".
I've reflashed and fully re-installed the .71 baseband, ROM and 003 update and this had happened each time (after first phone reboot I think).
I'm otherwise really pleased with the ROM (full camera, 6+ days battery, etc), is there a sollution?
SOLVED: Downgrade busybox to 1.17.1 (re-install by the andriod installer back to the older version) and reboot.
Assuming you have a custom kernel ... After flashing the cm7 zmod rom, try flashing the wifi modules to match your kernel, then reboot phone and wifi should work.
Had this problem on a few of the roms I've tried, got into the habit of installing the wifi modules immediately after installing any rom I try, before rebooting into the new rom for the first time.
Sparhawk
u can also try it with static ip.
Z3US911 said:
u can also try it with static ip.
Click to expand...
Click to collapse
It's not that it won't connect but the Wifi won't turn on no matter what I try. I've tried this anyway but with no sucess.
Sparhawk76 said:
Assuming you have a custom kernel ... After flashing the cm7 zmod rom, try flashing the wifi modules to match your kernel, then reboot phone and wifi should work.
Had this problem on a few of the roms I've tried, got into the habit of installing the wifi modules immediately after installing any rom I try, before rebooting into the new rom for the first time.
Sparhawk
Click to expand...
Click to collapse
Ok thats sounds like some good advice. Noob question but where could I get the wifi modules for zdzihu's custom kernel? Or do you mean flash the default wifi modules? Also do I just install them through xrecovery, I'm a little lost?
Seems like I'm not the only one having this problem:
http://forum.xda-developers.com/showthread.php?t=1135475&highlight=zKernel+wifi+module&page=81
help anyone, im lost without my wifi.
edit:
Busybox seems to be the issue, I downgraded from 1.19.2 (i think) back to 1.17.1 and the wifi went straight back to working on reboot.
Problem seems to be solved, for now. I now have the perfect ROM.
I posted a couple days ago about some issues with rooting my phone, which I solved, but now I have some new issues. When I went to turn on bluetooth, it wouldn't turn on, just try to turn on for a couple seconds and then nothing. I tried turning on wifi, and it would go straight to showing 'error' under wifi. So, I tried a different rom beast 2.3, and being at work, I can't connect the phone to my comp (encryption issues) so I only had a copy of the rom, not a kernel. Once I had beast installed I lost my network too! so I couldn't connect to my provider's network. I wiped everything, brought back AR 1.1, and am currently without bluetooth, wifi, and network. When I scan for networks my telus network shows up, as well as bell, rogers etc.
Is this a kernel issue? As soon as I get home that's the first thing I'll be trying out
andy55 said:
I posted a couple days ago about some issues with rooting my phone, which I solved, but now I have some new issues. When I went to turn on bluetooth, it wouldn't turn on, just try to turn on for a couple seconds and then nothing. I tried turning on wifi, and it would go straight to showing 'error' under wifi. So, I tried a different rom beast 2.3, and being at work, I can't connect the phone to my comp (encryption issues) so I only had a copy of the rom, not a kernel. Once I had beast installed I lost my network too! so I couldn't connect to my provider's network. I wiped everything, brought back AR 1.1, and am currently without bluetooth, wifi, and network. When I scan for networks my telus network shows up, as well as bell, rogers etc.
Is this a kernel issue? As soon as I get home that's the first thing I'll be trying out
Click to expand...
Click to collapse
yes its a kernel issue. what version of software are you running?
I had the wifi error issue, and i flashed the kernel on top of the rom and it works now
Depending on the ROM you flashed, it may or may not display "Flash Kernel after." In which then you flash it. This'll take care of all Bluetooth and Wi-Fi Issues!
If you're having issues let me know.
I had the same issue I was using stock kernel for tmobile version 1.36.531.6 on mine which I had over the air updated to 1.43.531.3. This created the wifi error and bluetooth issue, I had to try different kernels to try to figure this thing out...It will posted in my read me page when I get a chance
It's a kernel issue, there are actually three different kernels, not two, I posted this in xboarders thread, but He hasn't updated his page.
kernels
1: for tmobile software stock 1.43.531.3, this is not available anywhere on the amaze forums, i had to personally extract this from the rooted stock rom that xboarder provided
2: for tmobile software stock 1.36.531.6 and 1.36.531.5 and lower, this stock i believe is the one xboarder has up as the original boot.img
3: faux's custom kernel, this kernel will work with all versions i believe
no luck, flashed faux kernel 3x's and still same problem.
Any other ideas on what it could be?
I get a signal for the phone, no 4g icon, same error with wifi, and nothing with bluetooth or network.
andy55 said:
no luck, flashed faux kernel 3x's and still same problem.
Any other ideas on what it could be?
I get a signal for the phone, no 4g icon, same error with wifi, and nothing with bluetooth or network.
Click to expand...
Click to collapse
you need to help me help you. I ask you again what software version are you on???? go to settings>about phone>software information and look at software version, let me know which you're on.
second: what rom are you running?
you have to answer these two questions
andy55 said:
I posted a couple days ago about some issues with rooting my phone, which I solved, but now I have some new issues. When I went to turn on bluetooth, it wouldn't turn on, just try to turn on for a couple seconds and then nothing. I tried turning on wifi, and it would go straight to showing 'error' under wifi. So, I tried a different rom beast 2.3, and being at work, I can't connect the phone to my comp (encryption issues) so I only had a copy of the rom, not a kernel. Once I had beast installed I lost my network too! so I couldn't connect to my provider's network. I wiped everything, brought back AR 1.1, and am currently without bluetooth, wifi, and network. When I scan for networks my telus network shows up, as well as bell, rogers etc.
Is this a kernel issue? As soon as I get home that's the first thing I'll be trying out
Click to expand...
Click to collapse
I told you rooting is not for you but you thought I was attacking you. But seriously if you do not know what you are doing you will mess up the phone. you still havent because there still is no s-off so pretty much your phone is kinda locked
seansk said:
you need to help me help you. I ask you again what software version are you on???? go to settings>about phone>software information and look at software version, let me know which you're on.
second: what rom are you running?
you have to answer these two questions
Click to expand...
Click to collapse
Aren't your 2 questions the same? Just asking because when you go into software information there is no listing for software version, only software number which displays the name of the Rom you are running. Which would make it answer to both of your questions.
To the Op, are you sure the kernel flashed correctly when you flashed fauxs kernel? Did you use the EFK to flash it or did you try and flash it through CWM? Go into software information and tell us what it says under kernel
sent from my Bulletproof Amaze w/faux .008 kernel
aj_2423 said:
Aren't your 2 questions the same? Just asking because when you go into software information there is no listing for software version, only software number which displays the name of the Rom you are running. Which would make it answer to both of your questions.
To the Op, are you sure the kernel flashed correctly when you flashed fauxs kernel? Did you use the EFK to flash it or did you try and flash it through CWM? Go into software information and tell us what it says under kernel
sent from my Bulletproof Amaze w/faux .008 kernel
Click to expand...
Click to collapse
Yes you are correct I'm just trying to make sure what he's running so I can provide him the right kernel file to flash!
seansk said:
Yes you are correct I'm just trying to make sure what he's running so I can provide him the right kernel file to flash!
Click to expand...
Click to collapse
lol ok. but the thing is, is that he said he flashed faux's kernel and the stuff still didn't work, which it should no matter what rom hes running, unless of course he was running a sense 3.5 rom which im sure hes not from reading his posts. this is why i'm assuming he did not flash the kernel correctly... wouldnt u agree? we'll see when he finally posts what it says in his software information for what Rom hes running and what it says his Kernel is.
sent from my Bulletproof Amaze w/faux .008 kernel
aj_2423 said:
lol ok. but the thing is, is that he said he flashed faux's kernel and the stuff still didn't work, which it should no matter what rom hes running, unless of course he was running a sense 3.5 rom which im sure hes not from reading his posts. this is why i'm assuming he did not flash the kernel correctly... wouldnt u agree? we'll see when he finally posts what it says in his software information for what Rom hes running and what it says his Kernel is.
sent from my Bulletproof Amaze w/faux .008 kernel
Click to expand...
Click to collapse
yes lets wait, with people with lets experience, I tend to dumb things down when asking questions...I am not doing it to demean them, but It's the only way to get any real good answers and being able to help them. Then over time they'll learn
sean, I was running the android revolution 1.1, and tried a couple different kernels and nothing
But I ended up fixing the issue finally. The super wipe zip file I downloaded with AR 1.1 was corrupt, and wouldn't load properly, so I was installing a rom without doing a wipe every time. So, I put a working copy of the zip on the sd card, and did a manual wipe of the caches, re-installed AR 1.1 and all is well.
So, even though I was following all necessary steps, I failed to realize that the wipe zip was faulty, and really messed everything up, and when I changed the rom again to beastmod, I didn't install the correct kernel with it, so yet more issues.
Happy to say that it's all over, and I have a much faster phone with alot less bloat on it. Thanks to everyone!
aj_2423 said:
lol ok. but the thing is, is that he said he flashed faux's kernel and the stuff still didn't work, which it should no matter what rom hes running, unless of course he was running a sense 3.5 rom which im sure hes not from reading his posts. this is why i'm assuming he did not flash the kernel correctly... wouldnt u agree? we'll see when he finally posts what it says in his software information for what Rom hes running and what it says his Kernel is.
sent from my Bulletproof Amaze w/faux .008 kernel
Click to expand...
Click to collapse
Flashed the kernel as xboarder showed in his thread and video.
I am having trouble connecting to my router at home...Idk why this is happening, it was working fine on the stock 4.1.2 rom but ever since I updated to cm11 nightly (tuesday march 10, 2014), I cannot connect to my wifi.....Any help?!?!
why are people overlooking my thread?!?! I really need to fix this
AlainFarqy said:
I am having trouble connecting to my router at home...Idk why this is happening, it was working fine on the stock 4.1.2 rom but ever since I updated to cm11 nightly (tuesday march 10, 2014), I cannot connect to my wifi.....Any help?!?!
Click to expand...
Click to collapse
This is a ROM problem (I have this problem too) so don't worry about your device. I'd recommend switching to ParanoidAndroid (where WiFi works) and connecting to your network, then flashing back to CM11. If you care about data then make a Nandroid backup and after reinstalling CM do advanced restore and just restore data.
Step-by-step:
1. Download PA 4.4.2 (in the Original Android Development forums for this device)
2. Reboot into recovery
3. Full backup
4. Wipe, and install PA as per the instructions on the original post in the PA thread
5. Boot into PA, set up, connect to WiFi
6. Boot into recovery
7. Install CM11 but don't wipe. This is a little risky but mostly you shouldn't have a problem, since you haven't done anything on PA . 99% of the time you can restore to a backup if anything goes wrong.
8. (Optional) In the recovery choose advanced restore and restore data ONLY. this will restore your original apps and shouldn't cause any problems since the apps are originally from the same CM11 environment.
Hope I helped.
I having wifi problem with cm11 and PA too. I've flashed many radio file but it didnt work. i can connect to wifi after flashed radio but it stop download after a while, althought it still connect to wifi
xike456 said:
I having wifi problem with cm11 and PA too. I've flashed many radio file but it didnt work. i can connect to wifi after flashed radio but it stop download after a while, althought it still connect to wifi
Click to expand...
Click to collapse
If this is your problem, and flashing a radio works for a while, then try more radios. There are a few lists of hybrid radios in the general area for the e970. Though, I doubt this is a radio problem as when the stock ROM is flashed WiFi works with pretty much any radio, so I find it somewhat weird that using a new radio fixes the issue for you.
Sent from my LG-E970
I need more details. What do you mean by cannot connect? What happens? Please post a logcat of trying to connect.
Sent from my LG-LS970 using xda app-developers app
Shelnutt2 said:
I need more details. What do you mean by cannot connect? What happens? Please post a logcat of trying to connect.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Same is happening with me(CM11 M4)
when i turn on the wifi it scans n shows all the available networks.
when i select mine to connect, as usual it asks password.
after entering password; all that happens is it shows "saved" in wifi list.
nothing else happens.
i have tried connecting all types of wifi networks.
Also on the same line, i cant start the Wifi hotspot as well
after clicking on Portable hotspot it keeps on showing "Turning hotspot on..." for infinity.
I was also having wifi issues. For me, it was because my phone still had the ICS radios. Once I flashed the JB radios everything started working great. maybe that is your issue?