can I use new ICS kernel and radio on gingerbread rom?
for example stock kernel and radio 3.14.605.10?
In short, no.
The 3.x kernels are for ICS, and changing the radios is a terrible idea (I tried it. Ugh).
For GB, use Incredikernel. It will satisfy your kernel needs.
Sent from my ADR6425LVW using Tapatalk 2
LunaticSerenade said:
In short, no.
The 3.x kernels are for ICS, and changing the radios is a terrible idea (I tried it. Ugh).
For GB, use Incredikernel. It will satisfy your kernel needs.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
ok,ill check it out
Damasterjj said:
can I use new ICS kernel and radio on gingerbread rom?
for example stock kernel and radio 3.14.605.10?
Click to expand...
Click to collapse
You're supposed to be able to use GB Roms on ICS firmware if you flash the 'new'firmware patch. http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
If that was your question.
If you want to mix and match hboots and radios...that, I think is a bad idea.
topgun1953 said:
You're supposed to be able to use GB Roms on ICS firmware if you flash the 'new'firmware patch. http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
If that was your question.
If you want to mix and match hboots and radios...that, I think is a bad idea.
Click to expand...
Click to collapse
Confirmed. I tried and it failed. Big time.
Sent from my ADR6425LVW using Tapatalk 2
There's a patch for going back to gb I'll link you to it as soon as I get back to my computer. It's different from the old firmware patch
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
There's a patch for going back to gb I'll link you to it as soon as I get back to my computer. It's different from the old firmware patch
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
See post #4
Related
So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
tuscani1821 said:
So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Have you tried flashing the kernel only after the ROM?
Sent from my PG86100 using Tapatalk
tuscani1821 said:
So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Fix permissions from Rom Manager or the advanced option in CWM and reboot.
If that doesn't help, it's just a bad flash. Don't fret. Do an RUU and re-update the radio. There is no point in updating the firmware because when you flash a new ROM, you're replacing it. Then you can go ahead and S-OFF, root, flash a custom recovery, flash a ROM and kernel, etc.
Sent from a Shooter running Android 4.0.3 via XDA Premium.
megabiteg said:
Have you tried flashing the kernel only after the ROM?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Do you mean the stock kernel? I can't seem to locate the new one
Sent from my Transformer TF101 using Tapatalk
tuscani1821 said:
Do you mean the stock kernel? I can't seem to locate the new one
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
This is stock 2.17 boot.img
http://dl.dropbox.com/u/2437198/boot.img
hope it works for you
Just to make sure. I flash through fastboot or recovery?
Sent from my PG86100 using Tapatalk
tuscani1821 said:
Just to make sure. I flash through fastboot or recovery?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yes sir, fastboot flash boot boot.img would be the command to use once you set the phone to fastboot mode
Sent from my PG86100 using Tapatalk
Just got a replacement rezound. Do i need to update firmware or can i just flash an ICS ROM?
Sent from my ADR6425LVW using Tapatalk 2
Update firmware. They still come loaded with gb
Sent from my ADR6425LVW using Tapatalk 2
doesn't need to be updated, just remember to flash an old firmware patch before you boot.
GB ruu it. While they may not notice if it has ics or gb, you're better off being safe than sorry.
1heffer said:
GB ruu it. While they may not notice if it has ics or gb, you're better off being safe than sorry.
Click to expand...
Click to collapse
He's not taking it in for replacement, he already has a replacement .
Oldsteel68 said:
Just got a replacement rezound. Do i need to update firmware or can i just flash an ICS ROM?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
You don't 'need' to do anything. However, if it is just out of the box I would recommend this : http://themikmik.com/showthread.php?13780-STEPS-TO-ICS-FIRMWARE-UNLOCK-ROOT-and-S-OFF
The tutorial takes through update of the firmware to unlocking/root to s-off and then whatever you desire after. :good:
At the minimum, I would update the firmware by running the RUU, and then unlocking. Don't unlock first because you'll just have to relock to run the RUU!
As a previous poster commented, you don't have to update the firmware, but I bet you will eventually so get er done now.
There are other tutorials/"all in ones" out there so look and read around.
carngeX said:
He's not taking it in for replacement, he already has a replacement .
Click to expand...
Click to collapse
Haha, i see what i did there. :banghead:
Sent from my ADR6425LVW using Tapatalk 2
1heffer said:
Haha, i see what i did there. :banghead:
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
FWIW, just activated a warranty replacement yesterday. My specific steps were:
1. Unlock bootloader
2. Flash Amon Ra and do nandroid.
3. Flash 3.14.605.10 firmware & ICS leak from bootloader as PH98IMH.ZIP.
4. Run Juopunut's S-OFF
5. Reflash Amon Ra
6. Flash my ROM (see sig).
I also flash Titanium as a zip, and use App2zip. Not everything works when I do things that way, but it takes me most of the way home.
Sent into the innertubes from my Arnova 10 G2.
Finally had time to get this out. Tested on ViperRez but should work on any Sense 4 ROM. This is the kernel from the newest OTA leak made for Sense 4. Many are saying it's the same as previous ICS kernels. I know this is not true because I can see in the ramdisk a lot of debugging code is removed. My phone does run quite a bit cooler with this kernel and definitely AT least has an extra hour battery life. YMMV.
Thanks to con247 for the update script making this compatible with both S-ON and S-OFF phones.
I don't know if the newest firmware is required for this kernel. I am using it and I do recommend it. You must be S-OFF to flash.
NOTE: you will lose fastboot flash commands with this hboot until you unlock or the new jpbear hboot is released.
Kernel: https://dl.dropbox.com/u/15902163/RezoundGlobalOTA_Sense4kernel-videofix.zip
FIrmware: http://db.tt/CTBeTtwd
Video Fixed. Make sure you download the latest update (has videofix in filename)
Sent from my aokp_tenderloin using Tapatalk 2
Thank you! this new kernel is amazing. It last sooo much longer than the other ones, i was waiting for this
You don't need to be on the latest firmware to flash the kernel.
Thanks, trying now. Your a boss
I need all the battery life I can get now that I have 2 jobs
Sent from my ADR6425LVW using xda app-developers app
I don't understand. you said it's S on compatible but only for Soff?
Sent from my HTC Rezound.
Flash in recovery .
Sent from my ADR6425LVW using xda premium
alphabets said:
I don't understand. you said it's S on compatible but only for Soff?
Sent from my HTC Rezound.
Click to expand...
Click to collapse
It works on S-ON as well as S-OFF phones.
alphabets said:
I don't understand. you said it's S on compatible but only for Soff?
Sent from my HTC Rezound.
Click to expand...
Click to collapse
I think he meant the firmware is s-off only.
Thanks for this
vinylfreak89 said:
Finally had time to get this out. Tested on ViperRez but should work on any Sense 4 ROM. This is the kernel from the newest OTA leak made for Sense 4. Many are saying it's the same as previous ICS kernels. I know this is not true because I can see in the ramdisk a lot of debugging code is removed. My phone does run quite a bit cooler with this kernel and definitely AT least has an extra hour battery life. YMMV.
Thanks to con247 for the update script making this compatible with both S-ON and S-OFF phones.
I don't know if the newest firmware is required for this kernel. I am using it and I do recommend it. You must be S-OFF to flash.
NOTE: you will lose fastboot flash commands with this hboot until you unlock or the new jpbear hboot is released.
Kernel: http://db.tt/HlDRj4k8
FIrmware: http://db.tt/CTBeTtwd
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
If s-off is it necessary to change the kernel download to PH98IMG???
The kernel seems to be running sweet bro thanks for the work.
Sent from my ADR6425LVW using xda premium
If your not s-off you probably just have to flash the boot.img in hboot. Correct me if I am wrong, I just use the built in command in the resound all in one tool to flash custom boot.img
All in one tool
http://forum.xda-developers.com/showthread.php?t=1696394
Sent from my ADR6425LVW using xda app-developers app
SR3TLAW said:
If s-off is it necessary to change the kernel download to PH98IMG???
Click to expand...
Click to collapse
Just flash the zip in recovery it will place a PH98IMG.zip on your sd. Then just reboot to bootloader and it will install the kernel.
If you are s off you just flash the zip in recovery and your done
Sent from my ADR6425LVW using xda app-developers app
Op, any chance of a hex edit for overclock? I'd do it but my pc is down for good
Sent from my ADR6425LVW using xda app-developers app
Squirrel1620 said:
Op, any chance of a hex edit for overclock? I'd do it but my pc is down for good
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Is oc necessary? It's not that much better ...
Sent from my ADR6425LVW using Tapatalk 2
Could you possibly screenshot your Kernel version once you flash this...I feel like I did it right but my Kernel Version is showing 3.0.16-g480e1bo and Im pretty much positive that isn't this kernel...I am S-on
no you are running the latest kernel. so your good
It has been brought to my attention this breaks video recording. Looking into this now
Sent from my ADR6425LVW using Tapatalk 2
Squirrel1620 said:
Op, any chance of a hex edit for overclock? I'd do it but my pc is down for good
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
it is much more complicated than a simple hex edit to overclock. not possible until the src comes out.
vinylfreak89 said:
It has been brought to my attention this breaks video recording. Looking into this now
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
find the right libs problem solved looks like they changed a lot instead of a little...
Q: is there a stock ics rom without root and... Is it possible to remove superuser that comes on a installed rooted stock rom?
Sent from my ADR6425LVW using Tapatalk 2
A stock ICS from without root.... you mean the stock ICS that comes with the phone?
But, a ROM without root? Not possible. You have to be rooted to run and install ROMs.
What about a rom that is flashable through recovery without superuser?
Sent from my ADR6425LVW using Tapatalk 2
papaavi said:
What about a rom that is flashable through recovery without superuser?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Maybe, but why don't you want super user?
Where can I find a good unaltered base rom (non-ruu) . Having trouble finding a working link. Want an ics global version and a regular ics old kernel...
Sent from my ADR6425LVW using Tapatalk 2
papaavi said:
Where can I find a good unaltered base rom (non-ruu) . Having trouble finding a working link. Want an ics global version and a regular ics old kernel...
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I'm pretty sure the older stock ICS kernel won't work on the global leak.
Sent from my Rezound using Tapatalk 2
So, I recently S-OFF my rezound and rooted it etc. I seem to be getting constant rebooting everytime I turn the screen on to use the phone. So, when i wake the phone and unlock it and start to dial a number for example it reboots. ANy ideas on what's wrong? Thanks!
also i notice it only happens on sense roms. Only sense 4.0 tested though
Sounds like you are on old firmware. You may need the old firmware patch. What firmware are you on? Here it is if you need it. Flash in recovery after Rom
http://forum.xda-developers.com/showthread.php?t=1614180
Sent from my ADR6425LVW using Tapatalk 2
Evocm7 said:
Sounds like you are on old firmware. You may need the old firmware patch. What firmware are you on? Here it is if you need it. Flash in recovery after Rom
http://forum.xda-developers.com/showthread.php?t=1614180
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Thanks! I'll give it a shot
bluedegeon said:
Thanks! I'll give it a shot
Click to expand...
Click to collapse
Try a sense 3.6 ROM. If the problem sticks then try the ICS RUU
CosMiiK said:
Try a sense 3.6 ROM. If the problem sticks then try the ICS RUU
Click to expand...
Click to collapse
So just flash a 3.6 rom and it should fix it? I tried flashing the file above but still a no go. Only rom that works with out it rebooting is asop. Currently on miui. Gonna try that though.
Sent from my ADR6425LVW using xda premium
What is your firmware version? Can you post your radios?
Sent from my ADR6425LVW using Tapatalk 2
Evocm7 said:
What is your firmware version? Can you post your radios?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Sent from my ADR6425LVW using xda premium
bluedegeon said:
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
http://www.filefactory.com/file/3bw....0424r_3622A_MR3_9K_release_270509_signed.exe
you deffinitely have to upgrade your firmware with the ota ruu or the global leak ruu! here is the ota .12 one
here is the global one http://bit.ly/TRMmvF
Ya.... If I remember correctly those are gb radios. Someone correct me if I'm wrong. Either way those are some old azz radios.... I would update to the latest global leak so you can flash anything without issue.
Sent from my ADR6425LVW using Tapatalk 2
Evocm7 said:
Ya.... If I remember correctly those are gb radios. Someone correct me if I'm wrong. Either way those are some old azz radios.... I would update to the latest global leak so you can flash anything without issue.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Yeah flashing the whole RUU and re unlocking th boot loader and what not. Updated to the latest ICS ruu now. GOnna try flashing a rom now
Problem solved thanks guys appreciate it.
Sent from my ADR6425LVW using xda premium
Awesome. Enjoy
Sent from my ADR6425LVW using Tapatalk 2