i got this mobile i9100 g from 3 weeks
with stock kernel jplc1 2.6.35.7
i'm from egypt
i want to make a reverse tethering so making deep search in google to find i should make a root
trying root unlocker didn't work
trying superatom kernel it work
and i got reverse tethering
when i connect to kies today found new firmware arrived ics
upgrade my phone with kies
found that
android version 4.0.3
baseband ver i9100gxxlpr
kernel ver. 3.0.8 [email protected] #2 smp preempt tue may 29 22:14:18 kst 2012
build number iml 74k.jplp6
i found two main problems after flashing
kies unable to connect mobile although i remove and re install last version of kies
the querty keyboard of samsung didn\t show any arabic letters although on space button written arabic in selection
the swype key board works normally arabic and english
i download the firmware from sammobile and download it with odin lower vol button+home+pwer
I9100GJPLP6_I9100GOJPLP5_I9100GXXLPR_HOME.tar.md5
still the same problem i notice that my mobile didn't wipe any data like contacts and sms
what is the solution ?
can i downgrade the ics to gb again?
if yes how i can do that and where i can find stock kernel of egypt
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
mostafabasal said:
i got this mobile i9100 g from 3 weeks
with stock kernel jplc1 2.6.35.7
i'm from egypt
i want to make a reverse tethering so making deep search in google to find i should make a root
trying root unlocker didn't work
trying superatom kernel it work
and i got reverse tethering
when i connect to kies today found new firmware arrived ics
upgrade my phone with kies
found that
android version 4.0.3
baseband ver i9100gxxlpr
kernel ver. 3.0.8 [email protected] #2 smp preempt tue may 29 22:14:18 kst 2012
build number iml 74k.jplp6
i found two main problems after flashing
kies unable to connect mobile although i remove and re install last version of kies
the querty keyboard of samsung didn\t show any arabic letters although on space button written arabic in selection
the swype key board works normally arabic and english
i download the firmware from sammobile and download it with odin lower vol button+home+pwer
I9100GJPLP6_I9100GOJPLP5_I9100GXXLPR_HOME.tar.md5
still the same problem i notice that my mobile didn't wipe any data like contacts and sms
what is the solution ?
can i downgrade the ics to gb again?
if yes how i can do that and where i can find stock kernel of egypt
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
People please learn to use forum sites... there is a clear ques./ans. Seperate section for this.... you start a new ****ing thread in the DEVELOPMENT SECTION...
And yeah GOOGLE, did u even google it?:sly:
Download a gb firmware by google and flash it from odin .....
Sent from my GT-I9100G using Tapatalk 2
incarnation95 said:
People please learn to use forum sites... there is a clear ques./ans. Seperate section for this.... you start a new ****ing thread in the DEVELOPMENT SECTION...
And yeah GOOGLE, did u even google it?:sly:
Download a gb firmware by google and flash it from odin .....
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
thanks for respect
mostafabasal said:
thanks for respect
Click to expand...
Click to collapse
Dont worry... people are ready to help if others are ready to follow some rules
Now as we are in the right section. If u are in any prob. Tell or pm me
Sent from my GT-I9100G using Tapatalk 2
Yes finelly I did
noushadkpr said:
Yes finelly I did
Click to expand...
Click to collapse
Sent from my U9202L-1 using Tapatalk 2
Related
I have a Galaxy SII and I want to update it to ICS. I Live in New Zealand on the vodafone network.
I have tried using Kies except it doesn't support updating and I don't know why!
Please help!
doed ur coutry has ics upgrade via kies....
check *#1234# and post...
Well, you can always go down the other road and skip Kies, flashing an ICS rom from the forums, of which are a lot good available, I'm very happy with one as well.
That is, if you're happy to leave the Samsung stock rom path.
You'll find all the info in the development section for the SGSII.
In reply
After putting in the code...
PDA : I9100ZSKI3
PHONE : I9100XXKI3
csc : I9100OZSKI3
Build Info : Fri Sep 23 19:48:32 KST 2011
If that's what you wanted? rocky23
thinkharry said:
After putting in the code...
PDA : I9100ZSKI3
PHONE : I9100XXKI3
csc : I9100OZSKI3
Build Info : Fri Sep 23 19:48:32 KST 2011
If that's what you wanted? rocky23
Click to expand...
Click to collapse
i think rocky was saying do you have ics ready for your region yet??
but i answer it for you yes it does and
Here is your answer first one on top of list !
Thanks! So shouldn't I be able to update via kies then?
thinkharry said:
Thanks! So shouldn't I be able to update via kies then?
Click to expand...
Click to collapse
kies is sh*t only use it to install usb drivers then remove from desktop use odin 1.85 to flash or mobile odin app on play store
you can update to ics simply via odin. its the easiest method. just goto intratech's thread of official ics roms and choose the one you want + the same thread also has a good tutorial on how to use odin.
Hi there! I hope someone can enlighten me. I've never been able to update my SII since I got it, now it's almost a year ago in Belgium (so I'm stuck with GB 2.3.3). KIES says I've got the latest firmware version, and I get the same thing via FOTA.
Now it seems as if ICS provides some battery saving, among some other features, so I'd like to update the firmware (at least for once!)
I would like to avoid rooting, flashing and so on... although it seems as that's the most practical way to follow
So, thanks a lot in advance to anyone who could help me
yo
I'm a mac user, btw.
Here's the device ifo, in case it helps:
PDA I9100XWKF3
PHONE I9100XXKE7
CSC I9100LUXKD3
Build Info: Thu Jun 9 18:16:44 KST 2011
Android version 2.3.3
Kernel [email protected] #2
GINGERBREAD.XWKF3
yogismo said:
Hi there! I hope someone can enlighten me. I've never been able to update my SII since I got it, now it's almost a year ago in Belgium (so I'm stuck with GB 2.3.3). KIES says I've got the latest firmware version, and I get the same thing via FOTA.
Now it seems as if ICS provides some battery saving, among some other features, so I'd like to update the firmware (at least for once!)
I would like to avoid rooting, flashing and so on... although it seems as that's the most practical way to follow
So, thanks a lot in advance to anyone who could help me
yo
I'm a mac user, btw.
Here's the device ifo, in case it helps:
PDA I9100XWKF3
PHONE I9100XXKE7
CSC I9100LUXKD3
Build Info: Thu Jun 9 18:16:44 KST 2011
Android version 2.3.3
Kernel [email protected] #2
GINGERBREAD.XWKF3
Click to expand...
Click to collapse
check the link below it has all info regarding ICS ver region vise and also install instruction
http://forum.xda-developers.com/showthread.php?t=1075278
your CSC is LUX, whic already recieved the ICS updated, donno wot happened in your case...
LUX = LUXEMBURG
ref: http://androidforums.com/samsung-galaxy-s2-international/523455-ics-csc-you-eligible-update.html
Sun90 said:
check the link below it has all info regarding ICS ver region vise and also install instruction
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Thanks pal, this is the kind of stuff I've been seeing around and would like to avoid!
ZACQ8 said:
your CSC is LUX, whic already recieved the ICS updated, donno wot happened in your case...
LUX = LUXEMBURG
That's my point exactly. The update is available already in the area but for some reason my device has not been able to update the firmware since I bought it (not even for later versions of GingerBread) :S
Click to expand...
Click to collapse
yogismo said:
Hi there! I hope someone can enlighten me. I've never been able to update my SII since I got it, now it's almost a year ago in Belgium (so I'm stuck with GB 2.3.3). KIES says I've got the latest firmware version, and I get the same thing via FOTA.
Now it seems as if ICS provides some battery saving, among some other features, so I'd like to update the firmware (at least for once!)
I would like to avoid rooting, flashing and so on... although it seems as that's the most practical way to follow
So, thanks a lot in advance to anyone who could help me
yo
I'm a mac user, btw.
Here's the device ifo, in case it helps:
PDA I9100XWKF3
PHONE I9100XXKE7
CSC I9100LUXKD3
Build Info: Thu Jun 9 18:16:44 KST 2011
Android version 2.3.3
Kernel [email protected] #2
GINGERBREAD.XWKF3
Click to expand...
Click to collapse
Go to www.sammobile.com download a stock firmware update and flash through odin. There's lots of guides on the site about flashing steps.
Sent from my GT-I9100 using xda premium
Argh
kilometers4 said:
Go to sammobile download a stock firmware update and flash through odin. There's lots of guides on the site about flashing steps.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
OK, I've tried that and odin is not recognizing my phone... The firmware is there, I'm in download mode. I've switched usb ports... This is a bloody nightmare!
Last week I told a friend of ñine to try to update hers and she did it straight away through FOTA... and she had bought it only 6 months after me! What a bunch of wankers these Koreans!
friend of mine had the same problem with his s2, i found out his problem was caused by his phone being locked to a provider and because of this he had different kernel from me. he got update several months after me...
this because of provider's own extra apps on the phone...!
Just flash via Odin
http://forum.xda-developers.com/showthread.php?t=1075278
http://forum.xda-developers.com/showthread.php?t=1544487
yogismo said:
OK, I've tried that and odin is not recognizing my phone... The firmware is there, I'm in download mode. I've switched usb ports... This is a bloody nightmare!
Last week I told a friend of ñine to try to update hers and she did it straight away through FOTA... and she had bought it only 6 months after me! What a bunch of wankers these Koreans!
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is closed before you open Odin
Sent from my GT-I9100 using xda premium
i'd appreciate any help here
i stupidly used a root program outside the xda forum and soft bricked the phone.
afta recovering the phone its told me i need to update it, it will not update over the air and kies says its not supported for updating, can anyone help me get back to complete stock so i can start fresh???
my original details were
model- GT-I9100
android version- 4.0.3
baseband- I9100XXLPS
kernal- 3.0.15-I9100XWLP7-CL340913 [email protected] #3
build- IML74K.XWLP7
now my details are
model- GT-I9100
android version- 4.0.3
baseband- I9100XXLPH
kernal- 3.0.15-I9100XXLPH-CL118559 [email protected] #3
build- IML74K.XXLPH
obviously only the baseband, kernal and build have changed but anyone that can help me get back to complete original so i know it will update as and when needed, it will be much appreciated
Hi there,
- Have you tried to get to the Download mode ?
- Have you a JIG ?
- If so, just use ODIN to flash a proper stock ROM.
Yes, pick the laest official ROM from here for ODIN flash : http://forum.xda-developers.com/showthread.php?t=1544487
ram3n said:
Hi there,
- Have you tried to get to the Download mode ?
- Have you a JIG ?
- If so, just use ODIN to flash a proper stock ROM.
Click to expand...
Click to collapse
thanks. i can get in download mode still but dont have a jig, will that matter?
ZACQ8 said:
Yes, pick the laest official ROM from here for ODIN flash : http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
am i right in saying i need I9100XXLPS to go back to my original set up? sorry its been over a year since i did anything with an s2
sorry, misread your post, currently downloading the latest ROM and CF-Root-SGS2
tigerphil said:
i'd appreciate any help here
i stupidly used a root program outside the xda forum and soft bricked the phone.
afta recovering the phone its told me i need to update it, it will not update over the air and kies says its not supported for updating, can anyone help me get back to complete stock so i can start fresh???
my original details were
model- GT-I9100
android version- 4.0.3
baseband- I9100XXLPS
kernal- 3.0.15-I9100XWLP7-CL340913 [email protected] #3
build- IML74K.XWLP7
now my details are
model- GT-I9100
android version- 4.0.3
baseband- I9100XXLPH
kernal- 3.0.15-I9100XXLPH-CL118559 [email protected] #3
build- IML74K.XXLPH
obviously only the baseband, kernal and build have changed but anyone that can help me get back to complete original so i know it will update as and when needed, it will be much appreciated
Click to expand...
Click to collapse
Why did you use a method from outside of XDA? When you posted here, I responded with google searches that would have only returned results from XDA. The first result for the root search (for me, anyway) should have been the root method for ICS that didn't involve flashing anything with Odin.
ctomgee said:
Why did you use a method from outside of XDA? When you posted here, I responded with google searches that would have only returned results from XDA. The first result for the root search (for me, anyway) should have been the root method for ICS that didn't involve flashing anything with Odin.
Click to expand...
Click to collapse
i was being abit inpatient, i had found something outside xda between your msg but for the past hr i have been reading basically every page you sent through before re attempting anything
http://smartphonesgurudev.blogspot.in/2012/06/samsung-kies-how-to-update-official.html
Mizanur said:
http://smartphonesgurudev.blogspot.in/2012/06/samsung-kies-how-to-update-official.html
Click to expand...
Click to collapse
some useful tool in there!!! thanks alot! i am now back on the original firmware and kies is recognising it! i'll take some time now before trying to root it to remove some stock apps
Hello,
I have a Samsung Galaxy S3 GTi9300 and would like to root it (don't we all)
I just looked up the Baseband and Build number and found that it is using a Brazilian ROM, most odd since I bought this as sim free and unlocked from Amazon UK
The Baseband version is I9300UBELL1
The Kernel version is 3.31-789635
[email protected] #1
SMP PREEMPT Fri Jan 4 19:59:29 KST
2013
The Build number is
JZO54K.I9300UBEMA1
My question is can I use a BTU rooted rom GT-I9300-BTU-I9300XXEMC2 to replace the Brazilian one I have?
Will this work on my phone or do I have to download and install the rooted brazilian version of this rom?
Cheers
Basically all ROM out there is universal to galaxy s III unless the DEVer says it otherwise.
Just be careful with all those variants as American / Canadian S3, S3 international, S3 LTE. etc.
But in this case we are talking about International version which is GT-i9300
And actually, root it means put su binary and superuser control apps into system, it is not ROM related.
Sent from my GT-I9300 using xda premium
it's better if you just root your device
just be careful about the model of your device.
see ya
was erypems
BlokeUK said:
Hello,
I have a Samsung Galaxy S3 GTi9300 and would like to root it (don't we all)
I just looked up the Baseband and Build number and found that it is using a Brazilian ROM, most odd since I bought this as sim free and unlocked from Amazon UK
The Baseband version is I9300UBELL1
The Kernel version is 3.31-789635
[email protected] #1
SMP PREEMPT Fri Jan 4 19:59:29 KST
2013
The Build number is
JZO54K.I9300UBEMA1
My question is can I use a BTU rooted rom GT-I9300-BTU-I9300XXEMC2 to replace the Brazilian one I have?
Will this work on my phone or do I have
Framaroot worked for me one click root.
Click to expand...
Click to collapse
BlokeUK said:
Hello,
I have a Samsung Galaxy S3 GTi9300 and would like to root it (don't we all)
I just looked up the Baseband and Build number and found that it is using a Brazilian ROM, most odd since I bought this as sim free and unlocked from Amazon UK
The Baseband version is I9300UBELL1
The Kernel version is 3.31-789635
[email protected] #1
SMP PREEMPT Fri Jan 4 19:59:29 KST
2013
The Build number is
JZO54K.I9300UBEMA1
My question is can I use a BTU rooted rom GT-I9300-BTU-I9300XXEMC2 to replace the Brazilian one I have?
Will this work on my phone or do I have to download and install the rooted brazilian version of this rom?
Cheers
Click to expand...
Click to collapse
As long as the ROM is for the I9300/I9300T version of the SIII and you got an I9300/I9300T you can flash them, independent from which country they are. The only thing you might want to look at, if the ROM comes with a baseband from another country, is to maybe flash a baseband of your region (in case reception gets worse).
Read the FAQ for guides on how to flash, root, unroot etc.
And what is your point.? If your phone is working properly you dont have to care where your rom is.
Elsewhere to root you have guides on xda. And root has nothing to do directly with your problem you can flash à stock rom And modem with odin.
qtwrk said:
Basically all ROM out there is universal to galaxy s III unless the DEVer says it otherwise.
Just be careful with all those variants as American / Canadian S3, S3 international, S3 LTE. etc.
But in this case we are talking about International version which is GT-i9300
And actually, root it means put su binary and superuser control apps into system, it is not ROM related.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for clearing that up
The phone works fine I was just concerned that OTA updates would be for Brazil and not UK so figured I would put correct version of rom on my phone, I already downloaded I9300XXEMC2_BTU_i9300 from sam mobile.
Still find it odd tham Amazon.co.uk are selling the phones with non UK rom but it seems this doesn't matter
Thanks for help anyway, I am going to investigate other options mentioned in this post :fingers-crossed:
Striatum_bdr said:
And what is your point.? If your phone is working properly you dont have to care where your rom is.
Elsewhere to root you have guides on xda. And root has nothing to do directly with your problem you can flash à stock rom And modem with odin.
Click to expand...
Click to collapse
I wasn't sure if updates etc would work properly on OTA as I have a Brazilian rom
I had an S1 before this and only had phone a few days, my S1 was flashed with a custom rom, but baseband was always the same.
I want to root this so I can get native emocions by dropping the fonts in the relevant directory and also so I have a wider choice of what I want to run in the future regarding custom roms
chrismast said:
As long as the ROM is for the I9300/I9300T version of the SIII and you got an I9300/I9300T you can flash them, independent from which country they are. The only thing you might want to look at, if the ROM comes with a baseband from another country, is to maybe flash a baseband of your region (in case reception gets worse).
Read the FAQ for guides on how to flash, root, unroot etc.
Click to expand...
Click to collapse
Thanks for this reply, it tells me everything I was unsure about :victory:
The baseband is to do with csc?
Am I able to backup my curent rom and settings in unrooted form?
BlokeUK said:
Thanks for this reply, it tells me everything I was unsure about :victory:
The baseband is to do with csc?
Am I able to backup my curent rom and settings in unrooted form?
Click to expand...
Click to collapse
Just forget about CSC, it doesn't matter.
Yes, you can backup your current ROM and data via recovery
Sent from my GT-I9300 using xda premium
BlokeUK said:
I wasn't sure if updates etc would work properly on OTA as I have a Brazilian rom
I had an S1 before this and only had phone a few days, my S1 was flashed with a custom rom, but baseband was always the same.
I want to root this so I can get native emocions by dropping the fonts in the relevant directory and also so I have a wider choice of what I want to run in the future regarding custom roms
Click to expand...
Click to collapse
OTA updates the firmware you have if its Brazil then thats the update BTU then that's the update .
OTA will not update on rooted phones use Kies instead .
jje
qtwrk said:
Just forget about CSC, it doesn't matter.
Yes, you can backup your current ROM and data via recovery
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Baseband and CSC are two different things, don't worry about the CSC too much as said earlier, you only need to if you want OTA updates when unrooted . Baseband = modem.
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Baseband and CSC are two different things, don't worry about the CSC too much as said earlier, you only need to if you want OTA updates when unrooted . Baseband = modem.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for clearing this up
How can I tell if my current baseband will be compatible with the new UK BTU official samsung galaxy sIII rom?
BlokeUK said:
Thanks for clearing this up
How can I tell if my current baseband will be compatible with the new UK BTU official samsung galaxy sIII rom?
Click to expand...
Click to collapse
Usually all basebands are compatible with every rom (as long as you choose the correct android version). Hence just try and see if you reception is ok, otherwise flash a different one, there is a thread on the general section for that.
Sent from my GT-I9300 using xda app-developers app
Hello,
I'm french user with a S2 GT-I9100, with 4.1.2 samsung android rom...
Each day, my phone become very slowly slowly slowly..
*#1234# give me that :
PDA - I9100XWLSN
PHONE - I9100XXMS2
CSC - I9100XXLS8
Build Info : True Mar 19 18:57:45 KST 2013
I would like to reset the phone, with the last original Samsung Firmware for French user, with all the Samsung apk...
Could you give me a link ? I don't know which firmware to use, CWM, Modem and Kernel.
If you have a tutorial for me...
Which firmware is the last ?
I wanted to use Kies for update the phone but it only can see that i have a GT-I9100 when i connect it to pc, but the connexion failed each time...
Then, i need your help, because it's my wife phone and she never used it without bug... (and she wanted a iphone...)
Cordially.
xxx74 said:
Hello,
I'm french user with a S2 GT-I9100, with 4.1.2 samsung android rom...
Each day, my phone become very slowly slowly slowly..
*#1234# give me that :
PDA - I9100XWLSN
PHONE - I9100XXMS2
CSC - I9100XXLS8
Build Info : True Mar 19 18:57:45 KST 2013
I would like to reset the phone, with the last original Samsung Firmware for French user, with all the Samsung apk...
Could you give me a link ? I don't know which firmware to use, CWM, Modem and Kernel.
If you have a tutorial for me...
Which firmware is the last ?
I wanted to use Kies for update the phone but it only can see that i have a GT-I9100 when i connect it to pc, but the connexion failed each time...
Then, i need your help, because it's my wife phone and she never used it without bug... (and she wanted a iphone...)
Cordially.
Click to expand...
Click to collapse
This question has been asked at least one only this week.SEARCH!
GamingDj said:
This question has been asked at least one only this week.SEARCH!
Click to expand...
Click to collapse
Many thanks, Senior Member...
xxx74 said:
Many thanks, Senior Member...
Click to expand...
Click to collapse
BTW,latest stable firmware is XWLSS.Search on Sammobile,the on XDA how to flash.
GamingDj said:
BTW,latest stable firmware is XWLSS.Search on Sammobile,the on XDA how to flash.
Click to expand...
Click to collapse
Nope it's the xwlsu version which is the newest now.
Edit :it comes with fixes for camera and overheating issues.
Sent from my GT-I9100 using xda app-developers app