Nokia lumia Dead when instaling bootloader it says format disk i press format and they cant start up in flash mode and default!! what do i can to start it up??
there's nothing you can do i'm afraid you have deleted the the bootloader, you need to get in Contact with Nokia Care it will take about a week and they should fix your phone or send u a replacement.
don't tell them you formated just say it crashed when updating and hasn't come bak on.
kingcartwright said:
there's nothing you can do i'm afraid you have deleted the the bootloader, you need to get in Contact with Nokia Care it will take about a week and they should fix your phone or send u a replacement.
don't tell them you formated just say it crashed when updating and hasn't come bak on.
Click to expand...
Click to collapse
Thanks, I cant fix at home??
No you can't fix it at home. Do as kingcartwright indicated.
vstankis said:
Nokia lumia Dead when instaling bootloader it says format disk i press format and they cant start up in flash mode and default!! what do i can to start it up??
Click to expand...
Click to collapse
this guyes can fix it
http://www.ebay.co.uk/itm/Boot-Repa...K_Replacement_Parts_Tools&hash=item416ea4e9be
Related
I have a Unit PW10B1 T-mobile stuck on the T-mobile boot screen, anyway I found out “GSM ERROR” in the boot loader, any suggestion or a way to fix it, I have a working o2 mobile, I’m not aware of the battery I could replace it from the other unit and recharge it…so pls give me feedback it’s very important to me, thank you.
If you can't access the device through active synce to try flashing the RSU, then you can do nothing except trying hard reset ... if it doesn't solve it it's better to send it to repair
Biso007 said:
If you can't access the device through active synce to try flashing the RSU, then you can do nothing except trying hard reset ... if it doesn't solve it it's better to send it to repair
Click to expand...
Click to collapse
Hello Biso, I can't access the device through the active sync, I tried Hard reset as well same problem the Unit stucks on the boot screen and the light flashes every like 5 seconds... about the repair center here in leb it's impossible there's no techis could solve this problem.. Isn't another way to do something to this unit ?
Unfort. NO, I couldn't find anyway to flash the RSU through SD ... the only option if you can pass the boot screen is to copy the RSU upgrade 4 files through SD card to the \windows\starup directory and soft rest
I'll try to get in I have nothing than just to let this unit works : :roll:
Anyone here consider to say something here for help ?
I'm still stuck thus I tried the Volume buttom to enter the today screen no luck as well ,but I noticed there's an Infrared connection btw my pc and the xda but active sync cannot connect to it, But I could send a files to the Xda like now am sending a .cab file I know it's not gonna make any diffrence but still maybe someone consider some help here.........
Someone would like to help here ?
Its not much good sending a file if you cant access and execute it on the xda, you have probably realised by now that "gsm error" is likely to be fatal to your xda. There is a person on this forum called Cgigate, he lives in Canada and can fix it, dont know the charges though so you need to ask him. I think he most likely writes direct to the chip through the address lines on the chip legs probably using a jtag interface and software.
cruisin-thru said:
Its not much good sending a file if you cant access and execute it on the xda, you have probably realised by now that "gsm error" is likely to be fatal to your xda. There is a person on this forum called Cgigate, he lives in Canada and can fix it, dont know the charges though so you need to ask him. I think he most likely writes direct to the chip through the address lines on the chip legs probably using a jtag interface and software.
Click to expand...
Click to collapse
Thank you cruisin-thru.. :roll:
If i understand it right you're able to transfer files from your PC to yiur XDA.
HAve you already tried to transfer the right RSU-File to the device and tried to start the update once again?
Stefan
LumpiStefan said:
If i understand it right you're able to transfer files from your PC to yiur XDA.
HAve you already tried to transfer the right RSU-File to the device and tried to start the update once again?
Stefan
Click to expand...
Click to collapse
Yes I could transfer any file I want to the Xda but still I can't do anything to it I can't reach it thus it's not an auto installer... Thus the screen is freezed on the T-mobile image, I tried the Volume buttom to enable the today screen still no luck as well :?
Ok.
So you think, with auto installer it could work. There has been a little how to about creatind an SD card with auto installer to start the RSU Upgrade. This would be the last posibility you can try to fix your device...
Stefan
LumpiStefan said:
Ok.
So you think, with auto installer it could work. There has been a little how to about creatind an SD card with auto installer to start the RSU Upgrade. This would be the last posibility you can try to fix your device...
Stefan
Click to expand...
Click to collapse
I had that auto installer file I copied it to an SD an prepared it to do that, anyway I hadn't tried it on that device later on I plugged it in my working XDA and the show begun by installing the RSU ON MY WORKING DEVICE :evil: I removed quickly the SD ,Installation stuck on 1% I went back to the start up folder and deleted the files :roll: lol I don't wanna tell you how much it feels it's like your seeing your baby dying infront of your eyes and you can't do anything about it,at the end It's still alive breathing, working properly :wink: beware guys of the RSU issue it's really horrible it might get ur device in the tombs..
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
can you get to the tri-colour bootloader of hard spl?
if so you will be able to reflash the rom via sd card?
saied7 said:
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
Click to expand...
Click to collapse
hello, try to put it into bootloader and then try to flash a different rom, might b a dump question, but you have installed hard spl?
lupe
yes i have installed the HARDSPL ,but i dont know how to go bootloader,
when i press enter,vol down and reset it comes to a 3-4 color screen but immediately jumps to a white screen and asks me to reset all data (vol up) or cancel (vol down)
btw, i've put a rom on my sd card but nothing happend !
oh man.. pff
maybe you have to rename this rom to RAPHIMG.nbh
Volume down and reset (without the enter) will get you into Bootloader screen. From there is should pick up the ROM on the SD card and ask you if you want to flash.
thnx for the tips bro's.
i did as you said (vol down and reset without enter)
and it asked me to load the image by pushing the enter button and i did.
now its about 15-20min that im waiting and still is on the 3color screen and nothing moves or comes or goes...
is it normal?
finally done. back to normal
oh im so happy , thnx for the help.
saied7 said:
finally done. back to normal
oh im so happy , thnx for the help.
Click to expand...
Click to collapse
glad to here its working again. could you please post exactly what you did as others might find themselves in this same spot, if they know what you did to fix it, it will save them time and also keep them from having to start a new thread.
thanks
Lupe
ya my problem was as i mentiond before i installed a CDMA version(USA VERSION locked on a carrier i think) , because the roms that were cooked are amazing,beautiful and dynamic ... but i didnt know that its not compatible with a normal TP and my phone after installation hanged just on the BIOS screen...nothing goes,nothing comes...i thought i've bricked my phone !
but after your advises i put one of the GSM roms on the SD card and changed the name of ruu_signed.nbh to RAPHIMG.nbh and VOL DOWN + SOFT RESEST to go to the bootloader menu,followed the instructions and finally fixed the problem and installed the right version.
but one thing that i DONT understand is why these beautiful roms are ONLY for CDMA version and not compatible with normal TP's???
thnx for the sharing of your experience with others
I was going to AT&t to try to get a replacement because the keyboard was very loose so I was flashing everything back after flashing the rom back I was flashing the stock hard spl but instead of replacing the nbh file I just put the file on my storage card and flashed it (VERY STUPID)
When I turn my phone on I get the tricolor screen and a message that says: Upgrade ROM code error Please try agian =
and nothing happens I tried hard reseting it but nothing happens, I can't get past that screen, I also tried flashing a new rom through the storage card method since I can't connect with Active Sync
Please help me , I just got my phone in November and I don't want to loose it, I would like to see what help I can get before going thought ATT customer service and telling them I didn't do anything and that it just happened by itself
Thanks to any people who respond
i think to flash a rom from pc u don't need to be connected to active sync try conecting while in tri clour screen and flash the rom
or could u say what exactly happened where u trying to flash a rom or what?
i tried now with my touch pro i entered boot mood then tried connected to pc to flash a rom and it worked it started.......
Thegreat1 said:
i think to flash a rom from pc u don't need to be connected to active sync try conecting while in tri clour screen and flash the rom
or could u say what exactly happened where u trying to flash a rom or what?
Click to expand...
Click to collapse
I was trying to restore the stock hard spl, don't
Thegreat1 said:
i tried now with my touch pro i entered boot mood then tried connected to pc to flash a rom and it worked it started.......
Click to expand...
Click to collapse
did u connect to Active Sync or through the storage card
no active sync
just entered boot mode then put the usb cable then started the flashing process
Thegreat1 said:
no active sync
just entered boot mode then put the usb cable then started the flashing process
Click to expand...
Click to collapse
I get an error during the flashing process, i was flashing the hard spl
read the first paragraph on the first post, I added exactly what I did wrong
u were trying to flash hard-spl when it hanged in the tri-clour screeen?
did u revert back to stock rom before trying to revert to stock spl?
Thegreat1 said:
did u revert back to stock rom before trying to revert to stock spl?
Click to expand...
Click to collapse
ya, read the my first post again, I added some stuff
Thegreat1 said:
u were trying to flash hard-spl when it hanged in the tri-clour screeen?
Click to expand...
Click to collapse
yes, after I messed it up the first time
if you can get to the boot loader screen you can probably flash any rom. simply rename the rom file to RAPHIMG.nbh and place it on your memory card, hold volume down + reset with stylus. you should be set. good luck.
does the bootloader still show the olinex 1.90
warren2781 said:
if you can get to the boot loader screen you can probably flash any rom. simply rename the rom file to RAPHIMG.nbh and place it on your memory card, hold volume down + reset with stylus. you should be set. good luck.
Click to expand...
Click to collapse
tried it, it doesn't work
Thegreat1 said:
does the bootloader still show the olinex 1.90
Click to expand...
Click to collapse
No, I am trying to flash it back to the olinex 1.90 but I keep getting an error in ruu
Have you tried this http://forum.xda-developers.com/member.php?u=467141
try flashing hard-spl once again. if it works your saved. as far as i know the people over at att only check for water mark at least in my place the y do. good luck
I found that it was not possible to flash the HardSPL from tri-colour screen.
It only worked for me when windows mobile was fully booted. When you start the HardSPL RUU the phone's screen will just go black, and will return when the update is completed.
I would try connecting the phone while in tri-colour mode, then running the original rom RUU on the PC and seeing if it works. If it gets to the stage where the loading bar shows up on the phone you should be ok.
Once the rom is loaded, start your windows mobile, connect to the PC, and run the RUU for HardSPL.
Best of luck to you!
Thanks for your guys responses I have successfully recovered my phone, I just flashed the original ATT rom from ruu
Very glad that you found solution to fix that problem, because it could happend to any one. Especially after I was thinking to flash everything back to att stock because of my usb exit is getting loose.
mr.denis said:
Very glad that you found solution to fix that problem, because it could happend to any one. Especially after I was thinking to flash everything back to att stock because of my usb exit is getting loose.
Click to expand...
Click to collapse
Thanks, ya, you just have to be careful and read directions if present and read them carefully
I have a hd2 with blutopia n supersports rom and today has been 1 helluva messed up day seriously !( I cant think straight) its all because my phone wont work. the phone was working beautifully with android on it and out of nowhere today the screen is not responding AT ALL. its so frustrating cant make a call cant read my txts.can some 1 please just tell me what i have to do so i can get a replacement? I put hspl3 and bluetopia android and supersports rom....please tell me what rom do i need to flash to it,do i have to relock/remove hspl3? thanks if u can help me out i just cant think clearly right now
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
carl1961 said:
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
Click to expand...
Click to collapse
what about hspl3???? what do i have to do so i can send it back without tmobile asking me why is there a custom rom and hspl3 on ur phone
ihateu said:
what about hspl3????
Click to expand...
Click to collapse
will be replaced when you flash original rom
djcedric said:
will be replaced when you flash original rom
Click to expand...
Click to collapse
ok how can i get the original rom... i cant get it from tmobile website because it wants a mei # and i cant get to it on my phone cause the screen is not working
open your phone up. take the battery off. The IMEI should be there along with serial number. Good luck
Touchscreen problem
Yesterday I start with a similar problem.
Using several Android builds on the same stock memory card.
The touchscreen stops responding always when I try to
reboot or turn off the phone, the same on all Android builds
and on WinMO. But locking the phone brings the touchscreen
back to life. Then I am able to unlock the phone and the
touchscreen keeps working OK.
Will try flashing the updated stock ROM.
you run hspl3 again , but select the other option with the extra.oooo, 208.000 , by default hspl3 installs the one to allow roms to work,,, when you rerun hspl3 select the other to set back to original so you can send back to factory anfter u install the t-mobile original rom
best to read this
http://forum.xda-developers.com/showthread.php?t=653614
I've flash the interop-unlock rom with dd. Maybe something wrong with my step.(before i've unlocked the bootloader)
And now the phone dead. No matter how i do with the phone, it can't connect to my PC. So i can't use the care suit to recovery the phone. That means the phone is just a brick now.
Hope someone can help me.THX
Did you try removing the battery and inserting it again? it works for me.
bugman12 said:
Did you try removing the battery and inserting it again? it works for me.
Click to expand...
Click to collapse
yepp. i've did it lots of time. How long have u been removing the battery?
I assume that you have flashed to the correct partition. Did you create a backup of that partition before? Have you tried to reflash another ROM or a stock ROM?
just a moment to make clear. the phone turns on but it does not connect, or it does not turn on at all?
ChrisKringel said:
I assume that you have flashed to the correct partition. Did you create a backup of that partition before? Have you tried to reflash another ROM or a stock ROM?
Click to expand...
Click to collapse
i think u r right. i flash to the incorrect partition and now it doesn't work any more.
mariosraptor said:
just a moment to make clear. the phone turns on but it does not connect, or it does not turn on at all?
Click to expand...
Click to collapse
it doesn't turn on at all...
yuyamin901002 said:
it doesn't turn on at all...
Click to expand...
Click to collapse
does it interact at all the PC? in any way. maybe just a bit to invert the bootloader unlock via HxD
"no space left on device" when flashing lumia 710
I got same problem,
while installing i got this message from terminal "no space left on device"
my phone is not turning(removed and re-inserted battery too)
please help
Can you give us a list of all partitions on your devices? Preferably generated on the same OS you used to flash the BL.
Edit: Nevermind, you stated it wont turn on so this is impossible. I would recommend leaving it on the charger for around 10 hours to check if the battery is empty. If this won't help you should either go to a local Care Point or send it in for repair. Of course you should not mention that you tried to flash the bootloader.