well idk what i did..... let me explain photon was on cricket working perfect. downloaded elixar to view special properties but didnt change anything. also downloaded beats audio.. keep in mind phone is not rooted... its stock except for the different prl for cricket. phone had an update to 2.3.5 i went ahead and did that. beats audio had update did that too... reset phone and now beats audio is working without root.... was looking around in elixar and after i exited i lost radio and instead of saying sprint for service it say searching or no service.... reverted back to the old sprint prl still no service or bars. was going to follow your downgrade tutorial from 2.3.5 to 2.3.4 thru rsd lite 5.5 and it says fail phone cannot re-enumerate after RAM downloader sent and the phone reads (SVF: 106:1:2 sec_exception: b655, eddc, eb) can u help me... i want it back to sprint default so i can subscribe to sprint service. thanks btw wifi doesnt like to turn on every once in awhile says error.
phone info:
system ver: 45.4.13.MB855.Sprint.en.us
android ver: 2.3.5
baseband ver: N_01.29.10R
kernel ver: 2.6.32.9 [email protected] #2
build #:4.5.1A-1_SUN-254_13
under phone status it says
network: unknown
mobile network type: unknown
service state: out of service
I don't understand it much, so you can still boot normally, but have no service?
peetr_ said:
I don't understand it much, so you can still boot normally, but have no service?
Click to expand...
Click to collapse
Yes boots fine into 2.3.5 but its like theres no radio... it just shows empty bars wi th red x thru it
spazik697 said:
well idk what i did..... let me explain photon was on cricket working perfect. downloaded elixar to view special properties but didnt change anything. also downloaded beats audio.. keep in mind phone is not rooted... its stock except for the different prl for cricket. phone had an update to 2.3.5 i went ahead and did that. beats audio had update did that too... reset phone and now beats audio is working without root.... was looking around in elixar and after i exited i lost radio and instead of saying sprint for service it say searching or no service.... reverted back to the old sprint prl still no service or bars. was going to follow your downgrade tutorial from 2.3.5 to 2.3.4 thru rsd lite 5.5 and it says fail phone cannot re-enumerate after RAM downloader sent and the phone reads (SVF: 106:1:2 sec_exception: b655, eddc, eb) can u help me... i want it back to sprint default so i can subscribe to sprint service. thanks btw wifi doesnt like to turn on every once in awhile says error.
phone info:
system ver: 45.4.13.MB855.Sprint.en.us
android ver: 2.3.5
baseband ver: N_01.29.10R
kernel ver: 2.6.32.9 [email protected] #2
build #:4.5.1A-1_SUN-254_13
under phone status it says
network: unknown
mobile network type: unknown
service state: out of service
Click to expand...
Click to collapse
Do a complete wipe, then update to the latest software, if you already have the latest update then just wipe and wipe dalvik cache too.
Sent from my Nexus S using xda app-developers app
Yes, try to wipe first.
peetr_ said:
Yes, try to wipe first.
Click to expand...
Click to collapse
How? i did a factory reset.... but phones still locked and stock bootloader. no cwm installed
Factory reset done and still nothing...
That sbf experiment was not a good idea.
You tried changing network in mobile settings?
Try to enter *#*#4636#*#* in the dialer - phone info - change network here.
peetr_ said:
Factory reset done and still nothing...
That sbf experiment was not a good idea.
You tried changing network in mobile settings?
Try to enter *#*#4636#*#* in the dialer - phone info - change network here.
Click to expand...
Click to collapse
Nogo guys..... sprint apns are in tackt sprint doesnt even show on locked screen.... radio firmware unknown..... its like radio doesnt exist.... now that it updated to 2.3.5 bootloader is now unknown.... and according to some forums i read this update prevents downgrading to previous ver..... anyway to completely and fully wipe everythkng off phone and start from scratch.... lol prolly not likely
Didn't you played with /system/lib/libmoto_ril.so?
I can give you radio in sbf format, i, but you may loose 4g.
You can also try reflashing the radio
Sent from my Nexus S
I need it PLEASE !!!
peetr_ said:
Didn't you played with /system/lib/libmoto_ril.so?
I can give you radio in sbf format, i, but you may loose 4g.
Click to expand...
Click to collapse
Could you send me the file ? i need it!! please ...i have not working wifi.
my email is: [email protected]
THANKYOU.
Related
Good night.
I've flashed with no problems the Telstra 1.4.2 Radio N_01.87.00R radio in the past. I wanted to try the OLYLA_U4_0.50.0_R03 radio (Retail Brazil) but I can't make a working SBF.
If I try to compile it with desbf.exe or Moto Android (De)packer 1.3 when I try to flash I get a sec_exception: febe, 35, 35 error.
I tought it was something related to the ram downloaders. So I used all the 4.1.8.3 CG5 files (cefs.mbn, dbl_sec.mbn, firmware.hmg, firmware.xml, osbl_sec.mbn, partition.mbn, RDL1.smg, RDL3.smg) except amss_sec.mbn wich under my understand its the radio.
Then when I try to flash the sbf I get a e003003f error in RSD Lite.
I ended flashing the Telstra 1.4.2 Radio N_01.87.00R again, since I couldn't flash the Brasil one, nor the N_01.92.00R radio.
Only reason I want to try the Retail Brazil radio is that is that Argentina carriers usually import Motorola phones from Brazil. So the radio of this rom should work in my phone much better than the Telstra one (in theory), since its developed for my area.
I will appreciate if someone can point me in the right direction.
Thanks in advance.
Is your Atrix come from AT&T or Bell or Stock
Sam
sammm said:
Is your Atrix come from AT&T or Bell or Stock
Sam
Click to expand...
Click to collapse
Sorry, I forgot to mention it. Its an AT&T one.
Thanks, I have a AT&T Atrix as well. Been having some problem trying to place call to a Telstra T3020 Android. That was the only phone I have problem calling so far. When in call connection, it shows connected but there are no audio at all what so ever. connection is stuck can't hang up call. Eventually the Atrix reboot itself.
I will try flashing the new radio see if this is gona fix me problem.
PS: I have download the 1.4.2 radio and it's full sbf file today. I'm temped but not game enough to flash it. It only report working on the Bell's Atrix.
Sammm
sammm said:
Thanks, I have a AT&T Atrix as well. Been having some problem trying to place call to a Telstra T3020 Android. That was the only phone I have problem calling so far. When in call connection, it shows connected but there are no audio at all what so ever. connection is stuck can't hang up call. Eventually the Atrix reboot itself.
I will try flashing the new radio see if this is gona fix me problem.
PS: I have download the 1.4.2 radio and it's full sbf file today. I'm temped but not game enough to flash it. It only report working on the Bell's Atrix.
Sammm
Click to expand...
Click to collapse
There's a topic in the development section with a sbf for the AT&T Atrix. Its not a full sbf, just the radio. I'm using it and it works fine.
Hi Whipon
I have try to flash the 1.4.2 radio sbf. It come up error on the phone :
" sec_exception: febe, 35, 35 .. RSD Lite report fail "
What method did you use to get it working??
Sammm
sammm said:
Hi Whipon
I have try to flash the 1.4.2 radio sbf. It come up error on the phone :
" sec_exception: febe, 35, 35 .. RSD Lite report fail "
What method did you use to get it working??
Sammm
Click to expand...
Click to collapse
There's a two topics with that radio, the most recent one is the one for the Atrix.
Back on topic, can anyone, please, tell me how can I flash the Retail Brazil radio to my phone?.
Thanks to NFHimself I managed to make a working SBF.
I used desbf to delete everything but RDL1, RDL3 and CG5 then replaced CG5 with the radio I wanted.
With the Retail Brazil radio, I don't have internet access. Can't understand why since I have the 3G connectivity icon in the status bar and in the info menu it says I'm on UMTS. I also have the signal meter full.
Similiar behaviour with the 4.2.1.1 radio, but this one only gives me one signal bar.
I wanted to try the other Brazilian radios, but I'm almost sure they will not work.
So it seems the only working radio with AT&T Atrix (other than the AT&T ones) its the Telstra 4.1.4.2 one. I had to reflash it, since the other two radios doesn't work.
Now I'll have to find a working radio wich gives me HSPA. At the moment I only get UMTS.
Whipon said:
Thanks to NFHimself I managed to make a working SBF.
I used desbf to delete everything but RDL1, RDL3 and CG5 then replaced CG5 with the radio I wanted.
With the Retail Brazil radio, I don't have internet access. Can't understand why since I have the 3G connectivity icon in the status bar and in the info menu it says I'm on UMTS. I also have the signal meter full.
Similiar behaviour with the 4.2.1.1 radio, but this one only gives me one signal bar.
I wanted to try the other Brazilian radios, but I'm almost sure they will not work.
So it seems the only working radio with AT&T Atrix (other than the AT&T ones) its the Telstra 4.1.4.2 one. I had to reflash it, since the other two radios doesn't work.
Now I'll have to find a working radio wich gives me HSPA. At the moment I only get UMTS.
Click to expand...
Click to collapse
I was having problems with the stock At&t 4.1.83 radio here in ecuador. I also tried the Telstra and works better but sometimes I loose the conection and my ping times are very bad.
Could you please upload the brazilian Atrix radio, I would like to give it a try
josuetenista said:
I was having problems with the stock At&t 4.1.83 radio here in ecuador. I also tried the Telstra and works better but sometimes I loose the conection and my ping times are very bad.
Could you please upload the brazilian Atrix radio, I would like to give it a try
Click to expand...
Click to collapse
I will upload it when I arrive home.
Be advised you'll lose internet conectivity with it if you flash it on an AT&T Atrix.
did u try to manualy type in the APNs?
shadowjack1 said:
did u try to manualy type in the APNs?
Click to expand...
Click to collapse
The apn never got deleted. It remains there. I've flashed several radios and never had to reenter the apn again. As I said, phone shows 3G.
I've uploaded the SBF in case someone wants to try it.
Its in this topic.
Remember this will only work on an AT&T Atrix.
Brazil radio
Hi i'm from Brazil, and i change my radio and it's drops 3g.
Where i found Brazi radio OLYLA_U4_0.50.0_R03 radio to download?
Thanks!
I had the same problem on my atrix where it would just try to connect and then reboot. i flashed Radio 01.8700r and it works fine, of course you will have to insert the apn in manually
I just down-grade to 2.2, with Rommanager, to what i have saved before upgrading to 2.3.3, official.
My 2.2 is also official, just rooted.
But now it did not find a phone network, no service availabile.
I tried again to restore (manage and restare).
I checked with another sim, the same.
My sim on other phone was ok.
After hard reset i got a message:
com.android.settings has stopped unexpectedly.
Did you downgrade with KDZ?
DigitalAnalog said:
Did you downgrade with KDZ?
Click to expand...
Click to collapse
He just said he downgraded via ROM Manager. PEBKAC.
@OP: You will have no GSM until you downgrade the baseband. Kindly check my v20g thread!
lori_2001 said:
I just down-grade to 2.2, with Rommanager, to what i have saved before upgrading to 2.3.3, official.
My 2.2 is also official, just rooted.
But now it did not find a phone network, no service availabile.
I tried again to restore (manage and restare).
I checked with another sim, the same.
My sim on other phone was ok.
After hard reset i got a message:
com.android.settings has stopped unexpectedly.
Click to expand...
Click to collapse
Follow http://forum.xda-developers.com/showthread.php?t=875881this thread and make sure while you are updating your ROM, Rom should be for your country specified. Without this GSM will not work.
thanks in advance, i will.
I tried with the zip for phone, does not work.
So i have to come back to 2.3.3. Now i have phone.
I wanted to down grade because Maps are running every time i turn on gps, and igo is not working corectly ( the voice has interrupts).
Now i'm sticked to 2.3.3.
Thanks for your help and answers.
lori_2001 said:
I tried with the zip for phone, does not work.
So i have to come back to 2.3.3. Now i have phone.
Click to expand...
Click to collapse
Dunno what you tried really. You are supposed to reflash the baseband from 2.2.x.
I flashed the baseband, but doesn't worked.
I used kdz to downgrade from 2.3 to 2.2 (v10b_00.kdz), and it is everythin ok, inclusive phone.
Not the same as what Noob4Life is posting.
First of all, I'm in the UK and was running the stock 2.2 or whatever was the stock was for Orange in the UK a month back, until I finally decided to upgrade to CM7.
A few weeks went by, all was awesome. Until last week my Wifi stopped working, my bluetooth stopped working and my Mobile hotspot stopped working. And looking around on a few posts on here, it seems that it is hardware based.
So what I'm asking is, does anyone know of a way I can go back to the stock 2.3 that has just been released in the UK? So it seems like I never did anything to the phone and then I can see if it is infact hardware, or software based. So if it is hardware related, I'm hoping I'll be able to get a free repair / replacement, as I have insurance. But from what I've seen, it will cost me if I take it in with CM7 on.
Thanks for any help anyone is able to provide.
piemanpm said:
Not the same as what Noob4Life is posting.
First of all, I'm in the UK and was running the stock 2.2 or whatever was the stock was for Orange in the UK a month back, until I finally decided to upgrade to CM7.
A few weeks went by, all was awesome. Until last week my Wifi stopped working, my bluetooth stopped working and my Mobile hotspot stopped working. And looking around on a few posts on here, it seems that it is hardware based.
So what I'm asking is, does anyone know of a way I can go back to the stock 2.3 that has just been released in the UK? So it seems like I never did anything to the phone and then I can see if it is infact hardware, or software based. So if it is hardware related, I'm hoping I'll be able to get a free repair / replacement, as I have insurance. But from what I've seen, it will cost me if I take it in with CM7 on.
Thanks for any help anyone is able to provide.
Click to expand...
Click to collapse
I had that problem with cm7...so thought it was my phone. Tried a different rom....worked again...tried cm7 again. And it started working.....just reflash.....obviously wipe it.
Sent from my MB860 using xda premium
Like Sexywacko said, first try out a fruitcake or another rom - best to take the new AT&T with the corresponding radio found here.
If it still doesn´t work, try another one. If all goes bad, you have to get the SBF from the OrangeUK GB-Update found here - extract the system, boot and webtop + the radio and fastboot flash those. This comes as close to stock as you can get without using SBF+RSDlite...This post will help you.
And don´t be afraid - I read on multiple occasions, that people had no problem getting their unlocked/rooted devices repaired without any waranty-problems. Just don´t tell them!
Thanks for the help guys.
Just put Fruitcakes "2.3.5 System and Boot NO Webtop" on, and turning wifi on is still causing " error " and causing a reboot.
How do I install new radio things? I'm a complete noob at this, and only put Cyanogenmod on using a guide ( http://forum.xda-developers.com/showthread.php?t=1336232 )
And now it's stuck rebooting all the time because it's trying to turn Wifi on.
Flash the 36P radio from the Fruitcakes thread through CWM in the same way you flashed 2.3.5. Remember to wipe cache first in CWM.
Well installing the 36p seems to have done the trick. Thanks alot dude!
Updated to Fruit Cakes 2.3.5 System and Boot NO Webtop with ATT 1.77-36p radio. Seems to have fixed the problem.
Don't want to risk putting Cyanogen back on incase it stops working again.
Thanks for your help again guys
piemanpm said:
Updated to Fruit Cakes 2.3.5 System and Boot NO Webtop with ATT 1.77-36p radio. Seems to have fixed the problem.
Don't want to risk putting Cyanogen back on incase it stops working again.
Thanks for your help again guys
Click to expand...
Click to collapse
I am using CM7 weekly #3 with Faux stopgap+ 1.0GHz kernel and 36P radio with no issues. Works very well for me.
It's stopped working again. Stupid thing. Going to try and restore it to stock orange ROM and see if that fixes it.
Anyone able to help?
Think I'm just going to give up and " Accidently " drop my phone in the bath and claim on insurance. This having no wifi is doing my head in. I've tried CM7 with " ATT .91 Radio " and " ATT 1.77-36p " radios. And I've tried Fruitcakes 2.3.5 System and Boot NO Webtop with " ATT .91 Radio " and " ATT 1.77-36p " radios and still no success in getting wifi to work for over 2 hours without crashing my phone / not working again.
Motorola Phone Tools isn't picking my phone up properly, it's just picking up my IMEI number, not my Carrier or Model.
Must say I'm at my wits end.
Its obviously. A hardware issue do. A insurance clame. On it cause it sours like the radio is broken
Sent from my MB860 using xda premium
I'm afraid it's looking that way.
Well I've decided to try RSD as my last resort to try and get my phone wifi working. I unlocked the bootloader and installed cyanogen using this Guide. I then put Fruitcakes 2.3.5 System and Boot NO Webtop on and the radio mentioned in this Thread with little success at getting it fully working.
My phone info ATM:
System Info
4.5.133.MB860.ATT.en.US
Android Version
2.3.5
Baseband version
N_01.77.36p
Kernel version
2.6.32.9 [email protected] #2
Build number
4.5.133
I'm thinking of using this: http://forum.xda-developers.com/showpost.php?p=19657465&postcount=248
What I'm asking is, realistically, what is the chance of bricking?
Looking to do the same, currently unlocked and rooted running CM7.
Is it possible to install the official 2.3.4 orange UK and have it locked with root access removed?
arukanferu said:
Looking to do the same, currently unlocked and rooted running CM7.
Is it possible to install the official 2.3.4 orange UK and have it locked with root access removed?
Click to expand...
Click to collapse
I downloaded the latest RSD and downloaded this image
Booted phone up in RSD mode ( power button + Volume Up ) then plugged it into my computer. Waited for all the drivers to install. Opened RSD, loaded the image and set it going. Do not unplug it at all until it says " Please boot up phone manually " or something along those lines.
Once it'd done it was loop booting, so I booted it into Android Recovery after pulling my battery out ( Power Button + Volume Down ) and then pressed the Volume up and Volume Down buttons together to get the menu up, then chose " Wipe date/Factory reset " and then " Wipe cache partition " and let it boot up again. Didn't solve my Wifi problem though.
Phoned Orange up today, explained that my wifi, bluetooth and hotspot all stopped working and that I'd already done a factory reset and updated to gingerbread. The guy was shocked that I'd basically done everything on his menu to try and solve the problem. They are sending a guy out tomorrow to give me a replacement phone for £25 on my insurance. Winner!
[Q] [Help][Stock AT&T 2.3.4 Build 4.5.91]No network after *#*#4636#*#* > USA Band
Hi guys! Plz help.
I have AT&T Motorola Atrix 4G. Its SIM Unlocked and Bootloader Unlocked as well.
System version: 4.5.91.MB860.ATT.en.US
Android version: 2.3.4
I am using this mobile phone in India and had no problem at all with 2G and 3G networks.
Today I was going through *#*#4636#*#* > Phone Information > Menu > Select radio band > and selected USA Band accidentally. Thereafter I have no GSM network. I tried manual searching of networks and did a Erase data/factory reset in CWM recovery but had no luck. I tried to restore an earlier backup also but due to MD5 Sum Mismatch error I couldn't do it.
Please help me getting my mobile working again. Is there something which can reset radio frequencies of the phone? Any idea what should I do now?
Thanks you so much for your help.
Hey there!
I had same issue a while ago and didn't have unlocked bootloader back then.
I simply re-flashed stock firmware from this thread and everything worked fine. If you do this then make sure you chose right one (For you first one should be right), If you downgrade to 2.2.x you will hard brick your device. Just keep that in mind.
By the way now I'm using [CM7 ROM][24/12] --> Neutrino ROM 1.4-S <-- [53mb] and there in settings you can choose whatever band you like unlike in stock AT&T firmware from *#*#4636#*#* you can chose only USA Band. There must be other roms what support this feature too.
I'm sure there are other ways to fix this issue but this is from my expierence.
Good luck!
PS I did that in first week when I had Atrix and it was my first android device. I managed to fix it, I'm sure you will fix it too
mm166 said:
Hey there!
I had same issue a while ago and didn't have unlocked bootloader back then.
I simply re-flashed stock firmware from this thread and everything worked fine. If you do this then make sure you chose right one (For you first one should be right), If you downgrade to 2.2.x you will hard brick your device. Just keep that in mind.
By the way now I'm using [CM7 ROM][24/12] --> Neutrino ROM 1.4-S <-- [53mb] and there in settings you can choose whatever band you like unlike in stock AT&T firmware from *#*#4636#*#* you can chose only USA Band. There must be other roms what support this feature too.
I'm sure there are other ways to fix this issue but this is from my expierence.
Good luck!
PS I did that in first week when I had Atrix and it was my first android device. I managed to fix it, I'm sure you will fix it too
Click to expand...
Click to collapse
Hi mm166,
Thank you so much for your reply and I do think a re-flash only can fix my mobile. Since I have Bootloader Unlocked so I think I can't use SBF method to flash stock 2.3.4 and I can only go for fruitcakes. I am now downloading ATT 2.3.4 Build 4.5.91 fruitcake and I hope it will fix my mobile
I am woundering if flashing ATT radio .91 from following link will reset the files responsible for holding network settings and can fix my mobile ... but I am not sure so can't go for it
http://forum.xda-developers.com/showthread.php?t=1163009
Update:
I just flashed "2.3.4 System and Boot NO Webtop (Updated Newest Script)" fruitcake after Clear Data/Cache/Factory Reset but still no network
I think I have lost my mobile just because of accidentally setting to USA Band.
Any help please!!!!!
Well, I'm still newbie on Android devices. I'm not very long with Android device but I'll try give you few advices. Keep in mind that I could be somewhere wrong:
I think new script: [Batch/Script] MFBSR - Moto-Fastboot: Stock Restore could help. Worth trying. Fruitcake didn't restore everything.
I used RSD SBF flash and I think it doesn't matter if bootloader is unlocked or not (maybe someone could confirm that?) if you flash same firmware but that's somewhat risky (better don't try this). But I did that and everything worked great.
Other way to fix network issue could be flashing custom rom. For example this. I added screenshot from settings. Edit: No, I think I'm wrong. That's not right thing.
Solved!!!
Hi mm166, thank you so much for your reply
Before reading your message I did a trick and it worked for me. I just flashed ATT Basband/Radio N_01.77.36P FruitCake through Rom Racer's CWM and after reboot my phone was able to find network as it should be
Since my phone's BL was unlocked so I was not supposed to try SBF flashing to prevent it from hard brick. And, just flashing Stock ROM FruitCake was not resetting its radio settings i guess ... and flashing particularly above mentioned radio files just replaced the older one and once again my Atrix started to breath
I hope this may work for other guys too who are facing same kinda problem of not getting network after accidentally setting the radio to USA Band. But a Full Wipe/Factory Rest/Data/Cash/Dalvik Cache Wipe is needed.
Operator: U Mobile (Malaysia)
Rom: 2.3.6(4.5.1.41.MB860.ATT.en.US) flash with CWM using fruit cake rom.
Baseband: N_01.77.36P
Kernal Version: 2.6.32.9 a21`[email protected] #2
Status: Can make call and receive sms. Apn setting is good. Wifi and bluetooth also work fine. Only mobile data state is the problem.
Problem:
1.I got this Atrix last 3 week. When i put a sim card it cannot detect my data so i install TWEAKKER from Play Store and get the setting for my APN. Everything work fine.
2. After a week i unlock the bootloader, install Nottachtrix, and again using TWEAKKER to set my APN, have fun with lapdock (overclock it using faux kernal to 1.45ghz). Everything still work fine.
3. Last 5 days i start play around with Titanium backup and supercharged v6. I backup and remove system application that i think i dont need it. I end up with mess around with the system but since i already made a backup i just restore it to default and then i start notice i lost my data signal.
4. I reflash fresh nottachtrix rom using CWM but the data still disconnected. I try flashing other rom like ICS rom also same problem. And then i flash official rom using CWM (fruit cake method) and RSD method. Still no luck. But today i play around with HiAPN and i can connect to data again but it seem not stable. But i can receive Phone call and sms without problem.
5. I already check my sim card by put it to other phone and i got no problem with it.
Any suggestion what i need to do to make data work again normally?
Update 18 May 2014:
1. I reflash 2.3.4 rom using RSD. Mobile Network State still disconnect. I will buy a new sim with different operator to test either my phone got problem or is it the sim/operator problem. Old but powerfull phone. I hope i got change to use it as daily phone again.
Update 21 May 2014:
Already test with other operator also no luck. Flashing all the radio that i found also no luck. Guessing the hardware got problem but quit confuse because call and sms still can receive.
miogy said:
Operator: U Mobile (Malaysia)
Rom: 2.3.6(4.5.1.41.MB860.ATT.en.US) flash with CWM using fruit cake rom.
Baseband: N_01.77.36P
Kernal Version: 2.6.32.9 a21`[email protected] #2
Problem:
1.I got this Atrix last 3 week. When i put a sim card it cannot detect my data so i install TWEAKKER from Play Store and get the setting for my APN. Everything work fine.
2. After a week i unlock the bootloader, install Nottachtrix, and again using TWEAKKER to set my APN, have fun with lapdock (overclock it using faux kernal to 1.45ghz). Everything still work fine.
3. Last 5 days i start play around with Titanium backup and supercharged v6. I backup and remove system application that i think i dont need it. I end up with mess around with the system but since i already made a backup i just restore it to default and then i start notice i lost my data signal.
4. I reflash fresh nottachtrix rom using CWM but the data still disconnected. I try flashing other rom like ICS rom also same problem. And then i flash official rom using CWM (fruit cake method). Still no luck. But today i play around with HiAPN and i can connect to data again but it seem not stable.
5. I already check my sim card by put it to other phone and i got no problem with it.
Any suggestion what i need to do to make data work again normally?
Click to expand...
Click to collapse
Not a smart advice, use it as last resource:
Find the radio version your phone have and flash it, or simply flash another radio. Be careful, tough as an incorrect version (not all radios work on every atrix) you may end with a nice hi-tech papeweight
andresrivas said:
Not a smart advice, use it as last resource:
Find the radio version your phone have and flash it, or simply flash another radio. Be careful, tough as an incorrect version (not all radios work on every atrix) you may end with a nice hi-tech papeweight
Click to expand...
Click to collapse
I already flash:
a) Radio N_01.77.30P
b) Radio N_01.77.36P
c) Radio N_01.77.37P_usa_att_12dec2011
d) Radio N_01.100.00R
I found all the radio in fruit cakes link except for D. Still no luck. Is it a problem with my phone? I can receive call and sms normally. Only data not work and i believe my APN setting is correct.
Already call my operator services and they also can't help. Today will try another sim card with different operator that i will borrow from my friend to check either i need to upgrade my sim or not.
Still hope to get any expert help from XDA forum
Any expert? I got iPhone and windows phone but nothing can beat this atrix+lapdock.
Atrix 4g connectivity
miogy said:
Any expert? I got iPhone and windows phone but nothing can beat this atrix+lapdock.
Click to expand...
Click to collapse
miogy said:
Already call my operator services and they also can't help. Today will try another sim card with different operator that i will borrow from my friend to check either i need to upgrade my sim or not.
Still hope to get any expert help from XDA forum
Click to expand...
Click to collapse
Hallo miogy,
this is a well known issue,
i am experience the same problem with my atrix 4G,
i recently flash the CM9 of CyanogenMod , (android 4.0.4),
before that i had the 2.3.4 (GB) - in this version my atrix had restart himshelf every day.
on the current version (CM9), i experiencig strange things with the Network.
this is not only us that experiencig that - it is a very common and wide .
its called RIL bug (RIL --> Radio Interface Layer),
my phone can work fine 2 or 5 ot 8 hours, and suddenly the data connection disconnected.
i even once had connected to a Mobile Carrier that is not mine.
as much as i understand till now, this RIL bug is caused of a bug in the Kernel, adn the best guys here in the XDA, are trying to solve it.
i am waiting to this solution very much, because this atrix 4g is great phone, and i like the CM9 also.
you can see for example this thread:
http://forum.xda-developers.com/showthread.php?t=2603032