Related
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway
As of late, my 3d turns on but nothing shows up on the screen. The capacitive lights turn on and it does the quick vibrate when you power it on. Other than that, it shows no life. It randomnly started doing this, does anyone have any ideas on how I can fix this? Any help is appreciated. Thanks.
b1gsby_02 said:
As of late, my 3d turns on but nothing shows up on the screen. The capacitive lights turn on and it does the quick vibrate when you power it on. Other than that, it shows no life. It randomnly started doing this, does anyone have any ideas on how I can fix this? Any help is appreciated. Thanks.
Click to expand...
Click to collapse
Did this start happening after you tried flashing a specific rom?
valdesr11 said:
Did this start happening after you tried flashing a specific rom?
Click to expand...
Click to collapse
No, just did it after my battery died one day.
b1gsby_02 said:
No, just did it after my battery died one day.
Click to expand...
Click to collapse
Pull out your battery, put it back in, and try charging your phone for about 30 min without turning the phone on. Then try again. Report back.
Thanks.
valdesr11 said:
Pull out your battery, put it back in, and try charging your phone for about 30 min without turning the phone on. Then try again. Report back.
Thanks.
Click to expand...
Click to collapse
Will do thanks.
Additional info: When the phone is "on" my computer recognizes it, and I can tell it to boot into bootloader using adb. The phone is 100% stock, hboot 1.5 s-on. Also, after the phone is on, and I hit the power button, the capacitive lights turn on, and they shut off once I hit the power button again, as if the screen was being turned on, but it just doesn't display anything.
Also, is there anything I can do to possibly get the display back on. Something like put a stock ruu on my sd card, name it PG86IMG.zip, reboot into bootloader, apply the ruu and perhaps that would bring my display back on? Or is it more likely hardware related which I will have to take the phone apart?
Having the phone on the charger while off didn't change anything. Now I am flashing the latest stock ruu, while it's updating the phone's display SHOULD be on showing the status of the update, but it's not displaying anything. The update completed, the phone rebooted on its own, but again, the display never turned on. Not sure what to try now..?
b1gsby_02 said:
Having the phone on the charger while off didn't change anything. Now I am flashing the latest stock ruu, while it's updating the phone's display SHOULD be on showing the status of the update, but it's not displaying anything. The update completed, the phone rebooted on its own, but again, the display never turned on. Not sure what to try now..?
Click to expand...
Click to collapse
This happened to me when I flashed a incompatible kernel......now all you need to do is flash a Rom and also flash the boot.img from that ROMs zip using fastboot and you will be good to go.
mnomaanw said:
This happened to me when I flashed a incompatible kernel......now all you need to do is flash a Rom and also flash the boot.img from that ROMs zip using fastboot and you will be good to go.
Click to expand...
Click to collapse
Not sure how to do that when I can't even see anything on the phone.
b1gsby_02 said:
Not sure how to do that when I can't even see anything on the phone.
Click to expand...
Click to collapse
is your phone's bootloader unlocked with htcdev.com?
If you haven't unlocked your phone yet then I can't say for sure if flashing Rom and kernel will work or.not......
If you haven't unlocked , just use a RUU.exe and your phone should be working again unless its a hardware issue
mnomaanw said:
is your phone's bootloader unlocked with htcdev.com?
If you haven't unlocked your phone yet then I can't say for sure if flashing Rom and kernel will work or.not......
If you haven't unlocked , just use a RUU.exe and your phone should be working again unless its a hardware issue
Click to expand...
Click to collapse
Everything is locked, and I tried running the latest stock ruu and it completed everything, and my phone rebooted on its own after it was completed, and still the display won't come on.
b1gsby_02 said:
Everything is locked, and I tried running the latest stock ruu and it completed everything, and my phone rebooted on its own after it was completed, and still the display won't come on.
Click to expand...
Click to collapse
Might be a hardware issue I guess .....
mnomaanw said:
Might be a hardware issue I guess .....
Click to expand...
Click to collapse
Thank you for the quick replies.
If it is hardware related, what exactly would I need to fix/replace?
my evo ed screen show up anything help..
valdesr11 said:
Did this start happening after you tried flashing a specific rom?
Click to expand...
Click to collapse
i treid to flash a rom and my screen when black,i use(rom manager)..heeelllpp plzzz
Hi,
I've just got bricked u20i. I don't know what previous owner have done with this phone, but it has bootloop. I've tried to flash stock 2.1 with flashtool and seus with the same result. Phone normally enters flashmode and can be flashed. Is there any way to resurrect that phone?
Well..all you have to do is http://forum.xda-developers.com/showthread.php?t=1682966
You can solve the problem by searching.
Sent by Vince™
It doesn't seems to be helpful to me. I just can't boot it - it looks to be frozen after second boot animation. I don't want to mod it (at the moment) but if I would, I should have rooted phone, but I can't do it, because it can't boot.
Dreadlish said:
It doesn't seems to be helpful to me. I just can't boot it - it looks to be frozen after second boot animation. I don't want to mod it (at the moment) but if I would, I should have rooted phone, but I can't do it, because it can't boot.
Click to expand...
Click to collapse
Maybe there's a problem with the sd-card, if it's missing, put one in, if there's one in the phone format it if you can.
SmG67 said:
Maybe there's a problem with the sd-card, if it's missing, put one in, if there's one in the phone format it if you can.
Click to expand...
Click to collapse
Just tried it with some different cards - without result.
Dreadlish said:
Just tried it with some different cards - without result.
Click to expand...
Click to collapse
If fresh firmware from SEUS Does not yield results there's a piece of hardware that's broken I suppose, don't think there's much you can do about that.
I'm interested in running a custom Rom on my mpcs LG f6 (ms500). I'm a part timer at this, my understanding of code is devastatingly deficient.
I have a an l9 and another f6 that won't even turn on and I'm wondering where, even, to begin.
All are mpcs.
All three, including the one I'm writing this on presently, were/are rooted.
An update took out the non-working f6, and the l9 was my bad.
I'm now on a rooted f6 running battery booster pro, overclocked with freedom kernal, with roehsoft ram expander doubling my ram to 1608.
I realize my circumstances are all over the place, but, if anyone has the genuine benevolence to help me where they can; my gratitude will be unquantifiable.
findrome said:
I'm interested in running a custom Rom on my mpcs LG f6 (ms500). I'm a part timer at this, my understanding of code is devastatingly deficient.
I have a an l9 and another f6 that won't even turn on and I'm wondering where, even, to begin.
All are mpcs.
All three, including the one I'm writing this on presently, were/are rooted.
An update took out the non-working f6, and the l9 was my bad.
I'm now on a rooted f6 running battery booster pro, overclocked with freedom kernal, with roehsoft ram expander doubling my ram to 1608.
I realize my circumstances are all over the place, but, if anyone has the genuine benevolence to help me where they can; my gratitude will be unquantifiable.
Click to expand...
Click to collapse
I'll give a shot at trying to help you with the L9 but I'm going to need some details about what happened. :/
Thank you AshIndigo
L9 rooted and running system tuner pro. I turned on the oem battery function, kernal, doo-hicky (highly technical terminology). The unit ceased recognizing the battery after reboot. It stated, at boot, to insert oem battery and will not take a charge.
I'm considering a wipe and a new bootlaoder with a custom Rom if possible, but I'll settle with just getting it working.
findrome said:
Thank you AshIndigo
L9 rooted and running system tuner pro. I turned on the oem battery function, kernal, doo-hicky (highly technical terminology). The unit ceased recognizing the battery after reboot. It stated, at boot, to insert oem battery and will not take a charge.
I'm considering a wipe and a new bootlaoder with a custom Rom if possible, but I'll settle with just getting it working.
Click to expand...
Click to collapse
Thats a new one. But what modes can you get into. S/W, fastboot, recovery, the wipe combination? If you can get into s/w mode just use the lg mobile tool and that should fix it. Otherwise we may need to reflash the phone. and is your bootloader unlocked?
It doesn't power up in the slightest. And it won't charge.
Bootloader was not unlocked, I'm still trying to wrap my skull jelly around that. I'm thinking flash might be the best option, but I'd prefer to preserve the data (not likely if flashed). I've downloaded LG flash tool, but the manual data entry is a mystery, excluding imei and serial.
findrome said:
Bootloader was not unlocked, I'm still trying to wrap my skull jelly around that. I'm thinking flash might be the best option, but I'd prefer to preserve the data (not likely if flashed). I've downloaded LG flash tool, but the manual data entry is a mystery, excluding imei and serial.
Click to expand...
Click to collapse
Alright I'm presuming s/w mode doesnt work but if it does then that would be nice. Next thing is to try fastboot. Here is a link to a fastboot for the l9
http://forum.xda-developers.com/showthread.php?t=2292828
If you manage to get into fastboot. We can reflash things. Truth to be told I dont know if we reflash we might have to wipe the device. :/
I've resolved myself to things being what they are.
What's s/w mode?
AshIndigo said:
Alright I'm presuming s/w mode doesnt work but if it does then that would be nice. Next thing is to try fastboot. Here is a link to a fastboot for the l9
http://forum.xda-developers.com/showthread.php?t=2292828
If you manage to get into fastboot. We can reflash things. Truth to be told I dont know if we reflash we might have to wipe the device. :/
Click to expand...
Click to collapse
Downloaded, followed instructions. Device booted once and quit while playing around with it, consistent with initial failure as I recall (if only vaguely), now on s/w update screen. Says please wait while upgrading.
Update:
Can enter s/w update. Now takes charge, will likely be 100% by the time you read this.
Lastly, can power on but powers off after entering screen unlock code.
Thank you again AshIndigo.
After some more dabbling, I've made it past the lock screen. The result is a message " please use genuine LG battery" before the unit shuts down and goes into what might might questionably be a bootloop. It's the system tuner pro app, set to start on start-up, that's the thorn in my side.
What are your orders captain?
findrome said:
After some more dabbling, I've made it past the lock screen. The result is a message " please use genuine LG battery" before the unit shuts down and goes into what might might questionably be a bootloop. It's the system tuner pro app, set to start on start-up, that's the thorn in my side.
What are your orders captain?
Click to expand...
Click to collapse
Sorry for replying late but if you have adb enabled we can uninstall the app easily. This should be the command to remove it.
adb uninstall ccc71.pmw.pro
AshIndigo said:
Sorry for replying late but if you have adb enabled we can uninstall the app easily. This should be the command to remove it.
adb uninstall ccc71.pmw.pro
Click to expand...
Click to collapse
No apologies needed, your time is greatly appreciated.
I ran the command, with what appears to be success. It seems though, the kernal remains intact.
A wipe seems imminent.
findrome said:
No apologies needed, your time is greatly appreciated.
I ran the command, with what appears to be success. It seems though, the kernal remains intact.
A wipe seems imminent.
Click to expand...
Click to collapse
(I just deleted everything I wrote and have to write it again )
Ok so before we try to re-flash the kernel. Lets just try the lg mobile support tool. If that doesn't work then heres instructions
1. If you have the p760 then heres the stock kernel
http://www.mediafire.com/download/87i322233ev36k8/stock-kernel.zip
3. Download it
4. extract the boot.img from the zips and put it into the "yours" folder in the fastboot folder
5. Get into fastboot
6. Make sure the device is connected by typing "fastboot devices"
(It should look like this) http://cdn.teamandroid.com/wp-content/uploads/2012/07/fastboot-devices-600x302.jpg
6a. Pray to Google
7. type "fastboot flash boot boot.img"
8. Pray again.
If you don't have the p760 then tell me which device you have so I can get the kernel
@ AshIndigo
P769BK
AshIndigo said:
(I just deleted everything I wrote and have to write it again )
6a. Pray to Google
8. Pray again.
If you don't have the p760 then tell me which device you have so I can get the kernel
Click to expand...
Click to collapse
Golden, you missed your calling.
It's a P769(bk). Not that the color makes a difference. It's also a T-mo, not mpcs. If that matters.
findrome said:
Golden, you missed your calling.
It's a P769(bk). Not that the color makes a difference. It's also a T-mo, not mpcs. If that matters.
Click to expand...
Click to collapse
I dont think I've missed it yet
Alright so there are 2 options right now.
1. You resign the kernel or wait for me to get on a windows computer so I can resign it.
2. You unlock your bootloader.
If you choose option 1 then and you want to try then here's the link.
http://forum.xda-developers.com/optimus-l9/general/guide-install-custom-roms-locked-t3249828
And here's the link to the kernel
http://d-h.st/pdM
1. Follow the manual instructions in the post except just do it for the boot.img and flash that instead.
"fastboot flash boot boot_bumped.img"
If you choose option 2 then here's a link with instructions. (My phone is perma-locked so I never got to try this)
http://forum.xda-developers.com/showthread.php?t=2601480 (Wish you luck if you try this)
If anything is unclear let me know.
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
arnavde said:
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
Click to expand...
Click to collapse
If you have an SD Card installed, try removing the SD card and then booting the phone.
If that works... then I bet you have a Samsung 128GB MicroSD card???? (if not, maybe another brand 128GB card?)
It seems that there is something in the 7.1.1 boot sequence for the Moto Z's that is hanging during the mount of the SD Card when it is a Samsung 128GB card. Removal of the SD allows a successful boot up.
Once boot up is complete, you should be able to insert the SD card (without rebooting the phone) and the phone will see the SD card and the "missing SD" notification will go away and the phone will function as it always has. It seems that unless Motorola/Lenovo release a patch for this issue, that your only options are 1) remove SD during every reboot, or 2) purchase a different SD card (Motorola seems to recommend SanDisk).
No there is no SD card. The phone is stuck on bootloader.
I had the same issue, stuck on bootloader and error saying recovery could not be read. I rebooted a few times and it eventually went away. Problem is that now my phone acts REALLY weird. And the Software Assistant does NOTHING to help out. It doesn't detect the phone in regular mode and in fastboot, it says everything is fine and doesn't let me restore.
I have a feeling the OTA had a problem installing and a clean slate is the only way to fix it. The only issue is that I can't find a copy of an XT1560-02 ROM anywhere, only other variants.
I had the same issue after update. Recovery could not be validated. I removed the SD card and boom perfect boot. I just hope the issue gets patched soon, would hate to have to carry that Lil key around for if I need a reboot to remove SD card before boot
Same issue. But instead of removing sd card. Just go into recovery mode and wipe cache.
Works
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
I did id, but not luck
maumarti2k said:
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
Click to expand...
Click to collapse
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
acalapone said:
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
Click to expand...
Click to collapse
Maybe you could provide more information. Have you been on Stock 7.1.1 and tried to unlock your bootloader without allowing Oem Unlocking in developer options? What is the current state of your device, means are you able to get into recovery mode?
7.1.1 Original Stock - Not Allowed OEM Unlocking
Everything was great, but a week ago the cellphone it restarted itself, and never back: It's stuck in bootloop.
I get it with Android 6.0, and i was upgrading via Ota until 1th July, which that means it's 7.1.1 Rom Stock
Cause i wanted have my cellphone pure, i didnt touch anything(I didn't want loose my warranty), so i'm never check to allow "oem unlocking"
Now, warranty doesn't help me because i bought it in Italia, and im living in Argentina now, and they said taht they have Local Warranty.
So, i tried to solved it by my self... I did it with my old phones but they were cheap, so i think is it that why i never have ear about Reset Software Factory Protection.
Brief:
Original Stock 7.1.1
Yes, i tried unlock BL without Allow OEM Unlocking
Yes, i can get in BootLoader and in fastboot without problem
Thank You very much
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume up) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
I did it.
bullfinch110 said:
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume down) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
Click to expand...
Click to collapse
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
acalapone said:
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
Click to expand...
Click to collapse
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
bullfinch110 said:
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
Click to expand...
Click to collapse
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
acalapone said:
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
Click to expand...
Click to collapse
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
@acalapone i have edited my post above
bullfinch110 said:
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
Click to expand...
Click to collapse
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
acalapone said:
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
Click to expand...
Click to collapse
You cannot go back to 6.x after updating the bootloader to 7.x
lollyjay said:
You cannot go back to 6.x after updating the bootloader to 7.x
Click to expand...
Click to collapse
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
acalapone said:
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
Click to expand...
Click to collapse
There is still no RETEU 7.0 available, thats why you have to flash the RETBR.
Try again to flash the RETBR NPL25..firmware with RSD. If you'll get the same failed error message, here is
PLAN B:
Copy the flashall.xml file and rename it to flashallcopy.xml.
Open the copied file with a text editor and delete the 2 lines with "gpt" and "bootloader" in it. Save it and close the copy. With this the RSD program will skip those two commands. Click the 3 dots and add the flashallcopy.xml file to RSD. Click Start.
If that doesn't work, we have to run Plan C
Good luck