Related
tried to unlock bootloader
FAILED EPICALLY
in process, got the Doom something kernel for CM7
now since i failed,
i cant use my phone
for any of the other roms
since the kernel is there
ex.
2.3.3 x10a flashes, but does not work properly cuz of the kernel
help
edit 1
flashed azuzu kernel
works ok now BUT NOW IT SAYS MY SIM CARD IS NOT THERE
this would be believable with all the crap it went through.
but... it works on my old not smart phone phone
a Sony Ericsson Walkman
edit 2
fixed after three days of error and trying
note to everyone
for cm7
follow the damn instructions.
please
you see, i am 14 and i think i dont need instructions.
well follow them closely
if you have to copy and paste it to word
and triple space
bold underline
and KEEP ALL FLASHING CRAP IN THE FIRMWARE FOLDER FOR ONE!!!!!!!!!!!!!!!! FLASHTOOL that is running
i would make a video, but i am afraid that i wont be able to do it again
I have gone through this problem. just flash a 2.1 fw and unlock ur bootloader via onetouch program. Then via xrecovery flash a pre rooted 2.3 fw. And if you get ur baseband unavailable or no sim found on 2.3 rom just flash the 2.3 baseband via flashtool. then follow CM rom method. ur phone will be good to go.
sim lock = 3 UKi unlocked my bootloader using qsd8250_setool2
all went fine but after a while i noticed that my phone was unable to read my sim card
it was saying no sim card or insert a sim card
repaired to stock SE firmware using pc companion
still no sim card, no network
then again rooted my phone
unlocked my bootloader once again but used qsd8250_semc this time
got my network back
my phone is alive again
Having a few issues. Yesterday while using the twitter app, my Xperia X10 froze. I waited for like 5 minutes but it was still stuck so i took out the battery and put it back in. I restarted the phone and then my Wifi stopped working. After alot of reboots, wifi started to pick my wifi connection but then it would connect and give me limited connectivity. I did a few more reboots and then i think i went into xrecovery and by mistake recovered my phone to some earlier date which completely messed up my phone. Now i cant access my ROM i can only use xrecovery. If i try to load past the xrecovery, it shows the Sony Ericsson screen and then it goes blank, The notification light shows a white signal and then it restarts.. Then again it shows the SE Screen and again the white notification light and again restart.. this keeps on happening.
Anyway i decided it was time to install a new rom and it would solve my problems.. I put my phone in Xrecovery and tried to mount the SDcard but the memory card just wont show up on my computer for some reason..
Anyway then i took a card reader and put the roms on the root of my card and then put my card back into my phone.. After that i tried to install the custom zip but it gives me the error E: Cant mount /sdcard (device or resource busy)
WTF?
Can someone help me im clueless !!!
Okey i flashed the 2.1 Rom now.. Do i need to root my phone again? Do i need to install xrecovery again? :S
Hi if you flashed the stock 2.1 ROM then yes you will have to root the phone again and install xrecovery. I reckon you should update to 2.3.3 first using either flashtool, PC companion or SEUS which ever you prefer. Then root using flashtool 0.4.2 and install xrecovery using flashtool as well. Good luck hope this helps.
What rom do you use when phone froze? And why you flash first 2,1 rom? You must first flash 2.3, then root, install xrecovery, (unlock bootloaders if you want) and thats all
I was using 2.3.3 Wolfbreak i think ! Not sure.. Updated a 2-3 months back.
I flashed 2.1 because i read somewhere thats what people did when they got the mount sdcard problem in xrecovery.
Sorry if i sound like a noob but whats a bootloader and why would i unlock it?
Anyway im downloading 2.3.3 first and will then install xrecovery. I want to install one of the MIUI ROM's.. Which one should i install? Which one is the most stable and has the most features?
Unlocked bootloaders just allows change boot logo I think) And for miui I'd suggest oddie or a1exander roms, they are stable and everthing work
Sorry for bad english
Thanks !!!
Installing 2.3.3 right now. Will let you guys know if there's any problem.. Thanks again
Before you install xrecovery don't forget to root first I would use flashtool 0.4.2 for this check out the link http://forum.xda-developers.com/showthread.php?t=920746 The bootloader as i understand it is basically the very start of the bootup loads the kernel then the ROM loads. The white Sony Ericsson logo when you fist power on the phone is generated by the bootloader. A couple of reasons to unlock the bootloader are to load custom kernels faster an they are more stable this way instead of the bootloader bypass method. Some ROM's e.g Cyanogenmod need an unlocked bootloader I believe. BEWARE I heard of people bricking there phone during the unlock process i would do plenty of research before unlocking. I would have a read of these threads before unlocking your bootloader http://forum.xda-developers.com/showthread.php?t=1254087 http://forum.xda-developers.com/showthread.php?t=1253277&highlight=unlock+bootloader+proper+method . I still have not been game enough to unlock my bootloader yet phone still under warranty thought. Good luck nothing wrong with being a noob we all start some where I am a noob too just with lots of reading and experimentation behind me.
Thanks !
Okey well im going for this:
1. Flash 2.3.3 Rom using flashtool
2. Install xrecovery using flash tool
3. Install Alexander's miui by using custom zip in xrecovery (right?)
That should be it? Do i really need to unlock boot loader? Dont really want to mess anything up
Firts root and then install xrecovery Don't install Alexander miui version 11, wait tomorow. 11v have many bugs:/ Don't afraid nulock bootloaders, just read instructions, not rush and everything be okay
Forry for bad english.
2.3.3 installed.
Trying to root it, But flashtool's root button is greyed out ?
Installl drivers from flashtool folder?
Done but still greyed out.. Also enabled USB debugging and unknown applications in the phone
Here http://forum.xda-developers.com/showthread.php?t=1196808 read instructions and be happy You must first install kernel I think:/
How do i install kernel ?
You don't need to install a kernel yet you have the stock kernel installed already from the 2.3.3 install. Have you put the phone in flash mode before you try and root it. If not put it in flash mode then try and root. Note the op posted is using the old version of flashtool so it will look a bit different.
In that post all write just read You know how put phone in flash mode?
Nope.. The root option in flashtool is just greyed out no matter if im in flash mode or not.
My kernel is 2.6.29-00054-g5f01537 [email protected] #1
Android: 2.3.3
Baseband: 2.1.71
Buildnumber: 3.0.1.G.0.75
I hope i flashed the correct 2.3.3 rom? I had a 2.3.3 rom by the name of x10_2.3_aro.ftf I flashed that.
Don't understand. Just follow intructions in my link. No matter that flashtool version old, it makes their job.
Sorry for bad english.
OK I think you need to go back to basics download Sony PC companion and update or repair your firmware from there that way you know you had the right version of firmware for your phone. Firmware can be carrier dependant. Once this is done then try to root using flashtool
Sent from my X10i using XDA App
guys i just root my X10 mini and i need upgrading android to 2.3...does need to create ROM or just download android 2.3 file install it???i need your respone and a helping hand...thanks
Please use the search function the next time. For your convenience Click Here
And try this custom ROM for starters. It doesn't require you to unlock boot loader and install a custom kernel.
and when you know how to use the search function then I know for sure you can manage to unlock your boot loader and can flash a custom ROM
lol. they will so kill you for this question. It's forbidden to be a noob in these forums.
Here are the steps you must follow in "search" terms:
1. Root (obviously you already did).
2. Unlock bootloader. (google the hell out of it, search these forums. To install a new rom you need to install a new kernel. For a new kernel you need to unlock the bootloader. Search "How to Unlock the bootloader"). You will need your PC.
3. Flash a new Kernel and Install CWM recovery. Generally just flashing the kernel takes care of the CWM installation. (It's some kind of android bios you must install first thing after having unlocked the bootloader. Check "flashtools" and "how to flash a kernel" guides). You'll need your PC.
4. Flash the ROM. It's the easiest part. It's done by hard reseting the phone. check "How to flash a ROM".
gl dude.
There's nothing wrong with being noobish. Everyone is a noob at some point. This is my first Android anything and I knew absolutely nothing before I came here: "Root? Custom rom? ClockworkMod Recovery? What the hell does any of it mean?!"
But there's a fine line between asking noob questions and asking noob questions without doing any research. But hey..at least the OP was polite.
Ticklefish said:
There's nothing wrong with being noobish. Everyone is a noob at some point. This is my first Android anything and I knew absolutely nothing before I came here: "Root? Custom rom? ClockworkMod Recovery? What the hell does any of it mean?!"
But there's a fine line between asking noob questions and asking noob questions without doing any research. But hey..at least the OP was polite.
Click to expand...
Click to collapse
the line would be drawn like n00b vs n3wbi3. n00b - as what my sig says and n3wbi3 - doesn't ask unless there's a prob or question that needs to be clarified. i was once a n00b but know where to start and that is hitting the start button.
How does i upgrade my xperia x10 mini to 2.3 android
Dear sir,
i want to upgrade to my xperia x10 mini to android 2.3.
presenently i have 2.1 in my phone.
am already done rooting.
i have total size of my sd card 8g.b. in that i done second partition in EXT2 2g.b.
if i upgrade to 2.3, which memory is using for as internal memory?
plz tell about how i upgrade to 2.3, with step by step and screen shots. plzzzzzzzzz sirr
Well,i think there was a thread on that somewhere dont rember where though anyway,,
First go to the x10 mini pro android devolpment forums and download cwm recovery installer after that its pretty simple for android 2:3 I suggest minicm7 if u go to its post it will tell you all steps and to open cwm u click back button while ur phone opening
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
arey bhai itna chila kyon raha hai.....
aaram se bol na
rajubehappy said:
plz tell about how i upgrade to 2.3, with step by step and screen shots. plzzzzzzzzz sirr
Click to expand...
Click to collapse
that would be time consuming to post step by step with screenshots. better do it yourself first and ask the community if you ran into a prob. that way youll learn. and please use the search function. there are lots of guide that you can use you just have to look for it. remember no pain no gain.
Dear sir,
I already done as ur steps but i get many problems.
After unlock bootloader i not get network signal, but i continue ur procedure and done flash and open in CWM clockmode i install Update.zip. and after switch off and on. but its not working. my phone shows in WHITE LETTERS "Sony Ericsson" its not boot and not off.
plz sir give me solution plzzzzzzzzzzzzzzzzzzzzz
as i see you have a simlock first unlock your sim and then unlock bootloader install kernel and then gingerbread
demoniacs said:
And try this custom ROM for starters. It doesn't require you to unlock boot loader and install a custom kernel.
Click to expand...
Click to collapse
Doing your research... Just about every current iteration of GB-Roms for the X10Mini requires a custom kernel, The installation instructions for the ROM you linked to clearly states to unlock the bootloader and install nAa-08 kernel.
If you want to point people to ROMS that run on stock kernel, stick to froyo/CM6.
plz reply me
plz answer my problem
First of all, you lost your network-capability when you unlocked your bootloader, so i hope you made a backup of your orignal firmware. Restore that and then relock the bootloader, your network capability should hopefully come back
You can't run any Gingerbread roms if you're on the X10Mini with a locked bootloader, you'll have to stick with older Froyo (2.2) Roms, just make sure the ROM you choose does not require a custom kernel. The older ones probably have to be installed with Xrecovery too, instead of CWM, use flashtool to get XRecovery onto your phone.
rajubehappy said:
Dear sir,
I already done as ur steps but i get many problems.
After unlock bootloader i not get network signal, but i continue ur procedure and done flash and open in CWM clockmode i install Update.zip. and after switch off and on. but its not working. my phone shows in WHITE LETTERS "Sony Ericsson" its not boot and not off.
plz sir give me solution plzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
It isnt SIM lock, it is SEMC SIMLOCK CERTFICATE. Try S1Tool what it says.
I have the same problem and I solve like in this tread http://forum.xda-developers.com/showthread.php?t=1254225
mightyoutlaw said:
It isnt SIM lock, it is SEMC SIMLOCK CERTFICATE. Try S1Tool what it says.
I have the same problem and I solve like in this tread http://forum.xda-developers.com/showthread.php?t=1254225
Click to expand...
Click to collapse
No need to shout, not every x10 mini or x10mini pro comes with a semc-simlock certificate, if your phone is simlocked by your provider, s1tool gives you simlock-certificate not recognised.
If you unlock the bootloader on such a phone, it is most likely it will disable your radio-capability.
So everytime someone unlocks their bootloader and gets no service anymore, relocking is the only option, and then sim-unlock their phone using Omnius, or (the safest way) with an EMMA/IMEI code from their network-provider.
After that you can unlock the bootloader safely.
problem occured in upgrading
dear sir i already locked my boot loader. but i cant upgrade firmware or flash through sony companion and SEUS. how can i upgrade or restore my firmware. its shown only "Sony Ericsson" in WHITE LETTERS. plz resolve my problem.
its occured any error in flashing? any different kernal is there?
I am on custom ROM right now, phone is rooted though and just unlocked the bootloader a couple days back. I was wondering, if I flashed the nAa-11 kernel, will I still be able to use stock ROM on it until I install some GB ROM? Or do I have to flash the GB ROM right after flashing the nAa-11 kernel for the phone to work?
Just for the record, I like doing one thing at a time then checking if phone is fully stable before moving to the next step... Makes me TOO nervous
The ROM's are all compiled against a particular kernel, so stock rom won't work on the nAa-kernel, and most GB-roms won't work on the stock kernel.
You want to flash the nAa-11 kernel, do a reboot, and press the back-button several times until you get into CWM That's as sure as you can be that everything is stable at that point.
Then you can do the usual steps for installing the ROM, (Wipe data, cache, etc., install from sd-card)
If you forgot to put the ROM on your sd-card you can connect your phone through CWM in the mounts and storage section, mount usb-storage) and then copy the ROM to your phone.
Hello,
I flashed the most recent MiniCM9-3.0.2 ROM with nAa ICS kernel and followed all steps carefully. Everything works except i get no service. I can find the service network (vodafone) but i cannot connect to it. I've tried to go back to stock kernel and miniCMPro 21 and i get no service as well. Any help?
Thanks
nvm... I figured it was a bootloader-issue, but i guess since you can still find the network your gsm is still working.
In any case, you're on stock rom, try relocking your bootloader and see if you can connect to the network then (Restore-button in S1-Tool)
Hi,
I'll try to restore and see if it works.
Thanks for the help.
Hi,
I restored and reinstalled CM9 and now everything is working! Thanks
i am in exactly the same boat, just flashed same rom and same kernal and now no service, i also was under the impression if i unlocked the bootloader it unlocked phone to all networks but my virgin sim would not work either, the phone was originally on orange and my orange sim worked before i done this, what do i need to do guys just flash back stock rom, if so where can i find this, thanks!
You need to use PC Companion or SEUS from Sony Ericsson to repair your phone, and then relock your bootloader with the Restore-button in S1Tool.
There is a big difference between sim-unlocking your phone, and boot-unlocking your phone.
The first one will allow you to go on other networks, the second one will allow you to flash a custom kernel.
If you want to unlock your bootloader, follow the tutorial and make sure your simlock-certificate is compatible, otherwise, obtain an EMMA/IMEI code from your provider to get your phone on other networks. In that case you can unlock your bootloader too.
There are plenty of warnings in the bootloader-unlock tutorial to prevent you from bricking your phone, if you don't understand the options that are there, don't mess with your phone.
iv tried using the repair function of pc companion but it just says no updates available for this phone, and i cant seem to find SEUS can anyone point me in the right direction please.
think i made a mistake last night though while messing, i locked the bootloader back up, had the capital R where needed, but i had a custom rom but i had flashed back the stock kernel by mistake, now the phone sits with sony ericsson on screen and doesnt do anything else, been that way for hours now, any help really appreciated!
Hi
I had the same problem. The easy way is to put the phone back to stck and start all over again. You can find SEUS here (search on google)
update_service_setup-2.11.4.11.exe
After install it just follow the instructions. When it says no update was found just click next anyway. it will restore the phone. And then start from that point:
unlock bootloader, flash kernel and install new Rom imediatly after flash kernel. DONT LET YOU PHONE START WIHT OTHER ROM OTHERWISE IT WILL GET THE SMA PROBLEM! Put the ROM file in the SD card and after install new kernel go imediatley to CWM and install the ROM.
It should work!
cheers mate iv just downloaded it and run it, this is all that happens once i restart in flashmode, any ideas
Go to the Development section for your phone in this forum and try to find a ROM that is based on the stock rom (I think you should still be able to nstall xRecovery on your phone and enter it), then flash it just like you would other custom roms.
how can i go about installing xrecovery mate as i cant access phone the way it is, i can get it into flashmode, using the power and home button then using back quickly after i restart, iv tried flashing a custom kernel back onto it too from flashtool but it gives an error and doesnt do anything, if only i could get that kernel back on at least just to get it out of the freezing!
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
SmG67 said:
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
Click to expand...
Click to collapse
its saying device connected with usb debugging off, lol, what now, is there anyway to flash back to stock via flashtool as i have stock e10i 2.1 uk stock rom, if so how mate, appreciate the help! iv really jumped in at the deep end and got all confused, used to flashing samsungs!
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
SmG67 said:
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
Click to expand...
Click to collapse
its the x10 mini mate, e10 model!
ok hang on
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Theliakos said:
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Click to expand...
Click to collapse
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
big-hol said:
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
Click to expand...
Click to collapse
Check your inbox
ok guys this is what im getting when trying to flash stock rom via flash tool
Hello fellows,
I decided recently to root my Xperia X10i device, and ditch the sonyericsson gingerbread official rom. I installed Flashtool, and rooted my phone successfully. However when I chose to Flash either a custom Kernel, or "X10-custom-ftf" I keep getting this weird message ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed". This happened yesterday and today. Yesterday my phone was stuck at the text Sony Ericsson, and I managed to re-install the original firmware again using SEUS. Today I am following the steps in this guide to install FreeXperia custom rom but I am always stuck when I get into "Flash" step with this silly message!
I searched a lot for the reason of this message but with no clue!! Is there any clue for the reason of this message, and how can I overcome it? I would really appreciate your responses. Thanks
No Replies!
77 viewed my post and no one replied!! Is the problem this hard?!
You need to be patient my friend, sometimes they looking solutions for ya. And I want to ask, did you installed recovery before flashing? If yes, what kinda flashtool version you used? Your question is similar and less to be encountered honestly, not with azuzu and doomlord's flashtool.
IMPORTANT: MOSTLY THAT HAPPENED IF YOU accidentally/forgot that you FLASHED KERNEL (For UNLOCKED Bootloader) on your X10 WHICH IS LOCKED BOOTLOADER. KERNEL WILL FAILED TO OPERATE NORMALLY if you just flash custom kernels if forgot to unlock bootloader. Hope helps.
PS:Try download these [2.3.3 Kernel + Baseband Here] Flash it and see whether it's successfully flashed. If yes, should back to SE LOGO and don't waste time, repeat-press "Back" button, to return to Xrecovery and flash your Locked Bootloaded Custom ROM/Backup ROM Nandroid via xrecovery. Should have boot normally.
Whitefang
After rooting your x10 did you unlock your bootloader? If not then thats why it wont flash there are guides on here ti help you unlock the bootloader and be able to flash custom kernels
Sent from my Xperia X10 using XDA
Try this http://forum.xda-developers.com/showthread.php?t=1254087
Sent from my Xperia X10 using XDA